Database Info

i9003 stock rom loop reboot and can t be detected by pc while other mobiles are

Please i need help i m not sure what to do the problem is my phone suddenly started rebooting and went into loop and whenever i open playstore it tells me force close vending error and also my pc can t detect my phone sometimes it says device not recognized and sometimes it says can be used but nothing happening...
- downloaded kies all drivers nothing working
- tried changing cable but didn t work while on other samsungs it worked well nromal
- tried debugg mode mass storage everything that was suggested here in xda and on other sites
- z4root and gingerbreAk not working
Want to root it to flash better firmware vut since i can t detected on pc to root it i was trying to look for a root without pc
I m not sure what to do ... tried odin and download mode not working to detect device and also recovery mode cleared cash and rest factory not workin
Plz i don t want to lose my phone
My phone i9003 not rooted no custom room just only stock rom running gingerbeard 2.3.6
So the problem is the looping reboot that happens suddenly and unablity to connect it to pc to flash cmod 10.1
I was wondering if there is any way to repair/fix my phone or at least root it to flash better rom ?
Thank you very much

-''- Same here.
Try to fix it by Odin with Nand Erase all, no love
Reboot automatically after 'SAMSUNG' LOGO shown up

K9998 said:
-''- Same here.
Try to fix it by Odin with Nand Erase all, no love
Reboot automatically after 'SAMSUNG' LOGO shown up
Click to expand...
Click to collapse
but i can t connect my pc in all modes to use odin

Shady282 said:
but i can t connect my pc in all modes to use odin
Click to expand...
Click to collapse
I fixed it already.
try read this:
http://forum.xda-developers.com/showthread.php?t=1651619
I simply remove the internal memory and flash a custom phone image, it usable but without external memory.
If you cannot connect to the odin3, use Fastboot mode

[q] is there any hope left for my tab?

problem began after i factory reset the tab, my tab keeps rebooting everytime either when i connecting to a wifi network/turning off the wifi/going to settings. then it freezes, and shows the samsung logo indefinitely.
when i force reboot it no longer goes into the system but only to samsung logo. i had to factory reset everytime to get into welcome screen.
the tab also have a usb connection issue as it wont get detected by the pc
odin pro is available but kinda useless since it still have to download specific files the tab for it to work
my tab is currently running on 4.1.2 P6800DXMD3 with skyhigh 3.9.1 kernel.no custom recovery
hope my english is good enough
anybody here can help me?

1. Try wipe cache in recovery and flash stock kernel.
2. Try flash full official firmware package with Odin PC. You may need to factory reset again in recovery before first boot.
Best of luck
Sent from my GT-I9500 using XDA Premium 4 mobile app

UpInTheAir said:
1. Try wipe cache in recovery and flash stock kernel.
2. Try flash full official firmware package with Odin PC. You may need to factory reset again in recovery before first boot.
Best of luck
Sent from my GT-I9500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
1. flash stock kernel via stock recovery? is that possible?
2. my tab just wont connect to pc. it just wont get detected. this is why my tab is in a ****hole right now.

mellovicious said:
1. flash stock kernel via stock recovery? is that possible?
2. my tab just wont connect to pc. it just wont get detected. this is why my tab is in a ****hole right now.
Click to expand...
Click to collapse
You didn't say (and haven't said) it wouldn't connect in Download Mode. I didn't assume.....
- Make sure you have both the latest Samsung USB and ADB drivers installed. Uninstall old ones, reboot, install new and reboot.
- Have you checked your USB cable is ok?
If you can't enter download mode, you could be hurting.
- If all you can do is enter stock recovery, and if you had USB debugging enabled, maybe it's possible to push to system and preload etc. with ADB.
Sent from my GT-I9500 using XDA Premium 4 mobile app

UpInTheAir said:
You didn't say (and haven't said) it wouldn't connect in Download Mode. I didn't assume.....
- Make sure you have both the latest Samsung USB and ADB drivers installed. Uninstall old ones, reboot, install new and reboot.
will try~
- Have you checked your USB cable is ok?
bought a new one just for the sake of this
If you can't enter download mode, you could be hurting.
my tab can enter download mode but odin wont detect it.
- If all you can do is enter stock recovery, and if you had USB debugging enabled, maybe it's possible to push to system and preload etc. with ADB.
im gonna assume usb debugging is disabled since i factory reset the tab. so the setting must have been reset as well? but then i cant to to settings then the tab would freeze.
Sent from my GT-I9500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
im sure this is some kind of wifi bug if i just can flash the firmware it would be resolve but damn the cable really giving me a headache

my tab wont get detected by any of the pc i tried to connect it with.
i dont know what am i supposed to do anymore

mellovicious said:
my tab wont get detected by any of the pc i tried to connect it with.
i dont know what am i supposed to do anymore
Click to expand...
Click to collapse
Not sure is this will help but can you put the source files on an SD card and then use mobile odin pro to flash files then maybe you can get the tab to work. Best of luck.:fingers-crossed:

ColBill said:
Not sure is this will help but can you put the source files on an SD card and then use mobile odin pro to flash files then maybe you can get the tab to work. Best of luck.:fingers-crossed:
Click to expand...
Click to collapse
thanks for suggestion but i already resolve the prob :victory:
mobile odin still havent download the specific files for the tab so most of its features doesnt work. it doesnt even read files for sd card (not sure why)
but luckily i was able to flash custom recovery (twrp recovery) through it. so i had to push the files in via bluetooth from my phone.
well once in recovery just do all the usual stuff to flash the rom. using pac man right now. really wanted to use stock but i scared the bug would come again.
mobile odin literally saved my tab

[Q] My galaxy i9003 soft bricked???

Hi
Some help please, I installed cm 11, on my i9003 from DDMF1, I HAD lot of bugs in it, camera bug in third party app, battery drain, i decided switch back to cm 10.2.
Here what i did wrong, i flashed straight from CM through cwm, i got aborted error, then i gave up, my phone drains in 2 hrs, so i tried to install DDMF! from back up of cwm.
it didnt work either, now phone stuck at samsung logo, it doesnt switch off too, i have to remove battery to switch it off,
i tried some searching in forum downloaded DDLF2 , phone goes to download mode, but my pc cant recognize it, it says unknown device.
reinstalled kies and drivers no use. now am stuck.
please advice, sorry if my english is bit bad

Have you tried to uninstall drivers from pc then reinstall them, then reboot your PC?

catarifrangente said:
Have you tried to uninstall drivers from pc then reinstall them, then reboot your PC?
Click to expand...
Click to collapse
Hi tried it n times, finally succeded flash to GB.. My device is up, Thank you all

prabuflash said:
Hi tried it n times, finally succeded flash to GB.. My device is up, Thank you all
Click to expand...
Click to collapse
happy that ur device is up
some times jz installing drivers wont help for odin to detect device... turm the internet on while plugging ur device to pc in usn debuging mode so that pc can download required files immediately... and it will help in detecting odin jz in the first try

Galaxy Sl boot loop after physical Damage

At first I should say that it is not my phone and don't know how exactly what happened to it
One of my friend gave it to me and told that after dropping from 1meter on the ground phone
start auto rest some times in day and after one month it got boot loop.
he take the phone to a person to fix but that guy
Said :the hard don't work.
so he decided to buy a new phone and now he asked me to find a way for fixing.
I don't believe that the hard don't work cuz I have damaged my phone hard by repapartitioning from Emmc to MTD.if the hard dosent work the phone shouldn't turn on.
Now I have a galaxy sl which could be turned on and can go to downloading mod. what should I do? his owner said he have flashed a Rom once but no result.
is there a way for fixing?

We can't say if there is a hardware damage, for sure. But, if you want to flash a new firmware, check this thread. http://forum.xda-developers.com/showthread.php?t=1894737
If the phone works well after flashing new rom, then all is fine. If not, you can go to Samsung's service center and get it checked.

jitendragarg said:
We can't say if there is a hardware damage, for sure. But, if you want to flash a new firmware, check this thread. http://forum.xda-developers.com/showthread.php?t=1894737
If the phone works well after flashing new rom, then all is fine. If not, you can go to Samsung's service center and get it checked.
Click to expand...
Click to collapse
Unfortunately the pc say it is unknown device I have tried different ways but no result...
Is there a way to install the cwm from stock recovery?

As far as I know, you need to connect your phone to pc to install any cwm. try reinstalling the Samsung mobile drivers, and reconnecting the phone in download mode. as long as odin detects phone in download mode, everything else is secondary.

if the internal sd is gone just stick in an external one and try flash a new rom it will install to external sd (if works like the i9000)
have you installed kies or the usb driver only package ?

ziointrud3r said:
if the internal sd is gone just stick in an external one and try flash a new rom it will install to external sd (if works like the i9000)
have you installed kies or the usb driver only package ?
Click to expand...
Click to collapse
the sd card work(dont know about internal)and when i go to stock recovery it detects but. ihave installed samsung usb driver
and i had galaxy s3 too so i know how does samsung devices work..i am wondering is ther a way to install clockwork recovery on galaxy sl with stock recovery...cuz when the phone go to download mod windows says unkown device .
i dont know what should i do

with odin 1.85 or 1.83(later versions seems to have some issues with this phone) even if windows doesn't recognize the phone it must be shown as a connected com port (with my original rom the phone has never been recognized by the sistem)
if this dosen't occur i think you cuold try to use hendmall on any linux live distro or adb but with standard recovery i don't know if you can access the phone trought it
the install update from .zip in standard recovery if i remember well dosen't workin this case it gives error probably because the original samsung rom packages are recognized by the SS_DL.dll or any other file inside of it inside all the official roms but this is just my modest opinion i'm not sure at 100% on the ddl story you have nothing to loose anyway so you can give a try with this way

Screwed something up, HELP needed please

Howdy,
I've screwed up with installing a custom rom over another custom.
Now I'm getting an error:
Firmware upgrade encountered an issue. Please select recovery mode in kies & try again.
It's a tablet:
Samsung Galaxy Tab 2 10.1 (p5100)
In my computer im using windows 10 pro, and adb device is not regonized.
What I neeed to do to get pasted that error?
Thanks for the help!

There is nothing to worry.
It is easy to solve this.
Just download Odin in your pc.
Download the official firmware if your device here.
http://www.sammobile.com/firmwares/database/GT-P5100/
Now open Odin In pc
Connect your device to the pc .
Now in the app under PDA browse for the firmware you have downloaded and click start.
Wait till it says pass.
That's it you have successfully solved your problem.
Now it will take some time to boot.
In case you feel that you are in a bootloop just go to recovery and perform a factory reset .
Odin download http://odindownload.com/download/Odin3_v3.10.6.zip
HIT THANKS IF THIS HELPED YOU :good:

OOO thanks for the reply.
But I'm getting trouble to get into Download Mode, I mean I can't get in no matter what I do.
I've attacked a screen which I thing that Odin get's the device. Is this ok?
Thanks for the support!
_______
I've just flashed the TWRP recovery over the old one and know it works! YAY.... ODIN FTW
Zte blade l said:
There is nothing to worry.
It is easy to solve this.
Just download Odin in your pc.
Download the official firmware if your device here.
http://www.sammobile.com/firmwares/database/GT-P5100/
Now open Odin In pc
Connect your device to the pc .
Now in the app under PDA browse for the firmware you have downloaded and click start.
Wait till it says pass.
That's it you have successfully solved your problem.
Now it will take some time to boot.
In case you feel that you are in a bootloop just go to recovery and perform a factory reset .
Odin download http://odindownload.com/download/Odin3_v3.10.6.zip
HIT THANKS IF THIS HELPED YOU :good:
Click to expand...
Click to collapse

Greetings;
I don't know if you already entered Download Mode...
Most problems accessing Recovery and Download Modes are due to having the USB Cable connected.
Remove the cable; press the key combination; and it will boot.
(Except if there's some incompatible ROM flashed by mistake).
After that plug the USB Cable again (if your USB Drivers have also installed for Download Mode) Odin will recognize it (like shown in your Screen Shot).
REMEMBER:
While Flashing do NOT Remove USB Cable, untill Odin Displays "Pass" message.
Further issues: Let us know. We're would be Glad to help.