Database Info

g2x froze on S/W

hello every one i tried to update my g2x stock , to the 2.3 and when i did it with he lg update tool, it went through the process and i havd to reboot my phone , and then it just got stuck on the S/W and nothing happened i left it for hours , but nothing , so i came to the xda forum and i start reading , and i kept trying the KDZ_FW_UPD_EN.7z, with the kdz file but nothing , it kept on failing , so i spoke to tech support they told me its back order , so they transferred me to lg and they told me i have to send it in i also tried a hard reset but still nothing , same S/w issue , is this mean the phone is brick

Just wondering.. what % did you get stuck at with the LG update tool?
Mines got stuck at 4% because I didnt have the LGUSBModemDriver_WHQL_Eng_Ver_4.8.1 install. So it prompt to do so, and click Refresh.
If you have no luck with the LG update tool, maybe try reflash the NVFlash and do a restore?
I'm running Windows 7 64bit btw.. and after I downloaded and installed that driver.. it only took me 5min to install the update...

740man - did you follow this guy's instructions? I skipped #2 and #4 and it worked great for me (on XP).
http://forum.xda-developers.com/showthread.php?p=15878353#post15878353
Mine quit on 5% BTW. That tool is terrible.

yes i tried the last step , even in windows xp it was just failing i left it for hours , and it just would not wanna reboot , i followed the instructions step by step i get all the way till it tells you to disconnect and remove the battery then press restart , i been working on it since 8 this morning , i been using the lg update tool but when that failed i tried the method above and still same issue , it just wouldn't go pass the s/w , i think there going to send me refurbish one , cheap [email protected]#%$%s

http://forum.xda-developers.com/showthread.php?t=1179533&page=23
I was having same issue and this is how I solved it! Check link! Post 222.
....

i hope i wont get a refurbish phone , what are the chances of getting one any ways , any one know

any1 have a copy of Bell/Virgin LG Eclypse C800G Stock Rom/backup?

any1 have a copy of Bell/Virgin LG Eclypse C800G Stock Rom/backup? and info how to re-add the rom back to the phone?
I restarted my phone and now its stuck on the LG Logo boot screen. I tried doing the Hard reset using Vdown + A + F + Power came up with the android logo and still nothing. now since doing the hard reset its just always after turning on it goes into the reset mode then lo boot logo and sticks with the boot logo.
Thanks
P.S. sorry if this is in the wrong section and if so please place it to right section without deleting topic? Thanks

anyone?
Please I'd be most thankful if you could help me out as i really need the phone since the wife is 8months pregnant and I need the phone just in-case she goes into early labor and I'm out or at work she can call me.
Thanks

solution yet?
hey i was wondering if u found a solution yet as i am having the same problem with the same phone my c800g boots up to restore screen then stops and goes to LG screen, none of the key combinations work that iv found to get into recovery/fastboot/cmw so i am lost at what to do now

DROIDNOOB79 said:
hey i was wondering if u found a solution yet as i am having the same problem with the same phone my c800g boots up to restore screen then stops and goes to LG screen, none of the key combinations work that iv found to get into recovery/fastboot/cmw so i am lost at what to do now
Click to expand...
Click to collapse
Nope sorry. Wish I did.

DROIDNOOB79 said:
hey i was wondering if u found a solution yet as i am having the same problem with the same phone my c800g boots up to restore screen then stops and goes to LG screen, none of the key combinations work that iv found to get into recovery/fastboot/cmw so i am lost at what to do now
Click to expand...
Click to collapse
where did you buy the phone?

i got it off my roommate he just turned it off one night then when he turned it back on it was stuck on LG screen then i tried a restore and now it gets stuck on the restore/ android unboxing screen then it stops and reboots and does it again

I believe that I have found the Stock Rom for the LG Eclypse | LG-C800G
LG Eclypse | LG-C800G Stock Rom in KDZ file format:
- http://csmg.lgmobile.com:9002/swdata/WEBSW/LGC800G/AVMBDG/V10c_00/V10C_00.kdz
I'm new to this so if anyone knows how to load the .KDZ file to the phone can you please let me know?
Thanks
BTW I found the ROM by going here:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=INSERT IMEI HERE
Code:
<?xml version='1.0' encoding='utf-8' ?>
<response req_cmd='auth_model_check' status='OK'>
<auth_model_check>
<result>OK</result>
<esn>YOUR IMEI WILL BE HERE</esn>
<model>LGC800G</model>
<suffix>AVMBDG</suffix>
<msn>YOUR PHONES S/N WILL BE HERE</msn>
<esn_date>THE DATE OF THE IMEI WAS CREATED</esn_date>
<sw_version>V10C_00</sw_version>
<sw_url>http://csmg.lgmobile.com:9002/swdata/WEBSW/LGC800G/AVMBDG/V10c_00/V10C_00.kdz</sw_url>
<sw_locale_url>http://csmg.lgmobile.com:9002/swdata/WEBSW/LGC800G/AVMBDG/V10c_00/V10C_00.kdz</sw_locale_url>
<sw_recommand_uri>GLOBAL/GLOBAL</sw_recommand_uri>
<app_version></app_version>
<app_url></app_url>
<cs_em_flag>N</cs_em_flag>
<cs_em_uri>N</cs_em_uri>
<chip_type>EG</chip_type>
<prod_type>GSM</prod_type>
</auth_model_check> </response>
Thanks to Crashff over @ androidforums.com and his/her post @- http://androidforums.com/t-mobile-mytouch-q/589060-c800-submodels-g-dg-vl.html

I would like to inform XDA-Dev that the LG Eclypse | LG-C800G Stock Rom in KDZ file format is the true stock rom for the LG Eclypse | LG-C800G. I have tested it and it recovered my device.
I will give a lil info on how I did it the best I can but bare with me as I was not really keeping track on what I was doing when i did it.
1.) Download the LG Eclypse LG-C800G Stock Rom in KDZ file format by going
here:
- http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=INSERT IMEI HERE
and enter your IMEI where you see INSERT IMEI HERE in the address bar
or if your with (Virgin Mobile CANADA) then here:
- http://csmg.lgmobile.com:9002/swdata/WEBSW/LGC800G/AVMBDG/V10c_00/V10C_00.kdz
2.) Plugged in the phone
3.) I disabled the lge android platform usb modem
4.) I clicked on msxml.msi and
uninstalled it. then reinstalled after
uninstall was completed
5.) right clicked on KDZ_FW_UPD.exe ( You can download KDZ_FW_UPD.exe here: http://forum.xda-developers.com/attachment.php?attachmentid=420545&d=1287222698 ) and
went to Properties then Compatibility and selected Windows XP SP2.
I also clicked on Run this program as an administrator. then pressed Apply or OK
6.) I then opened up B2CAppSetup.exe (DON'T DO ANYTHING WITH IT YET wait till you get to ((STEP 10)) ) it can be found here: http://csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe
7.) I then ran KDZ_FW_UPD.exe and only changed the phone mode to EMERGENCY or CS_EMERGENCY I can't remember what one i picked so try all.
8.) I then selected the KDZ File
9.) I then pressed Launch software update as it was extracting the KDZ file
I did this (Step 10)
10.) I then went back to B2CAppSetup.exe then clicked on Customer Support then clicked on Recovery Phone then I entered in my IMEI then pressed Check
and there ya go. the B2CAppSetup.exe should look for and download your rom as KDZ_FW_UPD.exe starts recovering your phone. now let both complete even if one says its done.
Again hope this helps and sorry if its not a good guide as i was not keeping track as to what I was doing.

Lnks not working for the downloads
Plz am currently in gh same situation bt th lknks are not working. plz help me find th stock fom since I've looked allover in vain.

Halp
I need this, I have the T-mobile version of the rom. But I would really like the Canadian version, without the T-mobile **** on it.

Clockworkmod boot loop after OTA update

Hi, this is my first time to post here but i really need help, I installed ClockworkMod Recovery v5.8.4.5 on my LG Optimus L3 E400, I used ROM Manager to install it. but then sometime a while ago, i accidentally selected Update Software on my phone software update option, Now I was stuck at the Clockworkmod recovery screen. I panicked and wipe data factory reset, but still it goes back to CWM. then I tried backup and then restored it afterwards it said restore complete with no error but still goes back to recovery. I also tried KDZ updater with no luck so far. I also tried wiping up everything and restore with no success..Please help

LG E400 ClockWorkMod Recovery Boot Loop
Hello, another android noob here, for 5days stuck with the same problem as TS, and anyone else using the LG (e400) update on CWM atleast v5.8.4.5
* i know this is also discussed in : http://forum.xda-developers.com/showthread.php?t=1610666&page=39, but more centralized would suit this forum, and help a lot of others i think ?
ive tried....
restoring the backup i created with the LG PC Suite software, no luck..
using the lg mobile support tool to restore, error: version not supported !?
installing the following zip's using CWR install from sdcard, except not fixing the boot-loop, the following installed without any problems
stockrom+.zip
stock_recovery_restorer.zip
cm-9-20120831-NIGHTLY-e400.zip
these failed with error:
uninstall-CWR.zip error: error in uninstall-CWR.zip (file on HD seems ok, redownloaded anyway, no change)
CWM-Installer-E400.zip error: installation aborted
LG_E400_Stock_Recovery+MountPoints.zip error: installation aborted
then i tried....
ADB fastboot , after: adb reboot-bootloader , the com4 connection in "xp: devices: ports" disappears, and adb devices + fastboot devices cant find the phone
last 5 lines on phone itself:
udc.start
reset
portchange
reset
portchange
* the phone hasnt crashed at this point, each time when i reconnect the usb it will reset and portchange (twice)
* a few times i got past this, and got:
STALL GET_DESCRIPTOR 128 6 1006 018
reset
portchange
reset
portchange
* since i couldnt install the sdk/extra/google usb drivers (error: contains no info for your hardware), ive tried with these usb drivers:
LGUnitedMobileDriver_S4981MAN36AP22_ML_WHQL_Ver_3.6.exe
LGUnitedMobileDriver S4981MAN37AP22 ML WHQL Ver 3.7.2.exe
* adb interface in devices shows: AndroidNet Sooner Single ADB interface
then i tried the KDZ_FW_UPD.exe option to flash : V10I_00.kdz , didnt work
found another KDZ option for lg (LgFlashPackacge) on acidhazardRom with: UpTestEX_mod2_marwin.exe, that also didnt work
both end with (loose translation from dutch) : error in MOD UpTextEx MFC Application, program terminated
ive also been reading: http://forum.xda-developers.com/showthread.php?t=1186406&page=5
* the battery loading animation hasnt been showing since the cwr boot-loop started
thinking about trying a new xp install (Again), but im hoping there is some fault in my previous work, or something else i didnt try !?
im about to give up on this and send the phone to LG, but that would feel like a defeat

LG e400 Boot Loop after LG Update
ive tried the options again...and wrote down some more info, i also reinstalled a clean XP : SP3 (incl all updates, except powershell)
installed: LG Mobile support tool incl designated lg drivers
it all looks fine, connects and will detect the phone model, but when "checking software version"
(still in the analysis screen) it stops with "Software update is not supported for this model"
*im guessing thats because of the cwm recovery ?
ADB Fastboot
installed: java - jre-7u5-windows-i586-iftw.exe
adb devices will only show my lg when in recovery menu
adb reboot-bootloader
the screen starts with: USB Init , then a lot of data pases like userdata, persist, cache and tombstones
(they all share status 0x0 <- if that means anything to anyone ?)
fastboot erase recovery and fastboot flash recovery recovery.img both end with [waiting for device]
fastboot devices, produces nothing (not even an error)
KDZ
edit: with msxml 4.0 SP3
once i plug in the usb the phone will show the LG logo, i cant mannualy put it in emergency mode
ive tried using kdz on the lg-logo and cwm recovery screen, i also tried Diag and Emergency modes,
the whole process always looks fine, there are no error lines in the logs, althoug it doesnt seem like a problem,
there is only one blank line:
Param : moduleDir =
all logs end with:
23:00:27 : Step Complete : UPDATE FINISHED!
23:00:27 : ResetStartInfo() Call
23:00:27 : _DetachDLL Call
23:00:27 : _DetachDLL Call End
23:00:27 : FreeLibrary Call
23:00:27 : FreeLibrary Call End
23:00:27 : ResetStartInfo() Call End
23:00:27 : ===FINISHED===
then i get the MOD UpTextEx program terminated error, i can still access the KDZ_FW_UPD.exe till i close the error window
edit: also tried...
- as very 1st step to restore the cwm backup
- adb + kdz under Vista
- lg mobile support tool, emergency mode under support option, gives another version error on entering imei or serial

I just wanna ask ..
Where does your phone stuck? In Clockwork recovery or in the LG's logo screen? What version of windows are you using?

nickocelot said:
Hi, this is my first time to post here but i really need help, I installed ClockworkMod Recovery v5.8.4.5 on my LG Optimus L3 E400, I used ROM Manager to install it. but then sometime a while ago, i accidentally selected Update Software on my phone software update option, Now I was stuck at the Clockworkmod recovery screen. I panicked and wipe data factory reset, but still it goes back to CWM. then I tried backup and then restored it afterwards it said restore complete with no error but still goes back to recovery. I also tried KDZ updater with no luck so far. I also tried wiping up everything and restore with no success..Please help
Click to expand...
Click to collapse
I think you need come back to default Rom Stock of your LG Optimus .After that you can do step by step to update Rom use ClockworkMod Recovery again. If still get error ,you need review the Rom want update for your phone has appropriate or not ?
Good luck.......^^

When i start my phone it will go straight to CWM recovery menu, when i connect to usb when the phone is off it will show lg logo

ClockWorkMod Rom Tools Recovery
ive been working with pc's for over 20years, doesnt matter how you mess up ..theres an easy fix, i was approaching my little LG with the same trust of available tools
ironically, i had installed the Clockworkmod ROM Tools as a safeguard, since i kept reading that its backup was the best
my lesson learned:
since you can backup your stuff and recover with the LG tools, and use other apps for the other functions, theres no point in risking bricking your phone ....when you dont really need it
also im glad i choose to buy an LG since -apparently- i can still send my phone for repair without any costs, considering it all, thats a great service ...almost a miracle
ill keep lurking to see the Cyanogenmod progress, which ill probably install with a multiboot app instead of CWM
feel free to disagree / discuss my opinion

can you please share your back-up please?:crying:

Same problem here! I don't know why on earth I tried to do the OTA update...
exitrecovery.zip didn't help either.... damn
EDIT: Did this: http://forum.xda-developers.com/showthread.php?t=1610666&page=43 and got it working again!!!

The same problem but I didn't no how to fix it!
Hi guys:crying:,
I do have te same problem of you have to but I doesn't know how to fix it.
From google I have found this tread and that's why I've become a member.
All what you guys said, I doesn't understand how t ofix it by myself with the same way too.
Can anybody please tell me a easier way for a beginner as I am?
Thanks already!
Sorry for bad English.

[Completed] [Q] Black Screen of Death

Hi everyone ! I am new to forum, so please forgive me if I post into the wrong category .
I have a very big problem with my phone (LG L3 Optimus E400) . I have installed a lot of custom roms on it and yesterday I realized that the current rom I was using doesn't receive text messages so I decided to try antoher one and I had the "great" idea to Flash v20 Baseband for flashing SlimBeane610 rom. That was very silly. After I flashed the rom, I rebooted my phone and nothing happened, screen is black all the time. When I press the power button the phone vibrates and the back and menu buttons lights up for 1 second like normal log on, then boom, all goes black again and if I don't remove the battery and I press the power button or any combination (like Reset, Emergency mode) doesn't work. I googled everything, I found something on this forum but not very useful. I tried wit adb but my phone isn't on so it can't be recognized. I tried wit KDZ Updater (until the phone was recognized) but I get a error like WParam: 100 and LParam: 500. When I connect it with USB sounds are playing like normal and Mobogenie wants to connect with it but I can't enable USB Debugging so it's pissing me off . If I can enable USB Debuggins from PC somehow, maybe I can connect phone with Mobogenie and make a restore , a backup or flash another rom, it would be easy If I can go into recovery or emergency mode but I can't . If it would exist a software that can erase everything on the phone when the it's turned off ... .I tried with LG TOOLS, LG PC SUITE IV, LG FLASH TOOLS, Android MULTI TOOLS and nothing(i have the latest drivers installed). Can I make something to it using the external_sd (like put a flash into it, connect it through PC via USB cable and try to flash a rom from command prompt but I don't know the paths). This is a very hard problem, I have a bricked L3 and I don't know hot to unbrick, I think isn't only a soft problem, maybe I should do something with its hardware ? If anyone could help I would really appreciate .
Thanks in advance !
PS : I won't be able to follow this conversation until the next week because I am going to "Primitive Age" right now...oh God, I'm only good to smash things . :crying:

PodGom said:
The most important thing is, can you see the LG logo that shows up in normal boot? If you don't, it'd be either a screen problem or a hard brick. Nobody except LG can fix these problems, and you would have to pay LG some money to fix the phone. But if you DO see the LG logo and your phone stops, you can try the below options.
It just may be bricked, and you could try getting into recovery and flash an alternative ROM. But if that doesn't work, tryLG mobile support tools to get it back to its stock firmware. Good Luck!
Click to expand...
Click to collapse
No, I can't see the LG logo . If I could saw the LG screen was very easy to fix it. I think the phone it's really dead and I also think that even an authorized service can't fix it . Do you know an approximately price for fixing this issue ? Thanks .

Hi,
You should definitely ask the experts who own your device for help, Here...
http://forum.xda-developers.com/optimus-l3-l5-l7/help
Good luck!

Thank you. Thread closed.

[Completed] sony xperia sp bricked and need help im at a lost end :(

Hi, I'm a noob to this site and is my last call of action ive tried everything to get my phone working but I'm at a lost end now and getting frustrated.
If anyone can help me with my problem it will be much appreciated and a lot of pressure taken off me. to start with I towel rooted my xperia sp (c5303) which gave me root. I then installed a recovery called philz which worked great. installed lollipop all fine booted up but no data signal bar had explanation mark. I tried the data fix through recovery did not work so I thought il flash my device again to see if it rectifies my problem so I deleted all data cache delvic cache chose the file off sd card that I previously used but this time I got an error. and the phone just restarted . so I assume there is nothing on my phone now no firmware as it turns on comes up with the sony logo but hangs after a minute or so my phone turns its self off. I plug my phone into pc usb and the lightbar turns green at the bottom then after 40 seconds goes red with the sony logo again then after a minute reboots to green and so on in a boot loop state. I have tried flashing my phone to stock with flashtools but it gets so far then gives error that I don't have usb debugging and unknown sources enabled. I cant have them enabled as I cant access my phone. I have gone into flash tool drivers folder downloaded flashmode drivers and fastboot and viskan board it starts to install them comes up with welcome to device driver installation . sony(winusb) says failed. Google inc (winusb) says failed sony ericsson mobile communication says failed I assume it cant see my phone. I just don't understand what to do next.
If any body has had this problem could you please shed a little light, Thanks for taking time out to read this.
Chris

chris10286 said:
Hi, I'm a noob to this site and is my last call of action ive tried everything to get my phone working but I'm at a lost end now and getting frustrated.
If anyone can help me with my problem it will be much appreciated and a lot of pressure taken off me. to start with I towel rooted my xperia sp (c5303) which gave me root. I then installed a recovery called philz which worked great. installed lollipop all fine booted up but no data signal bar had explanation mark. I tried the data fix through recovery did not work so I thought il flash my device again to see if it rectifies my problem so I deleted all data cache delvic cache chose the file off sd card that I previously used but this time I got an error. and the phone just restarted . so I assume there is nothing on my phone now no firmware as it turns on comes up with the sony logo but hangs after a minute or so my phone turns its self off. I plug my phone into pc usb and the lightbar turns green at the bottom then after 40 seconds goes red with the sony logo again then after a minute reboots to green and so on in a boot loop state. I have tried flashing my phone to stock with flashtools but it gets so far then gives error that I don't have usb debugging and unknown sources enabled. I cant have them enabled as I cant access my phone. I have gone into flash tool drivers folder downloaded flashmode drivers and fastboot and viskan board it starts to install them comes up with welcome to device driver installation . sony(winusb) says failed. Google inc (winusb) says failed sony ericsson mobile communication says failed I assume it cant see my phone. I just don't understand what to do next.
If any body has had this problem could you please shed a little light, Thanks for taking time out to read this.
Chris
Click to expand...
Click to collapse
I have fixed it myself took me a week but I unlocked bootloader from sony did a full install of own rom, works perfect now. please close thread

chris10286 said:
I have fixed it myself took me a week but I unlocked bootloader from sony did a full install of own rom, works perfect now. please close thread
Click to expand...
Click to collapse
Glad you managed to fix it yourself.
If you have further questions, feel free to ask in the help thread for the Xperia SP
http://forum.xda-developers.com/xperia-sp/help
Thread closed.