Dear Team,
I recently flashed my mmx a311 through YGDP v3.83, and it was completed successfully. But when I switched on my handset, it still hangs at micromax logo. I am unable to counter the issue, though I have tried to flash again and again, but the problem persists.
Please help me out with the issue.
Recovery mode is also not responding........and I am hopelessly stuck.
Bhawikverma said:
Dear Team,
I recently flashed my mmx a311 through YGDP v3.83, and it was completed successfully. But when I switched on my handset, it still hangs at micromax logo. I am unable to counter the issue, though I have tried to flash again and again, but the problem persists.
Please help me out with the issue.
Recovery mode is also not responding........and I am hopelessly stuck.
Click to expand...
Click to collapse
Did you try re-flashing TWRP using fastboot?
can u tell me the procedure for flashing TWRP??
Actually, I tried flashing TWRP via fastboot, but I didn't succeeded. Though the system is detecting the device and the driver present is coolpad android adb interface, but whenever I try to flash TWRP, cmd doesn't detect the device. It still shows "waiting for device".
Related
Hi all,
I have a Micromax A110 on which i flashed Ultimate+Galaxy+V4+-+Genuine+Note+3+++S5+UI ROM and BindaasBoost Kernel.
Playstore was not working on this since the ROM installation and it said No Connection always. As suggested by most people i tried some basic steps which didnt work and as final step i did a "Restore to factory Default". Since then the cell is not booting to ROM.(Bricked) :crying:
Its neither getting to CWM recovery as well. Its showing the Note3 logo and then restarts itself. When holding the Power+up+down keys its shows the First screen of recovery mode but soon again shows Note3 boot logo and reboots. Not able to do anything.
Please help Guys !!!
fastboot or adb
VickyPonting said:
Hi all,
I have a Micromax A110 on which i flashed Ultimate+Galaxy+V4+-+Genuine+Note+3+++S5+UI ROM and BindaasBoost Kernel.
Playstore was not working on this since the ROM installation and it said No Connection always. As suggested by most people i tried some basic steps which didnt work and as final step i did a "Restore to factory Default". Since then the cell is not booting to ROM.(Bricked) :crying:
Its neither getting to CWM recovery as well. Its showing the Note3 logo and then restarts itself. When holding the Power+up+down keys its shows the First screen of recovery mode but soon again shows Note3 boot logo and reboots. Not able to do anything.
Please help Guys !!!
Click to expand...
Click to collapse
Can you able to access fastboot or adb ?
Installing SDK ADT
Sakthivel_Subbiah said:
Can you able to access fastboot or adb ?
Click to expand...
Click to collapse
Downloading SDK ADT bundle to check that... (Fingers crossed)
Sakthivel_Subbiah said:
Can you able to access fastboot or adb ?
Click to expand...
Click to collapse
Not getting to ADB or Fastboot as well.. Please help !!!!
Eureka
OMG Finally got it to work.....
Flashing the stock ROM from sptools worked.
I had tried this very first at the beginning but it was not working because incorrect drivers for the cell were installed on my PC (PDANet and vcom)
I removed the incorrect MT65XX drivers using "usbdeview-x64" software.
And then installed the "MT6577 USB VCOM drivers"
then flashed the stock ROM via SPTOOLS and it worked fine..:good:
{ Gosh !!! This was so imp to work as its my WIFE's phone }
VickyPonting said:
OMG Finally got it to work.....
Flashing the stock ROM from sptools worked.
I had tried this very first at the beginning but it was not working because incorrect drivers for the cell were installed on my PC (PDANet and vcom)
I removed the incorrect MT65XX drivers using "usbdeview-x64" software.
And then installed the "MT6577 USB VCOM drivers"
then flashed the stock ROM via SPTOOLS and it worked fine..:good:
{ Gosh !!! This was so imp to work as its my WIFE's phone }
Click to expand...
Click to collapse
:good: always take a backup of your rom... if anything happens you can restore it congrats that you saved your phone...
Hi guys,
My MICROMAX CANVAS A117 is stuck on boot logo\screen.
I tried to flash twrp recovery using Mobile Uncle Tools and i booted to recovery after the install. But the recovery didnt appear and my phone rebooted on its own. HELP! only factory mode is available idk about it. HOW TO RECOVER MY PHONE.??
PLEASE COMMENT ANY POSSIBLE METHOD USing SP FLASH TOOLS.
XdaPoseidon said:
Hi guys,
My MICROMAX CANVAS A117 is stuck on boot logo\screen.
I tried to flash twrp recovery using Mobile Uncle Tools and i booted to recovery after the install. But the recovery didnt appear and my phone rebooted on its own. HELP! only factory mode is available idk about it. HOW TO RECOVER MY PHONE.??
PLEASE COMMENT ANY POSSIBLE METHOD USing SP FLASH TOOLS.
Click to expand...
Click to collapse
just flash stock recovery from sp slash tool....deselecting everything else
If that does not work....flash the whole stock rom
Hey..
Thnx for the reply..I will try it out.
Were u successful in doing it? Pls help mr too as m also stuck kn boot logo .. A117..rply asap
A MICROMAX A63 PHONE GOT STUCK AND IS NOT BOOTING .IT ONLY SHOWS CANVAS LOGO AND STUCKS AGAIN.It only shows charging on connectimg with pc and adb driver don't recognises this device.I Tried hard mode factory reset and booting but behaved in the same manner and stucked on it's logo.
Please anyone help me to recover my phone.
Did you try to flash something? If you have a backup. Then restore or flash a custom or stock ROM via recovery or download mode
My device is an 8GB Unite 2 which was OTA updated to LP. I was trying to flash a custom recovery, TWRP 3.0.2-1 by @Hell7
http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-2-1-recovery-micromax-t3368507.
I flashed the same using Flashify at first which returned an error so I tried with Hashr which flashed it successfully. But rebooting to recovery only shows up a fading Micromax logo after which the device just restarts itself. Thereafter I tried another one
http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-1-0-micromax-unite2-t3354392,
which managed to do nothing as well. Also tried Philz Touch Recovery, which also met the same fate. Then I tried flashing recovery using SP Tools with the available scatter file but then SP Tools failed to detect the device (it just detects the driver but loses it soon after). I tried resetting the device but that too failed and the device restarted after showing the same fading logo. I kinda understand that the recovery partition is failing to boot. But now how can I get back to at least stock recovery so I can reset or use SP Tools. Besides, my boot loader page is also not showing up(the one with all the selections). Did I make any mistake in flashing KK recoveries over an LP ROM?(but all of the recovery threads have posts indicating that they work in LP as well ) Any help would be appreciated.....:crying:
It seems that MMX has locked the Bootloader after the LP OTA update. So try booting to fastboot and then with a connected PC, unlock the Bootloader with the fastboot oem unlock command. Then use SP Tools to flash a custom recovery. I've seen that this takes a few tries so go at it again and again, removing and reconnecting the usb cable until the flashing occurs(of course, assuming that you have all necessary usb drivers installed). Philz and TWRP themed version seems to be working fine(haven't thoroughly checked the others).
akhil4845 said:
My device is an 8GB Unite 2 which was OTA updated to LP. I was trying to flash a custom recovery, TWRP 3.0.2-1 by @Hell7
http://forum.xda-developers.com/uni...very-twrp-3-0-2-1-recovery-micromax-t3368507.
I flashed the same using Flashify at first which returned an error so I tried with Hashr which flashed it successfully. But rebooting to recovery only shows up a fading Micromax logo after which the device just restarts itself. Thereafter I tried another one
http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-1-0-micromax-unite2-t3354392,
which managed to do nothing as well. Also tried Philz Touch Recovery, which also met the same fate. Then I tried flashing recovery using SP Tools with the available scatter file but then SP Tools failed to detect the device (it just detects the driver but loses it soon after). I tried resetting the device but that too failed and the device restarted after showing the same fading logo. I kinda understand that the recovery partition is failing to boot. But now how can I get back to at least stock recovery so I can reset or use SP Tools. Besides, my boot loader page is also not showing up(the one with all the selections). Did I make any mistake in flashing KK recoveries over an LP ROM?(but all of the recovery threads have posts indicating that they work in LP as well ) Any help would be appreciated.....:crying:
Click to expand...
Click to collapse
Uhh no, you can't flash any recovery in LP with apps,
And now u have lost ur recovery, just flash it witj SP Flash Tool, simple!
Yeah I got it...... Thank you all
ChahatGupta said:
Uhh no, you can't flash any recovery in LP with apps,
And now u have lost ur recovery, just flash it witj SP Flash Tool, simple!
Click to expand...
Click to collapse
hi sir i am having micromax unite 2 A106 i rooted my phone with king root it is successful but problem is with custom rom i could not boot into custom recovery, micromax logo fades followed by black screen and restarts.
i tried installing custom rom with uncle tools same problem
i tried with su flash tool using laptop same problem (i am getting successful msg)
note: my internal storage is 4gb and my phone storage is 2.5gb
please help me in this regard.
vasup0261 said:
hi sir i am having micromax unite 2 A106 i rooted my phone with king root it is successful but problem is with custom rom i could not boot into custom recovery, micromax logo fades followed by black screen and restarts.
i tried installing custom rom with uncle tools same problem
i tried with su flash tool using laptop same problem (i am getting successful msg)
note: my internal storage is 4gb and my phone storage is 2.5gb
please help me in this regard.
Click to expand...
Click to collapse
hi can some one help me out with this.
Please.
I had the same problem. Try to install stock rom with pc it will get back stock recovery
Hi Friends,
I have a Micromax AQ4501 which is bricked now. So I am expecting a solution.
All which was Happened is as follows:
1. I was unable to turn the WiFi and WiFi hotspot on so I did a system restore but Nothing worked out.
2. I tried to Flash the stock rom through SP tool version 3.1344.214 and It was completed successfully.
3. Even after Flashing, It did not turn on and then no boot logo no charging but still It was being detected by Windows.
4. I had successfully flashed it many times through Download mode and firmware Upgrade mode, even using the latest Sp tool and Even using two versions of its official firmwares. (Micromax_AQ4501_V3_23.03.15 and Micromax_AQ4501_V9_29.08.14)
But Still It was not turning on and Still Windows can detect it.
So Now It's not Hardware bricked but still can't see the boot logo and it's not even charging. So If you guys have a solution.... then DO share ASAP. And help Me.
Thank You
I flashed the Karbonn Sparkle V's firmware using SP flash tool and It worked...