Database Info

[Q] Is that end of my p-920 ?

Well, I have LG Optimus P-920
since morning working on CM 7 Nightly 23
today I was replaced sdcard to 32GB 10, reboot phone and.... nothing
even pwr+vol up not working, totally not responding
I've tried reflash on LG flash tool but after connect to usb with vol up computer recognize omap4430, thats ok, but that device blinking in device manager, one second is there, one not , no LG USB CDMA serial port
what should I do in that case, please help me

You replaced sd card. Did you try switching back some times s*** messes up. And doing the follow steps you listed. Throw some tips guys. Bump.
Sent from my LG-P925g using XDA App

winb87 said:
You replaced sd card. Did you try switching back some times s*** messes up. And doing the follow steps you listed. Throw some tips guys. Bump.
Sent from my LG-P925g using XDA App
Click to expand...
Click to collapse
switching back ?

You switched sd card? Switch back to the one you had before.
Sent from my LG-P925g using XDA App

winb87 said:
You switched sd card? Switch back to the one you had before.
Sent from my LG-P925g using XDA App
Click to expand...
Click to collapse
switched back, still no response..:/

I posted a thread with the same issue a few weeks back.
No, it's not the end of your phone. You'll need xp/7 to repair the phone (since I'm on linux I can't currently repair it).
Use the LG tool, remove battery and insert it back, plug in usb and hold pwr+volup(or down) can't remember which one. Your PC will find a OMAP4430 device.
There is a few threads how you can repair your phone using emergency mode in the LG tool, you'll need to enter your IMEI etc.. Look in the Development section and look for the right thread.
My thread:
http://forum.xda-developers.com/showthread.php?t=1439373

I've tried that resolution, but t dont works, omap4430 blinking in device manager, cant use lg flash tool

Did you really press the right volume button? I've had that blinking-problem,too, until I pressed the other volume button instead.
And there's no need holding the power-button for doing this.

w8st8 said:
Did you really press the right volume button? I've had that blinking-problem,too, until I pressed the other volume button instead.
And there's no need holding the power-button for doing this.
Click to expand...
Click to collapse
I think...... but I'll try again
trying......still blinking
please give me what should i do step by step, any sequence I tried doesn't work still blinking

Remove battery and blink will stop!

ul71m0 said:
Remove battery and blink will stop!
Click to expand...
Click to collapse
still blinking, even after battery removing

andriu123 said:
still blinking, even after battery removing
Click to expand...
Click to collapse
Try reading this
http://forum.xda-developers.com/showthread.php?p=21096612
good luck

You could get it back andriu? I'm in the same situation, the pc still blinking in any combinations and the driver omap 4430 never installed.
Sorry for my bad english.

vanpe said:
You could get it back andriu? I'm in the same situation, the pc still blinking in any combinations and the driver omap 4430 never installed.
Sorry for my bad english.
Click to expand...
Click to collapse
my english is poor to
about phone, hmm
today he went to service warranity , no solution has helped, i tried everything
we'll see what say service engineers, I hope that will fix him

andriu123 said:
my english is poor to
about phone, hmm
today he went to service warranity , no solution has helped, i tried everything
we'll see what say service engineers, I hope that will fix him
Click to expand...
Click to collapse
You tried to install the drivers from xp? I'll try this before use the warranty.
How much time have your O3D?

tried on XP, Vista, 7
O3d have since about six months

Have you tried different USB cable? Had same problem with Odin and Galaxy S2, odin would fail flashing and not detected sometimes.
Sent from my GT-I9100 using XDA App

MemoryController said:
Have you tried different USB cable? Had same problem with Odin and Galaxy S2, odin would fail flashing and not detected sometimes.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Yes I have tried differents USB cables (3 concretely). I'm desperate.

Once I bricked my phone y recovered it installing all the drivers including the omap one and using the kdz falshing tool.. if the omap chip is still functioning there is still a chance

josuelopezv said:
Once I bricked my phone y recovered it installing all the drivers including the omap one and using the kdz falshing tool.. if the omap chip is still functioning there is still a chance
Click to expand...
Click to collapse
Where do you get the omap drivers? Automatically whit the O3D in emergency mode?
My computer detects that driver but not install it, seems like a bucle try/error/try/error.

[HELP] Bricked LG-P500 by ROM manager

i have following problems with my bricked lg-p500
1)stuck at lg logo
2) Unable to go in emergency mode
3)Unable to flash stock ROM with kdz
plz ......plz.....help
its urgent
reply......waiting...

abhi007 said:
i have following problems with my bricked lg-p500
1)stuck at lg logo
2) Unable to go in emergency mode
3)Unable to flash stock ROM with kdz
plz ......plz.....help
its urgent
reply......waiting...
Click to expand...
Click to collapse
I had same problem. I tried to unbrick my phone via KDZ. But unfourtunatelly i got ful brick . So i do not recommend you using KDZ. NEVER.

http://forum.xda-developers.com/showthread.php?t=1793031
Try that with phone in lg logo if you cant go to emergency mode kdz is a phone killer lol. It wprks for others try it.
Sent from my LG-P500 using xda app-developers app

lipe082 said:
http://forum.xda-developers.com/showthread.php?t=1793031
Try that with phone in lg logo if you cant go to emergency mode kdz is a phone killer lol. It wprks for others try it.
Sent from my LG-P500 using xda app-developers app
Click to expand...
Click to collapse
Where have you been when i needed you? : http://forum.xda-developers.com/showthread.php?p=29683034 LOL
(And i accidently thanked you, weanted to press more info )

Gess i didnt see sorry when you get your phone back any help needed just ask and you can press more thanks lol just joking
Sent from my LG-P500 using xda app-developers app

FInallly.....after....updating...mobile...drivers...i...flash ....stock ..rom....
thnks....to......allllll

abhi007 said:
FInallly.....after....updating...mobile...drivers...i...flash ....stock ..rom....
thnks....to......allllll
Click to expand...
Click to collapse
What have you used? I am asking because i think i will face this problem as i am such a noob with KDZ (If you used KDZ and it worked then i am really sorry for that my comment i posted earlier :cyclops: )

the only time i use .kdz was a pain in the ass only after than more 10 tries finaly phone conect its not your fault kdz is unstavel LGMDP is by far more stable.

ashirviskas said:
What have you used? I am asking because i think i will face this problem as i am such a noob with KDZ (If you used KDZ and it worked then i am really sorry for that my comment i posted earlier :cyclops: )
Click to expand...
Click to collapse
i used latest drivers from B2c and Kdz...updater...

a chance of recovery
abhi007 said:
i have following problems with my bricked lg-p500
1)stuck at lg logo
2) Unable to go in emergency mode
3)Unable to flash stock ROM with kdz
plz ......plz.....help
its urgent
reply......waiting...
Click to expand...
Click to collapse
If you did something like install custom recovery on your lg optimus one and failed, you would get a black screen saying..
fastboot mode started
udc_start()
If this happens...
Relax.. Your phone is not bricked.. There are many ways to fix it... This method of unbricking should be done as a last resort because it erases all your data...
Charge your phone before proceeding even if the backlight is always on while charging..
Things required:
Kdz updater:
Stock ROM:
Required- 1. USB cable 2. Windows PC with administrator account 3. LG united mobile drivers
1. First Go to My Computer> Right Click & go To properties> Thern Go To Device Manager & disable all LGE modems under modems from Windows device manager in the Control Panel.
2. Make sure you have LG united mobile drivers installed & you have restarted Computer once after installation of drivers.
3. No the trick is here…. press and hold both the back (return) button and the volume up button and simultaneously connect the USB cable.
The phone should light up and say Emergency mode!! in a green background.. If it goes to Emergency mode, it can be fixed... If it doesn't I'm sorry, search for an other forum or give it to the LG service center...
4. Now decompress the KDZ file you downloaded using WinZip, WinRar etc., install msxml.msi from the uncompressed directory and runKDZ_FW_UPD.exe (With administrator rights by right clicking and selecting run as administrator).
In the dialog box, select Type : 3GQCT and PhoneMode: DIAG, select the kdz file and flash the stock ROM... It would take about 15 minutes.. If the kdz updater crashes, change compatibility mode or restart the computer and phone or do something till it works (Retry retry retry)...
For most of you it would probably say PHONE WAS NOT FOUND!.... If so, then follow all the steps said above, again retry for endless times or restart the computer or check if any modem drivers are active or try it in an another computer...

ashirviskas said:
I had same problem. I tried to unbrick my phone via KDZ. But unfourtunatelly i got ful brick . So i do not recommend you using KDZ. NEVER.
Click to expand...
Click to collapse
We had the same problem. It bricked my phone and sadly it was out of warranty. I had to pay to have it JTAGged to function again.

healthhome said:
If you did something like install custom recovery on your lg optimus one and failed, you would get a black screen saying..
fastboot mode started
udc_start()
If this happens...
Relax.. Your phone is not bricked.. There are many ways to fix it... This method of unbricking should be done as a last resort because it erases all your data...
Charge your phone before proceeding even if the backlight is always on while charging..
Things required:
Kdz updater:
Stock ROM:
Required- 1. USB cable 2. Windows PC with administrator account 3. LG united mobile drivers
1. First Go to My Computer> Right Click & go To properties> Thern Go To Device Manager & disable all LGE modems under modems from Windows device manager in the Control Panel.
2. Make sure you have LG united mobile drivers installed & you have restarted Computer once after installation of drivers.
3. No the trick is here…. press and hold both the back (return) button and the volume up button and simultaneously connect the USB cable.
The phone should light up and say Emergency mode!! in a green background.. If it goes to Emergency mode, it can be fixed... If it doesn't I'm sorry, search for an other forum or give it to the LG service center...
4. Now decompress the KDZ file you downloaded using WinZip, WinRar etc., install msxml.msi from the uncompressed directory and runKDZ_FW_UPD.exe (With administrator rights by right clicking and selecting run as administrator).
In the dialog box, select Type : 3GQCT and PhoneMode: DIAG, select the kdz file and flash the stock ROM... It would take about 15 minutes.. If the kdz updater crashes, change compatibility mode or restart the computer and phone or do something till it works (Retry retry retry)...
For most of you it would probably say PHONE WAS NOT FOUND!.... If so, then follow all the steps said above, again retry for endless times or restart the computer or check if any modem drivers are active or try it in an another computer...
Click to expand...
Click to collapse
What. do you not read? people on this thread are telling the OP to not use KDZ. plus he can't even get into emergency mode. so this won't work ? USE LGDMP! DON'T CONFUSE NEWBIES.
AND STOP PASTING THE SAME GUIDE THAT YOU COPIED FROM SOMEWHERE ELSE

A little help please..

Well, I'm having a bit of trouble with my phone now..
I tried to reflash XBSall's original ICS using the LGFlash Tool, and after the flashing process, I can't seem to turn on my phone at all.
I get an error that I hadn't encountered when I first flashed ICS onto my phone. You can see the error in the screenshot I have uploaded [Error Screen.JPG]
If anyone has any ideas on how to fix this, that would be great. I am still able to boot into the S/W flash thing (which I also have in my attachments, it's number 1 of the images[DSC_0029.jpg] )
Thanks for the help, XDA. In the meantime, I'll see what else I can do.
I have created a thread about this in the Thrill4G forums, but I know that this forum is more active, so I posted it here as well in order to (hopefully) get more responses. Sorry if this is considered a spam.

Can you boot into recovery? If so, wipe everything and try again.
Are you sure you did all of the steps in the tutorial right?
Did you install the OMAP4430 driver?
Also, did you change the port of the LGE CDMA USB SERIAL PORT to com41 in your device manager?
LG FLASHTOOL TUTORIAL
Some more info about the LG Flashtool
Good Luck Buddy

grish said:
Can you boot into recovery? If so, wipe everything and try again.
Are you sure you did all of the steps in the tutorial right?
Did you install the OMAP4430 driver?
Also, did you change the port of the LGE CDMA USB SERIAL PORT to com41 in your device manager?
LG FLASHTOOL TUTORIAL
Some more info about the LG Flashtool
Good Luck Buddy
Click to expand...
Click to collapse
I cannot boot into any recovery. Heck, my phone won't even show the LG Logo when I hold the power button.
I did all the steps right (I've even posted a tutorial that has helped a few others to do this, which is pretty ironic), and installed OMAP4430 drivers, AND changed the port to com41.
Thanks for the luck though. I sure am gonna need it.

So you can't go into download mode? Does your PC recognize the phone when its plugged in?
Sent from my LG-SU760 using xda app-developers app

LeighR said:
So you can't go into download mode? Does your PC recognize the phone when its plugged in?
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
Nope, I can't seem to get into download mode. The only thing that works right now is that S/W [insert Asian characters here] screen.

That s/w screen is similar (but not the same) as the one I get in download mode. I just checked again and I get a black background, 2 arrows making a circle and underneath it says S/W followed by some Korean.
Have you tried plugging in your USB and opening device manager to see if its recognised?
Sent from my LG-SU760 using xda app-developers app

LeighR said:
That s/w screen is similar (but not the same) as the one I get in download mode. I just checked again and I get a black background, 2 arrows making a circle and underneath it says S/W followed by some Korean.
Have you tried plugging in your USB and opening device manager to see if its recognised?
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
Yes, the device is recognized when in the S/W screen. I was able to change the port to com41 as well, so I could try to flash some .bin files with the Android system, because currently all it's able to do is erase the partitions, and not actually write anything to it.
It's also worth noting that at one point, I got Gingerbread to work. But, me being stupid, I tried to reinstall ICS, and the whole thing broke down on me. HOWEVER, when I was in Gingerbread, it told me my internal memory was corrupted. Would this make any issues when I try to reflash things?

I'm not very experienced at this but a corrupt internal memory doesn't sound healthy. All you can do is try to flash a ROM and hope for the best.
Sent from my LG-SU760 using xda app-developers app

Already tried flashing a few, nothing seems to go past that OMAP error I keep getting.
Thanks for the try though.

BG64 said:
HOWEVER, when I was in Gingerbread, it told me my internal memory was corrupted. Would this make any issues when I try to reflash things?
Click to expand...
Click to collapse
Your internal memory is not corrupted , you just didn't format your Internal SD space when you came back to Gingerbread thats why you had that message.
So thats not the issue...
Actually from what you describe so far your phone is OK.
If nobody can help you fix it until next weekend when i 'll check XDA again i 'll show you how to fix it. (unless i m too busy)

Ok. Thank you XBSall. Your help is very, VERY much appreciated.

Try to put the batterry out and in when u re connecting the phone to your computer and uninstall drivers and install it again and read the describtion again and try every things again ...
I had the same problem but i try and try.. then i get it
Sent from my LG-SU760 using xda app-developers app

[Q] Urgent Help needed

Hi Experts,
I was successfully able to flash ICS on my LG O3D but only .bin file and after that i tried to root phone was not sucessfully all the time ,restarted later and now my phone is not switching on properly.It shows LG logo then goes blank. PLEASE HELP.
Thanks in Advance.

When connected its showing charging and in device manager-->other devices showing CDC Serial & LGE COSMO USB Device

Did you try reflash it again ???
Try flash it with "lg smartflash" it tooo easy (just select the .bin file and .fls) .
Good Luck
Sent from my LG-P920

OS_Hacking said:
Did you try reflash it again ???
Try flash it with "lg smartflash" it tooo easy (just select the .bin file and .fls) .
Good Luck
Sent from my LG-P920
Click to expand...
Click to collapse
Thanks a lot for the reply.
I tried but nothing happening..its not detecting as usb to change port to 41.
Is there any other way?? Also for flashing when i insert battery and press volume up and then connect it starts and shows LG logo and goes blank.

It is not showing in PORT in device manager when connected pressing volume + button

Does the phone go to download mode ("S/W upgrade mode ) ?? By insert the battery while you hold vol+ ??
You will see two arrows like the sync symbol in your phone screen . And then the phone will still connected with the PC .
Your problem is easy to fix . Just try to enter download mode . And every thing will be fine .
Good Luck
Sent from my LG-P920

No its not going into download mode. COM is not detecting it.

[email protected] said:
No its not going into download mode. COM is not detecting it.
Click to expand...
Click to collapse
Try hold power on and the vol+ together , then plug it with the PC . Then insert the battery .
Sent from my LG-P920

[email protected] said:
Hi Experts,
I was successfully able to flash ICS on my LG O3D but only .bin file and after that i tried to root phone was not sucessfully all the time ,restarted later and now my phone is not switching on properly.It shows LG logo then goes blank. PLEASE HELP.
Thanks in Advance.
Click to expand...
Click to collapse
You hardbricked your phone if it doesn't go into download mode.
But no panic there is always a solution;
http://forum.xda-developers.com/showthread.php?t=1942836
Follow the guide above. (and I mean every step , however small they may seem)
ICS roms are now pre-rooted so you don't have to root.
Flash Xbsall's Ported custom ics (The one in the guide.)
Then install wkpark's recovery img. (Found here ; http://forum.xda-developers.com/showthread.php?t=1978543)
Boot into recovery.
Install Darkroom ICS Int. (It's the best in my opinion) or whatever rom you wish.
They are all pre-rooted.
If you can't i'll guide you through it.
Hope i Helped.
Cheers!

boltthrower56 said:
You hardbricked your phone if it doesn't go into download mode.
But no panic there is always a solution;
http://forum.xda-developers.com/showthread.php?t=1942836
Follow the guide above. (and I mean every step , however small they may seem)
ICS roms are now pre-rooted so you don't have to root.
Flash Xbsall's Ported custom ics (The one in the guide.)
Then install wkpark's recovery img. (Found here ; http://forum.xda-developers.com/showthread.php?t=1978543)
Boot into recovery.
Install Darkroom ICS Int. (It's the best in my opinion) or whatever rom you wish.
They are all pre-rooted.
If you can't i'll guide you through it.
Hope i Helped.
Cheers!
Click to expand...
Click to collapse
Thanks a lot for the help and i really appreciate your willingness to take me out of this trouble, Thanks again

Everything worked fine till step 9..But still not showing anything in Ports

Make sure the drivers are correctly installed. Especially omap4430...
Start the script that has been referred to in the guide.
Shut down the phone , remove the battery , plug usb cable and when you see "waiting for 5 seconds" plug in the battery. That should work.
Keep me posted.
Sent from my LG-P920 using xda app-developers app

Its showing s/w update image in phone but getting message USB device not detected in PC

Thanks alot boltthrower56 .
Finally able to recover my phone and restored 3 month old backup.
By the way may i know your real name .
Can you please help me with upgrading to ICS?

[email protected] said:
Its showing s/w update image in phone but getting message USB device not detected in PC
Click to expand...
Click to collapse
That may mean you have a bad cable.
But if you restored it , it's probably sometimes bad or you changed it or you used the front panel which is a hub (divides bandwidth , slows flashing process) and it's bad for ya.
Since my real name is turkish and hard to spell i'll give one better ;
Call me John.
If you must know my real name is "Dogukan".
And yes i can help you with that although it's relatively easy now that you got a hold of it.

Thanks a lot Dogukan..
Are you into android development? Am a real noob in this and you helped me coming out of really difficult situation.
Now i want to root my phone and everytime its showing 'error no device find'

I'm not into android development... my skills lie in networking so there is not much i can do for android.
But those are common knowledge...
I bricked my phone several times to learn those.
You don't need to root. Follow wkpark's recovery installation and flash a custom rom (Darkroom int is great)
Sent from my LG-P920 using xda app-developers app

[Q] LGMDP.exe doesn't shows my phone?

Hello,
i have a problem, i need to flash baseband ( http://forum.xda-developers.com/showthread.php?t=1149530 ) on my LG.
But LGMDP.exe doesn't shows my phone on Select port. But ONLY LGMDP.exe. I have usb debugging enabled.
So what can I do that it shows my phone, so I finally can flash baseband?
Hope you can help me fast.
Thanks.
Yours sincerely,
LegendZz

Have you installed LG Drivers
Sent from my GT-I9082 using xda premium

Yes, I have installed LG Drivers, PC Suite and so on, but dont work

Have you disabled lg modem from control panel>properties in your PC? After disabling, reboot PC & then connect phone.
Sent from my LG-P500

pmvyas said:
Have you disabled lg modem from control panel>properties in your PC? After disabling, reboot PC & then connect phone.
Sent from my LG-P500
Click to expand...
Click to collapse
Yes I have, but still don't work
Now I tried to install Gingerbread 2.3.3 official with KDZ Updater, but also this one says ' PHONE WAS NOT FOUND '

LegendZz said:
Yes I have, but still don't work
Now I tried to install Gingerbread 2.3.3 official with KDZ Updater, but also this one says ' PHONE WAS NOT FOUND '
Click to expand...
Click to collapse
for people, like me also, that LGMDP doesn't show device, you need to have installed LG drivers, disabled LG modem from device manager, reboot into recovery, conect phone to pc, go to advance/mounts and mount USB, that shoud make LGMDP show the device(maybe it will take some little time to detect it and instal drivers), from LGMDP select country and language, carrier, phone model and shoud see if there are updates for it and install them and after all is done reboot
AND DO NOT TRY TO UPDATE TROUGH KDZ BECAUSE ALOT OF PEOPLE HAD HARDBRICKED THEYR PHONES (USING KDZ IS NOT FOR EVERYBODY), ONLY USE LGMDP,
AN IF YOU EVENTUALY USED KDZ AND GAVE YOU ERROR, DO NOT PULL OUT BATTERY, JUST RETRY AGAIN UNTILL IS ALL DONE OK,
IF ALSO, YOU WILL NEED TO GET YOUR DEVICE TO THE REPAIR SHOP AND THAT IS NOT FOR FREE, OR IN THE WORST CASE YOU WILL NEED A NEW PHONE