Database Info

No 3colourscren

my prophet was working normaly and while i was installing a program it stoped. i formated it and reinstalled the windows but what happened is:
1-it doesnt recognize the memory card anymore
I thought it is rom problem , i tried to install anothere rom but THERE IS NO 3 colour screen but the prophet is working
please any body have idea about this problem reply .

have u done hardspl? try flashing another rom..

i tried hardspl but it didnt continue the process
while i was doing hardspl my prophet turnedoff
thank blusilv for reply

where is the help??????????????

Listen up
First off all charge the battery for 2 hours before doing this.
After turn on the device and press for 5 seconds the com button on the left side of the device.
You will enter the 3 colours loader.
Connect the device to the PC.
Step 2 Install the original Rom
Step 3 Do a Rom update use step 2 of pdamobiz Rom, select update rom file and wait.
Step 4 Do a hardspl G3 or G4 see your device to see witch one is it.
Step 5 install a new Rom with the RUU update utility G3 or G4.
Then you just have to wait the device to reboot and you can use it.
Note: Use the 2.19 radio Rom its the most stable, you can install it after installing the final Rom ok.
Any questions feel free ok bye.

i am sorry but i thought the three colour screen meens bootloader my problem now that i cant change this rom as it dont recognize the memory and also there is prblems with bluetooth.
thanx deltav but ineed more help

Listen up that procedure i explained would put the PDA working 100%, if you have the problems you say you do, its because you installed a rom inappropriate for you device. The memory and bluetooth problems come from bad radio rom and from roms that are not suitable for the device, you mad bad installations, that is the real origin for your problems, if you want to stay with your device with problems fine, in my opinion the best is to put the original rom in and after that, do the rest of procedure if you don´t want to this its up to its your device not mine.

i tried what you said deltav but the problem is there is no 3 color screen and i tried almost all tools of ubgrading and downgrading but i cant remove this rom from my prophet my prophet is G3.
thanks for help but more please

Hello,
Same problem here, no 3-color screen appears when I start or reset and press the comm button on the side.

help for me and seichi please

OK guys after beeing in bootloader mode do a g3 or g4 update with a new rom don´t forget to connect the usb cable correctly, see if it works, if it does not tell me what are your problems, bye.

drdisho said:
i tried what you said deltav but the problem is there is no 3 color screen and i tried almost all tools of ubgrading and downgrading but i cant remove this rom from my prophet my prophet is G3.
thanks for help but more please
Click to expand...
Click to collapse
Listen did you charge the device for 4 hours first on the electricity - step 1
Do a hard reset with the stylus on the device - step 2
press the left com button for 5 seconds on the device, before anything appears on screen - step3
If everything goes well the 3 colour screen will appear.

[Q] BIGGEST PROBLEM with samsung galaxy mini :/

I have a biggest problem , my phone (Samsung Galaxy Mini S5570) is old about 3 weeks, and I have unofficial android 2.3.4 GingerBread. I was trying install Cyanogen mod 7.1 .... and now I can´t turn on mobile, when I hold power, then all freeze. I can´t turn on Recovery mode, too. Home+Power Button... I don´t know why , When I hold home+power, then will be there a picture with mini mobile who is connected to mini PC, on black background, ... please help me , sorry about my english.

Flash your phone again with Odin, like you did the 1st time.

Yes, I was try it, but it´s working few seconds and then was flashing stopped - There is : Downloading MIBIB. And next time There was writed : Fail , :/

Bounce89 said:
Yes, I was try it, but it´s working few seconds and then was flashing stopped - There is : Downloading MIBIB. And next time There was writed : Fail , :/
Click to expand...
Click to collapse
You must use odin 4.38. I used odin 4.28 and the process just stop at MIBIB.

It´s Odin Multi Downloader 4.38 and stopped on MIBIB .. :/

Take it back to Samsung service center. don't tell them that you've flash your galaxy mini. Just tell them that the device suddenly unable to start.

sph21 said:
Take it back to Samsung service center. don't tell them that you've flash your galaxy mini. Just tell them that the device suddenly unable to start.
Click to expand...
Click to collapse
Thank You so much

this prob happen with me also i just change d usb wire n done
it was problem with my usb wire

I have a big big problem too
My galaxy mini "back" and "power" key stopped working. Is theres something to do with the battery? When i put my battery in my mini it turned on automatically. Always like that. Help me please??

bossmonggiko said:
My galaxy mini "back" and "power" key stopped working. Is theres something to do with the battery? When i put my battery in my mini it turned on automatically. Always like that. Help me please??
Click to expand...
Click to collapse
Remove the battery
Plug in a usb to the mobile, with the pc/laptop ON
Now insert the battery when phone is connected to the usb
After certain flickering(may or may not occur), phone will switch on automatically.
Both the keys will now work.

this is not samsung galaxy mini forum...you must post this in correct place

This thread is ancient and in the wrong section. Closed.

Rom installed wrong ?

I just installed official 4.2 android for htc one x.
after a few days it died . can't power it anymore.
I tried all the methods or powering a phone , belive me , all of them !
Did this happen because maybe , just maybe , the rom didn't install corectly ?
i went to a service and they told me they must "rewrite the boot"(i translated what they said , i'm from Romania)
what does that mean ?

hmmm......
Alaek12 said:
I just installed official 4.2 android for htc one x.
after a few days it died . can't power it anymore.
I tried all the methods or powering a phone , belive me , all of them !
Did this happen because maybe , just maybe , the rom didn't install corectly ?
i went to a service and they told me they must "rewrite the boot"(i translated what they said , i'm from Romania)
what does that mean ?
Click to expand...
Click to collapse
because ure device with a few days, why you dont bring the device to the service center. because iam afraid the phone physical defect. no offense just my opinion and i was experienced thats before with xmiro

Alaek12 said:
I just installed official 4.2 android for htc one x.
after a few days it died . can't power it anymore.
I tried all the methods or powering a phone , belive me , all of them !
Did this happen because maybe , just maybe , the rom didn't install corectly ?
i went to a service and they told me they must "rewrite the boot"(i translated what they said , i'm from Romania)
what does that mean ?
Click to expand...
Click to collapse
You haven't provided enough information. You need to tell us which phone you have, your bootloader details, exactly which ROM you installed, exactly which methods you tried to power it on. Saying "I've tried everything" pretty much means nothing here, we need all the details to be able to help you.
Sent from my Evita

Leave the phone plugged to the wall charger (not connected to a computer by USB) overnight, and try to power on again. Try both regular power on, and bootloader. Try these while the charger is connected (as well as not connected), also.
There is a known bug with the phone, where it can sometimes be difficult to power on after draining to shutdown. You may be experiencing this bug, rather than anything to do with the ROM install. Especially if you didn't experience any other bugs for a few days after the ROM flash, I would tend to think it is not the fault of the ROM.

[ROM][6.0] CyanogenMod 13.0 [ALPHA] [HARD BRICK FIX]

[ROM][6.0] CyanogenMod 13.0 [ALPHA] have bricked some XPERIA L devices. So this thread is to help those people who are facing the problem. I came across some methods to recover their Xperia L. Although, I am not sure it will work because I haven't tried it myself (Can't risk bricking my phone on purpose just to check this method which may or may not fix it ). But please go ahead and try it.
It's better to try than to cry!
Click to expand...
Click to collapse
METHOD 1
Remove Battery, press power button for around 10-12 seconds..then press and hold volume up, a Insert the battery , fash tft file using flastool
Source: https://www.youtube.com/watch?v=lycyxdkNlz8 (Comment by KãyRá S.s)
METHOD 2
Disconnect the phone from PC if connected Remove the battery Press and hold the power button for 15-20 seconds Re-insert battery Flash latest FW using flashtool..
Source: https://www.youtube.com/watch?v=lycyxdkNlz8 (Comment by BEST FULLAPPS)
If anyone know a better method or a suggestion please post it...

you can't fix in any way broken partition table, only with jtag and similiar, this all should work for semibricked devices...

Hard Brick......
Flashing_Expert said:
you can't fix in any way broken partition table, only with jtag and similiar, this all should work for semibricked devices...
Click to expand...
Click to collapse
Sir plz help me out i have bricked my device. When i connect it to a charger it shows a greenish light for a second and the it fades out. No detection my pc. It says that it is an unidentified device. actually it happened after i flashed cm13 by olivier. It booted up fine. I then just shut it down to install gapps. But it didnt respond any more.

udaykapoor97 said:
Sir plz help me out i have bricked my device. When i connect it to a charger it shows a greenish light for a second and the it fades out. No detection my pc. It says that it is an unidentified device. actually it happened after i flashed cm13 by olivier. It booted up fine. I then just shut it down to install gapps. But it didnt respond any more.
Click to expand...
Click to collapse
You had to install the latest package.. if u didn't only then u would've got hard bricked... cm13 is now tested by too many people and it runs without bugs.. so it may be the fault with the version of cm13 you used..

udaykapoor97 said:
Sir plz help me out i have bricked my device. When i connect it to a charger it shows a greenish light for a second and the it fades out. No detection my pc. It says that it is an unidentified device. actually it happened after i flashed cm13 by olivier. It booted up fine. I then just shut it down to install gapps. But it didnt respond any more.
Click to expand...
Click to collapse
oh damn another one guy same happened to me with same rom ...
sorry but this means your phone is dead like mine, your bootloader is corrupted so device is unable to boot to kernel nor to system
no flashmode or fastboot mode, you can see it only in device manager (with proper drivers) as qhusb dload 9008
sadly we don't have proper files for QPST software so nobody unbricked his XL to this date
only chance is motherboard replacement

udaykapoor97 said:
Sir plz help me out i have bricked my device. When i connect it to a charger it shows a greenish light for a second and the it fades out. No detection my pc. It says that it is an unidentified device. actually it happened after i flashed cm13 by olivier. It booted up fine. I then just shut it down to install gapps. But it didnt respond any more.
Click to expand...
Click to collapse
btw you had 2 partitions on your microsd? I need to know...

Hi, is it possible to have some more information on the situations with cm13 that have caused a hard-brick? I understood that that the features such as link2sd and app2sd are potentially dangerous? Is this understanding correct? If yes, could you please explain why and under which circumstances this could create troubles?
Do you have any further suggestions on what to avoid?
Many thanks in advance for your expert advice.
I wanted to try cm13 on my spare xperia l, but would like to avoid a hard brick...
Cheers,
Hennng

xleng said:
Hi, is it possible to have some more information on the situations with cm13 that have caused a hard-brick? I understood that that the features such as link2sd and app2sd are potentially dangerous? Is this understanding correct? If yes, could you please explain why and under which circumstances this could create troubles?
Do you have any further suggestions on what to avoid?
Many thanks in advance for your expert advice.
I wanted to try cm13 on my spare xperia l, but would like to avoid a hard brick...
Cheers,
Hennng
Click to expand...
Click to collapse
Its already been fixed in newer builds, also, the developer has stopped the development. But you can surely use CM13 Based ROMs since they also have better editing options.

I really cant wait for cm13. It really pleases me If rom get fixes

lumia 640 lte recovery rom bin files

Short im looking for lumia 640 lte EFIESP.bin MAINOS.BIN DATA.BIN for flash my lumia whit wpinternals i hope i get any (cant use my sim card for calls all time flight mode and cant check *#06# for imei pls help
hello , i have lumia 640 lte and i use other stuff long time ago to update windows 10 it was runing all thing working. last weekend i turn it on to my laptop and it becomes to update for windows 11 i lost all my data recovery for lumia 640 lte RM-1072 RM1072_02177.00000.15221.30005_RETAIL_prod_signed_1022_026134_ORG-PL.ffu
i did every thing i get in internet google and other and my phone is all time un flight mode cant turn it off no matter what i do i try all oficial and unoficial windows 8.1 and 10 ffu all time flight mode and cant even check my imei doing *#06# wifi working gps also i download here maps and are working . i done many flashes and other untill screen go black and game over . yesterday i turn my lumia whithout batery to windows recovery and i get download emergency file for RM 1113 ! (my RM 1072 ) and phone wakes up to flash mode ,done flash whit oficial recovery and it turn again on flight mode all time . found Yours wpinternals and used google drive flash EFIESP.bin MAINOS.BIN DATA.BIN . again my phone get crashed and back to live whit no battery in recovery .

What is happening on your phone ? Qualcomm mode or flash mode ?

Hi its qualcomm its dead black screen all time disconect and conect after vibration add and disconect vibration again conect when not on cable its vibration after 15 sec again and again . When i use recovery tool it find phone and cant emergency rescue i think motherboard is crashed . I think its wasted time for that old phone no new programs available for anything to do whit it cant go to power vol + or vol - mode i was in shop they laught at me becouse windows phone is dead years ago and no one repair its if you have any idea or software let me know i try whatever .

januszex said:
Hi its qualcomm its dead black screen all time disconect and conect after vibration add and disconect vibration again conect when not on cable its vibration after 15 sec again and again . When i use recovery tool it find phone and cant emergency rescue i think motherboard is crashed . I think its wasted time for that old phone no new programs available for anything to do whit it cant go to power vol + or vol - mode i was in shop they laught at me becouse windows phone is dead years ago and no one repair its if you have any idea or software let me know i try whatever .
Click to expand...
Click to collapse
this is my discord: phongvngg#6537, i need more,i think that can back to life

januszex said:
Hi its qualcomm its dead black screen all time disconect and conect after vibration add and disconect vibration again conect when not on cable its vibration after 15 sec again and again . When i use recovery tool it find phone and cant emergency rescue i think motherboard is crashed . I think its wasted time for that old phone no new programs available for anything to do whit it cant go to power vol + or vol - mode i was in shop they laught at me becouse windows phone is dead years ago and no one repair its if you have any idea or software let me know i try whatever .
Click to expand...
Click to collapse
XD sr, i can chat with u faster, u was waited for me 2 days

Angielski
thank you for your willingness and trying to help but the phone is in repair probably dismantled to parts of the motherboard damaged, today Saturday with me no longer work I will find out on Monday what exactly. Thank you for your time I remove the thread and account on xda because I currently have a Nokia 6300 and I do not need a better Best regards