Allright. I've spent hours and hours reading about this and I'm afraid I didn't manage to find anything useful.
I own this model of samsung galaxy which isn't listed at all in any device list of twrp nor any custom-anything. So what I most managed to do was entering into stock recovery mode and try to install Supersu from the sdcard. Which lead to the failed-signature problem.
So here's my question; Is there any way of disable signature request in stock recovery mode? or maybe sign the apk so it handles it properly? The best solution would be to get a compatible version of twrp but I don't know..it doesn't seem to exist. I already tried some other J1 SM-Jxxx versions but they don't work. It just get stuck in samsung logo and no recovery mode loads ever.
Thank you very much for reading, I hope you can help me. I'm no expert.
Or I could try to find the most similar device to mine, so I can look for a TRWP prepared for that device and see if it also works in mine, hopefully. Any ideas?
Asu
What is your galaxy model actually? Maybe there will be more help coming if we know your device model
G6
Related
Guys,
I am using Galaxy mini GT-S770. I wanted to root my phone and to flash a custom rom. I was able to root my phone and. I can't Install Cwm. I tried both the methods By zip and odin. While going to cwm screen its shows E;/Mount error. also many features of cwm does not work. when i look for soloutions i found out that to use custom rom. so how can we install a custom rom without cwm. or how to fix the error. Thank you
- Mathew Joy
Hi,
I can't find any Samsung with model number s770. Are you sure about that model? If your device is a clone and not an actual Samsung device.... Using files made for a Samsung will likely destroy your device.
If it is a Galaxy mini, and you've made a mistake on the model number, here is where to ask for help,
http://forum.xda-developers.com/galaxy-mini/help
Again, don't ask there if it's a clone. You won't find help there, or any files of any kind that will work on your device.
Good luck!
Hi all, I've been scouring XDA and the web but can't find the relevant info I need for this. Basically I acquired this 10.1" tab recently and was able to root it via towelroot, I see there are lots of custom roms I'd like to flash on it, but I cannot get Odin/download mode to flash a custom recovery, I must be missing some step somewhere. The error I get in download mode is "SECURE CHECK FAIL : RECOVERY" I downloaded all the latest version and even older versions pf TWRP/CWM and Philz Touch, and all same result. It's on the latest verizon update 4.1.2. I'd really like to get a new rom on this.
Any help is appreciated! Thanks!
Bump. I have one as well and in 6+ months of searching I have found nothing.
Is there a recovery for other models that would work?
Sent from my VS980 4G using XDA Free mobile app
Recoveries are firmware specific and "network" tabs are not popular or common with devs and that's why you can't find anything (roms, recovery or mods) for network (Att, sprint, Verizon).
Wifi tab roms or recovery won't work on network tabs, you end up with a non working or bricked tablet.
Pp.
Try this it worked in seconds.
http://www.cydiaimpactor.com/
This will get you root but I have not found a rom or recovery yet. I did post on this http://forum.xda-developers.com/gal...ys-want-ill-build-t3128204/page3#post62592129
to see if the guy would build one. maybe if more of us ask he might entertain it. Hope this helps.
GUYS!!! SOMEONE HELP ME PLEASE!!!! Okay i have a Galaxy S6 version 5.0.2 running AT&T G920AUC1AOE2. i had it rooted with ping pong root and everything was working alright. so i noticed i didnt have a custom recovery and i needed one to install other root items. I decided to try TWRP and followed the instructions from Techno buzz... just google s6 custom recovery and its the first one! and everything seemed to go fine until i tried to rebooted to get into my TWRP. and when i did all i got was a reboot and the normal start up screen that says Custom Binary Blocked by Reactivation Lock on the top left hand corner in red letters!! it doesnt go past here!!! ive had some experience with rooting and things like that but this time i dont know!!! i tried downloading the Stock Rom from an XDA forum but it was the OCE version... not the one im on which is OE2. so when i tried to install it would get stuck on NAND WRITE START!!! on odin!! i also didnt have USB Debugging on but i dont think thats the problem. the drivers are properly installed...i found a stock rom that is OE2 and i will try with that..PLEASE if anyone can help me i would really love your help!!! also please try to contact me at [email protected] PLEASE THIS IS MY LAST HOPE!!!!
Update
Okay so odin isnt gonna work.. so i found out i had a galaxy s2 lying around that wasnt running smoothly and i was trying to use odin to maybe flash a stock onto it. but i remember i had kies. so i went there and went to the firmware install. asked for the model number and it worked, asked for the serial number and it worked, then it downloaded and everything worked. so then with my s6 it isnt supported so i tried smart switch. i went to firmware install. model number was good, but when i type the serial number the whole program closes and i cant do anything. i would try to use odin to mess my phone up and try A emergency recovery but i cant even write with odin. im getting close so any ideas??
Hi there,
You'd be best served asking for help from the experts who own your device here:
AT&T Galaxy S6 Q&A, Help & Troubleshooting
Good luck
I don't really know why my phone is stuck in a bootloop to begin with. I've tried EVERYTHING I could possibly think of!
Here's What I've tried :
WipeData/Factory Reset and I also wiped Cache.
I tried to use ODIN to flash the original stock ROM to the device but the bootloader is locked so its impossible to flash any ROM to the devices (Even if it's official).
I tried to apply the Lollipop 5.0 update in recovery using a external SD card.
I tried using ADB sideload.
(Bonus points if you can give me away to unlock the bootloader! because i'll know what to do if it's unlocked.)
So...If anyone has suggestions, I'll happily take any!
Also Please! Leave links so I have quick access!
Hi,
I can't find a relevant thread on your device and issue, but you can ask for help here,
http://forum.xda-developers.com/android/help
Good luck!
Hi,
The story is this. I installed cyanogen mod 12.1 with TWRP 2.8.1.0 in my Galaxy S Plus i9001. Then got the code to unlock the phone but cyanogenmod doesnt support the unlocking process so I have to use another ROM. I have searched for an official 2.3.6 for my phone and got it, its a tar.md5. After searching, it seems that has to be installed with odin and in download mode, though I would really want to install it with TWRP, or any other easy method... I think tar.md5 are supported in a newer version. Is possible in any way to update to 3.0.0? I got this TWRP from the cyanogenmod thread, its specifically for the i9001.
Rebooted in download mode, connect it to pc and it says that it isnt recognized, of course, no drivers. THEN i click on the device and click update driver and point it to the folder where samsung drivers for mobile phones are, I tried both, the official and the version 1.5.55.0 from this forum, it wont use any, it says that drivers dont match. I also tried the ADB installer, because i dont know what im doing or what its the difference, but it wont detect anything.
So... Could you help me, please?
Thanks you
XDA Visitor said:
Hi,
The story is this. I installed cyanogen mod 12.1 with TWRP 2.8.1.0 in my Galaxy S Plus i9001. Then got the code to unlock the phone but cyanogenmod doesnt support the unlocking process so I have to use another ROM. I have searched for an official 2.3.6 for my phone and got it, its a tar.md5. After searching, it seems that has to be installed with odin and in download mode, though I would really want to install it with TWRP, or any other easy method... I think tar.md5 are supported in a newer version. Is possible in any way to update to 3.0.0? I got this TWRP from the cyanogenmod thread, its specifically for the i9001.
Rebooted in download mode, connect it to pc and it says that it isnt recognized, of course, no drivers. THEN i click on the device and click update driver and point it to the folder where samsung drivers for mobile phones are, I tried both, the official and the version 1.5.55.0 from this forum, it wont use any, it says that drivers dont match. I also tried the ADB installer, because i dont know what im doing or what its the difference, but it wont detect anything.
So... Could you help me, please?
Thanks you
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
Please create an account so you can post within the forums where your device is supported:
Samsung Galaxy S
Your questions will go here:
Samsung Galaxy S Plus Q&A
Good luck and welcome to XDA!