Database Info

[HOW-TO]Restore latest original LGP920 rom

Required:
Install B2CAppSetup.exe, LG PC Suite IV and related driver.
1. Run LGMobile update
2. Plug your optimus 3d (debug mode on) and wait for the connection
3a. If there is a new version, click on Start upgrading software for lg phone
3b. If you allready have latest version, click on User/Support then emergency mode, insert your IMEI and click on check
4. Wait for download and upgrading (15/20 min)
PS. you will loose root, but you will not loose data, data.img is untouched
PS2. if you got some problems, try again. I've tried few time before have a successfully flash.

Thanks Fabio!!

Trying it now
Lets hope it works
It Worked
I was on the right path before, but i took 3 tries to get it updated!
Thanks!

Renegade_Rulez said:
Trying it now
Lets hope it works
It Worked
I was on the right path before, but i took 3 tries to get it updated!
Thanks!
Click to expand...
Click to collapse
What do you mean by 3 tries? What error message were you getting, if any?

shollywood said:
What do you mean by 3 tries? What error message were you getting, if any?
Click to expand...
Click to collapse
It just stopped at 50% and the third time it worked.

Thanks....

I keep getting phone does not support S/W update message
Sent from my SCH-I510 using XDA App

I'm having the same problem as the person above me.. i tried so many times.. i still get the same message "software not supported for this model.."
Please help..

Im in the US , have a developer model on May software. I changed the country to UK and was able to install drivers. I installed Pc Suite. But still getting that error message stating my phone model don't support s/w update
Sent from my SCH-I510 using XDA App

largo79 said:
Im in the US , have a developer model on May software. I changed the country to UK and was able to install drivers. I installed Pc Suite. But still getting that error message stating my phone model don't support s/w update
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
Is it possible your model is 925 and not 920?

We need CWM so we can make a backup before trying to mess around in the system
It seems my recovery partition was messed up so again install original rom...

Renegade_Rulez said:
We need CWM so we can make a backup before trying to mess around in the system
It seems my recovery partition was messed up so again install original rom...
Click to expand...
Click to collapse
ROM Manager should start supporting the p920 later today.

erezak said:
Is it possible your model is 925 and not 920?
Click to expand...
Click to collapse
No its a 920 as I'm getting the same. So your updater always defaults to USA when you open it up correct?

aremcee said:
ROM Manager should start supporting the p920 later today.
Click to expand...
Click to collapse
wow thanks
The famous CM developer aremcee, nice to see you here as well.
Really loving your work on the LG O2x!
Looking forward to use CM7 on my O3D as well if someone decides to pick up the challenge (hint hint )

Renegade_Rulez said:
wow thanks
The famous CM developer aremcee, nice to see you here as well.
Really loving your work on the LG O2x!
Looking forward to use CM7 on my O3D as well if someone decides to pick up the challenge (hint hint )
Click to expand...
Click to collapse
It'll be a while before that. We had zero support for OMAP4 in CM, and merging it in will have to be done carefully to avoid breaking everything else. The only thing I merged in already was the bootimage-building stuff, in order to get CWM out there.

aremcee said:
It'll be a while before that. We had zero support for OMAP4 in CM, and merging it in will have to be done carefully to avoid breaking everything else. The only thing I merged in already was the bootimage-building stuff, in order to get CWM out there.
Click to expand...
Click to collapse
No hurry for that, whenever you are ready we will see it
Thanks a lot for your hard work!

aremcee said:
ROM Manager should start supporting the p920 later today.
Click to expand...
Click to collapse
Done. You can now flash CWM from ROM Manager (and reboot into recovery, and backup, and all the neat stuff RM does) on the O3D.

aremcee said:
Done. You can now flash CWM from ROM Manager (and reboot into recovery, and backup, and all the neat stuff RM does) on the O3D.
Click to expand...
Click to collapse
Did my first backup feels good to be safe again!

Can I move the backup to external sd?
Sent from my LG-P920 using Tapatalk

Where can i find the CWM for this phone?
My phone model is LGP929 -- and its running the 08 software

[A510] CM10 UNOFFICIAL for A510 - need testers

Hi,
i'll create a more detailed thread once it's running, but my tab is at acer servicing (they did not fix it last time, forgot about the gps not working)..
I need some testers to flash this with Nothrills CWN.
It's a CM10 build based on pawtip work, and adapted to A510.
I'll not blabla you about the risk of bricking, exploding and destroying earth. you do that only if you know what you are doing
DO FULL WIPE BEFORE INSTALL
Built on 17 sep
http://goo.im/devs/BENETNATH/cm10-unofficial-A510/cm-10-20120917bis-UNOFFICIAL-a510.zip
http://www.multiupload.nl/CXT0SHU62F
new build, many tweaks, i'm waiting your feedbacks (please test ntfs (with and w/o paragon software, cifs, usb, rw system, face unlock, video recording..)
seems working almost well ! still needs feedback on cifs, usb and sdcard-ext
For gapps
http://wiki.cyanogenmod.com/wiki/Latest_Version/Google_Apps
Pictures (thanks screen2)
Videos of Build 20120914 (thanks SebiPwned)
http://www.youtube.com/watch?v=IsH4Ac4LMfQ
http://www.youtube.com/watch?v=CqB-Gp3EvZ0
thanks for your feedbacks
thanks to Nothrills and pawtip for their respective huge work
ARCHIVE (old builds available http://goo.im/devs/BENETNATH/cm10-unofficial-A510/):
Built on 14 sep :
http://www.multiup.org/fichiers/dow...d404c2bb1b_cm_10_20120914_UNOFFICIAL_a510.zip
https://rapidshare.com/#!download|355p5|3348101529|cm_10_20120914_UNOFFICIAL_a510.zip|160115|0|0
http://uptobox.com/i2ygrz5wcnn8
trouble of system permissions, bugs reported, thanks
Built of 19 sept
http://goo.im/devs/BENETNATH/cm10-unofficial-A510/
NOT BOOTING
Built on 13 sep :
https://dl.dropbox.com/u/91092/cm-10-20120913-UNOFFICIAL-a510.zip
seems working, except USB
Built on 12 sep 2012 :
NON WORKING

I'll give a go tonite'

Well, the "not boot" part seems to capture the experience for me pretty accurately .
Am stuck at the Acer logo.

I can confirm that mine does not boot either. Glad to see that cm10 is on the way and will be happy to try again with new build.
Sent from my GT-I9300 using Tapatalk 2

Started updating system in cwm and went to complete in a short period of time. Seems to be an early fail in the system upgrade. Wish I had more input but, seems to be an extremely quick process I'll time it, if it will help your prognosis? Please give me another shot!

Thx for all your hard work!
Here is the feedback from my friend:
Cannot boot to android, just hang there. n there is an error when doing the cwm restore.

ok, so just to understand it well, does the rom install without any trouble in CWN ? it's not clear to me if it works in your comments
then, if it's early fail, i've to work on kernel config and boot.img.
can you give a try to put another boot.img, it should not do the trick but .. let's say either the a510's original, the pawtip's a700 or the frankenrom 's one.
it's really not a comfortable situation as i'd like to test it and try to have something running, but without tab, you're my alpha-testers :/

Will try tonight...
Sent from my MB525 using xda app-developers app

just in addition,
can you check if adb can connect (let a adb wait-for-device or adb logcat runnning on cold boot)

BENETNATH said:
ok, so just to understand it well, does the rom install without any trouble in CWN ? it's not clear to me if it works in your comments
then, if it's early fail, i've to work on kernel config and boot.img.
can you give a try to put another boot.img, it should not do the trick but .. let's say either the a510's original, the pawtip's a700 or the frankenrom 's one.
it's really not a comfortable situation as i'd like to test it and try to have something running, but without tab, you're my alpha-testers :/
Click to expand...
Click to collapse
For me it installed without any problem. I don't remember seeing any warning or error msg as reported by jokerzlh.
Sent from my GT-N7000 using xda app-developers app

Randomwalker said:
For me it installed without any problem. I don't remember seeing any warning or error msg as reported by jokerzlh.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
As far as I can recall it was the same for me. My impression was that the install was very quick but I didn't really look for an error message or such. I might try again tonight. I did have a problem restoring my backup to get up and running again, this took three tries.
Sent from my GT-I9300 using Tapatalk 2

i don't remember if nothrills cwn offers a log features or not ?

Randomwalker said:
For me it installed without any problem. I don't remember seeing any warning or error msg as reported by jokerzlh.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
so can u succeed in booting? Installation was okay but it couldn't boot for my friend.

CWM did not error for me, I'm positive. Just quick system update and hung on boot. I'll get a log tonite and post it up if no one beats me to it.

Thanks a lot for all your effort, i'll try to keep it alive
even if a job + a wife +3 childs might catch a bit of my spare time..
EDIT : ok, i'm a bit dumb, found some ramdisk typos..
EDIT 2 : compiling again..

jokerzlh said:
so can u succeed in booting? Installation was okay but it couldn't boot for my friend.
Click to expand...
Click to collapse
No, it stuck on boot. I must have misunderstood you, I thought you(r friend) had an error msg in CWM.

I've been working on CM10 as well, but it's been a pain in the *$$
Are you using a pre built kernel or are you compiling source?

i'm compiling it
but i'd some difficulties to find what tricks might apply when compiling kernel for JB, as opposite to ICS.. did not find the difference tht might apply.
the only thing was that some jar frameworks might have to be listed twice, for CM10
i'll dig that once something boot

check out OP, new build online
feedbacks welcome

If you're coming off a different rom, make sure you're doing your full wipes before installing. You gotta clean the old data off first.
MD

[rom]cm10_unofficial_pre-alpha_test

Update 12/31/2012 CM10.1
Thanks to Exxodium for swapping devices with me. I got the Photon-Q yesterday and have had a little time to work with it. Last night I built an insecure kernel so I could have adb as root. Moments ago, after losing all my junk and all the stuff that has happened in the last month, I built CM10 with inline kernel. Skip to the good stuff. I was able to get a partial boot; enough to get a logcat and last_kmsg to do some debugging. I will not be posting any links until I have a fully booting device, and even then not before I have some private testing done. Stay tuned. Cheers and out!

The link to the flashable.zip doesnt seem to be working
edit it works just have to remove the second http: from the link there
Sent from my XT897 using Tapatalk 2

That's what I assumed but I'll still fix it as soon as I get home. Thanks.
Sent from my Galaxy Nexus using xda app-developers app

Definitely going to try this after I recharge.
Edit: tried the flashable. It failed in twrp. Maybe the download wasn't complete?
Edit part 2: re-downloading.. Gonna try again.
Edit part 3: re download did not work. Still failed. Anyone else?
Edit part 4: tried fastboot
C:\Program Files\Android\android-sdk\tools>moto-fastboot flash system cm10_photo
n_q_pre-alph.asystem.img
sending 'system' (187108 KB)... OKAY [ 87.646s]
writing 'system'... INFOUnknown chunk type
FAILED (remote failure)
C:\Program Files\Android\android-sdk\tools>
Sent from my XT897 using xda premium

tetrabyt said:
Definitely going to try this after I recharge.
Edit: tried the flashable. It failed in twrp. Maybe the download wasn't complete?
Edit part 2: re-downloading.. Gonna try again.
Edit part 3: re download did not work. Still failed. Anyone else?
Sent from my XT897 using xda premium
Click to expand...
Click to collapse
Mine failed in TWRP too...good thing I made a backup...lol

zrmxp95 said:
Mine failed in TWRP too...good thing I made a backup...lol
Click to expand...
Click to collapse
It would help if you gave me a little more information, like error codes, when you post reports.

why does everyone keep thanking me? i play halo and borderlands 2 and yell at kids on my lawn. i do nothing else!

shabbypenguin said:
why does everyone keep thanking me? i play halo and borderlands 2 and yell at kids on my lawn. i do nothing else!
Click to expand...
Click to collapse
Hey now, who started the asanti device tree? Dats right. Who compiled the first kernel from source? Dats right. Who made a flashable zip just so I could kang it for my kernel!??!
I rest my case.

interloper said:
It would help if you gave me a little more information, like error codes, when you post reports.
Click to expand...
Click to collapse
From what I remember I just said error....no codes......I can try it again later today and see after I run errands around town

interloper said:
It would help if you gave me a little more information, like error codes, when you post reports.
Click to expand...
Click to collapse
didnt give a error on install just aborted but did notice when you just try and extract the file it gives error saying file is already there like 5 times
in folder
system\etc\terminfo\

Alright lads, head on to the new link and give it some welly! I rebuilt the system with changes to the vendor side, fixed the install script and a few other jelly rolls. Let me know what happens.

Using this link :
Gives format() expects 5 arguments, got 4.
E:Error in /sdcard/cm-10-(etc etc) (Status 7).

UPDATE
Ok, I fixed a few things so the ROM should flash properly. Remember to wipe properly or you'll get a rash. Cheers!

Didn't work for me
I tried flashing it this morning and all I got was some looping flickers, Never even a moto logo... So not sure.

I've done a couple builds that have not been posted in this thread, for private testing. I am doing my best, but without testers committed to helping me fix this, it won't be me who puts out CM10. I'm working with arrrghh and lmartin but they are only on a limited amount of time. No one is giving me logs, kmsg, dmesg etc, and if that doesn't happen, all I can do is guess. If you are interested in testing, I am committed to getting CM10 out for this device.

interloper said:
I've done a couple builds that have not been posted in this thread, for private testing. I am doing my best, but without testers committed to helping me fix this, it won't be me who puts out CM10. I'm working with arrrghh and lmartin but they are only on a limited amount of time. No one is giving me logs, kmsg, dmesg etc, and if that doesn't happen, all I can do is guess. If you are interested in testing, I am committed to getting CM10 out for this device.
Click to expand...
Click to collapse
IIRC, I couldn't get adb up on your build... So I was unable to pull logs.
I did provide you a last_kmsg, but that's about all I could do without adb.
I kinda wish I knew more about how to fit the pieces of CM together better, as I think CM9 would be done if I did

Updated OP. I think it's still gonna boot loop, and if so please try adb. If adb works please try and get a logcat or dmesg. If you need help getting adb setup, need to know the commands to use adb, or have any other questions, please chat with me on IRC. Good luck.

interloper said:
Updated OP. I think it's still gonna boot loop, and if so please try adb. If adb works please try and get a logcat or dmesg. If you need help getting adb setup, need to know the commands to use adb, or have any other questions, please chat with me on IRC. Good luck.
Click to expand...
Click to collapse
I didn't have any luck getting adb to recognize the 10-08 build. Installed and booted past boot logo, then looped between black screen & screen off.

fallnSaint said:
I didn't have any luck getting adb to recognize the 10-08 build. Installed and booted past boot logo, then looped between black screen & screen off.
Click to expand...
Click to collapse
Thank you. Check back tonight for a new build, if you would.
Does it boot into recovery? Would you mind testing some kernels on IRC later tonight?

Updated the OP with a new attempt. Following newer CM "lets have everything in common that's common" there is a bit more merging in the code base. While this means nothing to the end user in general it means that IF this get working properly it will more likely get to be official. That is significant. Official means more people get to enjoy it served up from a nice list of perfectly good links from an organized website. As an end user myself, that excites me. So, here's to hoping the stupid thing boots because as humiliating as this is, I think quitting now would be even worse.
1. Make a backup
2. Flash the zip in recovery.
3. WIN or LOSE!
4. Let me know what happened with as much detail as possible.
5. I'm going to get some sleep now maybe.

Recovery Testing SM-T330NU CLOSED

OKay, so
the thread for our working Philz/Advanced CWM recovery for the sm-t330nu is located here;
http://forum.xda-developers.com/tab-4/development/recovery-philz-smnu-t2980094
more work to do but will need to wait till i have the device.
-------------------------------------
NOTE- @gr8nole has opened TWRP recovery thread in development
http://forum.xda-developers.com/tab-4/development/twrp-2-8-2-0-unofficial-t330-t2980716
--------------------------------------
This thread will be closed as it has served it's purpose. Thanks everyone ! =)

I'm a wus and don't want to test but thank you for helping move this device forward. Looking forward to some good news here.

xnatex21 said:
I'm a wus and don't want to test but thank you for helping move this device forward. Looking forward to some good news here.
Click to expand...
Click to collapse
x,
hi,
no worries, i completely understand. as it happens i may be recieving an sm-t330nu by way of donation sometime soon
specifically for the purpose of developing. This call is meant for those with experience. I will say i am working towards
putting together device trees for sm-t33x in general just in case.
be good
m

I considered looking into a recovery build for this device. But, based on the lack of responses to this thread, I don't see enough interest to make it a worthwhile endeavor. I see several threads asking for a recovery, but no responses when someone builds a test???

gr8nole said:
I considered looking into a recovery build for this device. But, based on the lack of responses to this thread, I don't see enough interest to make it a worthwhile endeavor. I see several threads asking for a recovery, but no responses when someone builds a test???
Click to expand...
Click to collapse
I got this device just yesterday, Big improvement from the T210R for sure. Of course we all want a recovery but don't want to risk our tabs

gr8nole said:
I considered looking into a recovery build for this device. But, based on the lack of responses to this thread, I don't see enough interest to make it a worthwhile endeavor. I see several threads asking for a recovery, but no responses when someone builds a test???
Click to expand...
Click to collapse
Yeah, it's a little meh. But mainly i'm working on getting my tree for this tab sorted
while i wait for it to arrive. Maybe the OP is a little harsh. ... meh.
:silly:
m

Rusell said:
I got this device just yesterday, Big improvement from the T210R for sure. Of course we all want a recovery but don't want to risk our tabs
Click to expand...
Click to collapse
No risk, no reward.

moonbutt74 said:
No risk, no reward.
Click to expand...
Click to collapse
Especially since it is a new device...
What could go wrong?? What is the worst thing that could happen??

Flashing a bad recovery is not really even a risk. I probably flashed 50 bad recoveries when trying to get the T210 recoveries working. As long as you have stock recovery image to re-flash (Odin) there really isn't any risk.

gr8nole said:
Flashing a bad recovery is not really even a risk. I probably flashed 50 bad recoveries when trying to get the T210 recoveries working. As long as you have stock recovery image to re-flash (Odin) there really isn't any risk.
Click to expand...
Click to collapse
Does the Firmware from sammobile .com for SM-T330NU contain stock recovery?

Rusell said:
Does the Firmware from sammobile .com for SM-T330NU contain stock recovery?
Click to expand...
Click to collapse
It should, but MB has it posted in the OP also. :good:

Rusell said:
Does the Firmware from sammobile .com for SM-T330NU contain stock recovery?
Click to expand...
Click to collapse
The stock recovery is linked to in OP
Rusell,
I mean this in the best way,
You may not meet the requirements I set out in OP
for a tester. Which is nothing bad. If you're willing to wait, I should be receiving my tab
this coming week, at which time I won't need a tester . My effort is geared toward getting
things moving.
m

Well i flashed and it just keeps rebooting over and over trying to get into recovery, Here is what is read at the top left corner every time:
RECOVERY BOOTING....
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit : recovery
It wont let me go further then just seeing the "Samsung galaxy Tab 4" splash screen.

Rusell said:
Well i flashed and it just keeps rebooting over and over trying to get into recovery, Here is what is read at the top left corner every time:
RECOVERY BOOTING....
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit : recovery
It wont let me go further then just seeing the "Samsung galaxy Tab 4" splash screen.
Click to expand...
Click to collapse
Okay, connect via adb and see if you can get logcat,
the hang means the kernel is good, but the fstab may be wrong, or i need to patch init and adb.
thanks,
m

moonbutt74 said:
Okay, connect via adb and see if you can get logcat,
the hang means the kernel is good, but the fstab may be wrong, or i need to patch init and adb.
thanks,
m
Click to expand...
Click to collapse
give me ambitmto get to my comp, if you're willing to run another test pm me please.

moonbutt74 said:
give me ambitmto get to my comp, if you're willing to run another test pm me please.
Click to expand...
Click to collapse
So how do i take logcat from adb and when should i do it,While flashing or while booting?
Excuse me since im a newb

Rusell said:
So how do i take logcat from adb and when should i do it,While flashing or while booting?
Excuse me since im a newb
Click to expand...
Click to collapse
Oops , okay skip that, okay this test is a fail you can refurn to stock and delete the custom,
i will mark test 1 as fail and take it down.
m

Rusell,
okay, round 2 if you're up for it,
ROUND 2 http://d-h.st/8U5f -modified default.prop,fstab temp test with prebuilt kernel and dt.img
the kernel should be msm8226, if this fails i will revisit my config and run a new build,
m

and if you are really feeling frisky, give this TWRP a try.
http://d-h.st/Qm3

gr8nole said:
and if you are really feeling frisky, give this TWRP a try.
http://d-h.st/Qm3
Click to expand...
Click to collapse
hey, if you're jumping in cool, how do i add you as contributor ?
m

CM 13 for hiaeWHL

i can barely figure anything out about this model, i already soft bricked it wiping everything and then trying to install the wrong cm13. got it unbricked with a ruu but still cant find much on this model. there gonna be a cm for this model, or a work around? maybe any kind of rom thats not stock and just rooted. coming from a m9 and very disappointed on the phones hardware and now theres no cool roms to play with D:

I agree....its disappointing to say the least with how little support there is on this model. I thought with this one being the new flagship supposedly that it wouldnt be like this. Sadly, the little help from the few awesome devs on this are spent and have given up or will if no extra help is provided. It is a lot of work and if i was more experienced with more time to devote, i would be happy to assist them. Before, I used to do all this due to the lacking abilities of my prior handsets for what i wanted to do. Bright side is this one doesn't have any for me this time so i am happy with root capabilties, xposed, viper4android and twrp at least. Who knows....maybe this will be a late bloomer and more support comes around....keep my fingers crossed.
There is CM13 in dev for the euro versions and maybe unlocked version but it'll be a while before it makes its way to WHL

even with gsm there isn't really any devs or support. ill be taking mine back this week to at&t and getting a nexus 5x.

im uploading a modified nightly that should work on the HIAEWHL and any other variant im going to edit this post when its uploaded
it will install SuperSu and BusyBox during flashing so it will work as you expect it!
Edit: Please report if it is working on HIAEWHL
https://www.androidfilehost.com/?fid=24415232478676985

incaner said:
im uploading a modified nightly that should work on the HIAEWHL and any other variant im going to edit this post when its uploaded
it will install SuperSu and BusyBox during flashing so it will work as you expect it!
Edit: Please report if it is working on HIAEWHL
https://www.androidfilehost.com/?fid=24415232478676985
Click to expand...
Click to collapse
Boot bug that is present on UL versions is still there with WHL. After about 5 minutes, it seems to be hanging at the CM13 bootlogo. I gave it about another 5 minutes, now I'm just going to restore my backup.

AnierinB said:
Boot bug that is present on UL versions is still there with WHL. After about 5 minutes, it seems to be hanging at the CM13 bootlogo. I gave it about another 5 minutes, now I'm just going to restore my backup.
Click to expand...
Click to collapse
incaner said:
im uploading a modified nightly that should work on the HIAEWHL and any other variant im going to edit this post when its uploaded
it will install SuperSu and BusyBox during flashing so it will work as you expect it!
Edit: Please report if it is working on HIAEWHL
https://www.androidfilehost.com/?fid=24415232478676985
Click to expand...
Click to collapse
You're awesome man....wasn't expecting anything for a few more months nightly or otherwise. I'll give it a try as well

mcbright80 said:
You're awesome man....wasn't expecting anything for a few more months nightly or otherwise. I'll give it a try as well
Click to expand...
Click to collapse
No dice! Boot loop with white HTC logo and red writing underneath

mcbright80 said:
No dice! Boot loop with white HTC logo and red writing underneath
Click to expand...
Click to collapse
any errors during flashing?

I'm able to boot all the way into CM13 with no issue. I'm S-OFF, not sure if that makes a difference.

incaner said:
any errors during flashing?
Click to expand...
Click to collapse
Hi again, sorry for such a late response back. There were no errors during flashing at all and I am S-OFF, rooted etc. Wiped data, system, cache, boot three or more times and three or more time factory reset as well, the usual u know?

mcbright80 said:
No dice! Boot loop with white HTC logo and red writing underneath
Click to expand...
Click to collapse
You have to let it boot loop. It will eventually boot in.

kozimor said:
I'm able to boot all the way into CM13 with no issue. I'm S-OFF, not sure if that makes a difference.
Click to expand...
Click to collapse
Are u on HIAEWHL?
Gesendet von meinem HTC One A9 mit Tapatalk

incaner said:
Are u on HIAEWHL?
Gesendet von meinem HTC One A9 mit Tapatalk
Click to expand...
Click to collapse
Yes, I am using hiae_whl. I saw an error message about being unable to unmount /carrier, but that's it. It didn't impact the boot. I've never had an issue with a bootloop either. I don't know if it makes a difference, but I'm not using a Sprint SIM. I'm either booting without a sim or with a T-Mobile sim.

Tikerz said:
You have to let it boot loop. It will eventually boot in.
Click to expand...
Click to collapse
incaner said:
any errors during flashing?
Click to expand...
Click to collapse
kozimor said:
Yes, I am using hiae_whl. I saw an error message about being unable to unmount /carrier, but that's it. It didn't impact the boot. I've never had an issue with a bootloop either. I don't know if it makes a difference, but I'm not using a Sprint SIM. I'm either booting without a sim or with a T-Mobile sim.
Click to expand...
Click to collapse
You are right, it will bootloop like 6 or so times i think then will go to the CM boot logo and bootloop then forever. I let it sit for hrs so i am fairly sure this time lol.