Hello,
i have a problem, i need to flash baseband ( http://forum.xda-developers.com/showthread.php?t=1149530 ) on my LG.
But LGMDP.exe doesn't shows my phone on Select port. But ONLY LGMDP.exe. I have usb debugging enabled.
So what can I do that it shows my phone, so I finally can flash baseband?
Hope you can help me fast.
Thanks.
Yours sincerely,
LegendZz
Have you installed LG Drivers
Sent from my GT-I9082 using xda premium
Yes, I have installed LG Drivers, PC Suite and so on, but dont work
Have you disabled lg modem from control panel>properties in your PC? After disabling, reboot PC & then connect phone.
Sent from my LG-P500
pmvyas said:
Have you disabled lg modem from control panel>properties in your PC? After disabling, reboot PC & then connect phone.
Sent from my LG-P500
Click to expand...
Click to collapse
Yes I have, but still don't work
Now I tried to install Gingerbread 2.3.3 official with KDZ Updater, but also this one says ' PHONE WAS NOT FOUND '
LegendZz said:
Yes I have, but still don't work
Now I tried to install Gingerbread 2.3.3 official with KDZ Updater, but also this one says ' PHONE WAS NOT FOUND '
Click to expand...
Click to collapse
for people, like me also, that LGMDP doesn't show device, you need to have installed LG drivers, disabled LG modem from device manager, reboot into recovery, conect phone to pc, go to advance/mounts and mount USB, that shoud make LGMDP show the device(maybe it will take some little time to detect it and instal drivers), from LGMDP select country and language, carrier, phone model and shoud see if there are updates for it and install them and after all is done reboot
AND DO NOT TRY TO UPDATE TROUGH KDZ BECAUSE ALOT OF PEOPLE HAD HARDBRICKED THEYR PHONES (USING KDZ IS NOT FOR EVERYBODY), ONLY USE LGMDP,
AN IF YOU EVENTUALY USED KDZ AND GAVE YOU ERROR, DO NOT PULL OUT BATTERY, JUST RETRY AGAIN UNTILL IS ALL DONE OK,
IF ALSO, YOU WILL NEED TO GET YOUR DEVICE TO THE REPAIR SHOP AND THAT IS NOT FOR FREE, OR IN THE WORST CASE YOU WILL NEED A NEW PHONE
Hello guys.
My problem is that I was trying to modify my device with this guide > http://forum.xda-developers.com/showthread.php?t=1540163 ([Guides & Tools] Modifying Your Phone) and for that i download this KDZ "V20P_00.kdz - Official AT&T Gingerbread" bc is the only one that is activated, I followed the steps how it says and when my device was already flashed with the LG Flash Tools I tried to turn it on and it didnt work, literally my phone is dead. I tried to put it on S/W mode and my computer does not recognize it, its like i connect and disconnect my phone from the USB port, my pc cant installs the drivers.. So i searched some solution and i found the SmartFlash Tool, I tried with that too and guess what... NOTHING so I need some help in here :s
Dear All,
I guess i soft brick my G Pro 2, after power on, the phone hang at the LG logo. tried download mode and use LG Flash Too 2014 to flash, it keep showing this error,
"Upgrade stop due to an error" (please refer to attached image)
Is my G Pro 2 dead? Please kindly help.
Thanks.
kongming said:
Dear All,
I guess i soft brick my G Pro 2, after power on, the phone hang at the LG logo. tried download mode and use LG Flash Too 2014 to flash, it keep showing this error,
"Upgrade stop due to an error" (please refer to attached image)
Is my G Pro 2 dead? Please kindly help.
Thanks.
Click to expand...
Click to collapse
Hi,
I faced this issue a few times during flashing the stock ROM. I'll tell you what i did. Try it maybe it'll help. As far as i know as long as you can get to "download mode" your phones not dead.
0) First download the correct drives. (if already installed . Reinstall the drivers)
1)DO NOT CONNECT PHONE. And enter Download mode.
2) Then start the LG Flash tool 2014 "make sure that the kdz file is in the same folder as the LG flash tool application.
3) When the tool starts, connect the phone and follow procedure upto the 3rd screen (after clicking Start) ((Also make sure all options have been set correctly like CDMA and DIAG and CSE Flash. ))
4)The start the flash process.
**If youve done exactly the same, restart computer. Change the USB cable(if using any other than LG) and change USB port.
And then try the entire procedure again.
I think basically what worked for me was reinstalling the driver waiting for the device to be detected and changing the USB port.
Let me know if it works or if you need any help with links. All the best:good:
P.S::
Download and setup LG Driver : http://www.mediafire.com/download/g3...Ver_3.11.3.exe
Download LG Flash Tool 2014 tool and extract :
http://www.mediafire.com/download/fw..._Tool_2014.zip
hi,
sorry for this but please help me? i had my gp2 for 2 years now then recently i decided to change its dpi then it happen it wont boot anymore. i was aware that this might happen but still i never had 2nd thought of doing it since i can always flash a new kdz and never install a custom recovery on it. I can still enter the download mode but the big problem is that it cant be detected by the computer i tried to give it a try on my friends computer and install the driver too but i have no luck still it cant be detected. So now my big problem is i can't flash a new kdz because of that. It fail to install LGE Android MTP Device driver and when i try to updated the driver manually it also fail with reason of Code 10. Please someone help me because ive been searching for days now on how can i make GP2 to be detected again and flash new kdz and revive it again.
Thank you in advance.
somebody help me please?
Guys I'm having some issues with my lg g2 again. I'm from Pakistan and recently my phone was working fine until it started to restart on lg logo. I decided to flash it to stock,and somehow i managed to do it by doing stuff and deleting and reinstalling lgup but now my laptop doens't recognize my device in "LGE MTP ANDROID DEVICE" and the driver fails to install. My phone is bricked because of using bootstack with cloudyg2 rom,don't make the mistakes like i did. LGUP doesn't recognize my phone now and i tried alot. LG flash tool doesnt work and tot method cant work because my lg is korean. Any help?
mustfafafakhar said:
Guys I'm having some issues with my lg g2 again. I'm from Pakistan and recently my phone was working fine until it started to restart on lg logo. I decided to flash it to stock,and somehow i managed to do it by doing stuff and deleting and reinstalling lgup but now my laptop doens't recognize my device in "LGE MTP ANDROID DEVICE" and the driver fails to install. My phone is bricked because of using bootstack with cloudyg2 rom,don't make the mistakes like i did. LGUP doesn't recognize my phone now and i tried alot. LG flash tool doesnt work and tot method cant work because my lg is korean. Any help?
Click to expand...
Click to collapse
Greetings and welcome to xda. If you ask your question here
http://forum.xda-developers.com/lg-g2/help
the experts there will be able to help you
Good Luck
Sawdoctor