Database Info

[Q] CM,Please help

Dear i have device E210L which is korean galaxy s3 with 2gb ram..i realy want to use Cynogen Mode on.can somebody help me how to use it or any other rom then official because it has many korean apps running which are quit annoying please help me if some one know..

sajjad30 said:
Dear i have device E210L which is korean galaxy s3 with 2gb ram..i realy want to use Cynogen Mode on.can somebody help me how to use it or any other rom then official because it has many korean apps running which are quit annoying please help me if some one know..
Click to expand...
Click to collapse
OK. Basically you'll have to root it, flash a custom recovery like CWM and go to CM's site and pull a pre-built ROM for your device and install it via recovery. But it's likely to be a tedious process with many many details left for you to figure out yourself.
You'll most likely need Odin/Heimdall to deal with Samsung Galaxy devices. Since you are using S3, a very popular model, hopefully there are already pre-rooted images for your specific model on the Internet. Just grab one (be careful with its version!) and flash it with Odin/Heimdall. Usually flashing PDA(Odin 3.07)/AP(Odin 3.09) alone is enough. There are many tutorials on how to accomplish that with either program in the forums.
Be sure to wipe the data partition before installing CM or it may get stuck in the boot loop.

malrevenal said:
OK. Basically you'll have to root it, flash a custom recovery like CWM and go to CM's site and pull a pre-built ROM for your device and install it via recovery. But it's likely to be a tedious process with many many details left for you to figure out yourself.
You'll most likely need Odin/Heimdall to deal with Samsung Galaxy devices. Since you are using S3, a very popular model, hopefully there are already pre-rooted images for your specific model on the Internet. Just grab one (be careful with its version!) and flash it with Odin/Heimdall. Usually flashing PDA(Odin 3.07)/AP(Odin 3.09) alone is enough. There are many tutorials on how to accomplish that with either program in the forums.
Be sure to wipe the data partition before installing CM or it may get stuck in the boot loop.
Click to expand...
Click to collapse
My device is rooted..and on cynogenmod my phone is not available in the list that CM has roms.i wonder which phone rom shuld i use
i am searching on internet long time but not fined anything helpful..

sajjad30 said:
My device is rooted..and on cynogenmod my phone is not available in the list that CM has roms.i wonder which phone rom shuld i use
i am searching on internet long time but not fined anything helpful..
Click to expand...
Click to collapse
I see CM has official ROMs for the international i9300, perhaps you can give it a try

malrevenal said:
I see CM has official ROMs for the international i9300, perhaps you can give it a try
Click to expand...
Click to collapse
i tried one of them but it wont install

sajjad30 said:
i tried one of them but it wont install
Click to expand...
Click to collapse
What version is it, and how exactly it failed?

malrevenal said:
What version is it, and how exactly it failed?
Click to expand...
Click to collapse
it was 4.3 for i9300 and error was like installation aborted

[Q] Verizon LG G2 bricked after stock update - HELP

I need your guys' help big time. I've been trying to fix this for the past couple of days and can't!
My phone was running a rooted stock ROM and has PhilZ Touch 6.25.4/Clockworkmod v6.0.4.7. I have one backup.
My phone asked me if I wanted to update to KitKat, so I said sure! ...Shouldn't have done that BS. It rebooted into Clockworkmod, and I can't get it to go past Clockworkmod, no matter what I do.
I can't even get Windows to install the drivers for the phone. I have them downloaded, and it won't automatically install them no matter what I do. And when I try pointing to them, it says Windows could not find driver software for your device. I tried drivers on Verizon's website and ones posted on these forums.
Please help! I don't know what else to do.

W77 said:
I need your guys' help big time. I've been trying to fix this for the past couple of days and can't!
My phone was running a rooted stock ROM and has PhilZ Touch 6.25.4/Clockworkmod v6.0.4.7. I have one backup.
My phone asked me if I wanted to update to KitKat, so I said sure! ...Shouldn't have done that BS. It rebooted into Clockworkmod, and I can't get it to go past Clockworkmod, no matter what I do.
I can't even get Windows to install the drivers for the phone. I have them downloaded, and it won't automatically install them no matter what I do. And when I try pointing to them, it says Windows could not find driver software for your device. I tried drivers on Verizon's website and ones posted on these forums.
Please help! I don't know what else to do.
Click to expand...
Click to collapse
You should install the driver manually by double clicking it or if it's in zip file you must open it first and search the driver.
Sent from my LG p705 using XDA Dev Soft.

george brown said:
You should install the driver manually by double clicking it or if it's in zip file you must open it first and search the driver.
Sent from my LG p705 using XDA Dev Soft.
Click to expand...
Click to collapse
I did. It says it cannot find the drivers when pointing to the correct folder, even though I'm using the correct drivers.

Try it with another computer. Might be your windows having problem.
Sent from my LG p705 using XDA Dev Soft.

Can't get rid of Cyanogen recovery in sgh i777

I'm using sgh i777 running on cm 12.1, but, the pre-installed Cyanogen recovery is irritating me, I want to use can recovery, but I can't install it in that, also bootloader is not working, I installed device drivers in my pc, still it din work, pls help me, so many guys told about Odin, I don't have lots of knowledge in that one, kindly help me..

rajachandie said:
I'm using sgh i777 running on cm 12.1, but, the pre-installed Cyanogen recovery is irritating me, I want to use can recovery, but I can't install it in that, also bootloader is not working, I installed device drivers in my pc, still it din work, pls help me, so many guys told about Odin, I don't have lots of knowledge in that one, kindly help me..
Click to expand...
Click to collapse
Kindly check Google once on "how to use odin"

[Completed] Requesting unbreak for my SM-P605K rooted

Hi, smart XDA Developers,
I just installed root about 2 months ago to my tab, and installed cwm with rom manager. However, I installed the wrong version of cwm and it never booted again. I thought my tab was in hard-brick mode. I searched Google, Naver, and even Baidu for informations of mbn or hex file of my tab. I tried to install the David's rom 5.1.1, but I failed at installing the cwm. Is there anyway to fix my problem? I have the original 4.4.2 P605K rom in my computer. Sorry for my poor English, and written from my iPhone in PM 8:41, December 2nd.
P.s. I'm quite busy. If you have time, send me the solution with email ([email protected]) or comments if you want.
Thank you.

Hul_ said:
Hi, smart XDA Developers,
I just installed root about 2 months ago to my tab, and installed cwm with rom manager. However, I installed the wrong version of cwm and it never booted again. I thought my tab was in hard-brick mode. I searched Google, Naver, and even Baidu for informations of mbn or hex file of my tab. I tried to install the David's rom 5.1.1, but I failed at installing the cwm. Is there anyway to fix my problem? I have the original 4.4.2 P605K rom in my computer. Sorry for my poor English, and written from my iPhone in PM 8:41, December 2nd.
P.s. I'm quite busy. If you have time, send me the solution with email ([email protected]) or comments if you want.
Thank you.
Click to expand...
Click to collapse
Greetings and welcome to assist. If you install the original stock firmware through odin you can then re root and flash the correct recovery. Can you still get download mode and does your pc recognise your tablet ?
You can use updato here
http://forum.xda-developers.com/galaxy-s7/how-to/updato-largest-online-firmware-archive-t3413785
to obtain the correct rom for your tab
Good Luck
Sawdoctor

THAnks for your support, but my tab can't get in to download mode or anything. My computer recognizes my tab as QHSUSB_BULK , and I can't see anything but the black screen when I press the power button.

Hul_ said:
THAnks for your support, but my tab can't get in to download mode or anything. My computer recognizes my tab as QHSUSB_BULK , and I can't see anything but the black screen when I press the power button.
Click to expand...
Click to collapse
If your pc recognises the phone that is something but not being able to get into download mode is worrying. There are only 3 things I can suggest
Mskips toolkit here
http://forum.xda-developers.com/gal...olkit-unified-android-toolkit-galaxy-t2998214
or if you still have root then you maybe able to flash twrp through flashify from thr playstore or you can try flashing stock rom for your device through mobile odin
If none of these work then try asking your question here
http://forum.xda-developers.com/galaxy-note-10-2014/help
and hopefully the experts can help
Good Luck
Sawdoctor

sawdoctor said:
If your pc recognises the phone that is something but not being able to get into download mode is worrying. There are only 3 things I can suggest
Mskips toolkit here
http://forum.xda-developers.com/gal...olkit-unified-android-toolkit-galaxy-t2998214
or if you still have root then you maybe able to flash twrp through flashify from thr playstore or you can try flashing stock rom for your device through mobile odin
If none of these work then try asking your question here
http://forum.xda-developers.com/galaxy-note-10-2014/help
and hopefully the experts can help
Good Luck
Sawdoctor
Click to expand...
Click to collapse
Sorry! SkipSoft Toolkit didn't worked with my tab. I just gave up and gonna buy a new motherboard

[Galaxy J1 SM-J100mu] root / supersu / twrp / signature problem

Allright. I've spent hours and hours reading about this and I'm afraid I didn't manage to find anything useful.
I own this model of samsung galaxy which isn't listed at all in any device list of twrp nor any custom-anything. So what I most managed to do was entering into stock recovery mode and try to install Supersu from the sdcard. Which lead to the failed-signature problem.
So here's my question; Is there any way of disable signature request in stock recovery mode? or maybe sign the apk so it handles it properly? The best solution would be to get a compatible version of twrp but I don't know..it doesn't seem to exist. I already tried some other J1 SM-Jxxx versions but they don't work. It just get stuck in samsung logo and no recovery mode loads ever.
Thank you very much for reading, I hope you can help me. I'm no expert.

Or I could try to find the most similar device to mine, so I can look for a TRWP prepared for that device and see if it also works in mine, hopefully. Any ideas?

Asu

What is your galaxy model actually? Maybe there will be more help coming if we know your device model

G6