Database Info

Bricked P350

Hello ,
Ive bricked a LG P350me and need a german stock rom (kzl) endig to flash this with the LG flash tool . Any Idea where i can get one ? I´ve found nothing at the whole internet ...
got one http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP350/ASEABK/V10c_00/V10C_00.kdz from LG server , has anyone the shortcut (ASEABK) for a German Rom ? ... got it ... ADEUAP

think the adminz need to bring a new forum for LG Optimus P350 in here !!

I've bricked my LG P350 too. After i use Call+Vol Up+End, I see this on my screen:
Fastboot mode started:
-- suspend --
-- reset --
-- portchange --
-- reset --
-- portchange --
STALL GET_DESCRIPTION 128 6 1006 0 18
fastboot: processing commands
What shall I do? Can anyone help me? What programs can I use to restore it?

I recieved today the same error-message:
I thought my p350 is bricked, but I tried with the following progs/images about 5 or 6 hours and my phone runs now with the custom rom.
-recovery-RA-pecan-2.2.1-GNM-drap.img.zip
-fastbootflasherV2.zip
-Pecamod_v0.5.zip
-install usb-driver for lg first. Don't run LG-Software
-open fastbootflasher
-connect phone via usb (several tries)
-flash recovery (recovery-RA-pecan-2.2.1-GNM-drap.img)
-reboot phone while holding volume down ,send + end buttons, than it will start in recovery mode.
-Install Pecamod_v0.5.zip from phone sd-card.
Good Luck

p350 bricked
I got similar error when I plugged my phone to my pc. It says:
Fastboot mode started:
-- suspend --
-- reset --
-- portchange --
-- reset --
-- portchange -
When not plugged in:
Fastboot mode started:
udc-start()
This is the only forum that tackles this subject/ and was trying to do these steps:
-install usb-driver for lg first. Don't run LG-Software
-open fastbootflasher
-connect phone via usb (several tries)
-flash recovery (recovery-RA-pecan-2.2.1-GNM-drap.img)
-reboot phone while holding volume down ,send + end buttons, than it will start in recovery mode.
-Install Pecamod_v0.5.zip from phone sd-card.
downloaded all of the files from net but unfortunately my pc doesnt detect my p350. I think I have downloaded all of the usb drivers available for my lg phone still no go/
Hey schweitzi67, can you give me a step by step instructions on how you did your recovery? I'd really appreciate it if you will. Thanks in advance.

first of all, since you all can boot into fastboot, NONE of you guys are bricked
and second, heres how to fix your fastboot (now before you continue, remember that you need to replace the lg optimus one files in this link with the files that suit your phone, which is to say that you need to find the kdz file for your phone before you begin this):
http://forum.xda-developers.com/showthread.php?t=1088046
http://forum.xda-developers.com/showthread.php?t=1015332
read through those two links carefully and make sure you know what you are doing because your phone can get bricked if you do something wrong. if you have the slightest doubt go research more

Hi. I tried doing all instructions from the first thread you posted. When everything is ready, plugged my p350, went to command prompt and typed "fastboot erase recovery" but it said "<waiting for device>" I have downloaded lgunited mobile driver from lgsetup (B2CappSetup). What do you think the problem is? Thanks!

joolsthebear said:
Hello ,
Ive bricked a LG P350me and need a german stock rom (kzl) endig to flash this with the LG flash tool . Any Idea where i can get one ? I´ve found nothing at the whole internet ...
got one from LG server , has anyone the shortcut (ASEABK) for a German Rom ? ... got it ... ADEUAP
Click to expand...
Click to collapse
Hey have you found a german rom? I am still searching, but i can´t find any Firmware with ADEUAP regioncode.
Maybe someone know where to get the firmware.
Nice Day

Be careful... I installed kdz wrong and now my phone, it does not work
I heard that can be easily solved if you start downloadmod but I do not know how to do it .... help

sweetnsour said:
first of all, since you all can boot into fastboot, NONE of you guys are bricked
and second, heres how to fix your fastboot (now before you continue, remember that you need to replace the lg optimus one files in this link with the files that suit your phone, which is to say that you need to find the kdz file for your phone before you begin this):
http://forum.xda-developers.com/showthread.php?t=1088046
http://forum.xda-developers.com/showthread.php?t=1015332
read through those two links carefully and make sure you know what you are doing because your phone can get bricked if you do something wrong. if you have the slightest doubt go research more
Click to expand...
Click to collapse
Thank you!! Your first link whas the solution for my problem, it wasn't easy for a noob like me, but it's doable if you follow those instructions very carefully
I'm so happy! thanks again.

my P350 is just dead
Hi Guys,
Have the very same problem here. Tried to flash new ROM, phone entered in yellow emergency screen, got an failed error from KDZ and now the phone is dead.
I can not seem to start it, tried any keys combinations but the phone seems to not respond at all.
If i at least could get into an emergency screen or something but...nothing...black screen and no hearth beat
Is this really the end of it?
Much appreciated for a solution here.

[Q] Bricked LG P505, Emergency Mode

Hello,
I have been searching for three weeks now, and I can't find a solution. My phone has been stuck on the yellow "emergency mode" screen this entire time. I thought it was about time to make a thread, hoping it will help me.
On other forums and threads, people said to use the KDZ updater. I have, but sometimes it spits my phone out saying not found, until I read "use CS_Emergency Mode as a last resort." I did this, and now, even when regularly turning on the phone, its takes me to Emergency Mode, instead of the android screen bootloop. Now, every time, the KDZ updater will say
[R&D Test Tools Log File]
14:42:29 : Launching SW update
14:42:29 : Unpacking KDZ
14:42:30 : KDZ file extraced
14:42:31 : Files were extracted.
14:42:31 : LGMobileDL Load.
14:42:31 : Port = -1
14:42:31 : Connecting to phone
14:42:31 : PHONE WAS NOT FOUND!
14:42:33 : ===FINISHED===
.
I have tried to reinstall the drivers over and over again, but this is always the same result. The LG Mobile Support tool detects my phone, but will always tell my to reboot my phone and try again. This never works. Even the hard reset button combination will not work, it just spits me back to the Emergency Mode.
Please help, Thanks.
(AT&T has already stated that my warranty is void, as I have rooted and modified my ROM.)

Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A

You need to download pc odin and reflash the root kernel. Can you enter download mode?
Sent from my GT-N7000 using XDA

No, download mode does not seem to be working either. Tried that for almost 15 minutes, but took me right back to emergency mode.

Clockworkmod boot loop after OTA update

Hi, this is my first time to post here but i really need help, I installed ClockworkMod Recovery v5.8.4.5 on my LG Optimus L3 E400, I used ROM Manager to install it. but then sometime a while ago, i accidentally selected Update Software on my phone software update option, Now I was stuck at the Clockworkmod recovery screen. I panicked and wipe data factory reset, but still it goes back to CWM. then I tried backup and then restored it afterwards it said restore complete with no error but still goes back to recovery. I also tried KDZ updater with no luck so far. I also tried wiping up everything and restore with no success..Please help

LG E400 ClockWorkMod Recovery Boot Loop
Hello, another android noob here, for 5days stuck with the same problem as TS, and anyone else using the LG (e400) update on CWM atleast v5.8.4.5
* i know this is also discussed in : http://forum.xda-developers.com/showthread.php?t=1610666&page=39, but more centralized would suit this forum, and help a lot of others i think ?
ive tried....
restoring the backup i created with the LG PC Suite software, no luck..
using the lg mobile support tool to restore, error: version not supported !?
installing the following zip's using CWR install from sdcard, except not fixing the boot-loop, the following installed without any problems
stockrom+.zip
stock_recovery_restorer.zip
cm-9-20120831-NIGHTLY-e400.zip
these failed with error:
uninstall-CWR.zip error: error in uninstall-CWR.zip (file on HD seems ok, redownloaded anyway, no change)
CWM-Installer-E400.zip error: installation aborted
LG_E400_Stock_Recovery+MountPoints.zip error: installation aborted
then i tried....
ADB fastboot , after: adb reboot-bootloader , the com4 connection in "xp: devices: ports" disappears, and adb devices + fastboot devices cant find the phone
last 5 lines on phone itself:
udc.start
reset
portchange
reset
portchange
* the phone hasnt crashed at this point, each time when i reconnect the usb it will reset and portchange (twice)
* a few times i got past this, and got:
STALL GET_DESCRIPTOR 128 6 1006 018
reset
portchange
reset
portchange
* since i couldnt install the sdk/extra/google usb drivers (error: contains no info for your hardware), ive tried with these usb drivers:
LGUnitedMobileDriver_S4981MAN36AP22_ML_WHQL_Ver_3.6.exe
LGUnitedMobileDriver S4981MAN37AP22 ML WHQL Ver 3.7.2.exe
* adb interface in devices shows: AndroidNet Sooner Single ADB interface
then i tried the KDZ_FW_UPD.exe option to flash : V10I_00.kdz , didnt work
found another KDZ option for lg (LgFlashPackacge) on acidhazardRom with: UpTestEX_mod2_marwin.exe, that also didnt work
both end with (loose translation from dutch) : error in MOD UpTextEx MFC Application, program terminated
ive also been reading: http://forum.xda-developers.com/showthread.php?t=1186406&page=5
* the battery loading animation hasnt been showing since the cwr boot-loop started
thinking about trying a new xp install (Again), but im hoping there is some fault in my previous work, or something else i didnt try !?
im about to give up on this and send the phone to LG, but that would feel like a defeat

LG e400 Boot Loop after LG Update
ive tried the options again...and wrote down some more info, i also reinstalled a clean XP : SP3 (incl all updates, except powershell)
installed: LG Mobile support tool incl designated lg drivers
it all looks fine, connects and will detect the phone model, but when "checking software version"
(still in the analysis screen) it stops with "Software update is not supported for this model"
*im guessing thats because of the cwm recovery ?
ADB Fastboot
installed: java - jre-7u5-windows-i586-iftw.exe
adb devices will only show my lg when in recovery menu
adb reboot-bootloader
the screen starts with: USB Init , then a lot of data pases like userdata, persist, cache and tombstones
(they all share status 0x0 <- if that means anything to anyone ?)
fastboot erase recovery and fastboot flash recovery recovery.img both end with [waiting for device]
fastboot devices, produces nothing (not even an error)
KDZ
edit: with msxml 4.0 SP3
once i plug in the usb the phone will show the LG logo, i cant mannualy put it in emergency mode
ive tried using kdz on the lg-logo and cwm recovery screen, i also tried Diag and Emergency modes,
the whole process always looks fine, there are no error lines in the logs, althoug it doesnt seem like a problem,
there is only one blank line:
Param : moduleDir =
all logs end with:
23:00:27 : Step Complete : UPDATE FINISHED!
23:00:27 : ResetStartInfo() Call
23:00:27 : _DetachDLL Call
23:00:27 : _DetachDLL Call End
23:00:27 : FreeLibrary Call
23:00:27 : FreeLibrary Call End
23:00:27 : ResetStartInfo() Call End
23:00:27 : ===FINISHED===
then i get the MOD UpTextEx program terminated error, i can still access the KDZ_FW_UPD.exe till i close the error window
edit: also tried...
- as very 1st step to restore the cwm backup
- adb + kdz under Vista
- lg mobile support tool, emergency mode under support option, gives another version error on entering imei or serial

I just wanna ask ..
Where does your phone stuck? In Clockwork recovery or in the LG's logo screen? What version of windows are you using?

nickocelot said:
Hi, this is my first time to post here but i really need help, I installed ClockworkMod Recovery v5.8.4.5 on my LG Optimus L3 E400, I used ROM Manager to install it. but then sometime a while ago, i accidentally selected Update Software on my phone software update option, Now I was stuck at the Clockworkmod recovery screen. I panicked and wipe data factory reset, but still it goes back to CWM. then I tried backup and then restored it afterwards it said restore complete with no error but still goes back to recovery. I also tried KDZ updater with no luck so far. I also tried wiping up everything and restore with no success..Please help
Click to expand...
Click to collapse
I think you need come back to default Rom Stock of your LG Optimus .After that you can do step by step to update Rom use ClockworkMod Recovery again. If still get error ,you need review the Rom want update for your phone has appropriate or not ?
Good luck.......^^

When i start my phone it will go straight to CWM recovery menu, when i connect to usb when the phone is off it will show lg logo

ClockWorkMod Rom Tools Recovery
ive been working with pc's for over 20years, doesnt matter how you mess up ..theres an easy fix, i was approaching my little LG with the same trust of available tools
ironically, i had installed the Clockworkmod ROM Tools as a safeguard, since i kept reading that its backup was the best
my lesson learned:
since you can backup your stuff and recover with the LG tools, and use other apps for the other functions, theres no point in risking bricking your phone ....when you dont really need it
also im glad i choose to buy an LG since -apparently- i can still send my phone for repair without any costs, considering it all, thats a great service ...almost a miracle
ill keep lurking to see the Cyanogenmod progress, which ill probably install with a multiboot app instead of CWM
feel free to disagree / discuss my opinion

can you please share your back-up please?:crying:

Same problem here! I don't know why on earth I tried to do the OTA update...
exitrecovery.zip didn't help either.... damn
EDIT: Did this: http://forum.xda-developers.com/showthread.php?t=1610666&page=43 and got it working again!!!

The same problem but I didn't no how to fix it!
Hi guys:crying:,
I do have te same problem of you have to but I doesn't know how to fix it.
From google I have found this tread and that's why I've become a member.
All what you guys said, I doesn't understand how t ofix it by myself with the same way too.
Can anybody please tell me a easier way for a beginner as I am?
Thanks already!
Sorry for bad English.

LG AS730 Security Error Recovery

This is in response to LG AS730 (L7 Variant) Rooting / Unbricking / More, http://forum.xda-developers.com/showthread.php?t=2102104. This was a very helpful thread but it has a broken link for the cab firmware. I have found an easier way to fix the security error anyway. Just follow the first two steps and boot your phone into emergency mode (Vol Down + Up / Then plug in USB) with LG support tool running. Click options, upgrade recovery, and it will ask you for a Serial # / Model or MEID #. It will download the correct stuff (im not an expert), and install it on the phone. Boots right up. The reason i got into this mess was because I un-installed the wrong apps after I rooted. I didn't heed the warnings of others, i think it was chrome but I'm not sure. Anyway I just wanted to put this out there to save some hassles if any one else has done this.

Please help:bootloop Iget Blackview a7 (eu gold version)

Hello everyone,
as its said in title i managed to f*** up my device and cant get out of bootloop.
to explain more ill give some hopefully inportant details:
This was my first root attempt ever(meant without apps like kingroot,kingoroot etc.)
I succesfuly got to unlock bootloader and with fastboot i achieved getting TWRP on it,
after change of twrp language i rebooted the phone(the tutorial i read said to do it)
This is the part when i start to f*** up
My phone rebooted and said :
*Orange Code:
Your device is unlocked and can`t be trusted
Your device will boot in 5 seconds. *
... My first idea was that maybe i was supposed to lock the bootloader back so i did that,that resulted in red code with similiar message about something being off and phone rebooting,so i unlocked it back cause orange > red ,then i googled and discovered that i was supposed to delete all of my data n cache to make sure,so i tried,i got some text about success with cache but data failed with text that it cant find this folder,so i tried to reboot like it didnt said anything about failing(this happens in a lot of software and still manage to somehow workout so i told myself this was the situation),what didnt happen?Orange code again,so i started panic,searched how to restore original rom through fastboot,got some tutorial again telling me to download original rom and file after file flash these,so i tried,it worked until i got to boot.img file,it said that it wasnt boot file at all,so in pure panic and desperateness i procceded to download some recovery.img file in hope that this will do the trick and the original bootloader will recognise it and let me back to my phone,well that was terrible,terrible mistake,now im stuck in bootloop(orange code),cant get into recovery or fastboot by any key shortcut(i tried all i could find up+power,down+power,up+donw+power,just power,nothing works,only thing that happens is that after some time it just shows boot logo and is stuck there)so im desperate,my pc doesnt identify it,fastboot doesnt too,not even adb)so i ask here for help with my sincere pleading and thanks.
Disclaimer:Im sorry if there are some mistakes in text english is not my main language and its my first try to ask for help on technical forum so i hope i didnt done something wrong
Edit:i achieved getting to normal boot logo (seems like kind of random thing will try to get more info how,and in this state its just stuck here doing nothing but device manager recognise it as A7 as it would been normally plugged in exept giving warning (Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)),so that could maybe help that pc recognise its being connected but still nothing further,no fastboot no adb,no sp flash tool