Related
If you did something like install custom recovery on your lg optimus one and failed, you would get a black screen saying..
fastboot mode started
udc_start()
If this happens...
Relax.. Your phone is not bricked.. There are many ways to fix it... This method of unbricking should be done as a last resort because it erases all your data...
Charge your phone before proceeding even if the backlight is always on while charging..
Things required:
Kdz updater:
http://forum.xda-developers.com/showpost.php?p=8651505&postcount=1
Stock ROM:
http://forum.xda-developers.com/showthread.php?t=865479
USB cable, Windows PC with administrator account,LG united mobile drivers(google for it if you don't find it in the "Add or remove programs" window in the control panel)..
First disable all LGE modems under modems from Windows device manager in the Control Panel..
Make sure you have LG united mobile drivers installed.. Or just google for it..
Then press and hold both the back(return) button and the volume up button and simultaneously connect the USB cable..
The phone should light up and say Emergency mode!! in a green background.. If it goes to Emergency mode, it can be fixed... If it doesn't I'm sorry, search for an other forum or give it to the LG service center...
Now decompress the 7z file you downloaded using WinZip, WinRar etc., install msxml.msi from the uncompressed directory and run KDZ_FW_UPD.exe (With administrator rights by right clicking and selecting run as administrator).
In the dialog box, select Type : 3GQCT and PhoneMode: DIAG, select the kdz file and flash the stock ROM... It would take about 15 minutes.. If the kdz updater crashes, change compatibility mode or restart the computer and phone or do something till it works (Retry retry retry)...
For most of you it would probably say PHONE WAS NOT FOUND!.... If so, then follow all the steps said above, but this time, shake the life out of your phone after connecting the USB till the lines "PHONE WAS NOT FOUND!" stops appearing... If it does appear again retry for endless times or restart the computer or check if any modem drivers are active or try it in an another computer...
From here on, follow any one choice:
Choice 1:
Note: There is a fat chance for this choice to not work and for you to go back to the very first line of this thread...
If you want your phone to have all the data before you bricked it, just disconnect the USB when the phone shows the charge screen as if you are charging the phone while it is switched off.. (This was discovered accidentally by me so try it at your own risk ) After disconnecting try to power on the normal way and it should work and the phone should be like it was never bricked.. If it doesn't boot, retry flashing from the start.. If it starts and all your data is restored root it, install titanium backup and backup all your apps and data and save the contents of sdcard\titaniumbackup to your pc.. Then copy all you want in your sdcard to your pc.. Then redo all the steps without disconnecting till the kdz flasher says FINISHED.. This is because if you disconnect the usb in the middle, only half the rom would be installed which is unstable.. After installing the full rom, root it, and install titanium backup and copy all the copied content back to sdcard\titaniumbackup and restore them using titanium backup.. That's it..
Choice 2:
If you do not want the data and if you need to do a risk-free unbrick, then flash with the kdz updater and wait till it says FINISHED.. That's it..
Now that you know how to unbrick, try installing what bricked your phone again but this time in the correct way... GOOD LUCK...
AND FINALLY.... ONE MORE STEP.... PRESS THE "THANK" BUTTON IF I HELPED YOU IN ANY WAY...
where do you get kdz?
ljohnson1981 said:
where do you get kdz?
Click to expand...
Click to collapse
Links have been included...
ganesh3s3 said:
If you did something like install custom recovery on your lg optimus one and failed, you would get a black screen saying..
fastboot mode started
udc_start()
If this happens...
Relax.. Your phone is not bricked.. There is a way to fix it...
First disable lg modem from windows device manager..
Make sure you have lg universal driver installed.. Or just google for it..
Charge your phone before proceeding even if the backlight is always on..
Things required:
Kdz updater:
forum.xda-developers.com/showpost.php?p=8651505&postcount=1
Stock rom:
forum.xda-developers.com/showthread.php?t=865479
Usb cable, windows pc
Then press and hold both the back(return) button and the volume up button and simultaneously connect the usb cable..
The phone should light up and say Emergency mode!! in a green background..
Then decompress the 7z, install msxml.msi from the uncompressed directory and run KDZ_FW_UPD.exe (Has administrator).
Select Type : 3GQCT and flash the stock rom... It would take about 15 minutes.. If the kdz updater crashes, change compatibility mode or restart or do something till it works...
If you want your phone to have all the data before you bricked it, just disconnect the usb when the phone shows the charge screen as if you are charging the phone while it is switched off.. (This was discovered accidentally by me so try it at your own risk) After disconnecting try to power on the normal way and it should work and the phone should be like it was never bricked.. If it doesn't boot retry flashing from the start.. If it starts and all your data is restored root it, install titanium backup and backup all your apps and data and save the contents of sdcard\titaniumbackup to your pc.. Then copy all you want in your sdcard to your pc.. Then redo all the steps without disconnecting till the kdz flasher says FINISHED.. This is because if you disconnect the usb in the middle, only half the rom would be installed which is unstable.. After installing the full rom, root it, and install titanium backup and copy all the copied content back to sdcard\titaniumbackup and restore them using titanium backup.. That's it..
If you do not want the data and if you need to do a riskfree unbrick, then flash with the kdz updater and wait till it says FINISHED.. That's it..
Now that you know how to unbrick it, try installing what bricked your phone again but in the correct way... GOOD LUCK...
THANK ME IF I HELPED YOU...
Click to expand...
Click to collapse
i tried this but got msg:
[R&D Test Tools Log File]
12:20:25 : Launching SW update
12:20:25 : Unpacking KDZ
12:20:31 : KDZ file extraced
12:20:32 : Files were extracted.
12:20:32 : LGMobileDL Load.
12:20:32 : Port = 3
12:20:32 : Connecting to phone
12:20:37 : PHONE WAS NOT FOUND!
12:20:39 : ===FINISHED===
what to do????? i am using xp64....... what do you mean by (Has administrator).
Please help or i to go LG service center???
Thanks in advance
maxupload said:
i tried this but got msg:
[R&D Test Tools Log File]
12:20:25 : Launching SW update
12:20:25 : Unpacking KDZ
12:20:31 : KDZ file extraced
12:20:32 : Files were extracted.
12:20:32 : LGMobileDL Load.
12:20:32 : Port = 3
12:20:32 : Connecting to phone
12:20:37 : PHONE WAS NOT FOUND!
12:20:39 : ===FINISHED===
what to do????? i am using xp64....... what do you mean by (Has administrator).
Please help or i to go LG service center???
Thanks in advance
Click to expand...
Click to collapse
By (has administrator) I meant to run kdz with administrator user account rights..
And for your phone not found problem, did you uninstall everything that I listed? If so then you should shake the phone more vigorously from plugging your phone to usb till the phone is found, seriously. If it is still not found, review if you have followed my instructions without leaving a single one out and retry till you suceed... Best of luck... Any more help.. Ask me.
ganesh3s3 said:
By (has administrator) I meant to run kdz with administrator user account rights..
And for your phone not found problem, did you uninstall everything that I listed? If so then you should shake the phone more vigorously from plugging your phone to usb till the phone is found, seriously. If it is still not found, review if you have followed my instructions without leaving a single one out and retry till you suceed... Best of luck... Any more help.. Ask me.
Click to expand...
Click to collapse
when i try to run updater as administrator in winxp 64 it is asking for password ??? i didint set any password...and default user have administrator right without any password....what to do.....bit tense please help me out..... please
maxupload said:
when i try to run updater as administrator in winxp 64 it is asking for password ??? i didint set any password...and default user have administrator right without any password....what to do.....bit tense please help me out..... please
Click to expand...
Click to collapse
Ok if you can't run it as an administrator try skipping that step and try connecting your phone without admin till your is found.. Try SHAKING...
If it doesn't work.. Take your phone and equipment to your friends home which has admin rights...try till you suceed because it usually is a painfree process.. You can fix your phone if it goes to emergency mode... Dont worry.. feel free to ask for help...
Did my P500 Dead?
Hi there,
I had LG P500 with firmware 2.2.1 10e. And The 2.2.1 cannot be root. So i down it to 2.2 and 10b indian. And I use thunderg....recovery from xda. And then i update it vai recovery by applying update.zip and finally i had 2.3.1. It work great but the camera not work, So i decided to down to 2.2 but while i update using kdz updater It just running to param : 36....it stop and show upgrade error. While my phone in emergency mode i removed battery and open it back. It just show Lg logo and at the moment all my home...back...button light was always blink , it just keep at lg logo screen!!! ....
. Too much sorry for my English cuz it not my native i come from Cambodia. And too much much and more thank if you could help me.
SmartLCN said:
Hi there,
I had LG P500 with firmware 2.2.1 10e. And The 2.2.1 cannot be root. So i down it to 2.2 and 10b indian. And I use thunderg....recovery from xda. And then i update it vai recovery by applying update.zip and finally i had 2.3.1. It work great but the camera not work, So i decided to down to 2.2 but while i update using kdz updater It just running to param : 36....it stop and show upgrade error. While my phone in emergency mode i removed battery and open it back. It just show Lg logo and at the moment all my home...back...button light was always blink , it just keep at lg logo screen!!! ....
. Too much sorry for my English cuz it not my native i come from Cambodia. And too much much and more thank if you could help me.
Click to expand...
Click to collapse
Try my above method again and again and if it doesn't work try an another firmware or on an another computer... If nothing works then stick with the 2.3 if you can boot into recovery...
LG P500 does not care
Hello everybody I'm new to the portal, I had tried to update my phone, he was given an error now will not turn anyone knows how to help me I thank you
hug
Doors it show any error when booting or wont even switch on... If it lights up, Try my method...
Sent from my LG-P500 using XDA Premium App
i know it says for lg optimus one but is there a way that it will work for lg optimus v?
still stuck in android logo even after following all the procedures
can anyone help me
eventhough i had successfully change the firmware of phone, it still boot loop in androind logo i dont know what to do
ty
maxupload said:
i tried this but got msg:
[R&D Test Tools Log File]
12:20:25 : Launching SW update
12:20:25 : Unpacking KDZ
12:20:31 : KDZ file extraced
12:20:32 : Files were extracted.
12:20:32 : LGMobileDL Load.
12:20:32 : Port = 3
12:20:32 : Connecting to phone
12:20:37 : PHONE WAS NOT FOUND!
12:20:39 : ===FINISHED===
what to do????? i am using xp64....... what do you mean by (Has administrator).
Please help or i to go LG service center???
Thanks in advance
Click to expand...
Click to collapse
i have got same probem
lg drivers installed, LGE modem disabled
win xp 32bit
It may work on Optimus V... Try it out...
Sent from my LG-P500 using XDA Premium App
alphamale20 said:
can anyone help me
eventhough i had successfully change the firmware of phone, it still boot loop in androind logo i dont know what to do
ty
Click to expand...
Click to collapse
Try my method and say if it works... Reflashing the firmware should do it...
Sent from my LG-P500 using XDA Premium App
guys pls help....emergency mode is not comming when iam pressing that key combination..i think i bricked my phone.....help plss...
i unbricked my phone..still i cant believ i did that.......spend one complete day for it.....in KDZ updater you should select emergency mode instead of DIAG.....dont forget to disable the LG modem in device manager...and also make sure that your downloaded firmware file is working......best of luck guys....
alxbsl96 said:
guys pls help....emergency mode is not comming when iam pressing that key combination..i think i bricked my phone.....help plss...
Click to expand...
Click to collapse
Either you completely bricked your phone or there is no charge left in it... Try charging for sometime and Try...
pkosnovsky said:
i have got same probem
lg drivers installed, LGE modem disabled
win xp 32bit
Click to expand...
Click to collapse
Try shaking more or try it in all three modes where you selected diag ... try every combo till you succeed... Best of luck....
i have following problems with my bricked lg-p500
1)stuck at lg logo
2) Unable to go in emergency mode
3)Unable to flash stock ROM with kdz
plz ......plz.....help
its urgent
reply......waiting...
abhi007 said:
i have following problems with my bricked lg-p500
1)stuck at lg logo
2) Unable to go in emergency mode
3)Unable to flash stock ROM with kdz
plz ......plz.....help
its urgent
reply......waiting...
Click to expand...
Click to collapse
I had same problem. I tried to unbrick my phone via KDZ. But unfourtunatelly i got ful brick . So i do not recommend you using KDZ. NEVER.
http://forum.xda-developers.com/showthread.php?t=1793031
Try that with phone in lg logo if you cant go to emergency mode kdz is a phone killer lol. It wprks for others try it.
Sent from my LG-P500 using xda app-developers app
lipe082 said:
http://forum.xda-developers.com/showthread.php?t=1793031
Try that with phone in lg logo if you cant go to emergency mode kdz is a phone killer lol. It wprks for others try it.
Sent from my LG-P500 using xda app-developers app
Click to expand...
Click to collapse
Where have you been when i needed you? : http://forum.xda-developers.com/showthread.php?p=29683034 LOL
(And i accidently thanked you, weanted to press more info )
Gess i didnt see sorry when you get your phone back any help needed just ask and you can press more thanks lol just joking
Sent from my LG-P500 using xda app-developers app
FInallly.....after....updating...mobile...drivers...i...flash ....stock ..rom....
thnks....to......allllll
abhi007 said:
FInallly.....after....updating...mobile...drivers...i...flash ....stock ..rom....
thnks....to......allllll
Click to expand...
Click to collapse
What have you used? I am asking because i think i will face this problem as i am such a noob with KDZ (If you used KDZ and it worked then i am really sorry for that my comment i posted earlier :cyclops: )
the only time i use .kdz was a pain in the ass only after than more 10 tries finaly phone conect its not your fault kdz is unstavel LGMDP is by far more stable.
ashirviskas said:
What have you used? I am asking because i think i will face this problem as i am such a noob with KDZ (If you used KDZ and it worked then i am really sorry for that my comment i posted earlier :cyclops: )
Click to expand...
Click to collapse
i used latest drivers from B2c and Kdz...updater...
a chance of recovery
abhi007 said:
i have following problems with my bricked lg-p500
1)stuck at lg logo
2) Unable to go in emergency mode
3)Unable to flash stock ROM with kdz
plz ......plz.....help
its urgent
reply......waiting...
Click to expand...
Click to collapse
If you did something like install custom recovery on your lg optimus one and failed, you would get a black screen saying..
fastboot mode started
udc_start()
If this happens...
Relax.. Your phone is not bricked.. There are many ways to fix it... This method of unbricking should be done as a last resort because it erases all your data...
Charge your phone before proceeding even if the backlight is always on while charging..
Things required:
Kdz updater:
Stock ROM:
Required- 1. USB cable 2. Windows PC with administrator account 3. LG united mobile drivers
1. First Go to My Computer> Right Click & go To properties> Thern Go To Device Manager & disable all LGE modems under modems from Windows device manager in the Control Panel.
2. Make sure you have LG united mobile drivers installed & you have restarted Computer once after installation of drivers.
3. No the trick is here…. press and hold both the back (return) button and the volume up button and simultaneously connect the USB cable.
The phone should light up and say Emergency mode!! in a green background.. If it goes to Emergency mode, it can be fixed... If it doesn't I'm sorry, search for an other forum or give it to the LG service center...
4. Now decompress the KDZ file you downloaded using WinZip, WinRar etc., install msxml.msi from the uncompressed directory and runKDZ_FW_UPD.exe (With administrator rights by right clicking and selecting run as administrator).
In the dialog box, select Type : 3GQCT and PhoneMode: DIAG, select the kdz file and flash the stock ROM... It would take about 15 minutes.. If the kdz updater crashes, change compatibility mode or restart the computer and phone or do something till it works (Retry retry retry)...
For most of you it would probably say PHONE WAS NOT FOUND!.... If so, then follow all the steps said above, again retry for endless times or restart the computer or check if any modem drivers are active or try it in an another computer...
ashirviskas said:
I had same problem. I tried to unbrick my phone via KDZ. But unfourtunatelly i got ful brick . So i do not recommend you using KDZ. NEVER.
Click to expand...
Click to collapse
We had the same problem. It bricked my phone and sadly it was out of warranty. I had to pay to have it JTAGged to function again.
healthhome said:
If you did something like install custom recovery on your lg optimus one and failed, you would get a black screen saying..
fastboot mode started
udc_start()
If this happens...
Relax.. Your phone is not bricked.. There are many ways to fix it... This method of unbricking should be done as a last resort because it erases all your data...
Charge your phone before proceeding even if the backlight is always on while charging..
Things required:
Kdz updater:
Stock ROM:
Required- 1. USB cable 2. Windows PC with administrator account 3. LG united mobile drivers
1. First Go to My Computer> Right Click & go To properties> Thern Go To Device Manager & disable all LGE modems under modems from Windows device manager in the Control Panel.
2. Make sure you have LG united mobile drivers installed & you have restarted Computer once after installation of drivers.
3. No the trick is here…. press and hold both the back (return) button and the volume up button and simultaneously connect the USB cable.
The phone should light up and say Emergency mode!! in a green background.. If it goes to Emergency mode, it can be fixed... If it doesn't I'm sorry, search for an other forum or give it to the LG service center...
4. Now decompress the KDZ file you downloaded using WinZip, WinRar etc., install msxml.msi from the uncompressed directory and runKDZ_FW_UPD.exe (With administrator rights by right clicking and selecting run as administrator).
In the dialog box, select Type : 3GQCT and PhoneMode: DIAG, select the kdz file and flash the stock ROM... It would take about 15 minutes.. If the kdz updater crashes, change compatibility mode or restart the computer and phone or do something till it works (Retry retry retry)...
For most of you it would probably say PHONE WAS NOT FOUND!.... If so, then follow all the steps said above, again retry for endless times or restart the computer or check if any modem drivers are active or try it in an another computer...
Click to expand...
Click to collapse
What. do you not read? people on this thread are telling the OP to not use KDZ. plus he can't even get into emergency mode. so this won't work ? USE LGDMP! DON'T CONFUSE NEWBIES.
AND STOP PASTING THE SAME GUIDE THAT YOU COPIED FROM SOMEWHERE ELSE
Hello Guys, i have to show you, how you can recover your LG P720/725 and 720H. It´s very simple. Since i have my LG P720 i have reflashed my phone so often by this step´s
there give´s 3 methodes to bring your Smarthphone back to orginal
First what do you need.
First off all you need the KDZ from your Phone and the *.cp and *.ap also the binarys
----------- S/W MODE --------------
Plugged your Batterie out of the Phone. Wait 3 seconds.
Bring it back and insert your USB Cable to the Phone. Then Hold the Volume+ Button for 6 seconds. Your S/W Mode will start.
Now Connect your Phone to the PC, maybe you must install the Driver. (There are in the LG Flash Tool Package included)
If you didn´t flashed your Phone and it´s bricked automaticly , you can use the First Methode
--------First Methode ------
Connect Your Phone via USB to the PC and bring your Phone in the S/W Mode.
Start your LGMobile Support Tool and start the Emergency Mode, it will download the KDZ and flash it new to the Phone.
You have flashed a wrong Bin or KDZ to your Phone? Or Your Bootloader is bricked, also Bootloop ? Use this Methode
---------- Second Methode-----------------
You need the "LG Flash Tool Package" and the full working "LPG720 DLL" you can get the FlashPack here p92x.acidhazardrom.com/ccount/click.php?id=15 . This Includes all relevant Drivers, install it.
Here in the Post you find the LG Flash Tool 1.2 without Drivers
and the DLL are from here http://forum.xda-developers.com/attachment.php?attachmentid=1937519&stc=1&d=1367761284
The SmartFlash Tool http://hotfile.com/dl/143853325/ed430ad/SFT.rar.html Password [email protected]
--If You have a Behavior Blocker on your PC, disable it ---
Install all Drivers from the LG FlashPack.
Bring your Phone to the S/W Mode, install the Drivers.
So after you installed it, go to your Device Manager on the PC and change the Comport under connections > LG Modem ..... to COM41. Disconnect your Phone.
Install the FlashTool, then Start the LGFlashTool.exe from the LG Flash Tool 1.2. Then Select Manual Mode, choose the DLL and add your AP.bin and CP.fls. Press OK. Goto the COMConnector Button and Choose the Port 1. OK. Click on the Arrowbutton , the Program will be ready. Connect your Phone in S/W Mode now to the PC. It start´s automaticly and flash´s your device new.
After your Phone is ready, check your Mobile Network, if its false,"No conenction" you have to reflash the Baseband.
Use the Smartflash Tool, bring your Phone Back to S/W, start Smartflash and connect your phone. Goto the Register Rom Copy D/L under CP Bin use the *.fls binary. Click the Button "Start" now the Smartflash flash´s the Baseband new.
Now Your Phone is NEW.
---------------------------------------------------------------
My Smartphone is Permantently Bricked, bootloop, flashtool can´t flash anything(but i have used it correctly), Kernel Error or anything else
----------- The Third Methode-------------
So Guys, this is complicated for noobs.
You need the OAMP TOOL, download it here http://forum.xda-developers.com/attachment.php?attachmentid=1937574&stc=1&d=1367763391
Now unplug your Batterie from the Phone, and connect it via USB to the PC. Now he will install the Driver, make it manual and choose the Driver from the folder usb_drv_windows, includes in the Package your downloaded.
So now if you have installed the Driver, start the "start_fastboot.bat". Choose your Phone and press the Button on your keyboard, the Tool will bring your Device to the Fastboot mode, if its write to start the mode "Pls wait 5 secondes " is now in the Screen read. Plug your batterie back to your phone.
then choose "install orginal bootloader" and follow the Steps. After you have to all, bring it back to the S/W Mode and follow Second Methode.
------------------------My S/W Mode is Gone-------------------
Follow Third Methode, but hold your vol up button permanetly , this will bring your Phone to the S/W Mode.
----------------------- Nothing goes, i think my Device is Bricked permantenly, fastboot can find any partitions or any thing else--------------------------
After i had this Problem, i fixxed it. So start Omap, choose your device. Hold permanently your Vol up button, plugg the Cable to usb and insert the Batterie. Omap brings your phone back to S/W.
Now flash your Stock Image with FlashTool, maybe 3 Times.
It works for me
----------- Other Mode KDZ_FW_UPD ---------------
i have forgot to tell you this mode. For this you need the KDZ File.
Download http://forum.xda-developers.com/attachment.php?attachmentid=1949514&stc=1&d=1368135582
Its the same methode with the LG Mobile Support Tool, but offline.
Bring your Phone to S/W Mode and connect it to the PC.
First you have to edit your hosts file. Open it and insert this 127.0.0.1 csmg.lgmobile.com
then start kdz server, start windows enabler. See at the Tryicon click on it and make it ON.
Then open UpTestEX_mod2_marwin
On the rigth side, click on select kdz file. Choose your KDZ.
On the Bottom start "normal web upgrade test"
Then Upgrade Start.
The Mobile Support Tool opens and flashs the KDZ
This was a short Guide to bring your Phone back. If You have questions so ask pls =). Btw sry for my bad English, but i hope you can understand it
Added CWM for P720 maybe P920
updated
TNX MasterTobi YOU GIVE ME A VERY GOOD IDE AND I HAVE SIVE MY DEVICE:good:
toty250 said:
TNX MasterTobi YOU GIVE ME A VERY GOOD IDE AND I HAVE SIVE MY DEVICE:good:
Click to expand...
Click to collapse
Good Job
re is a little difficult to boot in, and only stock function can shutdown the phone. hope more perfect one will come soon
Sent from my LG-SU870 using xda premium
ms2003 said:
re is a little difficult to boot in, and only stock function can shutdown the phone. hope more perfect one will come soon
Sent from my LG-SU870 using xda premium
Click to expand...
Click to collapse
to boot in what ? and what do you mean with " and only stock function can shutdown the phone"
MasterTobi said:
Hello Guys, i have to show you, how you can recover your LG P720/725 and 720H. It´s very simple. Since i have my LG P720 i have reflashed my phone so often by this step´s
there give´s 3 methodes to bring your Smarthphone back to orginal
First what do you need.
First off all you need the KDZ from your Phone and the *.cp and *.ap also the binarys
Click to expand...
Click to collapse
Hi,
How do I get the binary files?
Also, the SFT.rar file is asking for a password.
If I have the KDZ, .bin and .fls files, i can use this method to upgrade to later version of software as well ( I am on V10C on P725, I can use this method to upgrade to V10F as well)
please help.
schubeir
ok if you read the Guide you find
The SmartFlash Tool http://hotfile.com/dl/143853325/ed430ad/SFT.rar.html Password [email protected] <<<<<< Passwort
the Binary files are from the KDZ, you musst extract them with LG Extract Tool
you can Use SFT or LG Faslhtool to flash you binarys.
If You have only the KDZ Use KDZ_UP......
Good Job !!!
Dear MasterTobi, hello!
I am trying all these methods, but I can't unbrick my phone! I can enter 2 different screens for S/W Upgrade, one by normal mode, another by OMAP boot mode, bu tin anyone my phone goes live... Do I have to select the port 41 in LG Modem in Device Manager, and after this, port 1 in the LG Flahs Tool? Is it correct? When I try to do this, I got the message "Downlaod Fail" each 20 seconds in the port 1 field at the LG Flash Tool.
I tried the methods in this post and another ones, but anyone works for me. Do you have any idea?
Thank you very much!
MasterTobi said:
Hello Guys, i have to show you, how you can recover your LG P720/725 and 720H. It´s very simple. Since i have my LG P720 i have reflashed my phone so often by this step´s
there give´s 3 methodes to bring your Smarthphone back to orginal
First what do you need.
First off all you need the KDZ from your Phone and the *.cp and *.ap also the binarys
----------- S/W MODE --------------
Plugged your Batterie out of the Phone. Wait 3 seconds.
Bring it back and insert your USB Cable to the Phone. Then Hold the Volume+ Button for 6 seconds. Your S/W Mode will start.
Now Connect your Phone to the PC, maybe you must install the Driver. (There are in the LG Flash Tool Package included)
If you didn´t flashed your Phone and it´s bricked automaticly , you can use the First Methode
--------First Methode ------
Connect Your Phone via USB to the PC and bring your Phone in the S/W Mode.
Start your LGMobile Support Tool and start the Emergency Mode, it will download the KDZ and flash it new to the Phone.
You have flashed a wrong Bin or KDZ to your Phone? Or Your Bootloader is bricked, also Bootloop ? Use this Methode
---------- Second Methode-----------------
You need the "LG Flash Tool Package" and the full working "LPG720 DLL" you can get the FlashPack here p92x.acidhazardrom.com/ccount/click.php?id=15 . This Includes all relevant Drivers, install it.
and the DLL are from here http://forum.xda-developers.com/attachment.php?attachmentid=1937519&stc=1&d=1367761284
The SmartFlash Tool http://hotfile.com/dl/143853325/ed430ad/SFT.rar.html Password [email protected]
--If You have a Behavior Blocker on your PC, disable it ---
Install all Drivers from the LG FlashPack.
Bring your Phone to the S/W Mode, install the Drivers.
So after you installed it, go to your Device Manager on the PC and change the Comport under connections > LG Modem ..... to COM41. Disconnect your Phone.
Install the FlashTool, then Start the LGFlashTool.exe from the LG Flash Tool 1.2. Then Select Manual Mode, choose the DLL and add your AP.bin and CP.fls. Press OK. Goto the COMConnector Button and Choose the Port 1. OK. Click on the Arrowbutton , the Program will be ready. Connect your Phone in S/W Mode now to the PC. It start´s automaticly and flash´s your device new.
After your Phone is ready, check your Mobile Network, if its false,"No conenction" you have to reflash the Baseband.
Use the Smartflash Tool, bring your Phone Back to S/W, start Smartflash and connect your phone. Goto the Register Rom Copy D/L under CP Bin use the *.fls binary. Click the Button "Start" now the Smartflash flash´s the Baseband new.
Now Your Phone is NEW.
---------------------------------------------------------------
My Smartphone is Permantently Bricked, bootloop, flashtool can´t flash anything(but i have used it correctly), Kernel Error or anything else
----------- The Third Methode-------------
So Guys, this is complicated for noobs.
You need the OAMP TOOL, download it here http://forum.xda-developers.com/attachment.php?attachmentid=1937574&stc=1&d=1367763391
Now unplug your Batterie from the Phone, and connect it via USB to the PC. Now he will install the Driver, make it manual and choose the Driver from the folder usb_drv_windows, includes in the Package your downloaded.
So now if you have installed the Driver, start the "start_fastboot.bat" follow the Steps. BUT we choose press now the the Button 1 on your keyboard, the Tool will bring your Device to the Fastboot mode, if its write to start the mode "Pls wait 5 secondes " is now in the Screen read. Plug your batterie back to your phone.
then choose "install orginal bootloader" and follow the Steps. After you have to all, bring it back to the S/W Mode and follow Second Methode.
------------------------My S/W Mode is Gone-------------------
Follow Third Methode, but hold your vol up button permanetly , this will bring your Phone to the S/W Mode.
----------------------- Nothing goes, i think my Device is Bricked permantenly, fastboot can find any partitions or any thing else--------------------------
After i had this Problem, i fixxed it. So start Omap, choose your device. Hold permanently your Vol up button, plugg the Cable to usb and insert the Batterie. Omap brings your phone back to S/W.
Now flash your Stock Image with FlashTool, maybe 3 Times.
It works for me
----------- Other Mode KDZ_FW_UPD ---------------
i have forgot to tell you this mode. For this you need the KDZ File.
Download http://forum.xda-developers.com/attachment.php?attachmentid=1949514&stc=1&d=1368135582
Its the same methode with the LG Mobile Support Tool, but offline.
Bring your Phone to S/W Mode and connect it to the PC.
First you have to edit your hosts file. Open it and insert this 127.0.0.1 csmg.lgmobile.com
then start kdz server, start windows enabler. See at the Tryicon click on it and make it ON.
Then open UpTestEX_mod2_marwin
On the rigth side, click on select kdz file. Choose your KDZ.
On the Bottom start "normal web upgrade test"
Then Upgrade Start.
The Mobile Support Tool opens and flashs the KDZ
This was a short Guide to bring your Phone back. If You have questions so ask pls =). Btw sry for my bad English, but i hope you can understand it
Click to expand...
Click to collapse
yes you have to use the DLL from the first post, include it in flashtool "select Model from DLL " or so. in the screen you can change your bin files
Wellington.BK said:
Dear MasterTobi, hello!
I am trying all these methods, but I can't unbrick my phone! I can enter 2 different screens for S/W Upgrade, one by normal mode, another by OMAP boot mode, bu tin anyone my phone goes live... Do I have to select the port 41 in LG Modem in Device Manager, and after this, port 1 in the LG Flahs Tool? Is it correct? When I try to do this, I got the message "Downlaod Fail" each 20 seconds in the port 1 field at the LG Flash Tool.
I tried the methods in this post and another ones, but anyone works for me. Do you have any idea?
Thank you very much!
Click to expand...
Click to collapse
You can follow this guide which works for All OS versions of Windows .
If you need any help, you can post there http://forum.xda-developers.com/showthread.php?t=2246001
Sorry, but if I use your DLl, I got the message "Model Name is different! Chel phone or DLL!".
Also, I tried the smartflash tool, selecting the ap and cp. At the ending, appears a mesage "Magic number doesn't concide".
And finally, I tried the "Normal web upgrade test". This one looked as my phone would return to life, but not...
In any of methods I could turn on the phone. I don't know what I can do know. I am very, very afraid...
MasterTobi said:
yes you have to use the DLL from the first post, include it in flashtool "select Model from DLL " or so. in the screen you can change your bin files
Click to expand...
Click to collapse
---------- Post added at 01:16 AM ---------- Previous post was at 01:11 AM ----------
Dear Kahale,
The method didn't work for me... I don't know why, I don't know what else more I can do... If you have a light for me, please...
Thanks!
Karim Kahale said:
You can follow this guide which works for All OS versions of Windows .
If you need any help, you can post there http://forum.xda-developers.com/showthread.php?t=2246001
Click to expand...
Click to collapse
This guide is for P720, right? not Optimus 3D.
@wellington, which phone do you have?
Karim's guide is not for 3D Max, right???
drastic00 said:
This guide is for P720, right? not Optimus 3D.
@wellington, which phone do you have?
Karim's guide is not for 3D Max, right???
Click to expand...
Click to collapse
My guide is similar to the Resurrection guide which supports 3D MAX, the difference is that I've added some different steps and a slightly different method.
My phone is a 3D MAX, a P725.
Tx!
drastic00 said:
This guide is for P720, right? not Optimus 3D.
@wellington, which phone do you have?
Karim's guide is not for 3D Max, right???
Click to expand...
Click to collapse
Ok then, good luck!
Never mind.
Sent from my LG-P720 using xda premium
oh guys...............
so you have a magic number ........ strange, there is only the error if you have a wrong version
you have to download the LGP720AT-00-V10e-EUR-XXX-JUL-17-2012+0_AP this is for the P720/P725 alias 3D MAX
Success!
Hey people! I got success! After many days trying, I unbricked my phone! I will tell you what I did.
- My phone is a P725. I don’t know exactly where is it from. This information (P725) was very important for me in the unbricking process.
- I used the LG Flash Tool 1.3.77.21 (http://forum.xda-developers.com/attachment.php?attachmentid=984864&d=1333650043).
- Now, the two cheats that helped me to unbrick my phone:
1st: I didn’t use the .dll from the first page of this post, and I didn’t use the .dll, .bin and .fls extracted from the KDZ gotten from the IMEI of the phone. They didn’t work for me. I googled for these files for P725AT, which was the model that LG Flash Tool was telling me that is my phone. I found the following files:
http://freakshare.com/files/e6xssy95/BIN_LGP725AT-00-V10b-ARB-XXX-MAY-08-2012-0.zip.html
http://uploaded.net/file/v6orqts2
2nd: At the flashing process, there is a pause at 80% telling that the phone will reset. In some cases, the reset really occurs, but in my case, the reset didn’t occur. A lot of errors appeared (see the image), but no problem. I just turned on my phone, and BINGO! It was working again.
It’s important to tell that I had to put my phone in download mode using the OMAP TOOL, that can be found in the first page of this post (http://forum.xda-developers.com/attachment.php?attachmentid=1937574&stc=1&d=1367763391). Don’t forget to change the LG USB COM Port to 41.
That is my history! I hope that this help someone. I would like to thank everybody who wrote about the brick of this phone (MasterTobi, Karim Kahale, Eklovya Dutta [I'm not certain of how to link for them, sorry!] and anybody else), I believe that is one of the worsts bricks in smartphones…
Good luck for all!
EDIT:
I forgot to tell: all the process was made in a Windows 8 64 bit. It gave me some difficults to install all the drivers, but it is possible, Google it and found how to.
This thread is about how to recover the MTK Android phone, if it has gone Bricked (soft/hard/dead/etc)
THIS IS FOR INFORMATION ONLY.
Q. How Phone gets Bricked?
Ans : Basically, phone get bricked during the installation of Android OS (flashing).
Reason/why it happens
- If flashing is interrupted by low battery or loose cable connection during flashing.
- Using wrong firmware or a custom ROM (unstable) to flash your phone.
Result:
* Phone will not boot even after holding the power key and it will not accept charging. (Hard Brick / Dead Brick)
* Boot-Loop
* Restart loop
* No Recovery (In this situation, Hard Reset will not work)
Q. - Why Phone becomes dead (MTK Android Phone) ?
Ans : While installing Custom ROM or Stock firmware (unstable), Preloader (.bin) file becomes corrupted.
PRELOADER - It is the file in MTK android phone which helps to boot the phone.
Tools & Software Required:
SP Flash tool
Android Stock ROM
MTK USB Driver
PC / Laptop
Dead MTK Phone
USB cable.
NOTE: SP Flash tool has 3 Dropdown, Its meaning & How to use:
MOTA SIU : while choosing this function before clicking on Download, only boot, recovery and Android will be updated.
Format All + Download : while choosing this function before clicking on Download, it first erases the old Firmware then install new firmware. (Recommended when MTK phone stuck at logo & hard reset fails)
Firmware Upgrade: while choosing this function before clicking on Download, its update the Android version. (Recommended when installing a higher or lower version of Android manually)
Steps to Fix/Unbrick Dead Android (MTK) Phone
1- Install MTK driver.
2- Download the tool.
3- Unzip it and double click on Flash_tool.exe.
4- It will launch the tool.
5- Download Android stock ROM, unzip it.
6- Click on Scatter-Loading and assign the path of file (Select Firmware i.e. {.txt extension}).
7- Click on Download.
8- Switch off Mobile and connect it to PC using USB cable by pressing Volume down as boot key.
9- Flashing starts and when completed, Download OK will appear.
Also check Here for more Understanding, Special Thanks to @yuweng
Please let me know if anything is wrong here, so that I can make correction and help other member for better understanding.
Also hit THANKS button if you find this as useful info.
If you found this post helpful then don’t forget to share this post with other Android users so that they could get their dead phones working in few easy steps without paying few dollars on it.
Reserved
Nice Guide, Can you please list MTK devices ????
421rahman said:
Nice Guide, Can you please list MTK devices ????
Click to expand...
Click to collapse
OK, Will be adding attachments later, Thanks
Salman
--
Thanks @Salman Al-Badgail for this use full info.
Deena Khanam said:
Thanks @Salman Al-Badgail for this use full info.
Click to expand...
Click to collapse
welcome & Thanks
@jamsubzero check this guide
@jamsubzero I saw your post and thread regarding Dead Bricked
Hey guys.
I own a lenovo A328. For the past couple of months my phone, gets poping up "com.google.etc.etc has stopped".
I tried doing a factory reset, but no luck. Then I learn that I can flash it using SPflash tool with the stock firmware.
And luckily, I did it, my phone back to normal. But then, a few couple of weeks, it started to pop up the same error messages again until I can't do anything on my phone, and unitl it boot loops. So, I reflash again with the same firmware (stock).. and it works again. And same thing keeps repeating and repeating;
until I thought I can try to change the options in sp flash tool..
Instead of "Download only", I choose, "Firmware upgrade".... the flashing finished successfully.
BUT when I press the power button to turn it on, nothing happens, and when I charge it, I cant see the charging screen (or it's not actually charging). I'm sure that it is charging before the flashing, and the power button is working.
When I connect it to the computer, i hear a "connected" sound, then "disconnected", and repeating.
i also tried to reflash it, both the "DL only" and "Firmware upgrade", even the "Format all + ...."
and it flashed successfully (meaning, computer still recognized it), but still not turning on.
Please help me. please.
Click to expand...
Click to collapse
NEVER DOWNLOAD ROM NOT MEANT FOR YOUR PHONE. IT WILL BRICK IT !
What you did is you flashed wrong firmware to your device and the result you in Dead Brick, However there is still solution for your problem. Please Please Please do a proper search first and download correct firmware and other necessary files for your device. Please check firmware number ok.
You can Flash it again but you need to open phone and try, Check here for better understanding.
GUIDE : HERE. Or else please go to any mobile shop and ask them to flash. Dont tell the original reason that you tried to flash or etc. Tell them that it stop suddenly and for now I am unable to access it. They charge you about 5-15 USD based on your country, for me they had charged 10U$D me for lenovo A3500-HV dead flashing. Hope this help you.
i got no scatter file in stock rom pls help!
Aller retour si flash tool
Hard bricked Lenovo a7000
**Hi I got problem on yesterday I was install ing new Rom but suddenly my Lenovo a7000 hard brick
It is not responding any point .even charging .and charging light also .it's dead
But it when I connet to my pc it's connecting sound conning from pc ....My phone is dead plaease help
Salman Al-Badgail said:
This thread is about how to recover the MTK Android phone, if it has gone Bricked (soft/hard/dead/etc)
THIS IS FOR INFORMATION ONLY.
Q. How Phone gets Bricked?
Ans : Basically, phone get bricked during the installation of Android OS (flashing).
Reason/why it happens
- If flashing is interrupted by low battery or loose cable connection during flashing.
- Using wrong firmware or a custom ROM (unstable) to flash your phone.
Result:
* Phone will not boot even after holding the power key and it will not accept charging. (Hard Brick / Dead Brick)
* Boot-Loop
* Restart loop
* No Recovery (In this situation, Hard Reset will not work)
Q. - Why Phone becomes dead (MTK Android Phone) ?
Ans : While installing Custom ROM or Stock firmware (unstable), Preloader (.bin) file becomes corrupted.
PRELOADER - It is the file in MTK android phone which helps to boot the phone.
Tools & Software Required:
SP Flash tool
Android Stock ROM
MTK USB Driver
PC / Laptop
Dead MTK Phone
USB cable.
NOTE: SP Flash tool has 3 Dropdown, Its meaning & How to use:
MOTA SIU : while choosing this function before clicking on Download, only boot, recovery and Android will be updated.
Format All + Download : while choosing this function before clicking on Download, it first erases the old Firmware then install new firmware. (Recommended when MTK phone stuck at logo & hard reset fails)
Firmware Upgrade: while choosing this function before clicking on Download, its update the Android version. (Recommended when installing a higher or lower version of Android manually)
Steps to Fix/Unbrick Dead Android (MTK) Phone
1- Install MTK driver.
2- Download the tool.
3- Unzip it and double click on Flash_tool.exe.
4- It will launch the tool.
5- Download Android stock ROM, unzip it.
6- Click on Scatter-Loading and assign the path of file (Select Firmware i.e. {.txt extension}).
7- Click on Download.
8- Switch off Mobile and connect it to PC using USB cable by pressing Volume down as boot key.
9- Flashing starts and when completed, Download OK will appear.
Also check Here for more Understanding, Special Thanks [email protected]
Please let me know if anything is wrong here, so that I can make correction and help other member for better understanding.
Also hit THANKS button if you find this as useful info.
If you found this post helpful then don’t forget to share this post with other Android users so that they could get their dead phones working in few easy steps without paying few dollars on it.
Click to expand...
Click to collapse
S
Sir please help me out
I have Micromax a120 device. Few days back it got bricked it stuck on bootloop and not working even after factory reset moreover my pc is not recognizing mobile and display message as device descriptor request failed. I have installed all drivers
---------- Post added at 07:47 PM ---------- Previous post was at 07:47 PM ----------
Salman Al-Badgail said:
Reserved
Click to expand...
Click to collapse
Sir please help me out
I have Micromax a120 device. Few days back it got bricked it stuck on bootloop and not working even after factory reset moreover my pc is not recognizing mobile and display message as device descriptor request failed. I have installed all drivers
im having mt8127 mtk device it is not flashing iam having corrupted preloader i tried to flash the preloader it is not flashing , can any body knows to fix it??
How can a phone that's bricked be switched off? Am a bit confused.
Salman Al-Badgail said:
This thread is about how to recover the MTK Android phone, if it has gone Bricked (soft/hard/dead/etc)
THIS IS FOR INFORMATION ONLY.
Q. How Phone gets Bricked?
Ans : Basically, phone get bricked during the installation of Android OS (flashing).
Reason/why it happens
- If flashing is interrupted by low battery or loose cable connection during flashing.
- Using wrong firmware or a custom ROM (unstable) to flash your phone.
Result:
* Phone will not boot even after holding the power key and it will not accept charging. (Hard Brick / Dead Brick)
* Boot-Loop
* Restart loop
* No Recovery (In this situation, Hard Reset will not work)
Q. - Why Phone becomes dead (MTK Android Phone) ?
Ans : While installing Custom ROM or Stock firmware (unstable), Preloader (.bin) file becomes corrupted.
PRELOADER - It is the file in MTK android phone which helps to boot the phone.
Tools & Software Required:
SP Flash tool
Android Stock ROM
MTK USB Driver
PC / Laptop
Dead MTK Phone
USB cable.
NOTE: SP Flash tool has 3 Dropdown, Its meaning & How to use:
MOTA SIU : while choosing this function before clicking on Download, only boot, recovery and Android will be updated.
Format All + Download : while choosing this function before clicking on Download, it first erases the old Firmware then install new firmware. (Recommended when MTK phone stuck at logo & hard reset fails)
Firmware Upgrade: while choosing this function before clicking on Download, its update the Android version. (Recommended when installing a higher or lower version of Android manually)
Steps to Fix/Unbrick Dead Android (MTK) Phone
1- Install MTK driver.
2- Download the tool.
3- Unzip it and double click on Flash_tool.exe.
4- It will launch the tool.
5- Download Android stock ROM, unzip it.
6- Click on Scatter-Loading and assign the path of file (Select Firmware i.e. {.txt extension}).
7- Click on Download.
8- Switch off Mobile and connect it to PC using USB cable by pressing Volume down as boot key.
9- Flashing starts and when completed, Download OK will appear.
Also check Here for more Understanding, Special Thanks to @yuweng
Please let me know if anything is wrong here, so that I can make correction and help other member for better understanding.
Also hit THANKS button if you find this as useful info.
If you found this post helpful then don’t forget to share this post with other Android users so that they could get their dead phones working in few easy steps without paying few dollars on it.
Click to expand...
Click to collapse
i am trying to flash vivo s7 and the cable shake and since then the phone is dead, have flashed it several time, it complete but it refuse to on
I need help please
Basically I was flashing updates for my CUBOT Nova and everything was going fine and I tried out this custom recovery which wouldn't mount any partition so it didn't really suit me. And I did this a dozen of times with other recoveries and if anything happened I had the firmware in SP tools ready to be flashed and if I could save going to it I just used the fastboot to flash it, and so I decided to completly stop and just put my phone back to normal and because I done it before I formatted the whole flash, (and FYI every 2 times I plugged in the phone powered off my computer always searched for drivers in the windows update but it failed and so everything still worked) but after I formatted it and plugged it out and in to download the firmware, my computer successfully installed the drivers and at this moment I was like shoot so I tried to download and it didnt recognise my phone and so I uninstalled the driver my computer installed and see if it worked and it kept installing it again, so I decided to uninstall every mtk driver I had and rebooted, when I installed every single driver again it tried to download drivers from the windows update but it failed and on the sp flash tools it goes to 100% on the Downloading DA (so the red bar) and stays like that for a while and I get notifications that I have a unrecognisable usb device and after a while it gives me randomly 2 errors 0xC0050005 and 0XC0060001 and I know someone is going to tell me I dont have the right firmware or that it's not the right ones but it isn't I got from the official Cubot website and I got an early versions from firmwarefiles I think and none of them work, now I just have a phone without anything on it and I cant flash anything on it until I just hope someone would walk me through what to do I would appreciate so much I'm sorry I wrote so much as I had to explain in max detail as I could what happened!
netcrafy said:
How can a phone that's bricked be switched off? Am a bit confused.
Click to expand...
Click to collapse
i wanted to say the same thing, also i tried enter EDL for 2 days DD (helio G80) LMFAO
Hi there
I would like to know if you can help me in repairing my device.
So i wanted to do an upgrade on the tablet and i messed it up.
I was on CMW recovery at first and then i did a format on cache system and data. but when i wanted to flash the rom CM14.1 it fail and the devices restarted.
the screen goes on but i can see faint lines on the screen.
I did make a back up of the rom and tried to flash it back but it didnt work.
I used all the roms and it still didnt work. I tried many SP flash tool and formating and still not working. every single rom has been flash and all are green but the phone does not want to boot. i have youtube and followed the instructions and every single step i can think of but u have a gut feeling i am mssing something.
I cannot write SN on the fone as it will not work. i have uninstalled all the drivers re-install all the drivers did all the instruction that you have provided but still it will work.
the tablet does still detect on the PC and it does work. so basically it is in a bootloop but its not powering up. Some suggested using MRT TOOLS or MIRACLES but i have a problem with that as it always have a virus attached it to and when i download it the pc removes it. so i dont know where i can get a good crack tool.
i really need your help if you can.
Hello Guys
i closed SP tool while flashing
my phone : infinix hot 10s
i cant power on it and cant join fastboot and cant join bootloader
When i connect phone by orginial usb
computer said (USB not recoginzed)
i installed all drivers but now phone is dead and he was rooted so i cant going to warranty
how i fix it?
ok, so i have a rooted LG G Stylo from metro PCS V10j
i had katana installed on it and everything was working fine. someone got there hands on it who didnt know anything about rooting and such and turned off USB Debug mode and everything else now my phone gives me the feared
Secure Booting Error !
Error Code : 1003
i spend 8 hours searching for th estock KDZ file to fix it but no luck. so i decided to give LG Bridge a shot but my phone will not work on anything. i installed the universal drivers and nothing. sinc ei dont have USB Debug mode activated i cant install drivers or transfer anything. since i cant boot i cant change anything. it will NOT boot into recovery but it WILL boot into download mode.
How Screwed am i? is there anyway i can remotely turn USB debug back on through a program such as adb? i hope im not stuck with a paper weight
SOLUTION!
if you had the same issues as me then follow then do what i did to fix it
download the LG Flash Tool 2014 https://forum.xda-developers.com/showthread.php?t=2797190
then put your phone into download mode (Hold Volume Up while plugging in the USB to PC)
keep holding Volume Up Until The "Firmware update" screen shows
now download the Stock KDZ File here for v10j
https://drive.google.com/file/d/0B4ZddhtQCUXfSlBnUWhrRkVWdjA/view
once finished open LG FLash Tool 2014
click the little folder next to "Select KDZ File" Box
locate the KDZ in your download folder or wherever you save stuff
Normal flash lets you keep files
CSE Flash wipes the joint clean
let it run and do its thing
YOU WILL GET AN ERROR BUT IGNORE IT DO NOT CLOSE THE WINDOW JUST MOVE IT TO THE SIDE AND YOU WILL SEE THE TIMER STILL GOING AND YOUR PHONE WILL START TO MAKE PROGRESS
there ya go!
you fixed the Secure Booting Error