Database Info

Custom Roms and Kernels for Galaxy S4 E300S/K/L

Flash it with your own risk... Read thoroughly. These are all Korean websites. I only provide link to the specific page. Not Download link or any Instructions.. apply your own knowledge
I will only provide links for some custom kernels and Roms For E300S/K/L which i have gathered from different Korean Websites. You need to log in to get the download links. Since i am not Korean i cannot do that for you. Hope someone here can help.
Kernels:
1. [GalaxyS4] [Kernel] [SKT / KT / LGU +] Immortal Kernel official 0927
Link: http://www.matcl.com/?m=bbs&bid=imbeded&uid=198243
Flash the tar file via odin.
Roms
For E300L only
[Exclusive] Korean version of the entire network through the brush S4 E300L ROM version Teamleader_V1.0b1 streamline our release! By Leader
Link:http://koxda.com/forum.php?mod=view...ra=page=1&filter=typeid&typeid=264&typeid=264
Advanced stock rom for E300L. (based on MG2 firmware)
download link- http://pan.baidu.com/share/link?shareid=2634014583&uk=2936308387
changelog and rom page:- http://koxda.com/forum.php?mod=viewthread&tid=147560
New official update for E300L. MH1 firmware
download link: http://pan.baidu.com/share/link?shareid=3439609242&uk=2936308387
For E300S/K
[ROM] [] Korean version of the whole network exclusive S4 E300S / K through brush version Teamleader_V1.0b1 streamline optimized ROM released! By Leader
Link: http://koxda.com/thread-125256-1-1.html
Advanced Stock Rom for E300K only. (based on MG2)
MG2 Beautify v8
link to rom page- http://koxda.com/forum.php?mod=view...ra=page=1&filter=typeid&typeid=264&typeid=264
download link- http://pan.baidu.com/share/link?shareid=3844122325&uk=2150598706
Perseus kernel for E300S/K
http://www.matcl.com/?m=bbs&bid=imbeded&uid=194616
Flash, Enjoy and Report.. Help others :good:

any testers here???

flashed the immortal kernel for E300L.. so far so good

mohaimed said:
any testers here???
Click to expand...
Click to collapse
The kernel for e300k is also working well. Using ROW.. very nice addition. Have not played with voltages yet. Looking forward to getting some extra time out of the battery.
Sent from my SHV-E300K using XDA Premium HD app

I have played a little with voltage settings. Reduce mpu by 50. So far stable but no improvement in battery life. Will drain the battery and nd charge it full. Then I will test again

mohaimed said:
I have played a little with voltage settings. Reduce mpu by 50. So far stable but no improvement in battery life. Will drain the battery and nd charge it full. Then I will test again
Click to expand...
Click to collapse
My highest processor times are 250 & 600 which I've lowered by 25.
What are you using to adjust the voltages? Does it have settings for both big and little? I'm using System Tuner Pro and I have also tried setCPU. Neither have separate settings for the two clusters.
I'm going to suggest stweaks to the developer although it looks from his git commits he is using Perseus or Adam as a road map so maybe he has it on his to do list.
Sent from my SHV-E300K using XDA Premium HD app

koe1974 said:
My highest processor times are 250 & 600 which I've lowered by 25.
What are you using to adjust the voltages? Does it have settings for both big and little? I'm using System Tuner Pro and I have also tried setCPU. Neither have separate settings for the two clusters.
I'm going to suggest stweaks to the developer although it looks from his git commits he is using Perseus or Adam as a road map so maybe he has it on his to do list.
Sent from my SHV-E300K using XDA Premium HD app
Click to expand...
Click to collapse
no.. u cannot set multi core values.. its not supported by the kernel yet.. i use trickster mode to change the MPU voltages.. try it. reduce it by 50.. not more. u might face problems

Immortal Kernel for E300K (koe1974's build)
For those who own an E300K. It's my personal build. If there is something you want to see in this kernel feel free to PM me.
kernel source is DiaDust's from here
initram is based on the stock with modifications from Perseus kernel
Change Log:
immortal_koeBuild_08132013_1916
DiaDust commits as of Aug. 11
rooted
init.d support (create /etc/init.d folder and chmod your scripts)
enabled zram
testing support for 3rd party tethering apps
exfat and external sdcard support
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Sent from my SHV-E300K using XDA Premium HD app

Kernel updated.. go to the link for changelog

Can u give me the download link for rom of my e300l i cant make an account in the koxda wesite i will be very thank full to u
.

Hi
I tried koe's kernel mod and after rebooting my sim card was not recognized.
Now i use the updated imortal kernel from this thread and everything seems ok so far.
I use prerooted and deodexed mf4 for e300l from from the e300s/k/L thread.
Perhaps i did something wrong i'm pretty new to this android flashing buisnes.
I will not rest till i bricked my phone...
Sent from my SHV-E300L using xda app-developers app

mzain109 said:
Can u give me the download link for rom of my e300l i cant make an account in the koxda wesite i will be very thank full to u
.
Click to expand...
Click to collapse
the website requires to enter a korean captcha to register. i dont know korean. sorry

badpixel said:
Hi
I tried koe's kernel mod and after rebooting my sim card was not recognized.
Now i use the updated imortal kernel from this thread and everything seems ok so far.
I use prerooted and deodexed mf4 for e300l from from the e300s/k/L thread.
Perhaps i did something wrong i'm pretty new to this android flashing buisnes.
I will not rest till i bricked my phone...
Sent from my SHV-E300L using xda app-developers app
Click to expand...
Click to collapse
why dont you flash the MG2 firmware? its the latest. go to this link http://forum.xda-developers.com/showthread.php?t=2285861

I would like to test it but I don´t know how to download it from Korean webpage.

docdan1 said:
I would like to test it but I don´t know how to download it from Korean webpage.
Click to expand...
Click to collapse
sorry mate.. in that case you need a help of the Korean who cant help you with the captcha which is needed to register..

mohaimed said:
sorry mate.. in that case you need a help of the Korean who cant help you with the captcha which is needed to register..
Click to expand...
Click to collapse
After 30minutes working with google- I downloaded the ROM so maybe tomorow.

docdan1 said:
After 30minutes working with google- I downloaded the ROM so maybe tomorow.
Click to expand...
Click to collapse
great work.. upload it here. we need your reviews

koe1974 said:
For those who own an E300K. It's my personal build. If there is something you want to see in this kernel feel free to PM me.
kernel source is DiaDust's from here
initram is based on the stock with modifications from Perseus kernel
Sent from my SHV-E300K using XDA Premium HD app
Click to expand...
Click to collapse
Tried the new kernel with the tethering test. The problem that it is having is that it is not calling on IWConfig or IW to watch the WiFi and create an ad-hoc. Other than that, the kernel is great bro. To me it actually runs better than DiaDust's main version. Keep up the great work.

Someone should also start working on E300L/S variants..

I have tried KoXDA ROM on my 300S. Works good
If somebody wants to - I puted it to FF because is difficult to download it from Korean pages.
......filefactory.com/file/6awzhdy605cv/n/KoXDA.com_E300S_amp_K_V1.0b1.rar
Click to expand...
Click to collapse
Make factory reset before flash. Then flash also CWM / because after flashing is korean language in CWM/
But you will loos samsung apps- as in custom ROMs normal
Starting logo will be Samsung :good:

[ROM][DEPRECATED] OLD Cyanogenmod 11

ROM DEPRECATED, USE LAST CM11 HERE

ROM DEPRECATED, USE LAST CM11 HERE
USE ONLY LASTEST BUILD

I forgot the rom name but there's a kitkat rom with no screen flickering issue by niropa (on lollipo bootloader). u can contact with niropa to solve screen flickering issue.

Yes,was in a wrong place, i have contacted a moderator, now is in android development.

Ok , i think cm11 its the most stable tree from cm team , i like KK because its more ligth weigth , i dont know why the developers wonma make roms unstable and buggies hehe , can u add a custom features? Like another toolchain? (Linaro , Uber) or new features from kernel? Like more i/o (zen ) , gpu OC or cpu OC?...
Anyway , Thank U its run great
Enviado desde mi Moto G mediante Tapatalk

STR4NG3R-GUY said:
Ok , i think cm11 its the most stable tree from cm team , i like KK because its more ligth weigth , i dont know why the developers wonma make roms unstable and buggies hehe , can u add a custom features? Like another toolchain? (Linaro , Uber) or new features from kernel? Like more i/o (zen ) , gpu OC or cpu OC?...
Anyway , Thank U its run great
Enviado desde mi Moto G mediante Tapatalk
Click to expand...
Click to collapse
unfortunately I am only at the beginning, I'm learning slowly how to create rom from source code, for the moment I do not know to create kernels with overcloclock or similar. I'm only 15 years old, and this is the second ROM in total which I compile

SLATE21&MOTOG said:
this rom works with all bootloader, kitkat and lollipop, but with the lollipop one you will get screen flickering. If anyone knows how I can do a build with no screen flickering can contact me in pm.
Click to expand...
Click to collapse
See PACMan builds with overkill kernel by niropa. Just search in that thread and you'll find many ROMs like CarbonKK or PA, which are made to work on LP bootloader

Will this work on msim variant also? I read you mentioned xt1032 but still if you know..

It might work, but has been tested only on xt1032 aka falcon.

tested on XT1033, very stable ROM, smooth ROM ever :fingers-crossed::fingers-crossed:

Stock cm11 kernel or something else is there? I can see "overkill kernel" that reminds me really good things

Rocketval said:
Stock cm11 kernel or something else is there? I can see "overkill kernel" that reminds me really good things
Click to expand...
Click to collapse
Yes, I have used Overkill kernel that @Niropa has used in his Pac-man rom build, with the hope of fix the screen flickering, but the problem remain. This is aniway a good and stable kernel. For more information see: https://github.com/ReaperXL2/Overkill_V4_extended/tree/cm-11.0

SLATE21&MOTOG said:
Yes, I have used Overkill kernel that @Niropa has used in his Pac-man rom build, with the hope of fix the screen flickering, but the problem remain. This is aniway a good and stable kernel. For more information see: https://github.com/ReaperXL2/Overkill_V4_extended/tree/cm-11.0
Click to expand...
Click to collapse
But are kernel sources updated? Or using it cause some incompatility such as hotspot, bt or something else?

All work fine, bluetooth and hotspot work. I have tested it, the only warnings are 3:
-Do not active kernel samepage merging, you will have problem in camera
-install gapps only after the first reboot of the rom
-If you use whatsapp install it before switching to ART (in developer setting, for better performance select ART)
There aren't particular bugs

SLATE21&MOTOG said:
All work fine, bluetooth and hotspot work. I have tested it, the only warnings are 3:
-Do not active kernel samepage merging, you will have problem in camera
-install gapps only after the first reboot of the rom
-If you use whatsapp install it before switching to ART (in developer setting, for better performance select ART)
There aren't particular bugs
Click to expand...
Click to collapse
Why gapps only on second boot?

ale467 said:
Why gapps only on second boot?
Click to expand...
Click to collapse
Because if you install the rom and after the gapps and you reboot, the setup wizard crash. I have tryed it

https://www.youtube.com/watch?v=YFATFIufW7Q&feature=youtu.be
This is a small video demonstration of the rom, 60 second.

SLATE21&MOTOG said:
Yes, I have used Overkill kernel that @Niropa has used in his Pac-man rom build, with the hope of fix the screen flickering, but the problem remain. This is aniway a good and stable kernel. For more information see: https://github.com/ReaperXL2/Overkill_V4_extended/tree/cm-11.0
Click to expand...
Click to collapse
Check out xperience kernel to get rid of screen flickering

Niropa said:
Check out xperience kernel to get rid of screen flickering
Click to expand...
Click to collapse
could you give me the kernel link on github ?

SLATE21&MOTOG said:
could you give me the kernel link on github ?
Click to expand...
Click to collapse
I don't have the link I haven't built for the moto g in ages, just go to the xperience thread, their is only 1 kernel by teamex called xperience

CM11 Galaxy Tab 2 P3110 Problems

Hello everyone, I've installed CM11 here with pico gapps, The CM 11 is latest version Nightly. The rom boot and everythings works, but when I try to use some apps, for example: Aida 64,Auditor Kernel, OpenGL Extension Viewr, CPU Z, Task Manager. The Tab 2 anormaly restart, I can't open any app that, the Tab 2 always restart. Have any solution for that ? Or I will need to change for another ROM based on KitKat ?
Thanks

Only apps which require root?

Android-Andi said:
Only apps which require root?
Click to expand...
Click to collapse
No, aida 64 just show all the information of your device..... without root, CPU-Z too
Task manager from ohmi software, when I open it the device restart....
all apps show any information about android + hardware, the device restart :/
thanks for reply

Android-Andi said:
Only apps which require root?
Click to expand...
Click to collapse
Another problem I've found is When I flash blackhawk, dhollmen or any stock kernel form CM11, I get problem everytime ''OS upgrading'' when I reboot, all builds CM11.
I hope it can be fixed on future , thanks Sir for your great work here

hehk1234 said:
Another problem I've found is When I flash blackhawk, dhollmen or any stock kernel form CM11, I get problem everytime ''OS upgrading'' when I reboot, all builds CM11.
I hope it can be fixed on future , thanks Sir for your great work here
Click to expand...
Click to collapse
Custom kernel don't work fine after latest updates, to much stuff changed. Get rid of it.
About the reboot: you switched to ART?
~ All my work, news etc. on http://andi34.github.io ~

Android-Andi said:
Custom kernel don't work fine after latest updates, to much stuff changed. Get rid of it.
About the reboot: you switched to ART?
~ All my work, news etc. on http://andi34.github.io ~
Click to expand...
Click to collapse
No, I didn't switched to ART, only Dalvik.
The CM11 from month 7, don't have the problem with apps show informativo or manager Kernel, the problem begin o latest version on Nightly version.
I test your rom Omni, is very good, don't have any problems here, but I would like to flash custom Kernel or if this possible, I will appreciate if you put Kernel OC on your AOSP. Thanks sir

No. Oc won't be added and i don't say it again.
Like mentioned: custom kernel won't work fine anymore.
I added some information about the difference between the old and new kernel to the faq on my githubuserpage.
~ All my work, news etc. on http://andi34.github.io ~

Android-Andi said:
No. Oc won't be added and i don't say it again.
Like mentioned: custom kernel won't work fine anymore.
I added some information about the difference between the old and new kernel to the faq on my githubuserpage.
~ All my work, news etc. on http://andi34.github.io ~
Click to expand...
Click to collapse
Sir you is the expert with galaxy tab 2, I try to run vainglory and the game of thrones on galaxy tab 2, the vainglory don't enter on game and the game of thrones shows black screen (you can just hear the voices). You know why cause this problem ? I try to see GPU OpenGL library from Razr i XT890, is the same of tab 2 (SGX540) and it have more extension OpenGL and opens the game of thrones with the graphics, vainglory don't open, because it not compatible with X86.
Have any method to you add latest driver or port the library ?
thanks sir

Android-Andi said:
No. Oc won't be added and i don't say it again.
Like mentioned: custom kernel won't work fine anymore.
I added some information about the difference between the old and new kernel to the faq on my githubuserpage.
~ All my work, news etc. on http://andi34.github.io ~
Click to expand...
Click to collapse
Sir, I found the problem with "os upgrading" on CM11. The gapps from opensourcegapps, is not recomend to download it and flash.... I found the gapps perfect for CM11, I Will upload here. The problem is the gapps to make this issue. I found on your builds, CM11 SNAPSHOTT with slimkat (your build), the rom is very amazing, no problems here, everythings works very nice. Thanks sir

hehk1234 said:
Hello everyone, I've installed CM11 here with pico gapps, The CM 11 is latest version Nightly. The rom boot and everythings works, but when I try to use some apps, for example: Aida 64,Auditor Kernel, OpenGL Extension Viewr, CPU Z, Task Manager. The Tab 2 anormaly restart, I can't open any app that, the Tab 2 always restart. Have any solution for that ? Or I will need to change for another ROM based on KitKat ?
Thanks
Click to expand...
Click to collapse
Why wasting your time and the dev's. You have cm13 is very stable you can run multiple apps without any lag or freezing or sudden reboots. I'm using it since a week now without any problem at all everything works perfectly and smoothly no need at all for overclocking
https://www.androidfilehost.com/?fid=24591000424965117
I always use Pico GAPPS you can get download link from Andi files I suggest that you flash the last twrp
https://www.androidfilehost.com/?fid=24591000424963475

[SPECTRUM SUPPORT] [XIAOMI.EU 8.5] Xtreme97 kernel V2.0

Hello everyone, I present my new kernel for miui 8.5 of xiaomi.eu, it is possible to change the behavior of the CPU as required in an easy and intuitive way, in this first version only has four modes, but I hope Expand soon
WE AREN'T RESPONSIBLE FOR NOTHING
INSTALLATION:
-We reboot in the TWRP, press install, install image and select the boot.img that we downloaded from the post, select flash in the boot partition and install it
-Flash Supersu
-Restart
- Go to the Play Store and look for the Spectrum app (Go to the Screenshot tab and the icon app for zero confussions) and download it
-We open it, grant root access and select the behavior we want
DOWNLOAD:
https://drive.google.com/file/d/0B1LgJ8jYSC9PY0VYSTlYcmFvR1U/view?usp=sharing (V2.0 fixed not changing governors)
XDA:DevDB Information
Xtreme97 kernel, Kernel for the Xiaomi Redmi Note 4
Contributors
xtreme97, Xtreme97
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V2.0
Created 2017-06-22
Last Updated 2017-06-22

Will it work on multi rom last beta?

What are the four modes? Thanks for your work!
Sent from my Redmi Note 4 using Tapatalk

Oasistar67 said:
Will it work on multi rom last beta?
Click to expand...
Click to collapse
I have only tested it in xiaomi.eu 8.5 but you can make a boot.img backup and try it

gsmyth said:
What are the four modes? Thanks for your work!
Sent from my Redmi Note 4 using Tapatalk
Click to expand...
Click to collapse
They are at screenshot tab but are: balance, performance, battery and gaming

i used miui 8 official dev . will it work?

Updated to V2.0

V1.0 it not working?

lehuuhieu said:
V1.0 it not working?
Click to expand...
Click to collapse
it was working, but I found a problem changing governors, now it is fixed

xtreme97 said:
it was working, but I found a problem changing governors, now it is fixed
Click to expand...
Click to collapse
Thanks for your work!

Is this definitely for the MTK version of the RN4?
Could someone review this at all, posting relevant things like performance (benchmarks) and battery life?

Hoax, nothing worth to download here and use

Can you explain please?

This is great!! Thank you, finally! Great, really great work! Tested with latest EU weekly build, with CPU Z , and it works flawlessly.

anyone test for multirom?

testing on MTk 3/64gb, epic Rom 7.3.23 with cosmic tweaks, andbaudio mod, xposed, greenefy and force doze. i ve seen changes when switching profiles, whill test couple of days and report, now on battery profile from 48% battery left and will report SOT after depleting. Great work for DEV .... Nice to see some changes for MTK version.
Thanks once again.

can you teach me how to use custom rom?

Will this work for aosp?

deathkid13 said:
Will this work for aosp?
Click to expand...
Click to collapse
The aosp roms are patch roms and no real aosp ROMs so maybe it works

jigs4wkiller said:
The aosp roms are patch roms and no real aosp ROMs so maybe it works
Click to expand...
Click to collapse
Ok. Thanks man. Gonna do a backup just in case

[ROM] Eui 52x :5.9.026s ACOSlim stable [6.0.1] stable

Hello friend i m not the owener of this rom but i m using it and found its awesome and bugless.
features :
pre rooted by magisk
notification light controller inbuilt
full gapps
no chinese stuff
no letv apps
best baytery backup like new one
no heating issue
fast charging
stable camera , jio , volte
gps working
almost bugless
bug : u tell
How to install
use latest twrp , advance wipe ~data,cache,system,dalvik ~clean install
download link
Mega Link.

ss

reserved

Looks like Batter Saver screenshot is from a different ROM!!!!

@Pkb2003
How's the performance and battery life on this ROM? Also, can I use Superuser instead of Magisk?
Also, where did you find this ROM?
Thanks for sharing.

masteriori said:
@Pkb2003
How's the performance and battery life on this ROM? Also, can I use Superuser instead of Magisk?
Also, where did you find this ROM?
Thanks for sharing.
Click to expand...
Click to collapse
performance and battery life is far better than any other eui and other custom rom
i got this link in a leeco le2 whatsapp group.
i m using it since last 3 days , its just awesome
thats why i shared here

Pkb2003 said:
performance and battery life is far better than any other eui and other custom rom
i got this link in a leeco le2 whatsapp group.
i m using it since last 3 days , its just awesome
thats why i shared here
Click to expand...
Click to collapse
Thanks, I will give it a try. Can you please add some more screenshots so people can see exactly what they get with this ROM. (i.e. Homescreen , App Tray etc)

masteriori said:
Thanks, I will give it a try. Can you please add some more screenshots so people can see exactly what they get with this ROM. (i.e. Homescreen , App Tray etc)
Click to expand...
Click to collapse
yes bro
check here

@Pkb2003, much appreciated.
Final question, I flashed this ROM and it was very smooth but I decided to go back to stock but the new boot screen (with Italian colour scheme) is not going away, any tips?
Thanks

masteriori said:
@Pkb2003, much appreciated.
Final question, I flashed this ROM and it was very smooth but I decided to go back to stock but the new boot screen (with Italian colour scheme) is not going away, any tips?
Thanks
Click to expand...
Click to collapse
Flash stock splash screen

Pkb2003 said:
yes bro
check here
Click to expand...
Click to collapse
Can You Should me your battery usage

Deepjashan said:
Flash stock splash screen
Click to expand...
Click to collapse
Hi, can you share the stock x520 splash screen? I can't seem to find it. Thanks

masteriori said:
Hi, can you share the stock x520 splash screen? I can't seem to find it. Thanks
Click to expand...
Click to collapse
https://forum.xda-developers.com/le-2/themes/mod-splash-screen-le2-t3681928 u can choose ;d

On your firmware, even protected applications are killed, heavy ones, like lineage 2 or it's a bug 26s

Pkb2003 said:
Hello friend i m not the owener of this rom but i m using it and found its awesome and bugless.
features :
pre rooted by magisk
notification light controller inbuilt
full gapps
no chinese stuff
no letv apps
best baytery backup like new one
no heating issue
fast charging
stable camera , jio , volte
gps working
almost bugless
bug : u tell
How to install
use latest twrp , advance wipe ~data,cache,system,dalvik ~clean install
download link
https://mega.nz/#!iYpGWDIL!UuH6VZ5qm5giCGjIDjOxktOjnxbCgzen_fcxcD0T1oU
Click to expand...
Click to collapse
I think somewhere I saw in TG group it has a multiwindow feature via zip as well
Sent from my Le X520 using Tapatalk

How to change the lock screen wallpaper? Looks like the personalize setting is not workin.

Bro this ROM support live wallpapers or not?

#sunny said:
Bro this ROM support live wallpapers or not?
Click to expand...
Click to collapse
supporting but with default launcher
use google now

I get this bug

rohit138 said:
I get this bug
Click to expand...
Click to collapse
this is not a bug, select three dot menu option then select internal memory show