[Completed] Softbricked lg g2 - XDA Assist

Guys I'm having some issues with my lg g2 again. I'm from Pakistan and recently my phone was working fine until it started to restart on lg logo. I decided to flash it to stock,and somehow i managed to do it by doing stuff and deleting and reinstalling lgup but now my laptop doens't recognize my device in "LGE MTP ANDROID DEVICE" and the driver fails to install. My phone is bricked because of using bootstack with cloudyg2 rom,don't make the mistakes like i did. LGUP doesn't recognize my phone now and i tried alot. LG flash tool doesnt work and tot method cant work because my lg is korean. Any help?

mustfafafakhar said:
Guys I'm having some issues with my lg g2 again. I'm from Pakistan and recently my phone was working fine until it started to restart on lg logo. I decided to flash it to stock,and somehow i managed to do it by doing stuff and deleting and reinstalling lgup but now my laptop doens't recognize my device in "LGE MTP ANDROID DEVICE" and the driver fails to install. My phone is bricked because of using bootstack with cloudyg2 rom,don't make the mistakes like i did. LGUP doesn't recognize my phone now and i tried alot. LG flash tool doesnt work and tot method cant work because my lg is korean. Any help?
Click to expand...
Click to collapse
Greetings and welcome to xda. If you ask your question here
http://forum.xda-developers.com/lg-g2/help
the experts there will be able to help you
Good Luck
Sawdoctor

Related

[Completed] LG G3 (Sprint)USB connect problem ((stuck in fastboot/no donwload mode))

Hello everyone i need help!
I have LG G3 Sprint(LS990), its a long story how i get into this problem so ill be short.
I flashed my phone few times and got bricked my phone. now i stuck on LG logo loop it continuously shows me LG logo. Recovery and Download modes not working anymore so i cant flash a ROM right now. after few days of researching i find the way how to make download mode work with laf.img i got everything i need LG driver installed , adb installed on my computer and i got that laf.img for lg g3 ls990 the only problem right now i have is that i can't connect my LG to PC, windows doesn't see any changes in device manager when i connect cable.
So here is the question: how can i make my Phone connect to PC while im stuck in fastboot. (i already tried few different Windows PC and Linux also used 5 different cables starting from original one end with other phone cables but still can't make my LG get connected to PC so i can flash a laf.img file to make my download mode work. If you have any other solution ill be happy to accept and try it. Hope for quick response, as its the only phone i got at the moment and its been a few days already that i don't have phone, so my friends start think that im dead or lost already :crying:
P.S sorry for poor English
Hello and welcome to XDA Assist.
Go HERE and post a thread there and I'm sure the Sprint G3 experts will help you there
Good Luck!

[HELP!!!] My GP2 wont boot and usb driver fail to install

hi,
sorry for this but please help me? i had my gp2 for 2 years now then recently i decided to change its dpi then it happen it wont boot anymore. i was aware that this might happen but still i never had 2nd thought of doing it since i can always flash a new kdz and never install a custom recovery on it. I can still enter the download mode but the big problem is that it cant be detected by the computer i tried to give it a try on my friends computer and install the driver too but i have no luck still it cant be detected. So now my big problem is i can't flash a new kdz because of that. It fail to install LGE Android MTP Device driver and when i try to updated the driver manually it also fail with reason of Code 10. Please someone help me because ive been searching for days now on how can i make GP2 to be detected again and flash new kdz and revive it again.
Thank you in advance.
somebody help me please?

LG e615 Flash Stock Rom Boot Loop Issue.

Require Help...i am trying to flash stock rom on lg optimus L5 e615.....tried kdz updater it shows an error that phone was not found even tried lg support tool but still problem persist...
Plz if anyone can give a solution to this...phone when got into bootloop the usb debugging option was disabled...an now i dont have any way that it turns back on again?i think so this may be causing the issue but not sure...please help
Do you have usb drivers installed for your model? Download and install them, put the device into download mode let the drivers installation complete.. And then use lg flash tool.
Thks for rply... I have tried all usb drivers even on lg flash tool its working but sonehow when started for nornal flash it shows connecting and then it shows no device was found end.
Plz can u provide me with proper driver cause on every sites there sone or tge other vers of lg united Mobile driver
Can u plz guide me or provide a link which shows all steps correctly with working links of drivers and kdz updater plz..

LG G3 D855 32 GB won't turn on after flasing stock rom

Hi
I had the standard kitkat factory rom installed in my g3.I rooted the phone installed the twrp recovery, everything worked fine. Then I downloaded the stock lollipop rom for lg g3 d855 and flashed it through the TWRP recovery. During installation it formated the previous system. I rebooted the phone and from that moment it is not turning on. In removed the battery several times, tried to charge it , it shows no response. When I connect it with a computer then a com port is added in the device manager which shows phone is showing some response.
kindly help me regarding this issue.
Thank You
aeroexpert said:
Hi
I had the standard kitkat factory rom installed in my g3.I rooted the phone installed the twrp recovery, everything worked fine. Then I downloaded the stock lollipop rom for lg g3 d855 and flashed it through the TWRP recovery. During installation it formated the previous system. I rebooted the phone and from that moment it is not turning on. In removed the battery several times, tried to charge it , it shows no response. When I connect it with a computer then a com port is added in the device manager which shows phone is showing some response.
kindly help me regarding this issue.
Thank You
Click to expand...
Click to collapse
Did you do a full wipe before you flashed? Can you access TWRP? Can you access Download Mode? Please provide more info. Although I know nothing about unbricking devices, maybe someone with the right experience can help you, but you should give as much info and details as possible.
If you can still access in TWRP you can flash a custom ROM
Sent from my ALCATEL ONE TOUCH 6040D using XDA-Developers mobile app
joe2k01 said:
If you can still access in TWRP you can flash a custom ROM
Sent from my ALCATEL ONE TOUCH 6040D]
Click to expand...
Click to collapse
Well I did not wipe before installing new firmware through TWRP
Now phone is hard bricked,
It can't go to twrp, no recovery, no dowload or fastboot mode, Phone won't turn on and is recognized as LGE AndroidNet USB Serial Port in my laptop.
aeroexpert said:
Well I did not wipe before installing new firmware through TWRP
Now phone is hard bricked,
It can't go to twrp, no recovery, no dowload or fastboot mode, Phone won't turn on and is recognized as LGE AndroidNet USB Serial Port in my laptop.
Click to expand...
Click to collapse
Maybe you should try this: http://appsandtips.blogspot.co.il/2015/11/how-to-hard-unbricked-lg-g3-all-variants.html?m=1
This tutorial also seems nice: http://www.androidbrick.com/unbrick-recover-your-dead-lg-g3-g2-all-variants/
Good luck and hope you'll unbrick it successfully. Anyway you got nothing to lose I guess...
Sent from my LG G3 D855 running stock Lollipop v21a.
I have Opened my LG g3, did the steps as mentioned, now i am stuck in Borad Diag app which shows following error during test,
No response from the device, Check PMIC First and if still boot problem, replace AP ,
Do you know what should I do to fix it ?
Thank You
Sent from my ALE-L21 using XDA-Developers mobile app
aeroexpert said:
I have Opened my LG g3, did the steps as mentioned, now i am stuck in Borad Diag app which shows following error during test,
No response from the device, Check PMIC First and if still boot problem, replace AP ,
Do you know what should I do to fix it ?
Thank You
Sent from my ALE-L21 using XDA-Developers mobile app
Click to expand...
Click to collapse
As I said earlier, I have no experience with unbricking. However, what is your PC operating system (maybe windows 10 do problems?), do your device appear as qualcomm 9008 in the device manager?
Sent from my LG G3 D855 running stock Lollipop v21a.
Thank You, I am on WIN 10, that is not a problem , I shall see what I can do, May be I shall use LG Smart Boot Diagnostics Tool
Sent from my ALE-L21 using XDA-Developers mobile app

Help with unbricking a hardbricked H631

Long story short, a kdz flash may have been interrupted. Now I am unable to boot my stylo at all. I can however see it under device manager, where it is labeled "Qualcomm HS-USB QDLoader 9008". Is there anything I can do to fix this?
I bricked mine and used LG Bridge to get to Lollipop and then I took the OTA to Marshmallow
Also, LG UP method can be used as well.
tube517 said:
I bricked mine and used LG Bridge to get to Lollipop and then I took the OTA to Marshmallow
Also, LG UP method can be used as well.
Click to expand...
Click to collapse
I kinda am stuck in this position too. Does LG bridge pick it up in this mode? Did you have that problem? I've been trying and it seems the only thing I can find is QPST using QFIL but then I can't seem to transfer the data and get an error about Sahara not being able to transfer the data over.
MrObvious said:
I kinda am stuck in this position too. Does LG bridge pick it up in this mode? Did you have that problem? I've been trying and it seems the only thing I can find is QPST using QFIL but then I can't seem to transfer the data and get an error about Sahara not being able to transfer the data over.
Click to expand...
Click to collapse
I have the MetroPCS version and totally screwed up messing around with something. I had no recovery. I had to use one of the methods to get it back up and running.
If you have the Tmobile or Metro version, you should be fine.
Did you have the same QDLoader 9008 issue?
LG Bridge doesn't appear to be working for me as it's not even detected.
Try LG Flash tool. That can get you back to Lollipop.
http://androidcreations.weebly.com/lg-g-stylo-update.html
Or LG UP method should work.
http://www.mylgphones.com/t-mobile-lg-g-stylo-h631-how-to-unrick-restore-back-to-stock.html (This is for the Tmobile version)
I can't actually access download mode, meaning neither of those options can detect my phone.
Wonkit said:
I can't actually access download mode, meaning neither of those options can detect my phone.
Click to expand...
Click to collapse
LG UP has an option that does not require download mode
I can't get LG UP to detect my device at all.
MrObvious said:
I can't get LG UP to detect my device at all.
Click to expand...
Click to collapse
Use a different USB cable. That's what happened to me. I had to try every single USB cable in my house, even from other phones.
AFAIK, in order to fix a hard bricked (Qualcomm HS-USB QDLoader 9008) lg stylo we need make something like this (http://forum.xda-developers.com/lg-...nbrick-g-stylo-ls770-qualcomm-hs-usb-t3368269) but for the H631/MS631 variant.
Can some of you look at THIS method used on LG V10 TMO variant for unbricking Qualcomm 9008?
I posted a thread HERE with the instructions from the user that created the backup and method to unbrick.
Hi, have the same qualcomm 9008 issue aftet kdz, so is there any solution?
So the brick is so bricked you can't even get to download mode.
Lg h631 hardbricked
Please any solution yet on this thread? I have had the same issue for a year now.
LGMS631 (MetroPCS LG G Stylo) Root/Unbrick/Recovery
So, I think I've managed to salvage my bricked Stylo, I somehow also managed to root my Fiance's LG G Stylo that's on the 6.0 update...
Since I can't find any ways to fix this problem on the internet I'll post what I did here so hopefully I can get some other people out of deep water with their phone.
Here is the thread I made I don't think it will work for a hardbrick, but it might be worth a shot..
LGMS631 MetroPCS LG G Stylo Backup (Unbrick/Root) Android 6.0
That won't work because your phone still works. You can boot past the 9008 mode.
So basically the phone is useless and can't be brought back to life at this point
I'm in the same position, flashed a lollipop kdz on a marshmallow and it effectively trashed the emmc. Without an insider leaking signed programmer and flasher mbns, flashing via sahara is not possible. For the moment, you need one of those expensive 20pin JTAG boxes and documentation for the ISP points(I can't find this info, it's paywalled). Under the shield facing the back of the phone is a header that may be for JTAG, but I haven't bothered probing as I don't think it's practical for unbricking.

Categories

Resources