i have a phone called archos 40 b titanium ... i was using a custom rom and it was working fine but i did format whole flash using my original rom scatter file ... it was success .. then i tried to flash my phone with my original rom but when i clicked on download .. this message appeared : Broom error : s_dl_get_dram_setting_fail(5054) ... now my device is completely dead and i don't know what to do .... plz some one help me
N.B : someone help me to get the file preloader.bin because i haven't it and i think it will help me in this problem
http://forum.xda-developers.com/showthread.php?t=2580150
MrHollywood said:
http://forum.xda-developers.com/showthread.php?t=2580150
Click to expand...
Click to collapse
thank you .. but it doesn't help me
shorombo said:
thank you .. but it doesn't help me
Click to expand...
Click to collapse
Isn't that the same issue you're facing?
Related
One of my friend, has soft bricked his 9003, It seems that , data partition has got corrupted ...
I have tried flashing full firmware with re partition but no help !!!
so, before taking this phone to service center, i would like to give a last try by flashing dbdata.rfs !!!
Can someone provide the same ?
Thank you in advance.
Virtualsk said:
One of my friend, has soft bricked his 9003, It seems that , data partition has got corrupted ...
I have tried flashing full firmware with re partition but no help !!!
so, before taking this phone to service center, i would like to give a last try by flashing dbdata.rfs !!!
Can someone provide the same ?
Thank you in advance.
Click to expand...
Click to collapse
Have he installed the CWM Recovery? If not flsh it... go into recovery and try to mount or format from there... if this cannot help post the log here (/tmp/recovery.log)
Virtualsk said:
One of my friend, has soft bricked his 9003, It seems that , data partition has got corrupted ...
I have tried flashing full firmware with re partition but no help !!!
so, before taking this phone to service center, i would like to give a last try by flashing dbdata.rfs !!!
Can someone provide the same ?
Thank you in advance.
Click to expand...
Click to collapse
Search for latona_20110114.pit, download and flash I9003XXKB3
farodriguez said:
Search for latona_20110114.pit, download and flash I9003XXKB3
Click to expand...
Click to collapse
Dude this thread is more than a year old!
Sent from my GT-I9003
But still. Can somebody share the .rfs file ? I need it too.
my qmobile a10 not going to cwm recovery mode
i copy the cwm in sdcard recovery.img
still not going plz help me
thanx in advance
m3hm00d said:
my qmobile a10 not going to cwm recovery mode
i copy the cwm in sdcard recovery.img
still not going plz help me
thanx in advance
Click to expand...
Click to collapse
I think you are using JB. You have to use sp flash tool for flashing cmw recovery.
Kindly Press Thanks instead of saying.
Brother i flash with sp but not going to cwm......i need also all files for flashing noir a10.
plz help anyone can provide me flashing files?
andeveloper said:
I think you are using JB. You have to use sp flash tool for flashing cmw recovery.
Kindly Press Thanks instead of saying.
Click to expand...
Click to collapse
same problem but sp tool gives brom error s_ft_need_download_all_fail
i have the same problem with the same handset as described by the user. but i also get this error when trying to flash with sp tool .ERROR:brom error s_ft_need_download_all_fail . my phone is bricked and i am panicked please help.ASAP.Please
finally i send to my cell CUSTOMER CARE CENTER.............
tanveerkhan1 said:
i have the same problem with the same handset as described by the user. but i also get this error when trying to flash with sp tool .ERROR:brom error s_ft_need_download_all_fail . my phone is bricked and i am panicked please help.ASAP.Please
Click to expand...
Click to collapse
tanveerkhan1 said:
i have the same problem with the same handset as described by the user. but i also get this error when trying to flash with sp tool .ERROR:brom error s_ft_need_download_all_fail . my phone is bricked and i am panicked please help.ASAP.Please
Click to expand...
Click to collapse
You are missing something
brother can u post complete tutorial for cwm recovery for a10?
thanx in advance
saadmshk said:
You are missing something
Click to expand...
Click to collapse
Hi!
I have tried all different kinds of stock firmwares including India, Germany... Odin starts succesfully, finishes, but when it goes to recovery mode it shows data error:
it says that system/csc/TWO/system is missing.. also i can't apply sd card update.. I tried both cache and data reset.. Nothing works
Please help
Hi follow that thread pls.
http://forum.xda-developers.com/showthread.php?p=51886671#post51886671
ahmetakin said:
Hi follow that thread pls.
http://forum.xda-developers.com/showthread.php?p=51886671#post51886671
Click to expand...
Click to collapse
This topic isn't answering anything..
The thing is that i can flash to stock.. i goes well.. but after flashing i'm stuck with bootloop..
I thing i need 4 file rom.. i only found 1 file rom from sammmobile.com
I did it.. I needed to flash it with 4 file firmware
It looks like it was something wrong with csc or something like that
Thanks!
plzzzz tell me the linkkkk.......
where u found the 4 file firmware
i have this error
Sanjay(SUN) said:
plzzzz tell me the linkkkk.......
where u found the 4 file firmware
i have this error
Click to expand...
Click to collapse
you can download firmwares at
sammobile.com .Just create ur
account and then u can download.
sana415 said:
you can download firmwares at
sammobile.com .Just create ur
account and then u can download.
Click to expand...
Click to collapse
Absolutely!!
I tried online method which shows ‘AT+EGMR=1,7...but did not worked it shows :THIS COMMAND IS NOT ALLOWED IN USERBUILD"
HOW TO SOLVE?
Plz reply soon phone is on without network
PLZ REPLY
ashuchem said:
I tried online method which shows ‘AT+EGMR=1,7...but did not worked it shows :THIS COMMAND IS NOT ALLOWED IN USERBUILD"
HOW TO SOLVE?
Click to expand...
Click to collapse
see this post
http://forum.xda-developers.com/showpost.php?p=54727236&postcount=1
Thank you very much
Solved
ashuchem said:
Solved
Click to expand...
Click to collapse
U can always hit the thanks button
help
avi3230 said:
see this post
http://forum.xda-developers.com/showpost.php?p=54727236&postcount=1
Click to expand...
Click to collapse
it is not flashing installation aborted
smahalgavaiya said:
it is not flashing installation aborted
Click to expand...
Click to collapse
Just flash philz or ctr recovery and then flash the created zip via it.
but what u were doing so u got invalid imei
sim card not detected after flashing KK stock rom plz help fast this method not working
yashsartanpara said:
sim card not detected after flashing KK stock rom plz help fast this method not working
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=ierbMHOQGeQ&feature=player_embedded
http://cprcellphonerepair.blogspot.in/2014/10/mt6592-mt6589-mt6582-mt6572-mtk-change.html
mtkdroid method isnt working
i was just flashing stock kk after trying hive ui but in between ..my laptops power went off...and after flashing kk stock rom again i got invalid imei error.... (i flashed stock kk more then 10 times before but never got this problem)
Can costumer care fix this?
yashsartanpara said:
mtkdroid method isnt working
i was just flashing stock kk after trying hive ui but in between ..my laptops power went off...and after flashing kk stock rom again i got invalid imei error.... (i flashed stock kk more then 10 times before but never got this problem)
Can costumer care fix this?
Click to expand...
Click to collapse
flash with format + download option.
then try mtk droid tool method
Use sn write station
Sent from my Q3000 using XDA Free mobile app
Fixed
Thank you ... Fixed problem
Format + Download kk rom and then flashed imei_flashable using cwm
thank you
Nice
Sent from my Q3000 using XDA Free mobile app
Any body have Ubuntu linux, i need disk image
sachin.r.fulzele said:
Any body have Ubuntu linux, i need disk image
Click to expand...
Click to collapse
what disk image u need.
do u work on ubuntu.
If yes i need ur help in compiling kernel and drivers for xolo q3000.
if we build it we can port CM11 and other such roms.
u can download ubuntu from their website for free.
I'm also looking it for the same purpose, bt nw I've exams from 1st dec , so we will try this after exams over. Thanx doc
Sent from my Q3000 using XDA Free mobile app
Maybe formatted phone or by installing kitkat for q3000.. it's like hard brick .. please someone help ..:crying::crying::crying:
AAAni said:
Maybe formatted phone or by installing kitkat for q3000.. it's like hard brick .. please someone help ..:crying::crying::crying:
Click to expand...
Click to collapse
is it booting and can u go in recovery mode...
AAAni said:
Maybe formatted phone or by installing kitkat for q3000.. it's like hard brick .. please someone help ..:crying::crying::crying:
Click to expand...
Click to collapse
Simply downgrade to Jelly bean!
Hi guys plz help me to solve this problem : Error 4032 (Enable DRAM FAILED) when trying to flash
not booting.. not even showing charging.. sp tool says
Error 4032 (Enable DRAM FAILED).. no recovery.. :crying:
AAAni said:
Hi guys plz help me to solve this problem : Error 4032 (Enable DRAM FAILED) when trying to flash
Click to expand...
Click to collapse
Uninstall drivers from pc and reinstall them correctly, then flash it again.
Sent from my XOLO Q3000
not helping..:crying:
AAAni said:
not helping..:crying:
Click to expand...
Click to collapse
U need to flash whole stock rom either Jelly bean or kitkat as u like.
Xolo Q3000 KK S007 27-05-2014.zip
q3000 stock jb 4.2 s011.7z
download one of above as per ur chioce.
extract it in folder.
download sp flash tools.
Extract it in a folder.
Start sptools.exe
choose scatter loading.
select scatter file from above downloaded firmware folder.
select firmware upgrade.
press download
connect ur mobile in switch off condition.
wait till green circle appears.
Start u mobile.
U need drivers installed before the procedure.
tried every sp tool version ..:crying:
tried many rom ..:crying:
even official roms from needrom.com and androidxda.com
and also the link you've given..(Xolo Q3000 KK S007 27-05-2014.zip & q3000 stock jb 4.2 s011.7z ):crying:
but same error :crying:
BROOM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM failed!
[HINT]:
please check your load matches to your target which is to be downloaded
please someone help me out..:crying:
AAAni said:
tried every sp tool version ..:crying:
tried many rom ..:crying:
even official roms from needrom.com and androidxda.com
and also the link you've given..(Xolo Q3000 KK S007 27-05-2014.zip & q3000 stock jb 4.2 s011.7z ):crying:
but same error :crying:
BROOM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM failed!
[HINT]:
please check your load matches to your target which is to be downloaded
please someone help me out..:crying:
Click to expand...
Click to collapse
Just explain each step u doing from the very beginning?
Have u selected firmware upgrade option??
Also post some screenshots
My phone was dead after I formatted with option of "format all + download " in sp tool:crying:
was using "PXZ2-4.3.5-q3000 working" and tried to flash "Xolo Q3000 KK S007 27-05-2014" but i think the process was not successful :crying: and now my phone behave like hard brick but it still recognize by pc without battery but usb port disappear frequently ..
I found 1 solution .. can any one upload backup rom of q3000 using "MTK droid tools" please please please .. http://forum.xda-developers.com/showthread.php?t=2447431&page=5 avi3230 bro ... can you make attachment like in this link of preloder and scatter file for q3ooo?
AAAni said:
My phone was dead after I formatted with option of "format all + download " in sp tool:crying:
was using "PXZ2-4.3.5-q3000 working" and tried to flash "Xolo Q3000 KK S007 27-05-2014" but i think the process was not successful :crying: and now my phone behave like hard brick but it still recognize by pc without battery but usb port disappear frequently ..
I found 1 solution .. can any one upload backup rom of q3000 using "MTK droid tools" please please please .. http://forum.xda-developers.com/showthread.php?t=2447431&page=5 avi3230 bro ... can you make attachment like in this link of preloder and scatter file for q3ooo?
Click to expand...
Click to collapse
Just flash the "Xolo Q3000 KK S007 27-05-2014" firmware as normal, everything will be fine.
Just select firmware upgrade option.
These files are all base files including preloader and scatter ok.
Ur error is cause u formatted preloader , just restore preloader ur phone will boot. :good::good:
If still u cant do it, just PM me.
see this.. error remain same :crying::crying::crying:
Lets start from the base,
Which version of windows r u using & did u hv admin rights?
Sent from my XOLO Q3000 using XDA Free mobile app
tired windows 8.1 32bit & 64 bit, windows 7 32bit with administrative right
In windows 7, install 32 bit drivers, download so flash tool from mtk's official site and flash stock job if ur phone u received with jb ROM else flash kk rom. Flash phone without battery, sim n memory card. Also before flashing, connect our phone with battery inserted and power on. Look whether driver is installed. Drivers to install: mobistel cynus, vcom, pdanet and adb drivers.
Sent from my Q3000 using XDA Free mobile app
its better to take it xolo care..they might charge u but atleast u will get ur phone back...
Same thing happend to me ...
:crying: :crying: After doing a "whole flash format " ... I am able to flash (XOLO Q3000) STOCK ROMS successfully ... But when i start my phone it gets STUCK on BOOTLOOP .... it not charging too..... PLZ HELP ME GUYZ ... wats going wrong here ??? :crying::crying:
---------- Post added at 12:40 PM ---------- Previous post was at 12:35 PM ----------
davis.arkel said:
:crying: :crying: After doing a "whole flash format " ... I am able to flash (XOLO Q3000) STOCK ROMS successfully ... But when i start my phone it gets STUCK on BOOTLOOP .... it not charging too..... PLZ HELP ME GUYZ ... wats going wrong here ??? :crying::crying:
Click to expand...
Click to collapse
and its not entering CUSTOM RECOVERY MODE ALSO (after flashing custom recovery ).. PLZ PLZ PLZ HELP GUYZ ...
davis.arkel said:
:crying: :crying: After doing a "whole flash format " ... I am able to flash (XOLO Q3000) STOCK ROMS successfully ... But when i start my phone it gets STUCK on BOOTLOOP .... it not charging too..... PLZ HELP ME GUYZ ... wats going wrong here ??? :crying::crying:
---------- Post added at 12:40 PM ---------- Previous post was at 12:35 PM ----------
and its not entering CUSTOM RECOVERY MODE ALSO (after flashing custom recovery ).. PLZ PLZ PLZ HELP GUYZ ...
Click to expand...
Click to collapse
Please explain the procedure u followed mentioning the stock rom links.
avi3230 said:
Please explain the procedure u followed mentioning the stock rom links.
Click to expand...
Click to collapse
Well, i was using HNY 15 series ROM(rooted)... and My battery was a bit low .... and the rom had fair number of ISSUES and BUGS ... so i booted into recovery mode and tried to instal a backup to RESTORE the stock version of android, I was using before .... it failed to complete that and got bricked .....
Every tym i started the phone it got stuck in boot loop .... I tried to flash the stock rom (2 -3 times) ( which i flashed before and was using it )...
BUT NO LUCK ... it did the same bootloop thing ...I tried to enter custom recovery (after flashing philz recovery immediately after flashing the rom )...it worrked 2-3 times but after then, no luck , i wasn't able to boot into recovery also ...
SO I got fed-up and made A "WHOLE FORMAT FLASH" (using sp flash tools) ....
After that my device was detected as UNKNOWN DEVICE ... then i searched the forums and was able to install drivers FOR WINDOWS 8......
and i was able to flash again .... later i tried the rom " XOLO Q3000 KK S007 27-05-2014" and stock rom from some website (the one which i was using before)
and one more "XOLO Q3000 S003 15102013" both the first and last roms were given by (xda xolo q3000 member .... i dont remember his name .. but i guess you know him)
1 out of 5 times i am able to get into recovery mode (after flashing custom recovery ) ..... once in CR mode I tried to format INTERNAL SD and it showed " "ERROR : unable to format internal storage "
AND i did a memory test also and everything was good except ERROR: NAND FLASH NOT FOUND .....
.. THANKS IN ADVANCD .... PLz Help
davis.arkel said:
Well, i was using HNY 15 series ROM(rooted)... and My battery was a bit low .... and the rom had fair number of ISSUES and BUGS ... ........
Click to expand...
Click to collapse
follow this link.
use sptools.
if u use version 3 use firmware upgrrade option.
if u use version 5 use fomat+dowload option.