Database Info

Cannot figure out this brick...

I have a soft bricked S3 thats really stumped me. Its hanging at the verizon boot video so i figured i would just ODIN back to stock and be done with it. Everytime i try to flash VRALEC.bootchain.tar.md5 i fail. I tried to flash stock.vzw_root66 and i fail. I tried to flash COMBINATION_I535VRBLK3_I535VZWBLK3_381038_REV09_user_low_ship.tar.md5 and i fail. Ive tried different cables and different USB ports but i cant get odin to flash anything. Please help lol. I am using a NON rooted device.

heyitsdan03 said:
I have a soft bricked S3 thats really stumped me. Its hanging at the verizon boot video so i figured i would just ODIN back to stock and be done with it. Everytime i try to flash VRALEC.bootchain.tar.md5 i fail. I tried to flash stock.vzw_root66 and i fail. I tried to flash COMBINATION_I535VRBLK3_I535VZWBLK3_381038_REV09_user_low_ship.tar.md5 and i fail. Ive tried different cables and different USB ports but i cant get odin to flash anything. Please help lol. I am using a NON rooted device.
Click to expand...
Click to collapse
Are you putting the .tar file in the PDA slot in Odin?
Is your phone in download mode?
What base was you phone when it was working? ICS or JB?
If ICS stick with flashing root66 ICS for now (not any bootchains or modems) so that we can focus of getting your phone working first before any type of upgrade.
Also, if you cannot restore your phone by simply flashing root66 in Odin, follow this guide HOW-TO Unbrick Your Soft-Bricked Galaxy S III

corbn89 said:
Are you putting the .tar file in the PDA slot in Odin?
Is your phone in download mode?
What base was you phone when it was working? ICS or JB?
If ICS stick with flashing root66 ICS for now (not any bootchains or modems) so that we can focus of getting your phone working first before any type of upgrade.
Also, if you cannot restore your phone by simply flashing root66 in Odin, follow this guide HOW-TO Unbrick Your Soft-Bricked Galaxy S III
Click to expand...
Click to collapse
I am a base ICS and yes i have the phone in download mode, and i am using the pda slot but i cant get anything at all to flash sucessfully. That is the guide that i got the files from and i cant even get the first file to flash....
1.Open up ODIN
2.Select only the following box: F. Reset Time
3.Flash the VRALEC bootchain in the PDA section and wait for a PASS message
Thats where i get a fail message
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)

heyitsdan03 said:
I am a base ICS and yes i have the phone in download mode, and i am using the pda slot but i cant get anything at all to flash sucessfully. That is the guide that i got the files from and i cant even get the first file to flash....
1.Open up ODIN
2.Select only the following box: F. Reset Time
3.Flash the VRALEC bootchain in the PDA section and wait for a PASS message
Thats where i get a fail message
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Did you check your MD5's? Also, just confirming that you already tried to restore by flashing root66 .tar in PDA with only Auto Reboot and F. Reset checked off? Also, read the second post in that guide and see if your symptoms are similar to the guide's second brick scenario.

corbn89 said:
Did you check your MD5's? Also, just confirming that you already tried to restore by flashing root66 .tar in PDA with only Auto Reboot and F. Reset checked off? Also, read the second post in that guide and see if your symptoms are similar to the guide's second brick scenario.
Click to expand...
Click to collapse
Yes i tried to flash just the root66 and this is what i get:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (WP)
<OSM> All threads completed. (succeed 0 / failed 1)
And i also tried the other guys post and this is what i get there:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (WP)
<OSM> All threads completed. (succeed 0 / failed 1)

What were you doing when it hung at the Verizon splash screen(what caused the brick)?

letinsh said:
What were you doing when it hung at the Verizon splash screen(what caused the brick)?
Click to expand...
Click to collapse
This is a friend of mines phone and from what i understand she was doing the jellybean update and it lost power in the middle of it

heyitsdan03 said:
This is a friend of mines phone and from what i understand she was doing the jellybean update and it lost power in the middle of it
Click to expand...
Click to collapse
Have you tried resetting the phone via the stock recovery?

corbn89 said:
Have you tried resetting the phone via the stock recovery?
Click to expand...
Click to collapse
stock recovery wont boot

you're using Odin v3.07?
---------- Post added at 03:45 PM ---------- Previous post was at 03:40 PM ----------
wait.
Stock recovery won't load, but you can get into download mode?

letinsh said:
you're using Odin v3.07?
---------- Post added at 03:45 PM ---------- Previous post was at 03:40 PM ----------
wait.
Stock recovery won't load, but you can get into download mode?
Click to expand...
Click to collapse
Yes, recovery wont boot but i can get into download mode, and i am using odin 3.07

Maybe this will help, i tried for the hell of it to boot normal and now it will go past the splash screen and come up to an "encryption failed" error with a reset button. The reset button does nothing..

have you tried getting into recover since the Odin flash failed?
Also, do you have Kies running on your computer? When using Odin, kies needs to be disabled.
---------- Post added at 04:14 PM ---------- Previous post was at 04:05 PM ----------
A little different approach.
this thread: http://forum.xda-developers.com/showthread.php?t=1974114
Try the VRBLK3 files (official vzw jb).

Yes i just tried again and nothing... and no i dont have kies even installed

letinsh said:
have you tried getting into recover since the Odin flash failed?
Also, do you have Kies running on your computer? When using Odin, kies needs to be disabled.
---------- Post added at 04:14 PM ---------- Previous post was at 04:05 PM ----------
A little different approach.
this thread: http://forum.xda-developers.com/showthread.php?t=1974114
Try the VRBLK3 files (official vzw jb).
Click to expand...
Click to collapse
This is what i get when i flash VRBLK3
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)

heyitsdan03 said:
This is what i get when i flash VRBLK3
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
That's the file you mentioned in the OP or the one I just pointed you to (different files)?

That last one was the file you pointed to me and yes they were different files, neither one work.

Flash this (stock bootchain) in PDA: http://truelinux.net/sch-i535/bootchains/BOOTLOADER_I535VRALF2_618049_REV09_user_low_ship.tar.md5
then download this (stock rom), unzip it, and flash in PDA:
http://goo.im/devs/invisiblek/i535/...535VZWALG1_743127_REV09_user_low_ship.tar.zip
Having so many files fail with an Odin flash makes me think the error is caused by something else, though...

What else could it be?
Sent from my SAMSUNG-SGH-I747 using xda premium

Honestly, we've reached the limit of my experience. Must issues with Odin result from the physical connection. I know you tried different cords and different ports. I assume you're doing this, but make sure your usb cable is plugged into a port on the motherboard, not a hub or remote port.
I honestly don't know what the next step is... Reinstall drivers and Odin?
Sent from my SCH-I535 using xda app-developers app

Can't root OG1 - help

My Galaxy S5 (Sprint) updated to G900PVPU3BOG1 "OG1" firmware.
SInce then I can not root the phone with CF-Auto_root as usual. I tried TWRP (my fav), Clockworkmod, & philz touch. All give me a FAIL in ODIN.
I tried ODIN 3.10 and 3.09.
I also tried to flash custom ROMs with ODIN with similar FAIL in ODIN.
Now, I've flashed and rooted my S3 and S5 a number of times of different PCs without issues but nothing seems to work since I got OG1.
Is this a security issue with OG1? Am I missing something? I've exhausted all options I know of.
Joe
Here is what ODIN says when applying TWRP 2.8.7.0
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> recovery.img
<ID:0/009> NAND Write Start!!
<ID:0/009> FAIL! (Auth)
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

[email protected] said:
My Galaxy S5 (Sprint) updated to G900PVPU3BOG1 "OG1" firmware.
SInce then I can not root the phone with CF-Auto_root as usual. I tried TWRP (my fav), Clockworkmod, & philz touch. All give me a FAIL in ODIN.
I tried ODIN 3.10 and 3.09.
I also tried to flash custom ROMs with ODIN with similar FAIL in ODIN.
Now, I've flashed and rooted my S3 and S5 a number of times of different PCs without issues but nothing seems to work since I got OG1.
Is this a security issue with OG1? Am I missing something? I've exhausted all options I know of.
Joe
Here is what ODIN says when applying TWRP 2.8.7.0
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> recovery.img
<ID:0/009> NAND Write Start!!
<ID:0/009> FAIL! (Auth)
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I am also having this same issue when trying to use CF autoroot and if I try to flash any custom recovery.

I have OG1 on my S5 and never had a problem with getting root. I used Odin3_v3.10.7 and used CF-Auto-Root-kltespr-kltespr-smg900p.tar.md5. TWRP works well but I used Philz. Try this order when rooting. Its seems to me its always something small that your missing.
Put your phone in download mode
activate odin and then plug in your phone to the usb.
click on the AP tab load the md file from cf auto root
make sure your comm port shows up and is blue, if all is right
click the start button and in 9 seconds you should be rooted and then follow up with twrp or Philz and you should be all set...

Suntar said:
I have OG1 on my S5 and never had a problem with getting root. I used Odin3_v3.10.7 and used CF-Auto-Root-kltespr-kltespr-smg900p.tar.md5. TWRP works well but I used Philz. Try this order when rooting. Its seems to me its always something small that your missing.
Put your phone in download mode
activate odin and then plug in your phone to the usb.
click on the AP tab load the md file from cf auto root
make sure your comm port shows up and is blue, if all is right
click the start button and in 9 seconds you should be rooted and then follow up with twrp or Philz and you should be all set...
Click to expand...
Click to collapse
OK tried using odin 3.10.7 and it still failed at the same exact point:crying:

Suntar said:
I have OG1 on my S5 and never had a problem with getting root. I used Odin3_v3.10.7 and used CF-Auto-Root-kltespr-kltespr-smg900p.tar.md5. TWRP works well but I used Philz. Try this order when rooting. Its seems to me its always something small that your missing.
Put your phone in download mode
activate odin and then plug in your phone to the usb.
click on the AP tab load the md file from cf auto root
make sure your comm port shows up and is blue, if all is right
click the start button and in 9 seconds you should be rooted and then follow up with twrp or Philz and you should be all set...
Click to expand...
Click to collapse
[email protected] said:
My Galaxy S5 (Sprint) updated to G900PVPU3BOG1 "OG1" firmware.
SInce then I can not root the phone with CF-Auto_root as usual. I tried TWRP (my fav), Clockworkmod, & philz touch. All give me a FAIL in ODIN.
I tried ODIN 3.10 and 3.09.
I also tried to flash custom ROMs with ODIN with similar FAIL in ODIN.
Now, I've flashed and rooted my S3 and S5 a number of times of different PCs without issues but nothing seems to work since I got OG1.
Is this a security issue with OG1? Am I missing something? I've exhausted all options I know of.
Joe
Here is what ODIN says when applying TWRP 2.8.7.0
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> recovery.img
<ID:0/009> NAND Write Start!!
<ID:0/009> FAIL! (Auth)
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
So after many many attepts and failures I saw a post that said that the problem that I was running into was that I had reactivation lock on. I shut off reactivation lock and my phone rooted and allowed me to install a custom recovery without any issue. Hopefully this helps others who are having this same problem

j3ffm1ll said:
So after many many attepts and failures I saw a post that said that the problem that I was running into was that I had reactivation lock on. I shut off reactivation lock and my phone rooted and allowed me to install a custom recovery without any issue. Hopefully this helps others who are having this same problem
Click to expand...
Click to collapse
That was it!! The reactivation lock option was checked.
Back to normal now, rooted, etc. Thanks!
https://youtu.be/1Vo_QFpSLhg

Glad you got rooted..

would this be the fix if i'm on OG1 update?

lifesgood88 said:
would this be the fix if i'm on OG1 update?
Click to expand...
Click to collapse
Just make sure that it is unchecked. Then you can flash a recovery with ODIN and then supersu if you want rooted stock.

can i change a recovery.img into a md5 file so i can flash it?

lifesgood88 said:
can i change a recovery.img into a md5 file so i can flash it?
Click to expand...
Click to collapse
Go here, https://www.androidfilehost.com/?w=files&flid=15340
Download either the first one on the page the KTsoonez TWRP or philz_touch_6.57.8-klte.tar. Turn off phone and reboot to download mode (power + home + vol down) . Open ODIN on the computer when the phone is in download mode. Connect phone to computer. ODIN should recognize it. Put recovery in PA slot and check auto reboot. Hit start and the recovery should flash in a few seconds. After it is finished, unplug phone and pull battery. turn on phone normally and let it boot. Download this file https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip and copy to phone SD. Turn off phone. Turn on phone to recovery power+vol up+home and Install Zip and select this file you just downloaded. Reboot. You are rooted.

So I'm trying to root my roommates S5 G900P/OG1 with Odin 3.10.7 and I cant disable the reactivation lock on it. It will let me put in his password then it goes back to the security page with the lock still on. Ive tried the factory reset workaround to no avail. Ive searched and searched. Does anyone have any ideas?

Help!! Sw rev check fail device 3 binary 2

I accidentally used 5.0.2 root on my 5.1.1 t-mobile s6 and it got the "RECOVERY IS NOT SEANDROID ENFORCING"
So I tried to re-root by using the 5.1.1 version and it still got the same error. Stupid, I know
I did some google search and I found out that I need to flash to stock firmware, so I tried.
And it have new problem: SW REV CHECK FAIL DEVICE 3 BINARY 2
Please help. I just got this phone for a month.
This is the log of ODIN (3.10)
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1005)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>

You should flash twrp recovery in order to get out of the bootloop. Google "Download TWRP for zeroflte", click on the first result, then download with the extension .tar so you can flash it in odin. Once downloaded, put your phone into download mode, connect it on computer, run odin and put the downloaded twrp recovery on AP. Flash it and the phone should finish booting up

CloseCoder said:
You should flash twrp recovery in order to get out of the bootloop. Google "Download TWRP for zeroflte", click on the first result, then download with the extension .tar so you can flash it in odin. Once downloaded, put your phone into download mode, connect it on computer, run odin and put the downloaded twrp recovery on AP. Flash it and the phone should finish booting up
Click to expand...
Click to collapse
It does not show the "RECOVERY IS NOT SEANDROID ENFORCING" anymore but it still stuck at the samsung logo
I tried to flash it back to stock android but still get the "Sw rev check fail device 3 binary 2"

sboot fail mean BOOTLOADER FAIL ....download latest firmware build for you device from sammobile and flash ...

PM me and I can send you the latest bootloader only, it will be updated to OI1 though
Sent from my SM-G920T

CloseCoder said:
You should flash twrp recovery in order to get out of the bootloop. Google "Download TWRP for zeroflte", click on the first result, then download with the extension .tar so you can flash it in odin. Once downloaded, put your phone into download mode, connect it on computer, run odin and put the downloaded twrp recovery on AP. Flash it and the phone should finish booting up
Click to expand...
Click to collapse
CloseCoder said:
PM me and I can send you the latest bootloader only, it will be updated to OI1 though
Sent from my SM-G920T
Click to expand...
Click to collapse
lummujaj said:
sboot fail mean BOOTLOADER FAIL ....download latest firmware build for you device from sammobile and flash ...
Click to expand...
Click to collapse
Thanks very much, I fix my phone by flashing TWRP and used ADB to transfer a custom rom over from my pc to the 6. I flashed the rom and it is working fine now.

help pls got the same problem
nguye205 said:
Thanks very much, I fix my phone by flashing TWRP and used ADB to transfer a custom rom over from my pc to the 6. I flashed the rom and it is working fine now.
Click to expand...
Click to collapse
I don't know how to to transfer a custom rom over from my pc using ADB.
I can go only into download mode and not recovery.
I tried flashing with odin TWRP and wasn't able to remove "RECOVERY IS NOT SEANDROID ENFORCING"" but after using a recovery "frecovery.tar.md5" it got removed , and now stuck at the loop can't turn it on and it will not go into recovery mode . PLSS help

BL
CloseCoder said:
PM me and I can send you the latest bootloader only, it will be updated to OI1 though
Sent from my SM-G920T
Click to expand...
Click to collapse
Could you plz email me the BL file? [email protected] . And im not sure if its firmware specific, can i flash the oi1 BL on oi6? and just to make sure are we talking the G920T model?

NotTheDroidsUrLooking4 said:
Could you plz email me the BL file? [email protected] . And im not sure if its firmware specific, can i flash the oi1 BL on oi6? and just to make sure are we talking the G920T model?
Click to expand...
Click to collapse
hi i have a s6 sm-g925i and not flash always same error sw rev check fail device 3 binary 2

sunnyce said:
I don't know how to to transfer a custom rom over from my pc using ADB.
I can go only into download mode and not recovery.
I tried flashing with odin TWRP and wasn't able to remove "RECOVERY IS NOT SEANDROID ENFORCING"" but after using a recovery "frecovery.tar.md5" it got removed , and now stuck at the loop can't turn it on and it will not go into recovery mode . PLSS help
Click to expand...
Click to collapse
Did you find a solution?! I have the exact same problem

nguye205 said:
And it have new problem: SW REV CHECK FAIL DEVICE 3 BINARY 2
Please help. I just got this phone for a month.
Click to expand...
Click to collapse
Did you fix it?
I guess I'm fixing it now. I tried to flash 4-file firmware separately.
First: I downloaded and installed this TWRP zeroflte
BUT you can begin with -
Second: I flashed ONLY BOOTLOADER of this 4-file service firmware I9500XXUFNB3 (Unfortunatelly I cannot write down outside links of this file, because of I'm new user and system didn't allow me, but you can Google it and download from 4pda).
Third: I flashed ONLY AP
Fourth: I flashed CP (Modem)
Fifth: Last one CSC
FIRST START!...

CloseCoder said:
PM me and I can send you the latest bootloader only, it will be updated to OI1 though
Sent from my SM-G920T
Click to expand...
Click to collapse
hope you can help but i have verixon s6 and its stuck also on bootloop w that binary device message ive wiped cache factory reset and everything ive tried flash stock firmware thur odin everything i try Failed odin mode on top of download mode and not sure what i can do to get it to boot up. i dont care about wiping it all since its new anyway.
any help greatly appreciated/

ToY9CiTo said:
hope you can help but i have verixon s6 and its stuck also on bootloop w that binary device message ive wiped cache factory reset and everything ive tried flash stock firmware thur odin everything i try Failed odin mode on top of download mode and not sure what i can do to get it to boot up. i dont care about wiping it all since its new anyway.
any help greatly appreciated/
Click to expand...
Click to collapse
Hello did u get this fixed ?
i am facing the same issue
i d really appreciate if u update ur solution here
thanks

After installing twrp my phone is not showing IMEI and baseband. So sim card also not working. Using custom rom but still the same.

faurionutz said:
Flash back stock rom, if still no imei or baseband you must repair imei and baseband, contact me if you need this
Click to expand...
Click to collapse
Now stock rom also not working. I have tried to install many roms which used to work fine before installing twrp now they are giving error. I managed to install just 1 rom but Network and baseband is empty. I have no clue.

Can u sant me the bootloader pls? [email protected]

Help
CloseCoder said:
PM me and I can send you the latest bootloader only, it will be updated to OI1 though
Sent from my SM-G920T
Click to expand...
Click to collapse
Can u plz send me the bootloader [email protected]

im getting the same problem i try to use twrp and flash and i get:
<ID:0/013> Odin engine v(ID:3.1101)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> SingleDownload.
<ID:0/013> recovery.img
<ID:0/013> NAND Write Start!!
<ID:0/013> RQT_CLOSE !!
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help phone is still very new

stonytony666 said:
im getting the same problem i try to use twrp and flash and i get:
<ID:0/013> Odin engine v(ID:3.1101)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> SingleDownload.
<ID:0/013> recovery.img
<ID:0/013> NAND Write Start!!
<ID:0/013> RQT_CLOSE !!
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help phone is still very new
Click to expand...
Click to collapse
Try this recovery mate

xfury94 said:
Try this recovery mate
Click to expand...
Click to collapse
this is what i get after trying your recovery:
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin engine v(ID:3.1101)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> SingleDownload.
<ID:0/013> recovery.img
<ID:0/013> NAND Write Start!!
<ID:0/013> RQT_CLOSE !!
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

[Solved]Briked S6. solution in the op

Thanks to Atntpt that opened my mind. I've unpacked .Tar odin package of 5.1.1 and flashed something like modem,boot and recovery (adding .tar in the file names before flash them) one per time, then a custom kernel and last twrp, and the phone stops to reboot. Samsung Switch done the rest of the work. Hi guys, please help me, i'm working no stop on my phone from yesterday without a solution. Yesterday i've tryed to flash mm(Coming from noblerom installed without tripping knox with modified bootloader of 5.0) from the post in general. Flash of mm has fail with an error of a bootloader. then i've tryed to flash latest stock rom(not of my country), and gave me an error in flashing hidden.img, i've tryed to flash in odin, seems fine and phone boots but have no charge. attacched to charger the phone boots and shut down after 5 seconds.
Both recovery and download mode, works
in official recovery and twrp can't mount system
in official says
failed to mount '/system (invalid argument
If you know something about, please help me.
Log of odin flash
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!

after hidden fails flash custom kernel via odin.. i should boot normaly..(will tip KNOX!!) that was the reason i tiped knok was unable to bypass that situation

Atntpt said:
after hidden fails flash custom kernel via odin.. i should boot normaly..(will tip KNOX!!) that was the reason i tiped knok was unable to bypass that situation
Click to expand...
Click to collapse
can you send me a link?

I'm glad I could help

Please help cannot flash Stock

So I messed up my s7 by flashing a wrong version of xposed and now I can't go back to stock.
Trying to flash it through Odin but I get a "sw rev check fail" message
Please help :'(

marcotics said:
So I messed up my s7 by flashing a wrong version of xposed and now I can't go back to stock.
Trying to flash it through Odin but I get a "sw rev check fail" message
Please help :'(
Click to expand...
Click to collapse
Are you sure you are flashing correct firmware and the latest version?

Yes, I'm trying to flash G930TUVS2APB8
Should I only do "AP"? Or try all four files?
What do I do in the CSC field? Load the CSC or HOME_CSC file?
Should I try the special Odin by PrinceComsy or 3.11?

This is what I get on Odin
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> skip file list for home binary
<ID:0/006> persist.img.ext4
<ID:0/006> Home Binary Download
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> emmc_appsboot.mbn
<ID:0/006> lksecapp.mbn
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
This is what shows up on Odin

Fixed the problem!!! thanks

What was the solution? I'm having this issue as well

Try going into recovery and factory reset(wipe data)

It got fixed by using my pc rather than my laptop (had same drivers installed so no idea)
Also downloaded the absolute latest firmware from sammobile and latest Odin
Hope you can fix your problem man.
Note: if it doesnt let you flash stock I read that it may be because you're trying to flash something older, by default you cannot downgrade on s7