hello every one i tried to update my g2x stock , to the 2.3 and when i did it with he lg update tool, it went through the process and i havd to reboot my phone , and then it just got stuck on the S/W and nothing happened i left it for hours , but nothing , so i came to the xda forum and i start reading , and i kept trying the KDZ_FW_UPD_EN.7z, with the kdz file but nothing , it kept on failing , so i spoke to tech support they told me its back order , so they transferred me to lg and they told me i have to send it in i also tried a hard reset but still nothing , same S/w issue , is this mean the phone is brick
Just wondering.. what % did you get stuck at with the LG update tool?
Mines got stuck at 4% because I didnt have the LGUSBModemDriver_WHQL_Eng_Ver_4.8.1 install. So it prompt to do so, and click Refresh.
If you have no luck with the LG update tool, maybe try reflash the NVFlash and do a restore?
I'm running Windows 7 64bit btw.. and after I downloaded and installed that driver.. it only took me 5min to install the update...
740man - did you follow this guy's instructions? I skipped #2 and #4 and it worked great for me (on XP).
http://forum.xda-developers.com/showthread.php?p=15878353#post15878353
Mine quit on 5% BTW. That tool is terrible.
yes i tried the last step , even in windows xp it was just failing i left it for hours , and it just would not wanna reboot , i followed the instructions step by step i get all the way till it tells you to disconnect and remove the battery then press restart , i been working on it since 8 this morning , i been using the lg update tool but when that failed i tried the method above and still same issue , it just wouldn't go pass the s/w , i think there going to send me refurbish one , cheap [email protected]#%$%s
http://forum.xda-developers.com/showthread.php?t=1179533&page=23
I was having same issue and this is how I solved it! Check link! Post 222.
....
i hope i wont get a refurbish phone , what are the chances of getting one any ways , any one know
Related
My phone is LG P999, I am trying to do software update on it, it got stuck at S/W update screen.
Things i have tried so far
1) i have tried update with LG update tool but its showing me no connectivity in my LG phone and PC error
2) As suggested by lot of people at xda i have tried hard reset of my phone but for some reason its coming back at same screen
3) As suggested on xda i have tried this link too
http://forum.xda-developers.com/showpost.php?p=15878353&postcount=112
where i tried these files
V21E_00.kdz
KDZ_FW_UPD_EN
One-Click-G2x-recovery-flasher-06-16.rar
LG USB Drivers G2x
i was able to do complete process but when i am trying to do last step to run
V21E_00.kdz , it just showed me some error messages at this point and failed to complete the process
Any suggestion how can i get my phone back in working condition again. Thanks in advance
You could try this: http://forum.xda-developers.com/showthread.php?t=1056847.
Thanks a lot i will try this and let u know pretty soon .. Thanks for such a big help
Thanks to this wonderful link, i have tried and succesfully reached at last step where i can see all the options , i tried factory reset but its still coming back at same place where i started like S/W upgrade screen.
Could anybody please let me know what should i do next to bring my phone back to normal.
i don't want to click any wrong button at this point , please help
list says
reboot system now
apply update from sd card
wipe data factory reset ....done already no help
install zip from sd card
backup and restore
mounts and storage
advanced
power off
after im facing error
after im facing Error - No signal , no battery level no IMEI show ! what happen ?
bindudhindsa said:
My phone is LG P999, I am trying to do software update on it, it got stuck at S/W update screen.
Things i have tried so far
1) i have tried update with LG update tool but its showing me no connectivity in my LG phone and PC error
2) As suggested by lot of people at xda i have tried hard reset of my phone but for some reason its coming back at same screen
3) As suggested on xda i have tried this link too
http://forum.xda-developers.com/showpost.php?p=15878353&postcount=112
where i tried these files
V21E_00.kdz
KDZ_FW_UPD_EN
One-Click-G2x-recovery-flasher-06-16.rar
LG USB Drivers G2x
i was able to do complete process but when i am trying to do last step to run
V21E_00.kdz , it just showed me some error messages at this point and failed to complete the process
Any suggestion how can i get my phone back in working condition again. Thanks in advance
Click to expand...
Click to collapse
ok so i was using kdz updater to flash my rom on my phone set mode to 3GQCT Phone mode DIAG and my phone is in emergency mode so then i hit launch software update while flashing see some dll msg error's and stuff meanwhile its done and it rebooted my phone then i look at my phone and i see its stuck on lg screen and white flashing screen tried taking out the battery and put it back in no luck tried holding downvolume+home+power still no luck tried flashing again still no luck im using V10F_00.kdz for stock rom btw plz help
Model?
ayman244 said:
ok so i was using kdz updater to flash my rom on my phone set mode to 3GQCT Phone mode DIAG and my phone is in emergency mode so then i hit launch software update while flashing see some dll msg error's and stuff meanwhile its done and it rebooted my phone then i look at my phone and i see its stuck on lg screen and white flashing screen tried taking out the battery and put it back in no luck tried holding downvolume+home+power still no luck tried flashing again still no luck im using V10F_00.kdz for stock rom btw plz help
Click to expand...
Click to collapse
Is it the Dual sim L3-e405 or the singles sime L3-E400?
have you installed the the driver?
try to use phone mode to emergency mode. I forgot all the options since I only have the e405 3 months ago. Hope it helps, and maybe you could try to use OS with higher version, if you are using windows xp be sure it is sp3.
i have lg optimus l3 e400 and im running windows 7 i didnt delete the current rom when i wanted to update is that ok? or bad tried emergency as phone mode didnt work
problem solved it turned out that i didnt pay attention to the rom i downloaded was for e405 so now i downloaded one for e400 and it worked
Hi everyone ! I am new to forum, so please forgive me if I post into the wrong category .
I have a very big problem with my phone (LG L3 Optimus E400) . I have installed a lot of custom roms on it and yesterday I realized that the current rom I was using doesn't receive text messages so I decided to try antoher one and I had the "great" idea to Flash v20 Baseband for flashing SlimBeane610 rom. That was very silly. After I flashed the rom, I rebooted my phone and nothing happened, screen is black all the time. When I press the power button the phone vibrates and the back and menu buttons lights up for 1 second like normal log on, then boom, all goes black again and if I don't remove the battery and I press the power button or any combination (like Reset, Emergency mode) doesn't work. I googled everything, I found something on this forum but not very useful. I tried wit adb but my phone isn't on so it can't be recognized. I tried wit KDZ Updater (until the phone was recognized) but I get a error like WParam: 100 and LParam: 500. When I connect it with USB sounds are playing like normal and Mobogenie wants to connect with it but I can't enable USB Debugging so it's pissing me off . If I can enable USB Debuggins from PC somehow, maybe I can connect phone with Mobogenie and make a restore , a backup or flash another rom, it would be easy If I can go into recovery or emergency mode but I can't . If it would exist a software that can erase everything on the phone when the it's turned off ... .I tried with LG TOOLS, LG PC SUITE IV, LG FLASH TOOLS, Android MULTI TOOLS and nothing(i have the latest drivers installed). Can I make something to it using the external_sd (like put a flash into it, connect it through PC via USB cable and try to flash a rom from command prompt but I don't know the paths). This is a very hard problem, I have a bricked L3 and I don't know hot to unbrick, I think isn't only a soft problem, maybe I should do something with its hardware ? If anyone could help I would really appreciate .
Thanks in advance !
PS : I won't be able to follow this conversation until the next week because I am going to "Primitive Age" right now...oh God, I'm only good to smash things . :crying:
PodGom said:
The most important thing is, can you see the LG logo that shows up in normal boot? If you don't, it'd be either a screen problem or a hard brick. Nobody except LG can fix these problems, and you would have to pay LG some money to fix the phone. But if you DO see the LG logo and your phone stops, you can try the below options.
It just may be bricked, and you could try getting into recovery and flash an alternative ROM. But if that doesn't work, tryLG mobile support tools to get it back to its stock firmware. Good Luck!
Click to expand...
Click to collapse
No, I can't see the LG logo . If I could saw the LG screen was very easy to fix it. I think the phone it's really dead and I also think that even an authorized service can't fix it . Do you know an approximately price for fixing this issue ? Thanks .
Hi,
You should definitely ask the experts who own your device for help, Here...
http://forum.xda-developers.com/optimus-l3-l5-l7/help
Good luck!
Thank you. Thread closed.
My LG v10 stuck on LG Logo, but when I attach an USB cable with computer it further goes to att logo and after 3 or 4 spins, it again stuck on att logo. I can get into download mod but not recovery or safe mod. I tried to flash my phone with LGUP but it shoes unknown model. tried with upper cut and common folder options but no luck. LG flash toll 2014 does not detect my phone and application stop responding when I try to read phone information. tried on different computers, different USB cables and different windows but the result is same. Once I had a LG f350 and faced the same problem. Only LG Flash tool 1.8 worked for my LG F350. I am hope full it may work for my LG H900 but I can't find TOT+dll file for LG H900 nowhere. Any one can help please.
I was on 5.1.1. rooted, Super SU and busy box installed when I tried to factory reset my phone and got into this trouble.
More Problems
I got a LG Firmware Extractor from a post on XDA. Extracted the KDZ file and got a .dz and .dll file. extractor also showing another file (something like .dllyib i think) but I ignored that and extracted what I needed. After that I flashed my phone with lg flash tool 1.8.. but flash tool kept on installing system file after 100% but my phone was stuck on 99%. After 117 % flash tool showed "waiting for connection" and then failed. I tried to reflash and got the same result. Now after showing LG screen, my phone got stuck on a black screen showing some bars going up and text "MiniOS" and stuck on this screen. I searched for the solution and some one told me to disconnect phone when flashing reached at 99% and then reattach it after changing the port. I did that but what I got was worse than before. :crying: Now I can get into recovery screen but after applying factory reset, phone goes off and restart again without doing any thing. My phone is stuck on boot loop at LG Logo. it keep booting when i connect to a charger or my computer . I cant get into download mod now. when I try to get into download mod, the screen with some dots appear and then phone restart again without going into download mod. when I connect my phone to PC it only do boot looping and nothing appear on my computer. My phone does not appear in device manager. Is there anything I can do now????????
Shahidessa said:
I got a LG Firmware Extractor from a post on XDA. Extracted the KDZ file and got a .dz and .dll file. extractor also showing another file (something like .dllyib i think) but I ignored that and extracted what I needed. After that I flashed my phone with lg flash tool 1.8.. but flash tool kept on installing system file after 100% but my phone was stuck on 99%. After 117 % flash tool showed "waiting for connection" and then failed. I tried to reflash and got the same result. Now after showing LG screen, my phone got stuck on a black screen showing some bars going up and text "MiniOS" and stuck on this screen. I searched for the solution and some one told me to disconnect phone when flashing reached at 99% and then reattach it after changing the port. I did that but what I got was worse than before. :crying: Now I can get into recovery screen but after applying factory reset, phone goes off and restart again without doing any thing. My phone is stuck on boot loop at LG Logo. it keep booting when i connect to a charger or my computer . I cant get into download mod now. when I try to get into download mod, the screen with some dots appear and then phone restart again without going into download mod. when I connect my phone to PC it only do boot looping and nothing appear on my computer. My phone does not appear in device manager. Is there anything I can do now????????
Click to expand...
Click to collapse
hi @Shahidessa any luck ? what happend did you suceed flashing the phone ? same problem with mine as well T-mobile H901 but not detedting in LGUP. any idea on LG Flash tool ?
SandyKick said:
hi @Shahidessa any luck ? what happend did you suceed flashing the phone ? same problem with mine as well T-mobile H901 but not detedting in LGUP. any idea on LG Flash tool ?
Click to expand...
Click to collapse
Nop. .. I sent my phone to a friend to get that repair from a repairing shop... not received back yet....
Shahidessa said:
Nop. .. I sent my phone to a friend to get that repair from a repairing shop... not received back yet....
Click to expand...
Click to collapse
Failed several times and gave up with LG UP. So i took my phone to a mobile service center who is good at software flashing. i gave him nougat kdz F600S30D. He converted kdz to dz format and flashed with Octoplus box. my mobile was on 5.1.1 android and directly flashed Nougat. Booted flawlessly and no network problems as well Everything is working just awesome. attached my video of Nougat Overview
F600S Nougat Overview - https://www.youtube.com/watch?v=1imf_Utze44&t=18s
SandyKick said:
Failed several times and gave up with LG UP. So i took my phone to a mobile service center who is good at software flashing. i gave him nougat kdz F600S30D. He converted kdz to dz format and flashed with Octoplus box. my mobile was on 5.1.1 android and directly flashed Nougat. Booted flawlessly and no network problems as well Everything is working just awesome. attached my video of Nougat Overview
F600S Nougat Overview - https://www.youtube.com/watch?v=1imf_Utze44&t=18s
Click to expand...
Click to collapse
Great.... I am happy for you... My phone rejected by 3 repair shops as my friend told me.....
Hello There ..... My device had a heatingup prob so it got stuck on lg logo so i tried recovery and it done nothing so i downloaded a firmware i flash it with lgup yeah i took risk and it worked but after a hour it stucked on boot logo again so i tried to flash it again when it was all done phone goes to the dark world and never came back now when i connect it it says qhusb_bulk i used sd card method but it didnt worked and still dying to use this phone havent been a month i bought it and now . so please guys show me the way please . i cant afford another phone please. Thanks y'all . Peace