Database Info

Bricked P350

Hello ,
Ive bricked a LG P350me and need a german stock rom (kzl) endig to flash this with the LG flash tool . Any Idea where i can get one ? I´ve found nothing at the whole internet ...
got one http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP350/ASEABK/V10c_00/V10C_00.kdz from LG server , has anyone the shortcut (ASEABK) for a German Rom ? ... got it ... ADEUAP

think the adminz need to bring a new forum for LG Optimus P350 in here !!

I've bricked my LG P350 too. After i use Call+Vol Up+End, I see this on my screen:
Fastboot mode started:
-- suspend --
-- reset --
-- portchange --
-- reset --
-- portchange --
STALL GET_DESCRIPTION 128 6 1006 0 18
fastboot: processing commands
What shall I do? Can anyone help me? What programs can I use to restore it?

I recieved today the same error-message:
I thought my p350 is bricked, but I tried with the following progs/images about 5 or 6 hours and my phone runs now with the custom rom.
-recovery-RA-pecan-2.2.1-GNM-drap.img.zip
-fastbootflasherV2.zip
-Pecamod_v0.5.zip
-install usb-driver for lg first. Don't run LG-Software
-open fastbootflasher
-connect phone via usb (several tries)
-flash recovery (recovery-RA-pecan-2.2.1-GNM-drap.img)
-reboot phone while holding volume down ,send + end buttons, than it will start in recovery mode.
-Install Pecamod_v0.5.zip from phone sd-card.
Good Luck

p350 bricked
I got similar error when I plugged my phone to my pc. It says:
Fastboot mode started:
-- suspend --
-- reset --
-- portchange --
-- reset --
-- portchange -
When not plugged in:
Fastboot mode started:
udc-start()
This is the only forum that tackles this subject/ and was trying to do these steps:
-install usb-driver for lg first. Don't run LG-Software
-open fastbootflasher
-connect phone via usb (several tries)
-flash recovery (recovery-RA-pecan-2.2.1-GNM-drap.img)
-reboot phone while holding volume down ,send + end buttons, than it will start in recovery mode.
-Install Pecamod_v0.5.zip from phone sd-card.
downloaded all of the files from net but unfortunately my pc doesnt detect my p350. I think I have downloaded all of the usb drivers available for my lg phone still no go/
Hey schweitzi67, can you give me a step by step instructions on how you did your recovery? I'd really appreciate it if you will. Thanks in advance.

first of all, since you all can boot into fastboot, NONE of you guys are bricked
and second, heres how to fix your fastboot (now before you continue, remember that you need to replace the lg optimus one files in this link with the files that suit your phone, which is to say that you need to find the kdz file for your phone before you begin this):
http://forum.xda-developers.com/showthread.php?t=1088046
http://forum.xda-developers.com/showthread.php?t=1015332
read through those two links carefully and make sure you know what you are doing because your phone can get bricked if you do something wrong. if you have the slightest doubt go research more

Hi. I tried doing all instructions from the first thread you posted. When everything is ready, plugged my p350, went to command prompt and typed "fastboot erase recovery" but it said "<waiting for device>" I have downloaded lgunited mobile driver from lgsetup (B2CappSetup). What do you think the problem is? Thanks!

joolsthebear said:
Hello ,
Ive bricked a LG P350me and need a german stock rom (kzl) endig to flash this with the LG flash tool . Any Idea where i can get one ? I´ve found nothing at the whole internet ...
got one from LG server , has anyone the shortcut (ASEABK) for a German Rom ? ... got it ... ADEUAP
Click to expand...
Click to collapse
Hey have you found a german rom? I am still searching, but i can´t find any Firmware with ADEUAP regioncode.
Maybe someone know where to get the firmware.
Nice Day

Be careful... I installed kdz wrong and now my phone, it does not work
I heard that can be easily solved if you start downloadmod but I do not know how to do it .... help

sweetnsour said:
first of all, since you all can boot into fastboot, NONE of you guys are bricked
and second, heres how to fix your fastboot (now before you continue, remember that you need to replace the lg optimus one files in this link with the files that suit your phone, which is to say that you need to find the kdz file for your phone before you begin this):
http://forum.xda-developers.com/showthread.php?t=1088046
http://forum.xda-developers.com/showthread.php?t=1015332
read through those two links carefully and make sure you know what you are doing because your phone can get bricked if you do something wrong. if you have the slightest doubt go research more
Click to expand...
Click to collapse
Thank you!! Your first link whas the solution for my problem, it wasn't easy for a noob like me, but it's doable if you follow those instructions very carefully
I'm so happy! thanks again.

my P350 is just dead
Hi Guys,
Have the very same problem here. Tried to flash new ROM, phone entered in yellow emergency screen, got an failed error from KDZ and now the phone is dead.
I can not seem to start it, tried any keys combinations but the phone seems to not respond at all.
If i at least could get into an emergency screen or something but...nothing...black screen and no hearth beat
Is this really the end of it?
Much appreciated for a solution here.

[Request] Optimus 3d Un-Brick

I want to make a request to the team of xdadevelopers to try to find a solution for many users who have bought the mobile in Uk and we are trying to update locked and do not work. Thanks and hope you could trust you are great many of us hope that solution.

If You have bricked phone You can try software and rom posted in thist topic:
http://forum.xda-developers.com/showthread.php?t=1242330
Click to expand...
Click to collapse
These tools and rom in bin format posted there should be able to unbrick any LG3D which reports to system as an omap4 device in bootloader mode, but's untested (noone with bricked LG3D tried it so far)

Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General

Not work
I test this tool on win xp & win 7 but it not work
at the begining everything goes ok, flashes 100% but after some time I get the following message?
Error WM_Progress_MSG
download fail
Check AT Command
Retry Check AT Command 1
Retry Check AT Command 2
Error
Check AT_Command Fail
Fail
Error WM_Progress_MSG
download fail
Error
Is not there another method? Let's try could you develop. Thanks for the reply

i've recently briked my Optimus 3D. Same errors...
try this:
- boot into recovery mode (not debug): power + volDown
- erase everything: cache, dinamic and static partitions.
- restart in debug mode: power + volUp.
- reflash using default lg emergency procedure(with lgMobileUpdate)
Hope it helps!

Try this tutorial: http://forum.xda-developers.com/showpost.php?p=17177547&postcount=2

It does not work any of those things.
it does not work any of those things, and try:
I can not do this:
- boot into recovery mode (not debug): power + volDown
- erase everything: cache, dinamic and static partitions.
- restart in debug mode: power + volUp.
- reflash using default lg emergency procedure(with lgMobileUpdate), do not enter
I can not do this, do not enter into recovery mode but if it into lg emergency procedure and not working.
And this tutorial I get these errors:
Error WM_Progress_MSG
download fail
Check AT Command
Retry Check AT Command 1
Retry Check AT Command 2
Error
Check AT_Command Fail
Fail
Error WM_Progress_MSG
download fail
Error
Thanks anyway but I need another way to fix it.

Optimus 3d Brick Solved
I managed to solve my problem, I did follow this tutorial http://forum.xda-developers.com/showthread.php?t=1287236 on Windows 7 32 bit. Works 100% I assure you, if you will repair the display bug appears xxxxx (I did not have time to see which) and then will come out the android robot with a bar and everything solved. I put the firmware version V10K_00.kdz not know if the same happened with the other.
Thanks to adixtra for that tutorial, had long been trying.

LG P999 phone stuck at S/W updating please wait error message. Thanks in advance.

My phone is LG P999, I am trying to do software update on it, it got stuck at S/W update screen.
Things i have tried so far
1) i have tried update with LG update tool but its showing me no connectivity in my LG phone and PC error
2) As suggested by lot of people at xda i have tried hard reset of my phone but for some reason its coming back at same screen
3) As suggested on xda i have tried this link too
http://forum.xda-developers.com/showpost.php?p=15878353&postcount=112
where i tried these files
V21E_00.kdz
KDZ_FW_UPD_EN
One-Click-G2x-recovery-flasher-06-16.rar
LG USB Drivers G2x
i was able to do complete process but when i am trying to do last step to run
V21E_00.kdz , it just showed me some error messages at this point and failed to complete the process
Any suggestion how can i get my phone back in working condition again. Thanks in advance

You could try this: http://forum.xda-developers.com/showthread.php?t=1056847.

Thanks a lot i will try this and let u know pretty soon .. Thanks for such a big help

Thanks to this wonderful link, i have tried and succesfully reached at last step where i can see all the options , i tried factory reset but its still coming back at same place where i started like S/W upgrade screen.
Could anybody please let me know what should i do next to bring my phone back to normal.
i don't want to click any wrong button at this point , please help
list says
reboot system now
apply update from sd card
wipe data factory reset ....done already no help
install zip from sd card
backup and restore
mounts and storage
advanced
power off

after im facing error
after im facing Error - No signal , no battery level no IMEI show ! what happen ?
bindudhindsa said:
My phone is LG P999, I am trying to do software update on it, it got stuck at S/W update screen.
Things i have tried so far
1) i have tried update with LG update tool but its showing me no connectivity in my LG phone and PC error
2) As suggested by lot of people at xda i have tried hard reset of my phone but for some reason its coming back at same screen
3) As suggested on xda i have tried this link too
http://forum.xda-developers.com/showpost.php?p=15878353&postcount=112
where i tried these files
V21E_00.kdz
KDZ_FW_UPD_EN
One-Click-G2x-recovery-flasher-06-16.rar
LG USB Drivers G2x
i was able to do complete process but when i am trying to do last step to run
V21E_00.kdz , it just showed me some error messages at this point and failed to complete the process
Any suggestion how can i get my phone back in working condition again. Thanks in advance
Click to expand...
Click to collapse

[Q] Stuck in CLockworkmod recovery mode after install system upgrade

Dear experts,
I am having a serious problem that I cannot boot my phone, everytime I reboot it goes to the recovery mode.
what I have done are as follow:
I have rooted phone by superoneclick (everyting work fine after that)
I installed Rom Manager from Market. and flash the v5.0.2.7
system indicate there is an OS update, I downloaded and install it, then the system start reboot, then I get stuck in the recovery mode.
I have done the backup with Rom Manager, but I tried to restore and also tried even update to a new rom, nothing helps.
My phone is LG P920 3D, can you please help to solve it?
Best regards,
kim

This happened to me, nobody on the forum was able to assist me in fixing it so I sent it to LG for a warranty repair and to my delight they fixed it. (even though technically the warranty was voided)

same
Megacamz said:
This happened to me, nobody on the forum was able to assist me in fixing it so I sent it to LG for a warranty repair and to my delight they fixed it. (even though technically the warranty was voided)
Click to expand...
Click to collapse
sent mine to. will be back after a few days.

Hi, i got the same problem and i succes to fix it.
First, connect you O3D with the usb cable on your computer and go on recovery mod ( seach on google how to do this )
After, go on LG Update and select this option :
( i'm french and i use the french version but i think it's : )
-"Client Support" and select : Restauration ( or something like that )
-Enter your IMEI and SN.
Good luck.

combte said:
Hi, i got the same problem and i succes to fix it.
First, connect you O3D with the usb cable on your computer and go on recovery mod ( seach on google how to do this )
After, go on LG Update and select this option :
( i'm french and i use the french version but i think it's : )
-"Client Support" and select : Restauration ( or something like that )
-Enter your IMEI and SN.
Good luck.
Click to expand...
Click to collapse
thanks i was able to fix my optimus 3d too
it was stuck in clockworkmod recovery.
over here i found out how to get the phone into serial usb mode (volume up and power for like 6sec)
and was able to use the official emergency recovery from lg update software.
thanks alot lg and everybody else

Please help:bootloop Iget Blackview a7 (eu gold version)

Hello everyone,
as its said in title i managed to f*** up my device and cant get out of bootloop.
to explain more ill give some hopefully inportant details:
This was my first root attempt ever(meant without apps like kingroot,kingoroot etc.)
I succesfuly got to unlock bootloader and with fastboot i achieved getting TWRP on it,
after change of twrp language i rebooted the phone(the tutorial i read said to do it)
This is the part when i start to f*** up
My phone rebooted and said :
*Orange Code:
Your device is unlocked and can`t be trusted
Your device will boot in 5 seconds. *
... My first idea was that maybe i was supposed to lock the bootloader back so i did that,that resulted in red code with similiar message about something being off and phone rebooting,so i unlocked it back cause orange > red ,then i googled and discovered that i was supposed to delete all of my data n cache to make sure,so i tried,i got some text about success with cache but data failed with text that it cant find this folder,so i tried to reboot like it didnt said anything about failing(this happens in a lot of software and still manage to somehow workout so i told myself this was the situation),what didnt happen?Orange code again,so i started panic,searched how to restore original rom through fastboot,got some tutorial again telling me to download original rom and file after file flash these,so i tried,it worked until i got to boot.img file,it said that it wasnt boot file at all,so in pure panic and desperateness i procceded to download some recovery.img file in hope that this will do the trick and the original bootloader will recognise it and let me back to my phone,well that was terrible,terrible mistake,now im stuck in bootloop(orange code),cant get into recovery or fastboot by any key shortcut(i tried all i could find up+power,down+power,up+donw+power,just power,nothing works,only thing that happens is that after some time it just shows boot logo and is stuck there)so im desperate,my pc doesnt identify it,fastboot doesnt too,not even adb)so i ask here for help with my sincere pleading and thanks.
Disclaimer:Im sorry if there are some mistakes in text english is not my main language and its my first try to ask for help on technical forum so i hope i didnt done something wrong
Edit:i achieved getting to normal boot logo (seems like kind of random thing will try to get more info how,and in this state its just stuck here doing nothing but device manager recognise it as A7 as it would been normally plugged in exept giving warning (Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)),so that could maybe help that pc recognise its being connected but still nothing further,no fastboot no adb,no sp flash tool