Database Info

[Q] need emergency very quick help, KDZ error !

Now, while updating my phone via KDZ it showed error:
Upgrade Error
WParam : 100
LParam: 1002.
I tried many variations (CDMA, 3GQCT / CS_emergency, emergency..) but nothing, the same error.
The phone is now in emergency mode, and i know, if i will try to disconnect phone from pc it will be bricked, what to do ???
I would be very happy if someone could help me
EDIT: Can moderators add SOLVED to this thread ?

ashirviskas said:
Now, while updating my phone via KDZ it showed error:
Upgrade Error
WParam : 100
LParam: 1002.
I tried many variations (CDMA, 3GQCT / CS_emergency, emergency..) but nothing, the same error.
The phone is now in emergency mode, and i know, if i will try to disconnect phone from pc it will be bricked, what to do ???
I would be very happy if someone could help me
Click to expand...
Click to collapse
ALSO, my system is windows 7. LGE Virtual Modem and LGE Android Platform USB Modem are disabled

try again this time with 3gqct with admin.
Sent from my LG-P500

also enable usb debugging. that step is important
Sent from my LG-P500

allenwalker1998 said:
try again this time with 3gqct with admin.
Sent from my LG-P500
Click to expand...
Click to collapse
I am using Run as admin. But thanks (And phone is in emergency now)
By the way i attached logs, the first on is the longest, others 7 are same like the second so i added only first and second
EDIT: First log is too big, so here it is: http://www.2shared.com/document/wgs6hsIH/KDZ_FW_UPD_log00.html

is it a korean p500? i suggest updating ur usb drivers
Sent from my LG-P500

allenwalker1998 said:
is it a korean p500? i suggest updating ur usb drivers
Sent from my LG-P500
Click to expand...
Click to collapse
No, it is normal LG-P500, drivers are installed.

ashirviskas said:
No, it is normal LG-P500, drivers are installed.
Click to expand...
Click to collapse
Now downloading V20C_00.kdz.
EDIT:
Nope, not working and this one

So, i left my phone overnight plugged to charger to do not exit emergency mode, ut now heres another problem. I reinstalled windows ( now i have xp) but it does not recognizes my phone, i tried many drivers, but still the phone is not showing in the devices. The only drivers i have are LGE modem, and LGE bluetooth TransPort. Any drivers or tutorials will be accepted, thanks
(And sorry for my english)

ashirviskas said:
So, i left my phone overnight plugged to charger to do not exit emergency mode, ut now heres another problem. I reinstalled windows ( now i have xp) but it does not recognizes my phone, i tried many drivers, but still the phone is not showing in the devices. The only drivers i have are LGE modem, and LGE bluetooth TransPort. Any drivers or tutorials will be accepted, thanks
(And sorry for my english)
Click to expand...
Click to collapse
its somewhere here in forum.. search for it..
probably try the fastboot thread..

shake ur fone and remove the battery then connect ur fone to pc without battery and then try kdz updater.. it will be sorted out
if first tym it didn't work then give it 2-3 tries it will work surely
Sent from my LG-P500 using xda premium

ccdreadcc said:
its somewhere here in forum.. search for it..
probably try the fastboot thread..
Click to expand...
Click to collapse
None of the drivers are workng...

if you are still in emergency mode, just go into kdz updater, and put the settings at 3GQCT and the State as emergency. then just launch software update. And btw if you wouldve stayed on windows 7 it wouldve been okay, ive used kdz updater about 7 times already and each time owrked.
For in depth guide, idk if you already read this but heres the link
http://forum.xda-developers.com/showthread.php?t=1060121

P500T1 said:
if you are still in emergency mode, just go into kdz updater, and put the settings at 3GQCT and the State as emergency. then just launch software update. And btw if you wouldve stayed on windows 7 it wouldve been okay, ive used kdz updater about 7 times already and each time owrked.
For in depth guide, idk if you already read this but heres the link
http://forum.xda-developers.com/showthread.php?t=1060121
Click to expand...
Click to collapse
Thanks to all, but nothing worked. Now my computer doesn't even recognize that i am connecting my phone. even device manager isn't refreshing when i m connecting my phone to pc... Same on another computer (Laptop, win7, 64-bit). will try to remove battery, hope this will not brick my phone

abhinav quietly brilliant said:
shake ur fone and remove the battery then connect ur fone to pc without battery and then try kdz updater.. it will be sorted out
if first tym it didn't work then give it 2-3 tries it will work surely
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Just removed battery. BRICKED. Well, i think i will have to do some pause at androids....

ashirviskas said:
Just removed battery. BRICKED. Well, i think i will have to do some pause at androids....
Click to expand...
Click to collapse
I will do nothing for you but to suggest you that never ever flash a gb rom via kdz (v20*) it will lead ur phone to brick.. always flash v10e rom via kdz rather then other one.........
By the way have you tried flashing v10* roms at that time in the emergency mode....
Press THANKS if I help you..!!
Sent from my [email protected] OpTiMu$ On€ [email protected]

yeah try flashing a froyo.. i have this type of brick once before n by removing battery, shaking fone and then using kdz worked for me
Sent from my LG-P500 using xda premium

ashirviskas said:
So, i left my phone overnight plugged to charger to do not exit emergency mode, ut now heres another problem. I reinstalled windows ( now i have xp) but it does not recognizes my phone, i tried many drivers, but still the phone is not showing in the devices. The only drivers i have are LGE modem, and LGE bluetooth TransPort. Any drivers or tutorials will be accepted, thanks
(And sorry for my english)
Click to expand...
Click to collapse
You had to DISABLE lge Modem, as that causes soft bricking , like you have now.
GO into my signatures link and look up how to flash kdz properly, with all the links attached, as well as how to get out of emergency mode. My guide should just be made sticky, as it has the compilation of all the kdz, emergency procedures, rooting guides into one, as ive lost count how many times I had to tell someone how to do the above things.

Go to emergency mode flash recovery using lgmdp and install any custom rom.this is better then kdz.
Sent from my LG-P500 using Tapatalk 2

vikasb32 said:
Go to emergency mode flash recovery using lgmdp and install any custom rom.this is better then kdz.
Sent from my LG-P500 using Tapatalk 2
Click to expand...
Click to collapse
you cant get into recovery when its in emergency mode, emergency mode = bootloader, which is before recovery.
Lgmdp is not better then KDZ, dont talk s***, just because its your opinion.
Id the OP is not sure, use google and research for him/herself, but kdz can be used to get out of emergency mode, I have a link to the thread in my sig, for that purpose, its very easy, but dont forget to plug ur phone into another USB port, or re-install your LG drivers and disable LGE modem, as that was most likely the original cause of your problem.

[HELP] Bricked LG-P500 by ROM manager

i have following problems with my bricked lg-p500
1)stuck at lg logo
2) Unable to go in emergency mode
3)Unable to flash stock ROM with kdz
plz ......plz.....help
its urgent
reply......waiting...

abhi007 said:
i have following problems with my bricked lg-p500
1)stuck at lg logo
2) Unable to go in emergency mode
3)Unable to flash stock ROM with kdz
plz ......plz.....help
its urgent
reply......waiting...
Click to expand...
Click to collapse
I had same problem. I tried to unbrick my phone via KDZ. But unfourtunatelly i got ful brick . So i do not recommend you using KDZ. NEVER.

http://forum.xda-developers.com/showthread.php?t=1793031
Try that with phone in lg logo if you cant go to emergency mode kdz is a phone killer lol. It wprks for others try it.
Sent from my LG-P500 using xda app-developers app

lipe082 said:
http://forum.xda-developers.com/showthread.php?t=1793031
Try that with phone in lg logo if you cant go to emergency mode kdz is a phone killer lol. It wprks for others try it.
Sent from my LG-P500 using xda app-developers app
Click to expand...
Click to collapse
Where have you been when i needed you? : http://forum.xda-developers.com/showthread.php?p=29683034 LOL
(And i accidently thanked you, weanted to press more info )

Gess i didnt see sorry when you get your phone back any help needed just ask and you can press more thanks lol just joking
Sent from my LG-P500 using xda app-developers app

FInallly.....after....updating...mobile...drivers...i...flash ....stock ..rom....
thnks....to......allllll

abhi007 said:
FInallly.....after....updating...mobile...drivers...i...flash ....stock ..rom....
thnks....to......allllll
Click to expand...
Click to collapse
What have you used? I am asking because i think i will face this problem as i am such a noob with KDZ (If you used KDZ and it worked then i am really sorry for that my comment i posted earlier :cyclops: )

the only time i use .kdz was a pain in the ass only after than more 10 tries finaly phone conect its not your fault kdz is unstavel LGMDP is by far more stable.

ashirviskas said:
What have you used? I am asking because i think i will face this problem as i am such a noob with KDZ (If you used KDZ and it worked then i am really sorry for that my comment i posted earlier :cyclops: )
Click to expand...
Click to collapse
i used latest drivers from B2c and Kdz...updater...

a chance of recovery
abhi007 said:
i have following problems with my bricked lg-p500
1)stuck at lg logo
2) Unable to go in emergency mode
3)Unable to flash stock ROM with kdz
plz ......plz.....help
its urgent
reply......waiting...
Click to expand...
Click to collapse
If you did something like install custom recovery on your lg optimus one and failed, you would get a black screen saying..
fastboot mode started
udc_start()
If this happens...
Relax.. Your phone is not bricked.. There are many ways to fix it... This method of unbricking should be done as a last resort because it erases all your data...
Charge your phone before proceeding even if the backlight is always on while charging..
Things required:
Kdz updater:
Stock ROM:
Required- 1. USB cable 2. Windows PC with administrator account 3. LG united mobile drivers
1. First Go to My Computer> Right Click & go To properties> Thern Go To Device Manager & disable all LGE modems under modems from Windows device manager in the Control Panel.
2. Make sure you have LG united mobile drivers installed & you have restarted Computer once after installation of drivers.
3. No the trick is here…. press and hold both the back (return) button and the volume up button and simultaneously connect the USB cable.
The phone should light up and say Emergency mode!! in a green background.. If it goes to Emergency mode, it can be fixed... If it doesn't I'm sorry, search for an other forum or give it to the LG service center...
4. Now decompress the KDZ file you downloaded using WinZip, WinRar etc., install msxml.msi from the uncompressed directory and runKDZ_FW_UPD.exe (With administrator rights by right clicking and selecting run as administrator).
In the dialog box, select Type : 3GQCT and PhoneMode: DIAG, select the kdz file and flash the stock ROM... It would take about 15 minutes.. If the kdz updater crashes, change compatibility mode or restart the computer and phone or do something till it works (Retry retry retry)...
For most of you it would probably say PHONE WAS NOT FOUND!.... If so, then follow all the steps said above, again retry for endless times or restart the computer or check if any modem drivers are active or try it in an another computer...

ashirviskas said:
I had same problem. I tried to unbrick my phone via KDZ. But unfourtunatelly i got ful brick . So i do not recommend you using KDZ. NEVER.
Click to expand...
Click to collapse
We had the same problem. It bricked my phone and sadly it was out of warranty. I had to pay to have it JTAGged to function again.

healthhome said:
If you did something like install custom recovery on your lg optimus one and failed, you would get a black screen saying..
fastboot mode started
udc_start()
If this happens...
Relax.. Your phone is not bricked.. There are many ways to fix it... This method of unbricking should be done as a last resort because it erases all your data...
Charge your phone before proceeding even if the backlight is always on while charging..
Things required:
Kdz updater:
Stock ROM:
Required- 1. USB cable 2. Windows PC with administrator account 3. LG united mobile drivers
1. First Go to My Computer> Right Click & go To properties> Thern Go To Device Manager & disable all LGE modems under modems from Windows device manager in the Control Panel.
2. Make sure you have LG united mobile drivers installed & you have restarted Computer once after installation of drivers.
3. No the trick is here…. press and hold both the back (return) button and the volume up button and simultaneously connect the USB cable.
The phone should light up and say Emergency mode!! in a green background.. If it goes to Emergency mode, it can be fixed... If it doesn't I'm sorry, search for an other forum or give it to the LG service center...
4. Now decompress the KDZ file you downloaded using WinZip, WinRar etc., install msxml.msi from the uncompressed directory and runKDZ_FW_UPD.exe (With administrator rights by right clicking and selecting run as administrator).
In the dialog box, select Type : 3GQCT and PhoneMode: DIAG, select the kdz file and flash the stock ROM... It would take about 15 minutes.. If the kdz updater crashes, change compatibility mode or restart the computer and phone or do something till it works (Retry retry retry)...
For most of you it would probably say PHONE WAS NOT FOUND!.... If so, then follow all the steps said above, again retry for endless times or restart the computer or check if any modem drivers are active or try it in an another computer...
Click to expand...
Click to collapse
What. do you not read? people on this thread are telling the OP to not use KDZ. plus he can't even get into emergency mode. so this won't work ? USE LGDMP! DON'T CONFUSE NEWBIES.
AND STOP PASTING THE SAME GUIDE THAT YOU COPIED FROM SOMEWHERE ELSE

[Q] Help, cant flash or root after installing ported SU760

Help, I cant root it nor use lg flash tool because the usb is recognized as cosmo driver and I need to find the driver software.
Also, I cant seem to get signal since I cant use lgflash tool to flash baseband... Any ideas how?
I can access the sd card though. When I remove the battery and pressed the Vol up button, the OMAP driver keep connect and disconnect too and I cant seemed to install it, I'm using windows 7 bytheway.
Baseband is not XBSA404 but instead its the original korean baseband. I can't flash any baseband too.

This doesn't belong here..
However...
Cosmo drivers = omap4430 drivers
so just install the omap drivers like you did before to flash ics.
Edit: for the connect/disconnect problem..
Just keep battery in, hold vol+ and connect usb (hold vol+ until you see s/w)
Sent from my P920 using XBSA ICS V5

Thanks
TMProduct1onZ said:
This doesn't belong here..
However...
Cosmo drivers = omap4430 drivers
so just install the omap drivers like you did before to flash ics.
Edit: for the connect/disconnect problem..
Just keep battery in, hold vol+ and connect usb (hold vol+ until you see s/w)
Sent from my P920 using XBSA ICS V5
Click to expand...
Click to collapse
Thanks, but I cant seemed to install the OMAP Driver even b4 installing ICS. It just says windows cannot find.... I tried doing this manually but still get the same respond. Also when I try to flash back to my original rom, it keep restarting it over and over again at lg logo. The Lg logo last abot halve a sec b4 restarting. So I did reflash back to ICS and it works. But still no network etc...

fadhli7 said:
Thanks, but I cant seemed to install the OMAP Driver even b4 installing ICS. It just says windows cannot find.... I tried doing this manually but still get the same respond. Also when I try to flash back to my original rom, it keep restarting it over and over again at lg logo. The Lg logo last abot halve a sec b4 restarting. So I did reflash back to ICS and it works. But still no network etc...
Click to expand...
Click to collapse
Some tips.
Need to use twrp recovery to install stuff. Cwm uses vol+, twrp vol- to enter recovery(or was it vice versa). Cwm old version doesnt work with xbsa404.
I had brick also, lg logo and reboot. WIn 7 found lg serial port. Used flashtool and change port to 41 or if it is that change to 42.
Then flasher should found lg and flash it.
To get network you need new kernel.

OK!
kalamake said:
Some tips.
Need to use twrp recovery to install stuff. Cwm uses vol+, twrp vol- to enter recovery(or was it vice versa). Cwm old version doesnt work with xbsa404.
I had brick also, lg logo and reboot. WIn 7 found lg serial port. Used flashtool and change port to 41 or if it is that change to 42.
Then flasher should found lg and flash it.
To get network you need new kernel.
Click to expand...
Click to collapse
The thing is when I flash to ICS, my recovery is gone plus after I reflashed to ICS, the phone will froze for a few seconds and then back to normal. This keeps repeating.... Also if ur talking abt rooting, I cant coz it says invalid ap path.

fadhli7 said:
Help, I cant root it nor use lg flash tool because the usb is recognized as cosmo driver and I need to find the driver software.
Also, I cant seem to get signal since I cant use lgflash tool to flash baseband... Any ideas how?
I can access the sd card though. When I remove the battery and pressed the Vol up button, the OMAP driver keep connect and disconnect too and I cant seemed to install it, I'm using windows 7 bytheway.
Baseband is not XBSA404 but instead its the original korean baseband. I can't flash any baseband too.
Click to expand...
Click to collapse
I dont really understand where you stuck exactely and what you did but regarding the cosmo driver:
To install the cosmo drivers for windows xp I downloaded and installed the lg pc suite software ver. 4 something and my phone was connected to the pc under software installation.
For win 7 64bit the driver was automatically installed by windows but you can try lg pc suite with win 7 too.
Sent from my GT-N8000 using XDA Premium HD app

ferel said:
I dont really understand where you stuck exactely and what you did but regarding the cosmo driver:
To install the cosmo drivers for windows xp I downloaded and installed the lg pc suite software ver. 4 something and my phone was connected to the pc under software installation.
For win 7 64bit the driver was automatically installed by windows but you can try lg pc suite with win 7 too.
Sent from my GT-N8000 using XDA Premium HD app
Click to expand...
Click to collapse
Whenever I wanna root my phone, it says cannot find specific file or folder. Plus I can install wkpark boot because I cant install the OMAP driver eventhough I directed it manually. When I tried on other laptop, I managed to successfully install the driver, but it still connect and disconnect ( u can hear by the sound ).

fadhli7 said:
Whenever I wanna root my phone, it says cannot find specific file or folder. Plus I can install wkpark boot because I cant install the OMAP driver eventhough I directed it manually. When I tried on other laptop, I managed to successfully install the driver, but it still connect and disconnect ( u can hear by the sound ).
Click to expand...
Click to collapse
What do you do exactely and what is the error message exactely pls.
For the root you need the lge cosmo driver.
It is correct this wy... connect and disconnect all the time. It means it is ok if you installed the driver.
To install those omap drivers you either needs to be fast to click on them when the ti omap appears or there is a solution to see the already attached devices in thr windows decice list, I saw it somewhere here but i do not remember in which thread.
Sent from my GT-N8000 using XDA Premium HD app

you can get OMAP4430 driver by downloading wkparks fastboot loader from http://forum.xda-developers.com/showthread.php?t=1971014
extract it and you should find it on usb_drv_windows
to install it you can follow this guide http://forum.xda-developers.com/showpost.php?p=32955612&postcount=3 which taken from http://forum.xda-developers.com/showthread.php?t=1942836
good luck

satubsatub said:
you can get OMAP4430 driver by downloading wkparks fastboot loader from http://forum.xda-developers.com/showthread.php?t=1971014
extract it and you should find it on usb_drv_windows
to install it you can follow this guide http://forum.xda-developers.com/showpost.php?p=32955612&postcount=3 which taken from http://forum.xda-developers.com/showthread.php?t=1942836
good luck
Click to expand...
Click to collapse
Yup, I tried installing the driver many times but to no avail... Thanks for the help anyway... :good:

[Q] Problem with OMAP Driver!

Help, I mananged to install the omap driver but it keep connect and disconnect... So now I cant root it or install recover because there's error with the OMAP. I'm currently using ported SU760 for P920. I cant event flash a baseband. When I flash it, the baseband isnt Xball but the original korean baseband. So I seriously need help...

fadhli7 said:
Help, I mananged to install the omap driver but it keep connect and disconnect... So now I cant root it or install recover because there's error with the OMAP. I'm currently using ported SU760 for P920. I cant event flash a baseband. When I flash it, the baseband isnt Xball but the original korean baseband. So I seriously need help...
Click to expand...
Click to collapse
I previously had continuing connect-disconnect cycle. But I managed to install all the drivers and connect to my P920.
It's possible wrong drivers has been installed, try to uninstall them all and restart your PC.
Are you Using Windows 7? try XP.
Make sure that the battery is taken out and you press and hold Volume+ button for several seconds while plugging your USB.
If you open Device Manager you can see OMAP4430- device appearing and disappearing. Try to rightclick on it when it's appearing (takes some practice) and then select properties in popup menu. Then Uninstall device from properties and update drivers to factory LG and Texas Instrumental USB drivers.
If nothing works you might want to try USB JIG cable with 910K resistor.
Good luck!

Thank You ^^D
3dimka said:
I previously had continuing connect-disconnect cycle. But I managed to install all the drivers and connect to my P920.
It's possible wrong drivers has been installed, try to uninstall them all and restart your PC.
Are you Using Windows 7? try XP.
Make sure that the battery is taken out and you press and hold Volume+ button for several seconds while plugging your USB.
If you open Device Manager you can see OMAP4430- device appearing and disappearing. Try to rightclick on it when it's appearing (takes some practice) and then select properties in popup menu. Then Uninstall device from properties and update drivers to factory LG and Texas Instrumental USB drivers.
If nothing works you might want to try USB JIG cable with 910K resistor.
Good luck!
Click to expand...
Click to collapse
Thanks for the help, but I somehow managed to revert back to stock GB though the download mode ( press and hold Volume+ button) is still in korean. Know how to change it back to normal?

fadhli7 said:
Help, I mananged to install the omap driver but it keep connect and disconnect... So now I cant root it or install recover because there's error with the OMAP. I'm currently using ported SU760 for P920. I cant event flash a baseband. When I flash it, the baseband isnt Xball but the original korean baseband. So I seriously need help...
Click to expand...
Click to collapse
i use win7, ICS v30b (xbsall ported ICS rom from su760) and just follow this guide to solve that problem, you also free to try it..
you can get OMAP4430 driver by downloading wkparks fastboot loader from http://forum.xda-developers.com/show....php?t=1971014
extract it and you should find it on usb_drv_windows
to install it you can follow this guide http://forum.xda-developers.com/show...12&postcount=3 which taken from http://forum.xda-developers.com/show....php?t=1942836
good luck :laugh:
one question >>> "When I flash it, the baseband isnt Xball but the original korean baseband" what is the original korean baseband that wrote there???

Big problem.

Hello. I`m new on this forum. Recenlty, i have bought a second hand Optimus 3d. It worked well one week but when i tried to install a custom rom and the phone has broken. I rooted it, then i installed rom manager from google play. When i reboot it to recovery from program it has bricked. I recovery it with lg tool. But now it does`nt recognize the sim. I tried the solutions from other threads but no result. I can`t flash a kdz file. When i enter in the application it says that not responding and it close. Now, lg tool doesn`t work. It didn`t recognize the imei. Tutty didn`t work becouse the the driver doesn`t install. I can use the phone but no service. The wifi doesn`t work well, i can`t download. Sorry for my bad english.

R u on froyo
Sent from my Nexus 4 using xda app-developers app

No, now i have 2.3.5.

Try this
http://forum.xda-developers.com/showthread.php?t=1942836
Install 21E (GB) may be that your emei will be back, otherwise use tutty.
O3d is ubrickable!

What means that the wifi indicator is white instead of beeing green?

sanlenas said:
What means that the wifi indicator is white instead of beeing green?
Click to expand...
Click to collapse
Make sure that sim card is in the correct way . The shaped end is toward the battery.
Connect phone to PC with usb cable, Use lg software updater from lg website to completely reload a new system. Once installed on your pc click update usb drivers and let that load in. Run the updater tool,you have to select rescue phone from the menu. When your phone is recognized put in your imei and the updater will load in ICS (4.0.4). If it stalls at loading 6%, quickly unplug usb and plug it back in.
Good luck.

The program didn`t recognize the imei becouse the phone doesn`t have imei now and i can`t put it becouse the pc don`t install the driver of the device creeated by the code said by tutorial who use tutty.

did you type in your imei number in the imei box and then select the search button. Your imei number is in the battery compartment of your phone.