I have a biggest problem , my phone (Samsung Galaxy Mini S5570) is old about 3 weeks, and I have unofficial android 2.3.4 GingerBread. I was trying install Cyanogen mod 7.1 .... and now I can´t turn on mobile, when I hold power, then all freeze. I can´t turn on Recovery mode, too. Home+Power Button... I don´t know why , When I hold home+power, then will be there a picture with mini mobile who is connected to mini PC, on black background, ... please help me , sorry about my english.
Flash your phone again with Odin, like you did the 1st time.
Yes, I was try it, but it´s working few seconds and then was flashing stopped - There is : Downloading MIBIB. And next time There was writed : Fail , :/
Bounce89 said:
Yes, I was try it, but it´s working few seconds and then was flashing stopped - There is : Downloading MIBIB. And next time There was writed : Fail , :/
Click to expand...
Click to collapse
You must use odin 4.38. I used odin 4.28 and the process just stop at MIBIB.
It´s Odin Multi Downloader 4.38 and stopped on MIBIB .. :/
Take it back to Samsung service center. don't tell them that you've flash your galaxy mini. Just tell them that the device suddenly unable to start.
sph21 said:
Take it back to Samsung service center. don't tell them that you've flash your galaxy mini. Just tell them that the device suddenly unable to start.
Click to expand...
Click to collapse
Thank You so much
this prob happen with me also i just change d usb wire n done
it was problem with my usb wire
I have a big big problem too
My galaxy mini "back" and "power" key stopped working. Is theres something to do with the battery? When i put my battery in my mini it turned on automatically. Always like that. Help me please??
bossmonggiko said:
My galaxy mini "back" and "power" key stopped working. Is theres something to do with the battery? When i put my battery in my mini it turned on automatically. Always like that. Help me please??
Click to expand...
Click to collapse
Remove the battery
Plug in a usb to the mobile, with the pc/laptop ON
Now insert the battery when phone is connected to the usb
After certain flickering(may or may not occur), phone will switch on automatically.
Both the keys will now work.
this is not samsung galaxy mini forum...you must post this in correct place
This thread is ancient and in the wrong section. Closed.
Related
hi guys...please (like title says) i have a problem while trying to upgrade optimus one to 2.3. ... when it starts updating(not DOWNLOADING the update) it blocks to 4% and the display shows : Emergency mode...and after 5 mins the program says that is a problem with the connection Phone-PC or PC-phone....and said that i must unplug the USB cable and battery...i've done that and...same problem....someone can help me?(pLease)...what can i do? (sorry if i have a bad english )
Anyone?Please!!!!
I can't even download it... the loading animation keeps spinning and spinning :\
Wrong thread, sorry.
Plesk is complicated in my opinion, it's not newbie friendly and a generic webmaster is not familiar with its interface.
MoKaA said:
hi guys...please (like title says) i have a problem while trying to upgrade optimus one to 2.3. ... when it starts updating(not DOWNLOADING the update) it blocks to 4% and the display shows : Emergency mode...and after 5 mins the program says that is a problem with the connection Phone-PC or PC-phone....and said that i must unplug the USB cable and battery...i've done that and...same problem....someone can help me?(pLease)...what can i do? (sorry if i have a bad english )
Click to expand...
Click to collapse
You using LG pcsuite to update the rom ? You can use Kdz, or the russian tool for flashing the official gingerbread.
check your phone specific forum for further information.
http://forum.xda-developers.com/forumdisplay.php?f=836
I'm not touching that KDZ crap, the instructions I saw said you had to disable the LG Virtual Device on the system hardware config or your phone would get immediately bricked. Also said you should exit all programs and so on, didn't make me comfortable at all, seemed like anything could go wrong at any second.
MoKaA said:
hi guys...please (like title says) i have a problem while trying to upgrade optimus one to 2.3. ... when it starts updating(not DOWNLOADING the update) it blocks to 4% and the display shows : Emergency mode...and after 5 mins the program says that is a problem with the connection Phone-PC or PC-phone....and said that i must unplug the USB cable and battery...i've done that and...same problem....someone can help me?(pLease)...what can i do? (sorry if i have a bad english )
Click to expand...
Click to collapse
Hi, I had same problem too and try some other procedures, but finally works this:
1) uninstal all LG drivers and applications
2) install LG update tool (LG Mobile Update from LG website) and USB drivers (download via that tool, C:\LGP500\USB_Driver\LGUnitedMobileDriver_....)
3) remove SD card from phone
4) upgrade via LG Mobile Update
5) my phone frozen on adroid logo so I must hard-reset phone (HOME - SEARCH - VOLUME+ until Androidman shows). First phone load after 2-3 minutest so try wait before hard-reset
I read other forums and I think that SD card was problem.
Complete instructions (in czech) goo.gl/MYuO9
MoKaA said:
hi guys...please (like title says) i have a problem while trying to upgrade optimus one to 2.3. ... when it starts updating(not DOWNLOADING the update) it blocks to 4% and the display shows : Emergency mode...and after 5 mins the program says that is a problem with the connection Phone-PC or PC-phone....and said that i must unplug the USB cable and battery...i've done that and...same problem....someone can help me?(pLease)...what can i do? (sorry if i have a bad english )
Click to expand...
Click to collapse
I updated my P500 10 minutes ago.It was rooted,with a custom kernel from mik_os(many thanks to that mate).I installed LG PC Suite IV from my phone,and updated it(the suite,not the phone).After that,I updated the phone.It got stuck in Emergency Mode!! for 15 minutes,and then it rebooted.It took 2 minutes for it to fully load,I had lost some application data but everything else looked intact.
Try reinstalling all the programs involved in this procedure.I hope this helps.
Same problem here ...
Did you solved this problem ?
Tell us how !
Same problem here !
:crying:
Dear Helpers
Please someone help me!
I was upgrading my phone and suddenly it stopped at 69%.
After that it asked me it if I want to make emergency upgrade, I tried it but unfortunately it didn’t work.
Now my phone is not starting at all, it just gives the logo of samsung and the model type. I tried to make a hard reset by click the buttons but it didn’t work.
It seems that the software is removed and no more software in the phone.
What shall I do ? Please advice!
Thanks in advanced!
Well Bro it seems to like you had been bricked your phone
In this Forum You can find Way to unbrick your mobile
it may need to install new rom then it will be normal
http://http://forum.xda-developers.com/forumdisplay.php?f=656
http://forum.xda-developers.com/showthread.php?t=984140&highlight=unbrick
I think this would help you if so please click on Thank You Button
tablooj said:
Dear Helpers
Please someone help me!
I was upgrading my phone and suddenly it stopped at 69%.
After that it asked me it if I want to make emergency upgrade, I tried it but unfortunately it didn’t work.
Now my phone is not starting at all, it just gives the logo of samsung and the model type. I tried to make a hard reset by click the buttons but it didn’t work.
It seems that the software is removed and no more software in the phone.
What shall I do ? Please advice!
Thanks in advanced!
Click to expand...
Click to collapse
u had atleast 70% battery?
tablooj said:
Dear Helpers
Please someone help me!
I was upgrading my phone and suddenly it stopped at 69%.
After that it asked me it if I want to make emergency upgrade, I tried it but unfortunately it didn’t work.
Now my phone is not starting at all, it just gives the logo of samsung and the model type. I tried to make a hard reset by click the buttons but it didn’t work.
It seems that the software is removed and no more software in the phone.
What shall I do ? Please advice!
Thanks in advanced!
Click to expand...
Click to collapse
sound like u just killed ur phone try using adb to mannually install all software( im used to htc idk if applys to samsung)
adb flash flash your_rom.zip
do this in fastbootusb mode(bootloader)
i had the same problem
Did you fix it?
Sent from my GT-I9000 using xda premium
I need a Professional Answer to a Beginner user
tablooj said:
Dear Helpers
Please someone help me!
I was upgrading my phone and suddenly it stopped at 69%.
After that it asked me it if I want to make emergency upgrade, I tried it but unfortunately it didn’t work.
Now my phone is not starting at all, it just gives the logo of samsung and the model type. I tried to make a hard reset by click the buttons but it didn’t work.
It seems that the software is removed and no more software in the phone.
What shall I do ? Please advice!
Thanks in advanced!
Click to expand...
Click to collapse
Hello again;
Thanks for the fast responds but ...
I need a Professional Answer to a Beginner user.
I want to know how to fix my phone step by step from a to z
for example which applications i need to install on my computer to fix my phone etc.
anyone has patience to explain to me briefly?
well, at first you need odin
google odin android or sth like that and google odin pit file 512.
go to sammobile and look for the firmware you want to have (you need to register on sammobile.com to do this)
after that, make sure you have samsung kies installed, but NOT running (check via taskmanager-processes, if you see something with 'kies' in it, close that).
run odin
use pit file s1_odin_20100512.pit in pit tab
use CODE file in PDA tab
use MODEM file in PHONE tab
use GT-I9000-CSC... file in CSC tab
make sure the repartition box, auto reboot box, f.reset time box are checked (dump, phone efs clear, phone bootloader update NOT)
set your phone to download mode (hold volume down, home button an on/off button at the same time until the android with a shovel appears)
plug your phone via usb in to your computer, in odin should appear a yellow sign at ID:COM
hit start in odin
wait til its done
(i hope this works out, thats what i did, when i bricked my phone once)
i dont take responsibilty for damages on your phone!
you do this at your own risk!
ps: sorry for my bad english..
http://forum.xda-developers.com/showthread.php?t=1139050
Hi All,
Need urgent help!!
I am new to Android Upgrade.. I am using Galaxy 3 gt-i5801. 2 days before when i connected my phone to laptop using samsung kies, it showed me that there is an upgrade available( froyo). I just thought of going for next android version and proceeded for the upgrade.. it went on well but my bad luck just before it completed, my laptop internet got disconnected and even after connecting internet it didnt proceed but failed..
soon after that, my Kies showed me the recovery console and i gave for recovery.. that too failed since my mobile was showing samsung logo but not the download mode..
so i just disconnected my phone and switched it off... now i am not able to boot my phone at all.,.
i tried all combinations like.., vol up,down,home,power etc.. nothing is working..
is this phone dead? as i can see in other threads that samsung service center guys will replace mother board n take 3000+ Rs for the same??
pls help me.. i dont want to spend so much for this now..! plss help me..
Thanks in advance!!
szpt9m said:
Hi All,
Need urgent help!!
I am new to Android Upgrade.. I am using Galaxy 3 gt-i5801. 2 days before when i connected my phone to laptop using samsung kies, it showed me that there is an upgrade available( froyo). I just thought of going for next android version and proceeded for the upgrade.. it went on well but my bad luck just before it completed, my laptop internet got disconnected and even after connecting internet it didnt proceed but failed..
soon after that, my Kies showed me the recovery console and i gave for recovery.. that too failed since my mobile was showing samsung logo but not the download mode..
so i just disconnected my phone and switched it off... now i am not able to boot my phone at all.,.
i tried all combinations like.., vol up,down,home,power etc.. nothing is working..
is this phone dead? as i can see in other threads that samsung service center guys will replace mother board n take 3000+ Rs for the same??
pls help me.. i dont want to spend so much for this now..! plss help me..
Thanks in advance!!
Click to expand...
Click to collapse
No ans even after one day
pls help me freinds !!
is there any way i can flash this using memory card?? my cell is not booting up at all
Does ur phone even shows the samsung logo?
No nothing.. i tried all the combinations but is not showing anything..
Maybe it hard bricked.
Try flashing stock rom manually via odin.
Do a google search for it.
Edit: connect ur phone to a pc without battery and try the button combos see if the pc detects ur phone.
Shreyash007 said:
Maybe it hard bricked.
Try flashing stock rom manually via odin.
Do a google search for it.
Edit: connect ur phone to a pc without battery and try the button combos see if the pc detects ur phone.
Click to expand...
Click to collapse
Tried by removing battery no luck
also searched google for flashing stock rom manually via odin.
the links which i got was explaining abt going to download mode and flashing it.. i cant go to download mode
Same Problem...
Same Problem here ... :crying:
After testing CyanogenMod 7.2 I flashed back to GT-I5800_XXJPU_XXJP4_OXXJPO_multi_xxx.7z via ODIN but after reboot I cannot switch on my I5800.
But maybe it's a hardware problem: About a week ago a line of (black) dead pixels appeared across the screen. :crying:
S-p-i-r-i-t said:
Same Problem here ... :crying:
After testing CyanogenMod 7.2 I flashed back to GT-I5800_XXJPU_XXJP4_OXXJPO_multi_xxx.7z via ODIN but after reboot I cannot switch on my I5800.
But maybe it's a hardware problem: About a week ago a line of (black) dead pixels appeared across the screen. :crying:
Click to expand...
Click to collapse
so no other way other than going to service center?
Well, i think u will be requiring a usb jig.Its a device which forces a samsung device into download mode even if its bricked.You can buy one online.
This is much cheaper than a new motherboard.Hopes it works.
Shreyash007 said:
Well, i think u will be requiring a usb jig.Its a device which forces a samsung device into download mode even if its bricked.You can buy one online.
This is much cheaper than a new motherboard.Hopes it works.
Click to expand...
Click to collapse
where can i buy this? could you pls give me the link if you can?
edit:
I can see below lines in usbjig.com
Code:
If your phone screen is always black, turn it on and if it stays completely black, then sorry, but NO USB jig will help you.
well if that's true then you have to go for replacing ur motherboard.
but still if you wanna try you can buy one on ebay.
Shreyash007 said:
well if that's true then you have to go for replacing ur motherboard.
but still if you wanna try you can buy one on ebay.
Click to expand...
Click to collapse
can i get that in ebay india?? i searched it and can see usb jigs for galaxy s2 but not for i5801 can u give me the link if you dont mind!
its available on ebay india.
i think that the one for s2 will work for galaxy 3 because they have similar micro usb socket.
Shreyash007 said:
its available on ebay india.
i think that the one for s2 will work for galaxy 3 because they have similar micro usb socket.
Click to expand...
Click to collapse
ok let me check that then
Hi everyone!
A friend of mine found a samsung wave 2. Because it was locked with a password i tried to flash new firmware on it with multiloader.
It gave an error and now i can't get into download mode anymore, it appears on the screen for half a second and then the phone reboots.
I also can't charge it anymore because if i plug it in, the empty battery appears, and the phone reboots after 15 seconds. It doesn't seem to charge and i guess that's why i cant stay in download mode. Also it gets quite hot while charging...
Any ideas how to fix this? I've found numerous topics spread across the internet but none give a real solution :s
Thanks in advance.
Flash a stock firmware using Odin. That should help.
Press thanks if I've helped you
Sent from my GT-P5110 using XDA Premium HD app
No you didnt help, but i managed to charge the battery by wiring it to my galaxy s2, quite dangerous imo
but i succeeded and managed to get into download mode without rebooting, SOLVED
Bricked samsung waves s8530
I have samsung wave s8530... I had tried to flash the same using the turko Cfw version 9,but could not do it correctly... Now the phone is not switching on. And also not going into download mode... Wat should I do plz help
bango7886 said:
I have samsung wave s8530... I had tried to flash the same using the turko Cfw version 9,but could not do it correctly... Now the phone is not switching on. And also not going into download mode... Wat should I do plz help
Click to expand...
Click to collapse
So... Looks like it's hard bricked ... So ... just go to an Authorised service centre, and Play Dumb. Just tell that suddenly your phone wouldn't turn on and that you donno what happened (don't tell about rooting or anything) .... So, depending on how well you acted and how dumb the service centre people are, you 'may' get a replacement under warranty ..
ndmicH perfectly
niranjan94 said:
So... Looks like it's hard bricked ... So ... just go to an Authorised service centre, and Play Dumb. Just tell that suddenly your phone wouldn't turn on and that you donno what happened (don't tell about rooting or anything) .... So, depending on how well you acted and how dumb the service centre people are, you 'may' get a replacement under warranty ..
Click to expand...
Click to collapse
Thanks for the advise.... But is there a way I can myself unbrick the moblie?
bango7886 said:
Thanks for the advise.... But is there a way I can myself unbrick the moblie?
Click to expand...
Click to collapse
No ... i don't think so ... SInce you can't even turn on the phone ... the answer is No ... sorry ...
works condya
Thanks dude.... Tried to flash it once again.... 100% success...
Hhahahaha epic! i fixed it
I used the battery of my galaxy s2 (which has 1 more connection pin and a is lot larger) with some super technical skills and managed to flash a new rom and it worked!
Hi everyone ! I am new to forum, so please forgive me if I post into the wrong category .
I have a very big problem with my phone (LG L3 Optimus E400) . I have installed a lot of custom roms on it and yesterday I realized that the current rom I was using doesn't receive text messages so I decided to try antoher one and I had the "great" idea to Flash v20 Baseband for flashing SlimBeane610 rom. That was very silly. After I flashed the rom, I rebooted my phone and nothing happened, screen is black all the time. When I press the power button the phone vibrates and the back and menu buttons lights up for 1 second like normal log on, then boom, all goes black again and if I don't remove the battery and I press the power button or any combination (like Reset, Emergency mode) doesn't work. I googled everything, I found something on this forum but not very useful. I tried wit adb but my phone isn't on so it can't be recognized. I tried wit KDZ Updater (until the phone was recognized) but I get a error like WParam: 100 and LParam: 500. When I connect it with USB sounds are playing like normal and Mobogenie wants to connect with it but I can't enable USB Debugging so it's pissing me off . If I can enable USB Debuggins from PC somehow, maybe I can connect phone with Mobogenie and make a restore , a backup or flash another rom, it would be easy If I can go into recovery or emergency mode but I can't . If it would exist a software that can erase everything on the phone when the it's turned off ... .I tried with LG TOOLS, LG PC SUITE IV, LG FLASH TOOLS, Android MULTI TOOLS and nothing(i have the latest drivers installed). Can I make something to it using the external_sd (like put a flash into it, connect it through PC via USB cable and try to flash a rom from command prompt but I don't know the paths). This is a very hard problem, I have a bricked L3 and I don't know hot to unbrick, I think isn't only a soft problem, maybe I should do something with its hardware ? If anyone could help I would really appreciate .
Thanks in advance !
PS : I won't be able to follow this conversation until the next week because I am going to "Primitive Age" right now...oh God, I'm only good to smash things . :crying:
PodGom said:
The most important thing is, can you see the LG logo that shows up in normal boot? If you don't, it'd be either a screen problem or a hard brick. Nobody except LG can fix these problems, and you would have to pay LG some money to fix the phone. But if you DO see the LG logo and your phone stops, you can try the below options.
It just may be bricked, and you could try getting into recovery and flash an alternative ROM. But if that doesn't work, tryLG mobile support tools to get it back to its stock firmware. Good Luck!
Click to expand...
Click to collapse
No, I can't see the LG logo . If I could saw the LG screen was very easy to fix it. I think the phone it's really dead and I also think that even an authorized service can't fix it . Do you know an approximately price for fixing this issue ? Thanks .
Hi,
You should definitely ask the experts who own your device for help, Here...
http://forum.xda-developers.com/optimus-l3-l5-l7/help
Good luck!
Thank you. Thread closed.