Hello everyone!
Unfortunately I've lost recovery option from my device and it says no command with triangular icon. I searched about this problem but still have not found any proper solution. I flashed my including new TWRP/ CWM recovery image with custom firmware using SP flash tool. But again it shows no command problem. I rooted my device and worked through Rom manager an may mores app but still couldn't fix it at all. Almost i am tired in order to solve it. Please help me. I hope you guys really help me to solve this problem.Thank you!
try rashr app
Related
Hi.. I installed Rom Manager onto my friends p500,it was rooted earlier.. but it did not have a custom recovery ..so i flashed the latest cmw through the rom manager app.
After which i selected to create a back up.. The mobile restarted (to enter the cmw recovery for backup operation).. but soon after the restart the mobile got stuck at the LG Logo.. I waited for about 10mins and it did not respond. Then i removed the battery and then power it on.. but it is stuck at the LG logo.. I am unable to get into custom recovery.. (power+home+volumeup).
Also, Mobile is not detected when connected to pc.
How to resolve this issue?? Please help
(I am able to get into emergency mode)
Double tread
Inviato dal mio LG-P500 con Tapatalk 2
??.. can u reply in english please.
problem solved.
CLOSE THREAD
help
clawsright said:
Hi.. I installed Rom Manager onto my friends p500,it was rooted earlier.. but it did not have a custom recovery ..so i flashed the latest cmw through the rom manager app.
After which i selected to create a back up.. The mobile restarted (to enter the cmw recovery for backup operation).. but soon after the restart the mobile got stuck at the LG Logo.. I waited for about 10mins and it did not respond. Then i removed the battery and then power it on.. but it is stuck at the LG logo.. I am unable to get into custom recovery.. (power+home+volumeup).
Also, Mobile is not detected when connected to pc.
How to resolve this issue?? Please help
(I am able to get into emergency mode)
Click to expand...
Click to collapse
I faced similar issue, and got it resolved by jtag.
now I am afraid to do custom recovery, can u tell me what went wrong and how to avoid.
I am on stock 2.3.3
thanks in advance.
Vipuljain_in said:
I faced similar issue, and got it resolved by jtag.
now I am afraid to do custom recovery, can u tell me what went wrong and how to avoid.
I am on stock 2.3.3
thanks in advance.
Click to expand...
Click to collapse
Even though the the P500 is "supported" by ROM Manager, ROM manager is extremely wonky with that device. ROM Manager is not the only way to install a recovery and IMHO is the worst way to manage that device. ADB, Fastboot, and FlashImageGUI are much safer alternatives. FlashImageGUI requires the 'flash_image' binary to be installed on the device. I've never seen it on a stock ROM for any device but it is usually included with custom ROMs. 'flash_image' can be extracted from /system/bin of any custom ROM and pushed to the device. FlashImageGUI can be downloaded from Play Store. The other two alternatives are a little more cumbersome, but just as effective.
I have written a Windows front-end for the fastboot executable called Android Flash Recovery. Assuming that your device drivers are correctly installed and the device can be booted in to fastboot mode, Android Flash Recovery can make recovery installation much easier. The link for AFR is in my signature.
clawsright said:
problem solved.
CLOSE THREAD
Click to expand...
Click to collapse
Thread closed
I found the location of the recovery partition " /dev/block/platform/sdhci-tegra.3/by-name/SOS" but how to change it .IMG format,?
Xolo play tab 7.0 stock recovery.img needed!
Hey man! I need your help as well as I can give you the solution.
Well the solution is I think you can extract the recovery.img using flashify app. Just download and select back up and back up recovery. Hopefully it should be in .img format
And there's not much development for xolo play tab 7.0 and I think you won't be finding cwm recovery for it. I have searched a lot but in vain.
And so I just flashed a wrong cwm recovery and my tab lost its recovery. Fearing my tab would get bricked any time I messed up and ended with soft bricking.
So the help I need from you is just use the flashify app and extract the recovery.img and send me that file to me by mail.
We ll discuss further when you reply man! I need your help badly! Waiting for your reply
I have sent you a private message also.
Friends
I rooted my Lenovo A390 using kingo root app. accidently i uninstalled System GUI from the system apps. after that its showing black screen only.but the icons are there..I tried to install sytem app in many ways.but its not loading ,finally i decided to reset the phon .but after resetting its agian showing that black screen only. then i tried to install the custom ROM and Official Lenovo A390 rom using SP Flash tools. But its showing the error "PMT changed for the ROM; it must be downloaded" . and tried to install using ROM tool box app from phon..it also fail...
please help me guys...Its my First experiment using my phone and its failed...My friends are not experts in android...
I dont know how to solve this
Please help me ....!!!
Hi there,
Please follow this threads and ask directly there if if have any other questions:
[Solved] Request for root, unlock , cwm recovery for Lenovo Ideaphone A390
[Q] Custom ROM for Lenovo A390
Good luck
Installing Clockworkmod Recovery on your Alcatel Onetouch Flash 6042D means that you will be able to flash new custom ROMs on it. Without custom recovery you cannot flash new ROMs. Also, it should be installed on rooted devices. Clockworkmod Recovery can also be used to backup your entire ROM.
WARNING: Installing a recovery may brick your phone...Don't Blame Me.. Do at your Own Risk...
Note:- Alcatel OneTouch Flash Recovery Uses a secured boot.img,so a custom recovery will cause boot loop..Please Download and Flash The unsecured boot.img from below link. And flash it with recovery..
You need:
1. A Windows PC
2. CWM recovery (Download)
3. Unsecured Boot.img (Download)
4. SP Flash tools (Download)
5. Driver (Download)
6. Scatter file (Download)
7.Alcatel Onetouch Flash 6042D
Follow these steps to flash custom recovery using sp flash tools:
Step 1: Extract/unzip all downloaded files.
Step 2: Open SP flash tool and load scatter file.
Step 3: Unselect all blocks and select only RECOVERY and BOOT.
Step 4: Click the location column of RECOVERY and BOOT and select downloaded
recovery and boot.
Step 5: Press and Volume Down + Power to Enter in CWM Recovery Mode.
If you face any problem contact me at facebook.....:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
THANK YOU VERY MUCH...
I have tried all the recovery on the net but they all get boot loop..
And they can't format data and factory reset...
Now it a humble request to port rom for this devices....
Biman94 said:
THANK YOU VERY MUCH...
I have tried all the recovery on the net but they all get boot loop..
And they can't format data and factory reset...
Now it a humble request to port rom for this devices....
Click to expand...
Click to collapse
Thanks for your review...
i am currently working on AICP ROM 5.1.1..
I will upload it within 2 days...
Be Tuned....:highfive: :highfive: :highfive:
Okkk
I am waiting for it...
connecting in sp flash & mtk droid tools.
hai there
I have a peculiar problem here. I am not a programmer or some thing like that. But an avid fan of android.
I am not able to get my rooted 6042d detected in SP FT & MTK droid tools to take a back up. My system is Win.XP [SP3]. I even formatted the system twice to remove left overs. Even, I am clue less how to get it done. I installed the drivers provided by you. I think my ignorance of windows is the main hurdle here. Can you please guide me - how to? Sorry for the bother.
I wish to flash the secure CWM made by you and the LP style rom followed by it.
1. spft says 'the application failed to start because the application configuration is incorrect....reinstall..'
2.mtk droid tools says 'the device is not revealed.. connect or reconnect...' - on the right side -' in system already available android debug bridge 1.0.26'
thanks
PS: I know how to use both the tools, I did it with my previous device, also of MTK-zte.
Solution of your problem....
pinakini said:
hai there
I have a peculiar problem here. I am not a programmer or some thing like that. But an avid fan of android.
I am not able to get my rooted 6042d detected in SP FT & MTK droid tools to take a back up. My system is Win.XP [SP3]. I even formatted the system twice to remove left overs. Even, I am clue less how to get it done. I installed the drivers provided by you. I think my ignorance of windows is the main hurdle here. Can you please guide me - how to? Sorry for the bother.
I wish to flash the secure CWM made by you and the LP style rom followed by it.
1. spft says 'the application failed to start because the application configuration is incorrect....reinstall..'
2.mtk droid tools says 'the device is not revealed.. connect or reconnect...' - on the right side -' in system already available android debug bridge 1.0.26'
thanks
PS: I know how to use both the tools, I did it with my previous device, also of MTK-zte.
Click to expand...
Click to collapse
I recomend u to go to this link to solve your Spft problem...
and i think u must download your stock rom instead of making backup...
after this problem solved try to flash unsecured boot.img first..
then u can try flashing My CWM recovery or Philz Recovery
(philz recovery can be found here...)
and got to this link
you can understand what is your problem connecting in mtk driod tool...
I think u must flash it.. because its the problem of your phone...
and if u face any problem contact me or for instant help just take the help of Google BABA!!!...
thanks for the swift reply.
SPFT problem solved as you suggested. But the problem with DT persists.
I do not have the stock rom of onetouch flash 6042d. [ my device is wrongly showing idol3!]
I want to have a SPFT back up in Droid Tools to be on safe side with imie etc. [being able to run Droid tools.]
I highly appreciate what ever the hints/advice I need in this regard, if extended.
When your LP themed rom for our device will be out?
pinakini said:
thanks for the swift reply.
SPFT problem solved as you suggested. But the problem with DT persists.
I do not have the stock rom of onetouch flash 6042d. [ my device is wrongly showing idol3!]
I want to have a SPFT back up in Droid Tools to be on safe side with imie etc. [being able to run Droid tools.]
I highly appreciate what ever the hints/advice I need in this regard, if extended.
When your LP themed rom for our device will be out?
Click to expand...
Click to collapse
Here Check This Website......
After that I hope U can Understand your problem.....
Then Uninstall any previous driver installed of your phone on your pc....
then install the driver mention above....
and after that if the problem remains try to download and install proper adb driver by this....
Dear Team,
I recently flashed my mmx a311 through YGDP v3.83, and it was completed successfully. But when I switched on my handset, it still hangs at micromax logo. I am unable to counter the issue, though I have tried to flash again and again, but the problem persists.
Please help me out with the issue.
Recovery mode is also not responding........and I am hopelessly stuck.
Bhawikverma said:
Dear Team,
I recently flashed my mmx a311 through YGDP v3.83, and it was completed successfully. But when I switched on my handset, it still hangs at micromax logo. I am unable to counter the issue, though I have tried to flash again and again, but the problem persists.
Please help me out with the issue.
Recovery mode is also not responding........and I am hopelessly stuck.
Click to expand...
Click to collapse
Did you try re-flashing TWRP using fastboot?
can u tell me the procedure for flashing TWRP??
Actually, I tried flashing TWRP via fastboot, but I didn't succeeded. Though the system is detecting the device and the driver present is coolpad android adb interface, but whenever I try to flash TWRP, cmd doesn't detect the device. It still shows "waiting for device".