hi guys...please (like title says) i have a problem while trying to upgrade optimus one to 2.3. ... when it starts updating(not DOWNLOADING the update) it blocks to 4% and the display shows : Emergency mode...and after 5 mins the program says that is a problem with the connection Phone-PC or PC-phone....and said that i must unplug the USB cable and battery...i've done that and...same problem....someone can help me?(pLease)...what can i do? (sorry if i have a bad english )
Anyone?Please!!!!
I can't even download it... the loading animation keeps spinning and spinning :\
Wrong thread, sorry.
Plesk is complicated in my opinion, it's not newbie friendly and a generic webmaster is not familiar with its interface.
MoKaA said:
hi guys...please (like title says) i have a problem while trying to upgrade optimus one to 2.3. ... when it starts updating(not DOWNLOADING the update) it blocks to 4% and the display shows : Emergency mode...and after 5 mins the program says that is a problem with the connection Phone-PC or PC-phone....and said that i must unplug the USB cable and battery...i've done that and...same problem....someone can help me?(pLease)...what can i do? (sorry if i have a bad english )
Click to expand...
Click to collapse
You using LG pcsuite to update the rom ? You can use Kdz, or the russian tool for flashing the official gingerbread.
check your phone specific forum for further information.
http://forum.xda-developers.com/forumdisplay.php?f=836
I'm not touching that KDZ crap, the instructions I saw said you had to disable the LG Virtual Device on the system hardware config or your phone would get immediately bricked. Also said you should exit all programs and so on, didn't make me comfortable at all, seemed like anything could go wrong at any second.
MoKaA said:
hi guys...please (like title says) i have a problem while trying to upgrade optimus one to 2.3. ... when it starts updating(not DOWNLOADING the update) it blocks to 4% and the display shows : Emergency mode...and after 5 mins the program says that is a problem with the connection Phone-PC or PC-phone....and said that i must unplug the USB cable and battery...i've done that and...same problem....someone can help me?(pLease)...what can i do? (sorry if i have a bad english )
Click to expand...
Click to collapse
Hi, I had same problem too and try some other procedures, but finally works this:
1) uninstal all LG drivers and applications
2) install LG update tool (LG Mobile Update from LG website) and USB drivers (download via that tool, C:\LGP500\USB_Driver\LGUnitedMobileDriver_....)
3) remove SD card from phone
4) upgrade via LG Mobile Update
5) my phone frozen on adroid logo so I must hard-reset phone (HOME - SEARCH - VOLUME+ until Androidman shows). First phone load after 2-3 minutest so try wait before hard-reset
I read other forums and I think that SD card was problem.
Complete instructions (in czech) goo.gl/MYuO9
MoKaA said:
hi guys...please (like title says) i have a problem while trying to upgrade optimus one to 2.3. ... when it starts updating(not DOWNLOADING the update) it blocks to 4% and the display shows : Emergency mode...and after 5 mins the program says that is a problem with the connection Phone-PC or PC-phone....and said that i must unplug the USB cable and battery...i've done that and...same problem....someone can help me?(pLease)...what can i do? (sorry if i have a bad english )
Click to expand...
Click to collapse
I updated my P500 10 minutes ago.It was rooted,with a custom kernel from mik_os(many thanks to that mate).I installed LG PC Suite IV from my phone,and updated it(the suite,not the phone).After that,I updated the phone.It got stuck in Emergency Mode!! for 15 minutes,and then it rebooted.It took 2 minutes for it to fully load,I had lost some application data but everything else looked intact.
Try reinstalling all the programs involved in this procedure.I hope this helps.
Same problem here ...
Did you solved this problem ?
Tell us how !
Same problem here !
:crying:
Related
hello every one i tried to update my g2x stock , to the 2.3 and when i did it with he lg update tool, it went through the process and i havd to reboot my phone , and then it just got stuck on the S/W and nothing happened i left it for hours , but nothing , so i came to the xda forum and i start reading , and i kept trying the KDZ_FW_UPD_EN.7z, with the kdz file but nothing , it kept on failing , so i spoke to tech support they told me its back order , so they transferred me to lg and they told me i have to send it in i also tried a hard reset but still nothing , same S/w issue , is this mean the phone is brick
Just wondering.. what % did you get stuck at with the LG update tool?
Mines got stuck at 4% because I didnt have the LGUSBModemDriver_WHQL_Eng_Ver_4.8.1 install. So it prompt to do so, and click Refresh.
If you have no luck with the LG update tool, maybe try reflash the NVFlash and do a restore?
I'm running Windows 7 64bit btw.. and after I downloaded and installed that driver.. it only took me 5min to install the update...
740man - did you follow this guy's instructions? I skipped #2 and #4 and it worked great for me (on XP).
http://forum.xda-developers.com/showthread.php?p=15878353#post15878353
Mine quit on 5% BTW. That tool is terrible.
yes i tried the last step , even in windows xp it was just failing i left it for hours , and it just would not wanna reboot , i followed the instructions step by step i get all the way till it tells you to disconnect and remove the battery then press restart , i been working on it since 8 this morning , i been using the lg update tool but when that failed i tried the method above and still same issue , it just wouldn't go pass the s/w , i think there going to send me refurbish one , cheap [email protected]#%$%s
http://forum.xda-developers.com/showthread.php?t=1179533&page=23
I was having same issue and this is how I solved it! Check link! Post 222.
....
i hope i wont get a refurbish phone , what are the chances of getting one any ways , any one know
Hello! Anyone could help me, please? I have done everything I can already and I couldn't fix my problem...
My cellphone is a LG Optimus L7 (P705 model)
1) I tried to update the firmware by KDZ program and the operation stopped in the middle of the process, so my phone is stopped in "EMERGENCY MODE", a yellow screen.
2) I tried again and again, but the program stops and it never lets me complete the process. The version of my firmware was V10e, I downloaded any types of Firmwares, but i cant update it anyway.
3) The recovery mode and hard reset option is off in my phone, so, i can't make the phone back to normal by this way, only by the flash/updating mode.
4) I tried to update by Lg Smar tool, but when the ROM download, the program stops and stops working.
5) I already tried to make the same process by another computer, but it happens the same thing is happening in mine.
Currently my phone is broke and locked in this screen "EMERGENCY MODE" and i cant even turn it on.
Anyone know any way to make my celphone back to turn on?
HELP ME!
Sorry, my english isn't so good.
Hi everyone ! I am new to forum, so please forgive me if I post into the wrong category .
I have a very big problem with my phone (LG L3 Optimus E400) . I have installed a lot of custom roms on it and yesterday I realized that the current rom I was using doesn't receive text messages so I decided to try antoher one and I had the "great" idea to Flash v20 Baseband for flashing SlimBeane610 rom. That was very silly. After I flashed the rom, I rebooted my phone and nothing happened, screen is black all the time. When I press the power button the phone vibrates and the back and menu buttons lights up for 1 second like normal log on, then boom, all goes black again and if I don't remove the battery and I press the power button or any combination (like Reset, Emergency mode) doesn't work. I googled everything, I found something on this forum but not very useful. I tried wit adb but my phone isn't on so it can't be recognized. I tried wit KDZ Updater (until the phone was recognized) but I get a error like WParam: 100 and LParam: 500. When I connect it with USB sounds are playing like normal and Mobogenie wants to connect with it but I can't enable USB Debugging so it's pissing me off . If I can enable USB Debuggins from PC somehow, maybe I can connect phone with Mobogenie and make a restore , a backup or flash another rom, it would be easy If I can go into recovery or emergency mode but I can't . If it would exist a software that can erase everything on the phone when the it's turned off ... .I tried with LG TOOLS, LG PC SUITE IV, LG FLASH TOOLS, Android MULTI TOOLS and nothing(i have the latest drivers installed). Can I make something to it using the external_sd (like put a flash into it, connect it through PC via USB cable and try to flash a rom from command prompt but I don't know the paths). This is a very hard problem, I have a bricked L3 and I don't know hot to unbrick, I think isn't only a soft problem, maybe I should do something with its hardware ? If anyone could help I would really appreciate .
Thanks in advance !
PS : I won't be able to follow this conversation until the next week because I am going to "Primitive Age" right now...oh God, I'm only good to smash things . :crying:
PodGom said:
The most important thing is, can you see the LG logo that shows up in normal boot? If you don't, it'd be either a screen problem or a hard brick. Nobody except LG can fix these problems, and you would have to pay LG some money to fix the phone. But if you DO see the LG logo and your phone stops, you can try the below options.
It just may be bricked, and you could try getting into recovery and flash an alternative ROM. But if that doesn't work, tryLG mobile support tools to get it back to its stock firmware. Good Luck!
Click to expand...
Click to collapse
No, I can't see the LG logo . If I could saw the LG screen was very easy to fix it. I think the phone it's really dead and I also think that even an authorized service can't fix it . Do you know an approximately price for fixing this issue ? Thanks .
Hi,
You should definitely ask the experts who own your device for help, Here...
http://forum.xda-developers.com/optimus-l3-l5-l7/help
Good luck!
Thank you. Thread closed.
Hi everyone.
First sorry my poor english.
Yesterday I received a phone (LG L4 II E467F Dual SIM) from a customer, the unit was but connecting the loading stopped with the LG logo and stand on this screen. I tried to upgrade the PC Suite, the cell was placed in download mode and the update is performed by the software, download and recording was carried out on the device during the recording process progress was up to 94% with the power on, when he got 95% the device was turned off automatically (A device's battery was at about 70% during the process), then the process has reached 100% normally without error messages.
After this the phone turned a brick, does not care, does not vibrate, does not go into download mode, finally does nothing. But noticed that it was shown in Windows Device list without driver. I used a software to install drivers and the device driver has been installed and he was recognized as "USB Port MTK (COM5)."
I watched a few topics about it, but could not properly understand the procedure and I was afraid to end any device recovery chance.
http://forum.xda-developers.com/showthread.php?t=1943442
http://forum.xda-developers.com/showthread.php?t=2160490
http://forum.xda-developers.com/showthread.php?t=1943442&page=91
https://www.youtube.com/watch?v=TQvdJwvqKZ4
Does anyone know how I can recover the bootloader of the device?
The bootloader is my biggest concern, because if the device start and stop again with LG logo can at least return the device to the customer.
rodrigocswm said:
Hi everyone.
First sorry my poor english.
Yesterday I received a phone (LG L4 II E467F Dual SIM) from a customer, the unit was but connecting the loading stopped with the LG logo and stand on this screen. I tried to upgrade the PC Suite, the cell was placed in download mode and the update is performed by the software, download and recording was carried out on the device during the recording process progress was up to 94% with the power on, when he got 95% the device was turned off automatically (A device's battery was at about 70% during the process), then the process has reached 100% normally without error messages.
After this the phone turned a brick, does not care, does not vibrate, does not go into download mode, finally does nothing. But noticed that it was shown in Windows Device list without driver. I used a software to install drivers and the device driver has been installed and he was recognized as "USB Port MTK (COM5)."
I watched a few topics about it, but could not properly understand the procedure and I was afraid to end any device recovery chance.
http://forum.xda-developers.com/showthread.php?t=1943442
http://forum.xda-developers.com/showthread.php?t=2160490
http://forum.xda-developers.com/showthread.php?t=1943442&page=91
https://www.youtube.com/watch?v=TQvdJwvqKZ4
Does anyone know how I can recover the bootloader of the device?
The bootloader is my biggest concern, because if the device start and stop again with LG logo can at least return the device to the customer.
Click to expand...
Click to collapse
Sorry, I wrote hard brick in the title, but actually just learned the real difference between soft brick and hard brick, and my problem is soft brick
Hi, thank you for using XDA Assist. The purpose of XDA Assist is to point you in the right direction, it's not a help desk. See this, http://forum.xda-developers.com/showthread.php?t=2764768. Since your looking in the right place to get your question answered I'm going to close this thread.
dear friend
i have y511-u30...unfortunately i wipe system partition and my phone hang on start and i have not access to recovery or anything.i found a article about flash phone with sp flash tools and i did it but now my phone do not turn on at all and in sp flash tools not found my phone .in my computer (win7) in device manager for some second comes an item : Android usb ethernet/rndis and after seconds gone.please help me with this .i really need my phone.thanks
strix666 said:
dear friend
i have y511-u30...unfortunately i wipe system partition and my phone hang on start and i have not access to recovery or anything.i found a article about flash phone with sp flash tools and i did it but now my phone do not turn on at all and in sp flash tools not found my phone .in my computer (win7) in device manager for some second comes an item : Android usb ethernet/rndis and after seconds gone.please help me with this .i really need my phone.thanks
Click to expand...
Click to collapse
hello strix666 unfortunately your problem may not be fixed for some causes :
1. your phone is a low quality phone (sorry for saying that)
2.before huawei created the phone some documents leaked and many companies created clones with much lower quality
3. this is a common problem with this model of huawei phone so don't be surprised if it has gone BRICKED without anything
and i wanted to know what were you doing with the phone (with details) before that happens and did you try to had reset it?
paywand said:
hello strix666 unfortunately your problem may not be fixed for some causes :
1. your phone is a low quality phone (sorry for saying that)
2.before huawei created the phone some documents leaked and many companies created clones with much lower quality
3. this is a common problem with this model of huawei phone so don't be surprised if it has gone BRICKED without anything
and i wanted to know what were you doing with the phone (with details) before that happens and did you try to had reset it?
Click to expand...
Click to collapse
Dear sulaimaniyah,
thank you and i appreciated for honest answer, i instal a recovery that support touch and have so many features (recovery_TWRP_2.6.3.0) . i go to wipe section and wipe system partition.after restart phone my phone just stay on the logo huawei and do nothing.i try to flash my phone with SP flash tools but after 2time failed in process (i think because of wrong files that i chosen) .that logo doesn't show and my phone doesn't turn on and show nothing .in my computer in device manager comes an item with name Android Usb Ethernet/rndis but with yellow mark and i try so many drivers but still nothing.and for hard reset i have not access to any function.
strix666 said:
Dear sulaimaniyah,
thank you and i appreciated for honest answer, i instal a recovery that support touch and have so many features (recovery_TWRP_2.6.3.0) . i go to wipe section and wipe system partition.after restart phone my phone just stay on the logo huawei and do nothing.i try to flash my phone with SP flash tools but after 2time failed in process (i think because of wrong files that i chosen) .that logo doesn't show and my phone doesn't turn on and show nothing .in my computer in device manager comes an item with name Android Usb Ethernet/rndis but with yellow mark and i try so many drivers but still nothing.and for hard reset i have not access to any function.
Click to expand...
Click to collapse
dear strix666
i'm very sorry but the (recovery_TWRP_2.6.3.0) is a recovery used for lenovo phones specially lenovo p780 and as the most common results there are 3 things that happen :-
1. the phone gets bricked possibility : %70 (your current phone situation)
2. the phone gets stuck in a boot loop possibility : %22 ( thats what happened to your phone at the first flash )
3. the phone stays safe and nothing happens possibility : %8 ( impossible )
and so after you tried to fix it by flashing it 2 times again it is commonly bricked which can't be fixed easily and the only way to fix it is by using apps similar to odin.
but before that i need to need know some other details :-
1. does it charge or show the charging icon?
2. try to hold the volume down and power key for about 15 seconds anything happened?
3. connect it to your pc and go to | start menu > devices and printer > right click your device > troubleshoot
and if it doesn't appear please tell me.
by the way my name is paywand and sulaimaniyah is my city