i had to change my display and touch panel. when i got it back from customer care this occured :
- people cant listen to me in phone call . both in dialed and received .
- during calls , screen goes back
- if i turn off the proximity , blackout fixes .
- if i turn off dual mic noise reduction , they can listen...... but my voice is not clear... sometimes shattered
- i tried with earphone , this time i don't need to turn off proximity or noise reduction...... but my voice isn't still clear and shattered
I'm not sure if its a software or hardware issue.... I'm getting kitkat next week... so software issue will be fixed... but if its a hardware problem , then i need to go for customer care...... that's very very weird to me... what to do ?
have you rooted your phone? if thats the case it just might be a bug install new rom!
Hello everyone. It's a couple of days I have facing this weird issue: when I make a phone call on the other side they can't hear me properly, it's not a matter of volume but of quality and the conversation results very difficult, instead, if I turn on the loudspeaker they can hear me. If I come back to the speakerphone sometime they can hear me, sometime not.
So I tought it's an hardware issue and I tried to record my voice with an audiorecorer app forcing it to use the principal microphone and it never fails.
Now that the hardware issue it's excluded I started thinking about a software issue or maybe some conflicts between apps.
At the end it turns out it was the "Ok google" detection to enter in conflict with the main microphone and deactivating it solved the issue.
Now, because I use it a lot but, at the same time, a phone is intended to make phone calls, is there anyone facing the same issue? Did someone find a workaround to make them both working?
P.s.: I'm on latest slimLP, AK 131 and latest firmware from CM12.
facing the same problem
I have the same issue with the call quality. I'm on roaming for the past 2 days. This problem started when I received a call using the headset connected. Now even when the headset is not present, the person on the other end keeps complaining about the voice vibrating. Putting on speaker fixes it but going back to the regular earpiece brings the problem back. Another thing I noticed is during the call the volume rocker doesn't have any control over the volume. The sliders goes up and down but the volume is unaffected. I have tried rebooting the phone and clearing cache many times now. Waiting for someone with a solution.
I'm on stock CM11S rooted with xposed installed.
Facing the same issue
This issue has cropped up all of a sudden recently for me too. The people on the other side of the call say they cant hear me. Occasionally some calls go through just fine though. Tested mic with recording software and it records voice just fine! I'm on the latest Sabermod with AK Kernel.
Uninstall any call recording app and try again.
Sent from my A0001 using Tapatalk
I have the same problem from time to time. CM12 nightlies. Very annoying. Sometimes it is OK sometimes not.
Martin-Doc said:
Uninstall any call recording app and try again.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
When I first noticed it I had no call recording app installed neither I have now. It was fixed disabling "ok google" detection.
Thanks for the tip. I just disabled 'OK Google' detection in 'any screens'. Let us see whether it fixes the problem.
I tried uninstalling the hangouts dialer and then reinstalling it. So far it looks fine. Will update if i get the problem again.
Flyingdaddy said:
Thanks for the tip. I just disabled 'OK Google' detection in 'any screens'. Let us see whether it fixes the problem.
Click to expand...
Click to collapse
So you left ON the "ok google" on the app? What about phone calls? Do they seem fine?
Yes I left OK Google in the Google app. I only disabled it for every screen. It seems to work OK. Hope I'm clear (I' m French)
Flyingdaddy said:
Yes I left OK Google in the Google app. I only disabled it for every screen. It seems to work OK. Hope I'm clear (I' m French)
Click to expand...
Click to collapse
I'm Italian so we are on the same boat!
Ok so now I'll try activating it too for the app only, let's see how it goes.
P.s.: Tried to make a phone call and it works flawlessly. I hope CM fixes this bug soon!
Awesome, got this problem out of the blue, and disabling Google voice everywhere fixed it. Thanks!
After two day of testing this modification issue of the same bug one the LG G2 works perfectly in all situation during call ( headset, voicecall etc.. ) and doesn't decrease quality on other apps like camera, skype etc..
in Cm12 build.prop replace this two line :
ro.qc.sdk.audio.fluencetype=fluence
persist.audio.fluence.voicecall=true
With this:
ro.qc.sdk.audio.ssr=false
ro.qc.sdk.audio.fluencetype=fluence
persist.audio.fluence.mode=endfire
persist.audio.handset.mic=digital
persist.audio.voicecall.mic=0
persist.audio.voice.clarity=none
persist.audio.aanc.enable=false
persist.audio.handset_rx_type=DEFAULT
persist.audio.nsenabled=ON
persist.speaker.prot.enable=false
persist.audio.spkcall_2mic=OFF
Infinityyy said:
Awesome, got this problem out of the blue, and disabling Google voice everywhere fixed it. Thanks!
Click to expand...
Click to collapse
Many thanks to @sambaeallegria who first proposed this solution
thank you @sambaeallegria i also got this problem out of the blue and your tip fixed it!
many thanks
Today I received an update for "google app" from play store but I can't try now to make a call. Did someone noticed any improvement activating "ok google everywhere"?
Flyingdaddy said:
Yes I left OK Google in the Google app. I only disabled it for every screen. It seems to work OK. Hope I'm clear (I' m French)
Click to expand...
Click to collapse
How to disable "ok google everywhere"?
blank420 said:
How to disable "ok google everywhere"?
Click to expand...
Click to collapse
Go to google search settings, then voice, "ok google" recognition and left enabled only the first slider (from app).
sambaeallegria said:
Go to google search settings, then voice, "ok google" recognition and left enabled only the first slider (from app).
Click to expand...
Click to collapse
Thanks!
Hi everyone,
I've been on stock roms since I got my Nexus 5 (almost two years, so it's still on warranty [local law]), and since I updated to 6.0, I started having issues with the proximity sensor. Sometimes it wouldn't turn off the screen in calls, and it would generally stop working (I use gravity screen, which relies heavily on the proximity sensor, so that allowed me to become more aware of the problem. The proximity sensor would resume normal operation after a while.
I googled the issue, and apparently it's common since the 6.0 update, so I assumed a software bug. Anyway, last night the problem got worse. For example, if I was playing a video on youtube, with audio coming from the speakers (didn't try with headphones), the video would go silent. It can happen during playback (suddenly it just goes silent) or you start the video and it is silent. Other media apps report the same behaviour. This is an on/off problem, as it might or might not occur.
Also, during calls, it also started silencing the phone speaker. As with all the problems I reported, this is on/off. When the phone speaker is silent, the proximity sensor stops working. When this happens, I'm able to use the speaker phone to actually engage in the conversations.
Another thing that is really weird is that, if a media app stops reproducing sound (although sound should be playing), and I start a phone call immediately, the phone speaker will not emit sound but if I change it to speaker phone (audio coming from the speakers) the speakers work fine!
I've since flashed CWM recovery and a cyanogenmod snapshot (cm-12.1-20150901-SNAPSHOT-YOG4PAO237-hammerhead.zip) and the problem persists!
I'm writing this thread in the hopes that someone might know a fix for these issues, or if someone knows if these are common. Otherwise, I'll have to send the phone for warranty...
I searched around for this problem and couldn't find a reference to it. I was not very thorough, however, so I apologize if I missed something.
TL;DR - Having some issues regarding the proximity sensor (it stops working and resumes working for no reason) and when this happens, no sound comes out of the phone speaker during calls and no sound comes from the speakers during media playback. When the problem happens during a call, the speaker phone can be activated to interact with the other person. Does anyone know anyone that might be experiencing the same issues?
Thanks!
When listening to a WhatsApp Voice Message via earpiece (i.e. proximity sensor) and another message arrives or any other notification, the audio is routed to the louder speaker for few seconds (length of notification audio) then routed back earpiece. So everybody around will hear that audio message.
This is extremely annoying is privacy disaster . Is it happening anyone ? Does anyone know how to solve?
Phone: Xiaomi Mi 5
All roms are affected (even AOSP ROMs)
i face this problem too. i feel that it is not whatsapp's problem but how the firmware handles notifications itself. i may be wrong though
Any thoughts of this guy's?
I have the exact same problem on my Nexus6P for a while. I'm not sure, but I think since I bought it. The same happened to a friend of mine with his Nexus5X. Haven't been able to solve it yet.
My only workaround is to react quickly to take the phone off my ear and resume the audio once the notification ringtone has finished playing.
no luck so far? I wonder how is this tolerated by millions of users? it's quite annoying :crying:
Sound
I got this problem too, but only in LineageOS builds, and I've reported this to the developer of my ROM (Moto G4 Play - Harpia) and he didn't understand the issue. On Pixel Experience ROM there ir no such a problem.
Hi,
So when making a call the other person can't hear me or hears me very low. I figured out that if I move my face away from the proximity sensor the mic works normally. The fact that some people say they can hear me very low could mean that one mic at the top of the phone is not affected.
Is there a setting anyone can suggest or a way to reset the settings without doing a factory reset.
This might have happened after a recent update.
Thanks.