CM11 Galaxy Tab 2 P3110 Problems - Galaxy Tab 2 Q&A, Help & Troubleshooting

Hello everyone, I've installed CM11 here with pico gapps, The CM 11 is latest version Nightly. The rom boot and everythings works, but when I try to use some apps, for example: Aida 64,Auditor Kernel, OpenGL Extension Viewr, CPU Z, Task Manager. The Tab 2 anormaly restart, I can't open any app that, the Tab 2 always restart. Have any solution for that ? Or I will need to change for another ROM based on KitKat ?
Thanks

Only apps which require root?

Android-Andi said:
Only apps which require root?
Click to expand...
Click to collapse
No, aida 64 just show all the information of your device..... without root, CPU-Z too
Task manager from ohmi software, when I open it the device restart....
all apps show any information about android + hardware, the device restart :/
thanks for reply

Android-Andi said:
Only apps which require root?
Click to expand...
Click to collapse
Another problem I've found is When I flash blackhawk, dhollmen or any stock kernel form CM11, I get problem everytime ''OS upgrading'' when I reboot, all builds CM11.
I hope it can be fixed on future , thanks Sir for your great work here

hehk1234 said:
Another problem I've found is When I flash blackhawk, dhollmen or any stock kernel form CM11, I get problem everytime ''OS upgrading'' when I reboot, all builds CM11.
I hope it can be fixed on future , thanks Sir for your great work here
Click to expand...
Click to collapse
Custom kernel don't work fine after latest updates, to much stuff changed. Get rid of it.
About the reboot: you switched to ART?
~ All my work, news etc. on http://andi34.github.io ~

Android-Andi said:
Custom kernel don't work fine after latest updates, to much stuff changed. Get rid of it.
About the reboot: you switched to ART?
~ All my work, news etc. on http://andi34.github.io ~
Click to expand...
Click to collapse
No, I didn't switched to ART, only Dalvik.
The CM11 from month 7, don't have the problem with apps show informativo or manager Kernel, the problem begin o latest version on Nightly version.
I test your rom Omni, is very good, don't have any problems here, but I would like to flash custom Kernel or if this possible, I will appreciate if you put Kernel OC on your AOSP. Thanks sir

No. Oc won't be added and i don't say it again.
Like mentioned: custom kernel won't work fine anymore.
I added some information about the difference between the old and new kernel to the faq on my githubuserpage.
~ All my work, news etc. on http://andi34.github.io ~

Android-Andi said:
No. Oc won't be added and i don't say it again.
Like mentioned: custom kernel won't work fine anymore.
I added some information about the difference between the old and new kernel to the faq on my githubuserpage.
~ All my work, news etc. on http://andi34.github.io ~
Click to expand...
Click to collapse
Sir you is the expert with galaxy tab 2, I try to run vainglory and the game of thrones on galaxy tab 2, the vainglory don't enter on game and the game of thrones shows black screen (you can just hear the voices). You know why cause this problem ? I try to see GPU OpenGL library from Razr i XT890, is the same of tab 2 (SGX540) and it have more extension OpenGL and opens the game of thrones with the graphics, vainglory don't open, because it not compatible with X86.
Have any method to you add latest driver or port the library ?
thanks sir

Android-Andi said:
No. Oc won't be added and i don't say it again.
Like mentioned: custom kernel won't work fine anymore.
I added some information about the difference between the old and new kernel to the faq on my githubuserpage.
~ All my work, news etc. on http://andi34.github.io ~
Click to expand...
Click to collapse
Sir, I found the problem with "os upgrading" on CM11. The gapps from opensourcegapps, is not recomend to download it and flash.... I found the gapps perfect for CM11, I Will upload here. The problem is the gapps to make this issue. I found on your builds, CM11 SNAPSHOTT with slimkat (your build), the rom is very amazing, no problems here, everythings works very nice. Thanks sir

hehk1234 said:
Hello everyone, I've installed CM11 here with pico gapps, The CM 11 is latest version Nightly. The rom boot and everythings works, but when I try to use some apps, for example: Aida 64,Auditor Kernel, OpenGL Extension Viewr, CPU Z, Task Manager. The Tab 2 anormaly restart, I can't open any app that, the Tab 2 always restart. Have any solution for that ? Or I will need to change for another ROM based on KitKat ?
Thanks
Click to expand...
Click to collapse
Why wasting your time and the dev's. You have cm13 is very stable you can run multiple apps without any lag or freezing or sudden reboots. I'm using it since a week now without any problem at all everything works perfectly and smoothly no need at all for overclocking
https://www.androidfilehost.com/?fid=24591000424965117
I always use Pico GAPPS you can get download link from Andi files I suggest that you flash the last twrp
https://www.androidfilehost.com/?fid=24591000424963475

Related

[2013-02-12][ROM - CyanogenMod 10 - JB 4.1.2 - UNOFFICIAL]

Hey fellas,
I just start to compile a CM10 rom for my own use from the source and I wish to share with you guys.
So far so good, seems everything is working fine.
Instructions..
You probably know.. but just in case..
1. Boot to recovery (MANDATORY A TOUCH RECOVERY - I strongly recommend the RaymanFX's recovery (plenty of useful features): http://forum.xda-developers.com/showthread.php?t=1855686) (Thanks to RaymanFX)
2. Darkside super wipe - Thanks to him!
3. Wipe data/factory reset
4. Flash the rom
5. Reboot
6. Flash the GAPPS - http://goo.im/devs/Formula84/gapps-jb-20121012-4.1.2-JZO54K (Thanks to Formula84)
7. Reboot and have fun
Attention:
1. Do not install any kind of cpu manager, for now, like setCPU. Keep for now the stock frequencies. It can cause SODs and RRs.
2. When using Titanium Backup do not proceed restoration of data. It can be corrupted or even incompatible in some point to new releases. It can cause FCs.
Attention about to post a bug:
1. Before to post a bug, PLEASE, try to reproduce it at least twice.
2. Make sure that is not related to a bad and dirty flash, you can try to wipe cache and dalvik.
3. Be polite, after all, we are doing this for fun and for the pleasure of share, with no benefits at all.
4. You can contribute here with some debug methodology lol
Changelog (?!) (just a short description about what has changed in CM10 Source):
- Usual changes at the CM source. For more details http://review.cyanogenmod.com/#/q/status:merged,n,z (Thanks to krazeecracker)
- More about official CM changelog http://changelog.bbqdroid.org/#tf101cm10/next (Thanks to mobbarley)
- much more to come soon.. (just let me have some time to go through the kernel source code )
ROM
2013-02-12
http://goo.im/devs/erickwill/tf101/cm-10-20130212-UNOFFICIAL-tf101.zip
MD5SUM - dcb4a330156515d5f238fc4ee829033d cm-10-20130212-UNOFFICIAL-tf101.zip
For old releases:
http://goo.im/devs/erickwill/tf101/
ATTENTION
You DON'T need to install any other kernel. Everything works fine, at least in my end
As usual, THANKS everybody involved somehow in CyanogenMod development!
Hope you enjoy as I am enjoying this awesome branch.
PS. As also usual, I don't wanna get in flame with anyone over here. So please, any issue PM and I will, promptly, try to resolve any dispute or simply remove the content. I am posting this for fun and for the pleasure to share something that has been cool for me.
Oh, and please, just note that I am not responsible for bricked devices, dead SD cards and so on.
Have fun!
Guess I'm the only one in the mood to Flash a Rom tonight... So thanks
Mee too !! + 1
---------- Post added at 07:00 AM ---------- Previous post was at 06:43 AM ----------
And to be sure, what gapps are you using? Link please...
Very good.is dock working well and HDMI audio out put work?
Inviato dal mio Nexus S con Tapatalk 2
so I want to know if:
-NTFS R/W is working;
-HDMI A/V is working
-docking is working
-it is speedly
thanks a lot
Does this use my dock lid kernel space patch?
Hi,
Before trying, why all your links are for GS2 ? No risk for the Transformer ?
Caramel said:
Hi,
Before trying, why all your links are for GS2 ? No risk for the Transformer ?
Click to expand...
Click to collapse
We need to email cm team to they refresh/update/add tf101 device manteiners. We dont have one active for us anymore.
Caramel said:
Hi,
Before trying, why all your links are for GS2 ? No risk for the Transformer ?
Click to expand...
Click to collapse
Of course it's safe! I tried myself in my own tf101 otherwise I wouldn't post it here. Please check my signature and you'll read recognized dev okay?
prendomiao said:
so I want to know if:
-NTFS R/W is working;
-HDMI A/V is working
-docking is working
-it is speedly
thanks a lot
Click to expand...
Click to collapse
This is a compilation straight from the source, so as something is released from CM source it's available here, including fixes and other features
Enjoy
so they work?
Ahem..... Is the gapps update for 4.1.2?
Thanks.
Everything just works !! I am using the 4.1.1 gapps.....
Great ROM !
chappatti said:
Ahem..... Is the gapps update for 4.1.2?
Thanks.
Everything just works !! I am using the 4.1.1 gapps.....
Great ROM !
Click to expand...
Click to collapse
I'm using this version here. No problems to report on RaymanFX's Cyanogen 10 ROM. Formula84 always seems to have the latest GAPPS. I've used his previous two versions without issues.
grgmre said:
I'm using this version here. No problems to report on RaymanFX's Cyanogen 10 ROM. Formula84 always seems to have the latest GAPPS. I've used his previous two versions without issues.
Click to expand...
Click to collapse
Thanks, added this gapps at the op
[2012-10-14] [ROM - CyanogenMod 10 - JB 4.1.2 - UNOFFICIAL]
New release available:
ROM
2012-10-14
http://goo.im/devs/erickwill/tf101/cm-10-20121014-UNOFFICIAL-tf101.zip
Have fun!
What are the differences from just downloading the nightlies from get.cm?
st0nedpenguin said:
What are the differences from just downloading the nightlies from get.cm?
Click to expand...
Click to collapse
For now is pretty much the same thing, except by the way how each compiler gonna proceed in each compilation, I mean using different versions of JDK or tool chains..
I will be adding some cherries and my own stuffs pretty soon
[2012-10-14 - Revision 01] [ROM - CyanogenMod 10 - JB 4.1.2 - UNOFFICIAL]
Hey fellas,
Here you go the latest updates from the CM sources
ROM
2012-10-14 - Revision 01
http://goo.im/devs/erickwill/tf101/cm-10-20121014-UNOFFICIAL-tf101.r1.zip
Have fun!
Keeps Rebooting To Recovery
Flashed 4.1.2 with no errors. Everytime I reboot it goes to recovery. The only way I can get into the TF is a cold restart. Any suggestions?
erickwill said:
For now is pretty much the same thing, except by the way how each compiler gonna proceed in each compilation, I mean using different versions of JDK or tool chains..
I will be adding some cherries and my own stuffs pretty soon
Click to expand...
Click to collapse
The problem now with TF101 is to get a stable JB ROM, we have some nice nightly stuff like TeamEOS, JellyBro and RaymanFX CM10, but they're not really daily drivers, we need something like Megatron CM9, stable hi performance and battery saving ROM. And of course, kernel devs are so reaaly needed, since gevor hillness there's lot of ROMs out there but nohi powred kernels.
You said the magic word: cherries! If your way is to make a stable and smooth daily driver ROM count me in.
I have an idea to share/request: the CM10 wifi system is somewhat using an "old" scheme, maybe that could be tuned to "new"scheme, to work with Guevor CM10 kernel for instance.
Hope you continue this work, tf101 needs skilled devs.

Viper4Android TW Lollipop Tutorial [UPDATED]

First off, you do this at your own risk and I'm not responsible for any damage to your phone etc etc. Also, thanks to it's ties with Sound Alive, it won't work with the stock music player unfortunately but I have tested it with both Spotify and GoneMad and it works perfectly with both.
I'm using this on AryaMod 3.1, so this should mean the instructions below work on any N9005ZSUGOA5 based Lollipop rom.
1) Download and install DarkQueen Kernel here. Thank @hiepgia.
2) Add the line "setenforce 0" (without the quotes) to the end of the file /sýstem/etc/init.qcom.post_boot.sh. This will ensure a permissive state on boot. Thanks to @hiepgia and @filchi756 for this.
3) Download and install the new Viper4Android 2.3.4.0 here. Run, install the driver.
4) Find and freeze/delete Sound Alive. This being present is bad in particular for Spotify, which will always use Sound Alive in preference to Viper4Android.
Reboot enjoy Viper goodness.
For people who want to use the stock player, see @filchi756 post here
For people running AyraMod V4.0, ignore the above instructions, select DarkQueen kernel via Aroma on install (this will automatically result in permissive SE) and please see @filchi756's modified zip here. Don't forget to thank him.
Awesome
Finally!
Oh I am seeking for that. :good::good::good:
After flashing this kernel, WiFi stopped working... Anybody else has this issue? SM-N9005
slavko17 said:
After flashing this kernel, WiFi stopped working... Anybody else has this issue? SM-N9005
Click to expand...
Click to collapse
it works fine like a charm
Unfortunately, it won't work for me... As soon as I flash stock kernel back - wifi is working like a charm again. Tried to do factory reset after flashing this Dark Queen Kernel - it didn't solve the problem.
Any suggestions would be appreciated.
slavko17 said:
Unfortunately, it won't work for me... As soon as I flash stock kernel back - wifi is working like a charm again. Tried to do factory reset after flashing this Dark Queen Kernel - it didn't solve the problem.
Any suggestions would be appreciated.
Click to expand...
Click to collapse
We have the same situation. .I think we have to wait for google to release the lollipop sources for note3 and wait for someone to make a custom kernel intended for our phone.
OP updated.
You eventually did it. Well done!
Nice one! Could anybody make it work with the stock Samsung Music Player using this tutorial? It seems this app is deeply integrated with SoundAlive, so at least with KK it was impossible to make it work reliably with V4A. But things may have changed with LL...
Yeah, unfortunately it appears to be the same here. I froze Sound Alive to get Viper working with Spotify, but this results in no effects whatsoever with the stock music player. Personally, this doesn't bother me as there are far better players on the market.
slavko17 said:
After flashing this kernel, WiFi stopped working... Anybody else has this issue? SM-N9005
Click to expand...
Click to collapse
What baseband are you on? You have the same phone model as myself and my wifi works fine. I suspect it might be related to your modem/NON-HLOS.
Overall everything works fine except few bugs from the Darkqueen kernel, like brightness changes sometimes when I lock/unlock the phone.
Attachement selinuxpermissive installation failed :crying:
rafik25 said:
Attachement selinuxpermissive installation failed :crying:
Click to expand...
Click to collapse
What fails? Did you give it full permissions?
Try this one instead.
Beefheart said:
What baseband are you on? You have the same phone model as myself and my wifi works fine. I suspect it might be related to your modem/NON-HLOS.
Click to expand...
Click to collapse
I'm on the newest XEO Lollipop available from sammobile, so the modem version I have is BNL8.
Thanks for trying to help me
I'm on GNH1 myself. Might be worth trying another to see if the WIFI works.
Sir please help us too. I'm using galaxy s4 i9500 with official lollipop installed. we don't have any permissive kernel.
jagnik said:
Sir please help us too. I'm using galaxy s4 i9500 with official lollipop installed. we don't have any permissive kernel.
Click to expand...
Click to collapse
If you're correct and there is no kernel which is either permissive or can be made permissive then Viper is currently unusable on the Exynos variant of the S4. It's currently impossible to use Viper on an enforcing TW ROM.

The perfect setup of Moto X Play

Hey guys!
Power users already have custom kernels and ROMs, and it is possible to tune some advanced settings with and without root, so what did you modified on yours?
A lot of users reported performance issues and others just want more features, more efficiency, etc. Of course, there are those who just likes the device the way it comes from Motorola or don't want to void the warranty.
With all this diversity, I created this thread for we discuss what is the best setup for our device and how can we extract the best of it.
Curently mine is with stock ROM, Xposed, GravityBox and squid's custom kernel.
This setup provides me all Moto features, plus lots of features with GravityBox. I think that the performance is better, because I changed some settings with Kernel Adiutor.
Why
fingerprinted said:
Why
Click to expand...
Click to collapse
Since each person uses a phone in a way, my idea was to create a space where people could tell which ROM, kernel, apps, themes and other things they use and share the benefits they get. This would make possible to all Moto X Play owners discover new things that could improve the user experience and everybody would win.
Stock rom, greenify, amplify (xda thread for great battery), lspeed mod. Works fine for me
LuizHenrique91 said:
Curently mine is with stock ROM, Xposed, GravityBox and squid's custom kernel.
This setup provides me all Moto features, plus lots of features with GravityBox. I think that the performance is better, because I changed some settings with Kernel Adiutor.
Click to expand...
Click to collapse
I find that installing xposed on my device causes choppy audio playback. Does this happen with you?
I'm using BlackPlayer and phonograph
hs-1993 said:
I find that installing xposed on my device causes choppy audio playback. Does this happen with you?
I'm using BlackPlayer and phonograph
Click to expand...
Click to collapse
Now I'm on Cyanogenmod with a custom kernel, both by squid.
But I remember that when I was on stock, I had no problems with audio neither before or after installing Xposed.
Ohh.. Alright, having never used an android device, how do you find the performance of the device on cyanogenmod compared to stock? Is it worth flashing?
hs-1993 said:
Ohh.. Alright, having never used an android device, how do you find the performance of the device on cyanogenmod compared to stock? Is it worth flashing?
Click to expand...
Click to collapse
Totally worth it! X Play doesn't have good performance with the stock ROM at this time. There are lags that we don't expect to find on a device at this price range. With Cyanogenmod the UI is very smooth. There are still some lags, but they're normal because we don't have a device with a Snapdragon 8xx. I can say you that with CM, the performance is just as good as you could expect of this hardware (and it's very good). If you are going to flash, I also recommend the squid kernel. It's great.
Here is the index of Moto X Play on XDA: http://forum.xda-developers.com/moto-x-play/general/17-10-t3227295
Thanks man, will let you know. I tried the squid kernel yesterday, phone wouldn't resume out of deep sleep
Any such problems with cyanogenmod that might have occured due to squid kernel?
hs-1993 said:
Thanks man, will let you know. I tried the squid kernel yesterday, phone wouldn't resume out of deep sleep
Any such problems with cyanogenmod that might have occured due to squid kernel?
Click to expand...
Click to collapse
The only problem I *think* some people have is that on certain wi-fi networks, the wi-fi driver prevents the phone from sleeping. I said *I think* because I don't have this issue and because of this I'm not sure whether it's already solved or if the problem persists. I suggest you to read at least the last pages from the threads of CM and the kernel for you to be sure.
What I can say is that for my usage, I have absolutely no problems. Everything works fine.
i'm using RR 5.5.8 + squid kernel latest update, greenify + amplify, working fine
Does Squid kernel (or Cyanogenmod ) solve the problem of RECENT APPS ?
I mean the impossibility for erasing them all with a single button.
peteich said:
Does Squid kernel (or Cyanogenmod ) solve the problem of RECENT APPS ?
I mean the impossibility for erasing them all with a single button.
Click to expand...
Click to collapse
Cyanogenmod has this feature.
LuizHenrique91 said:
Cyanogenmod has this feature.
Click to expand...
Click to collapse
thank you !
peteich said:
Does Squid kernel (or Cyanogenmod ) solve the problem of RECENT APPS ?
I mean the impossibility for erasing them all with a single button.
Click to expand...
Click to collapse
GravityBox on stock Rom as well :good: needs root + xposed though
brom25 said:
GravityBox on stock Rom as well :good: needs root + xposed though
Click to expand...
Click to collapse
Just found this feature myself earlier today!
Someone can explain me or give me the link on how to install xposed on my moto x thx
Envoyé de mon XT1563 en utilisant Tapatalk
aarmstrong23 said:
Someone can explain me or give me the link on how to install xposed on my moto x thx
Envoyé de mon XT1563 en utilisant Tapatalk
Click to expand...
Click to collapse
Flash TWRP, root the device then check this thread : http://forum.xda-developers.com/moto-x-play/help/xposed-t3191338/post63940401 to be sure which version to use.
Basically, flash the zip provided and reboot :good:
For the first time waiting a little before rooting this phone, since 6.0 is rolling out soon.
As of today mine is running quite smooth on stock 5.1.1
Just disabled all unused/useless apps,
limited the connections and data usage with Netguard and Opera max.
Will keep you posted.

[DISCUSSION] Best Stable and Fastest ROM for our device currently

Hey Guys! So, I want to know that which ROM do you think is the most stable and fast ROM available currently on our device? I prefer speed over features. Also Xposed and ViperFX should preferably work. Am currently on CM 13 but it doesn't over kernel OC.
ALL REPLIES ARE APPRECIATED!!!
Liquid Smooth v3.2 + AGNi Kernel = BEAST
levider said:
Liquid Smooth v3.2 + AGNi Kernel = BEAST
Click to expand...
Click to collapse
Thanks for your opinion, but link please. Also, does Xposed and ViperFX work on it?
LS
http://forum.xda-developers.com/showthread.php?t=2728176
AGNi
http://forum.xda-developers.com/showthread.php?t=2197385
Links are dead, but I can upload it for P3100
My friend has got P3110 rom
Yes, i have Xposed - working very well
I don't using ViperFX, but there is DSP Manager
I think it's similar to ViperFX ;p
levider said:
LS
http://forum.xda-developers.com/showthread.php?t=2728176
AGNi
http://forum.xda-developers.com/showthread.php?t=2197385
Links are dead, but I can upload it for P3100
My friend has got P3110 rom
Yes, i have Xposed - working very well
I don't using ViperFX, but there is DSP Manager
I think it's similar to ViperFX ;p
Click to expand...
Click to collapse
I would appreciate it if you uploaded the link for my P3100. Also, do you have any idea of the score in Antutu. Also, are there any major bugs.
I do not looking at antutu because it depends on too many factors.
Does not show how the phone working on the truth..
I will upload ROM today, later
@edit
https://mega.nz/#!kJ0nDDSA!XwLuwIXlTMi_8acP29_xMcsMZAtkyPV1MDayE69_MEU
Can someone suggest Best Stable and Fastest ROM for p5100
levider said:
I do not looking at antutu because it depends on too many factors.
Does not show how the phone working on the truth..
I will upload ROM today, later
@edit
https://mega.nz/#fm/QAkTmICA
Click to expand...
Click to collapse
Thanks a bunch. Just three questions :
1) Is this ROM a beta build or stable build?
2) Is it 4.4.4 Kitkat?
3) Can I use open gapps with this? If not, what can I use?
akshay1605 said:
Can someone suggest Best Stable and Fastest ROM for p5100
Click to expand...
Click to collapse
SlimKat?
levider said:
I do not looking at antutu because it depends on too many factors.
Does not show how the phone working on the truth..
I will upload ROM today, later
@edit
https://mega.nz/#fm/QAkTmICA
Click to expand...
Click to collapse
Link doesn't work. When I click on the link and login, it just directs me to my own drive. Please fix. I'm very excited to try this ROM out.
adityabanerjee1303 said:
Thanks a bunch. Just three questions :
1) Is this ROM a beta build or stable build?
2) Is it 4.4.4 Kitkat?
3) Can I use open gapps with this? If not, what can I use?
Click to expand...
Click to collapse
1) It's stable
2) Yes
3) Yes. I'm using slim mini gapps
I will upload rom soon, now i have problems with my fck internet ;x
@edit
I forget about key..
https://mega.nz/#!kJ0nDDSA!XwLuwIXlTMi_8acP29_xMcsMZAtkyPV1MDayE69_MEU
levider said:
1) It's stable
2) Yes
3) Yes. I'm using slim mini gapps
I will upload rom soon, now i have problems with my fck internet ;x
@edit
I forget about key..
https://mega.nz/#!kJ0nDDSA!XwLuwIXlTMi_8acP29_xMcsMZAtkyPV1MDayE69_MEU
Click to expand...
Click to collapse
Thank you. Now, just a last one. Can you provide detailed instructions to flash this ROM.
adityabanerjee1303 said:
Thank you. Now, just a last one. Can you provide detailed instructions to flash this ROM.
Click to expand...
Click to collapse
Full wipe (cache/system/dalvik/internal)
Flash ROM and Gapps
Turn on your tablet
Now go to recovery and flash AGNi Kernel
Turn on your tablet and go to agni control application
Gallery FC
levider said:
Full wipe (cache/system/dalvik/internal)
Flash ROM and Gapps
Turn on your tablet
Now go to recovery and flash AGNi Kernel
Turn on your tablet and go to agni control application
Click to expand...
Click to collapse
I installed your ROM but gallery fc. Other than that, its pretty cool.
adityabanerjee1303 said:
I installed your ROM but gallery fc. Other than that, its pretty cool.
Click to expand...
Click to collapse
For me gallery working very well
What's your cpu max frequency in AGNi Control?
Working GREAT now.
levider said:
For me gallery working very well
What's your cpu max frequency in AGNi Control?
Click to expand...
Click to collapse
Okay, now it's working fine. Sorry, before I didn't flash Agni Kernel. AWESOME ROM. BEST KITKAT ROM I'VE EVER USED! I think I'm gonna be sticking to this for a while. Just two things:
1) When I installed ViperFX, it didn't show driver options. Effects are working nonetheless.
2) The ROM has a theme engine built in. What kind of themes can I use???

[ROM][DEPRECATED] OLD Cyanogenmod 11

ROM DEPRECATED, USE LAST CM11 HERE
ROM DEPRECATED, USE LAST CM11 HERE
USE ONLY LASTEST BUILD
I forgot the rom name but there's a kitkat rom with no screen flickering issue by niropa (on lollipo bootloader). u can contact with niropa to solve screen flickering issue.
Yes,was in a wrong place, i have contacted a moderator, now is in android development.
Ok , i think cm11 its the most stable tree from cm team , i like KK because its more ligth weigth , i dont know why the developers wonma make roms unstable and buggies hehe , can u add a custom features? Like another toolchain? (Linaro , Uber) or new features from kernel? Like more i/o (zen ) , gpu OC or cpu OC?...
Anyway , Thank U its run great
Enviado desde mi Moto G mediante Tapatalk
STR4NG3R-GUY said:
Ok , i think cm11 its the most stable tree from cm team , i like KK because its more ligth weigth , i dont know why the developers wonma make roms unstable and buggies hehe , can u add a custom features? Like another toolchain? (Linaro , Uber) or new features from kernel? Like more i/o (zen ) , gpu OC or cpu OC?...
Anyway , Thank U its run great
Enviado desde mi Moto G mediante Tapatalk
Click to expand...
Click to collapse
unfortunately I am only at the beginning, I'm learning slowly how to create rom from source code, for the moment I do not know to create kernels with overcloclock or similar. I'm only 15 years old, and this is the second ROM in total which I compile
SLATE21&MOTOG said:
this rom works with all bootloader, kitkat and lollipop, but with the lollipop one you will get screen flickering. If anyone knows how I can do a build with no screen flickering can contact me in pm.
Click to expand...
Click to collapse
See PACMan builds with overkill kernel by niropa. Just search in that thread and you'll find many ROMs like CarbonKK or PA, which are made to work on LP bootloader
Will this work on msim variant also? I read you mentioned xt1032 but still if you know..
It might work, but has been tested only on xt1032 aka falcon.
tested on XT1033, very stable ROM, smooth ROM ever :fingers-crossed::fingers-crossed:
Stock cm11 kernel or something else is there? I can see "overkill kernel" that reminds me really good things
Rocketval said:
Stock cm11 kernel or something else is there? I can see "overkill kernel" that reminds me really good things
Click to expand...
Click to collapse
Yes, I have used Overkill kernel that @Niropa has used in his Pac-man rom build, with the hope of fix the screen flickering, but the problem remain. This is aniway a good and stable kernel. For more information see: https://github.com/ReaperXL2/Overkill_V4_extended/tree/cm-11.0
SLATE21&MOTOG said:
Yes, I have used Overkill kernel that @Niropa has used in his Pac-man rom build, with the hope of fix the screen flickering, but the problem remain. This is aniway a good and stable kernel. For more information see: https://github.com/ReaperXL2/Overkill_V4_extended/tree/cm-11.0
Click to expand...
Click to collapse
But are kernel sources updated? Or using it cause some incompatility such as hotspot, bt or something else?
All work fine, bluetooth and hotspot work. I have tested it, the only warnings are 3:
-Do not active kernel samepage merging, you will have problem in camera
-install gapps only after the first reboot of the rom
-If you use whatsapp install it before switching to ART (in developer setting, for better performance select ART)
There aren't particular bugs
SLATE21&MOTOG said:
All work fine, bluetooth and hotspot work. I have tested it, the only warnings are 3:
-Do not active kernel samepage merging, you will have problem in camera
-install gapps only after the first reboot of the rom
-If you use whatsapp install it before switching to ART (in developer setting, for better performance select ART)
There aren't particular bugs
Click to expand...
Click to collapse
Why gapps only on second boot?
ale467 said:
Why gapps only on second boot?
Click to expand...
Click to collapse
Because if you install the rom and after the gapps and you reboot, the setup wizard crash. I have tryed it
https://www.youtube.com/watch?v=YFATFIufW7Q&feature=youtu.be
This is a small video demonstration of the rom, 60 second.
SLATE21&MOTOG said:
Yes, I have used Overkill kernel that @Niropa has used in his Pac-man rom build, with the hope of fix the screen flickering, but the problem remain. This is aniway a good and stable kernel. For more information see: https://github.com/ReaperXL2/Overkill_V4_extended/tree/cm-11.0
Click to expand...
Click to collapse
Check out xperience kernel to get rid of screen flickering
Niropa said:
Check out xperience kernel to get rid of screen flickering
Click to expand...
Click to collapse
could you give me the kernel link on github ?
SLATE21&MOTOG said:
could you give me the kernel link on github ?
Click to expand...
Click to collapse
I don't have the link I haven't built for the moto g in ages, just go to the xperience thread, their is only 1 kernel by teamex called xperience

Categories

Resources