Related
Alright so, I'm trying to flash my QMobile Noir A2, also known as MyPhone A818 also known as MicroMax A45 PUNK. But qMobile is different, same firmware but when i turn off the phone, remove batter, re insert and plug it in. PC Detects the "MT65x PreLoader" And so does the SP Flash tool which I use to flash a custom ROM (Pre-Rooted) to the phone. But then, my phone shows the battery charging logo and PC no longer detects it. Is there anyway I can get around this? I tried EVERY method of rooting so please don't mention that.
Thanks
HOLY ****Z
Also, my phones using MT6575 processor which is better than MicroMax's MT6563 processer, I tried rooting using the MT6563 method and flashing but again as mentioned above. PreLoader won't work
Have you solved it yet?
The Prince1 said:
Have you solved it yet?
Click to expand...
Click to collapse
NO
rayyan777 said:
no
Click to expand...
Click to collapse
help me someone. I tried every method, pc just detects then undetects preloader drivers
rayyan777 said:
help me someone. I tried every method, pc just detects then undetects preloader drivers
Click to expand...
Click to collapse
somebody help dammit this is so annoying why wont anyone help?!
Rayyan777 said:
somebody help dammit this is so annoying why wont anyone help?!
Click to expand...
Click to collapse
If someone knew how, they would help. No need to get angry and swear.
raayan how did u setup sp flashtool to flash rooted img on A2 i have also NOIR A2 but i always get the error cannot pass boot rom through usb error when i flash using sp flash tool how did u get pass that error plz inform me the correct method u use to flash ur a2 it will help us all plz share the method
mega_man said:
raayan how did u setup sp flashtool to flash rooted img on A2 i have also NOIR A2 but i always get the error cannot pass boot rom through usb error when i flash using sp flash tool how did u get pass that error plz inform me the correct method u use to flash ur a2 it will help us all plz share the method
Click to expand...
Click to collapse
megA_man, I get the SAME error now. It just says [BROM] Cannot pass boot rom command through usb. Please tell me if you have a solution!
Hi all,
I have a xolo a800 . i was able to root it when i got the phone using bin4ary root method as i had ICS on the phone.
However after updating the phone i am not able to rrot the phone using the same method. I do have the recovery image for the xolo a800 but i really dont know how to root the phone. i tried the SP tools method but my phone doesnt do anything after i do the write memory. i guess im missing out on the scattered file and also the hex values.
Can somebody please help me with a step by step method for rooting the xolo a800 with official jellybean update ( not ICS xolo a800).
Im eagerly waiting.
Thanking you in advance....plzzzzzzzzzz !!! :laugh::laugh::laugh:
kaustav.arsenal said:
Hi all,
I have a xolo a800 . i was able to root it when i got the phone using bin4ary root method as i had ICS on the phone.
However after updating the phone i am not able to rrot the phone using the same method. I do have the recovery image for the xolo a800 but i really dont know how to root the phone. i tried the SP tools method but my phone doesnt do anything after i do the write memory. i guess im missing out on the scattered file and also the hex values.
Can somebody please help me with a step by step method for rooting the xolo a800 with official jellybean update ( not ICS xolo a800).
Im eagerly waiting.
Thanking you in advance....plzzzzzzzzzz !!! :laugh::laugh::laugh:
Click to expand...
Click to collapse
Hey Kaustav,
Even i have the same problem and tried many websites and posted my problem and didn't get any answer from either of them even xda doesnt have the answer. Or may be no one is able to root the phone:crying:
Did u followed all steps in bina4root
Sent from my Micromax A50 using Tapatalk 2
Xolo a800 Jelly Bean Root
Hey Guys,
I cracked how to root xolo a800 jelly bean .
First download the cwm recovery from xda and download mt6577 scattering file. Now download sp flash tool and super user zip file from anywhere and follow the sp tool flashing process. After flashing the recovery through sp flash tool enter recovery \by holding power and vol up and flash the super user zip and you are done
:good::good::good::good:
Siddhartha9964 said:
Hey Guys,
I cracked how to root xolo a800 jelly bean .
First download the cwm recovery from xda and download mt6577 scattering file. Now download sp flash tool and super user zip file from anywhere and follow the sp tool flashing process. After flashing the recovery through sp flash tool enter recovery \by holding power and vol up and flash the super user zip and you are done
:good::good::good::good:
Click to expand...
Click to collapse
hey siddhartha,
i tried using the sp flash tools.. can you give me more details, lke whats the hex value and how do i get the scattered file???
please.... desparately awaiting for your reply..
thanks in advance.
kaustav
kaustav.arsenal said:
hey siddhartha,
i tried using the sp flash tools.. can you give me more details, lke whats the hex value and how do i get the scattered file???
please.... desparately awaiting for your reply..
thanks in advance.
kaustav
Click to expand...
Click to collapse
hey siddhartha... this time i was able to use the sp flash tool, however after flashing i get the green circle but then i cant get into recovery.. tried a lot... please, if you can send me screen shots or a step by step procedure of doing the same...
looking forward to hear from you...
kaustav.arsenal said:
hey siddhartha... this time i was able to use the sp flash tool, however after flashing i get the green circle but then i cant get into recovery.. tried a lot... please, if you can send me screen shots or a step by step procedure of doing the same...
looking forward to hear from you...
Click to expand...
Click to collapse
hey kaustav,
To get into recovery mode you have to hold power button and vol up button. And after you are in recovery mode you have to flash the super su zip that i had told you. It will flash and when rebooting the recovery will tell you that The rom will flash stock recovery if you want the stock recovery you press go back and if you want cwm recovery you press yes
Siddhartha9964 said:
hey kaustav,
To get into recovery mode you have to hold power button and vol up button. And after you are in recovery mode you have to flash the super su zip that i had told you. It will flash and when rebooting the recovery will tell you that The rom will flash stock recovery if you want the stock recovery you press go back and if you want cwm recovery you press yes
Click to expand...
Click to collapse
hey siddhartha,
i am able to get into the recovery mode. i have flashed the recovery for xolo a800 from the threads avao;able in XDA. , however after getting into the recovery mode i dont have any options.it shows me the recovery screen with an android symbol and an exclamation mark. this is exactly where i get stuck all the time. i do have stored the superuser zip file in my phone memory, however for me to flash the same i need to have options on the recovery screen, which is what im missing..
hope i am flashing the right recovery file... the one that i did was the stock recovery for xolo a800 in the xda threads.
Incase, im going wrong, can you please attach the recovery file for me to cross check....helplessly waiting.
And thank you indeed for your prompt and well explained response.:good::good:
kaustav.arsenal said:
hey siddhartha,
i am able to get into the recovery mode. i have flashed the recovery for xolo a800 from the threads avao;able in XDA. , however after getting into the recovery mode i dont have any options.it shows me the recovery screen with an android symbol and an exclamation mark. this is exactly where i get stuck all the time. i do have stored the superuser zip file in my phone memory, however for me to flash the same i need to have options on the recovery screen, which is what im missing..
hope i am flashing the right recovery file... the one that i did was the stock recovery for xolo a800 in the xda threads.
Incase, im going wrong, can you please attach the recovery file for me to cross check....helplessly waiting.
And thank you indeed for your prompt and well explained response.:good::good:
Click to expand...
Click to collapse
Kaustav,
[http://forum.xda-developers.com/attachment.php?attachmentid=1827332&d=1364045871] go to this address this is the cwm recovery flash this and root your device
Siddhartha9964 said:
Kaustav,
[http://forum.xda-developers.com/attachment.php?attachmentid=1827332&d=1364045871] go to this address this is the cwm recovery flash this and root your device
Click to expand...
Click to collapse
Hey siddhartha..
unable to access the link that you sent me. can you please e-maail it to me.. Please ... it would be of great help
and thanks again for your prompt and immediate reply
My e-mail address is [email protected]
ooops... sorry...I was able to access the link siddhartha.
Will falsh this and get back to you asap.
Thanks again... ur a Star.
Fingers crossed till then.
Siddhartha9964 said:
Kaustav,
[http://forum.xda-developers.com/attachment.php?attachmentid=1827332&d=1364045871] go to this address this is the cwm recovery flash this and root your device
Click to expand...
Click to collapse
hey siddhartha... can you please tell me the hex values when i am flashing the recovery file....plz...:cyclops:
Siddhartha9964 said:
Kaustav,
[http://forum.xda-developers.com/attachment.php?attachmentid=1827332&d=1364045871] go to this address this is the cwm recovery flash this and root your device
Click to expand...
Click to collapse
hey siddhartha... i was able to fl;ash the recovery file that u gave me... thumbs up for that... but after flashing that my phone doesnt start...
its stuck at the boot logo of xolo and bricked... do you have th stock rom for the phone... please help me as i dont have a phone right now.... !!!!
or is there any other way of unbricking the phone... plz....
:crying::crying::crying::crying:
kaustav.arsenal said:
hey siddhartha... i was able to fl;ash the recovery file that u gave me... thumbs up for that... but after flashing that my phone doesnt start...
its stuck at the boot logo of xolo and bricked... do you have th stock rom for the phone... please help me as i dont have a phone right now.... !!!!
or is there any other way of unbricking the phone... plz....
:crying::crying::crying::crying:
Click to expand...
Click to collapse
Hey Kaustav,
This is the link for the ICS rom not Jelly Bean. http://199.91.154.149/zuw8tcd4stlg/jids8830gbn7t1q/xolo_a800_s109_20130121.zip if you want Jelly Bean go to http://www.xolo.in/xolocare/software-upgrade
Siddhartha9964 said:
Hey Kaustav,
This is the link for the ICS rom not Jelly Bean. http://199.91.154.149/zuw8tcd4stlg/jids8830gbn7t1q/xolo_a800_s109_20130121.zip if you want Jelly Bean go to http://www.xolo.in/xolocare/software-upgrade
Click to expand...
Click to collapse
hey siddhartha... the link for ICS doesnt work...it says that its an non validated account... do u have it uploaded anywhre else.. plz share it with me if u can...
Xolo A800 jellybean root
Siddhartha9964 said:
Hey Guys,
I cracked how to root xolo a800 jelly bean .
First download the cwm recovery from xda and download mt6577 scattering file. Now download sp flash tool and super user zip file from anywhere and follow the sp tool flashing process. After flashing the recovery through sp flash tool enter recovery \by holding power and vol up and flash the super user zip and you are done
:good::good::good::good:
Click to expand...
Click to collapse
Hey Siddhartha, I have got the CMW Recovery but I am ubable to find the mt6577 scattering file. Will you please give me the link or sent it in my email- [email protected]
thanks guys.... my xolo is rooted...
Sent from my XOLO_A800 using xda premium
how to root xolo a800 jelly bean
Siddhartha9964 said:
Hey Guys,
I cracked how to root xolo a800 jelly bean .
First download the cwm recovery from xda and download mt6577 scattering file. Now download sp flash tool and super user zip file from anywhere and follow the sp tool flashing process. After flashing the recovery through sp flash tool enter recovery \by holding power and vol up and flash the super user zip and you are done
:good::good::good::good:
Click to expand...
Click to collapse
Hello,
can you explain me how to root xolo a800 i am new and don't know anythink about how to root the phone but i want to root my phone.
Please also provide the links of drivers used while rooting the phone.
will this method work on xolo q600??
xolo 800
somebody please tag me a cwm for my xolo a800 . i want to root and flash a new rom .................
Hi Guys,
Before you guys shoot me down, Just wanted to say, i searched XDA for 2 hours, couldn't find the exact reply. And a few topics are open since a year with no reply, So thinking that someone will reply to me. I am opening this "Need Help" Ticket.
I have a micromax a110 with 4.04 - as i got no update ever! So what i did was
Rooted the phone properly as per the procedure.
Downloaded the CWM 6.0.4.9 recovery [selinux] and flashed it with Recovery Link :http://forum.xda-developers.com/mic...opment/recovery-cwm-6-0-4-9-recovery-t2789175
Downloaded the [ROM][4.2.2] CanvaS5™ V1.1 Link: http://forum.xda-developers.com/showthread.php?t=2775553
After flashing the rom properly, when i reboot the phone, it gets stuck on the boot screen forever. Am i doing something wrong? Should i have flashed a kernel? or something. Please note, i am not looking into going back to stock, as i have moved into the dark side of the root world .
Since i have just been a Read-only user of XDA for all this while(more than a year), with no posts ever, i cant request for help on the Developer Thread as it requires privileges. Requesting someone to please post this topic there so i can speak to the dev or please give me a answer to help me:silly:
4.2.2 won't support SELinux
kunalsaddar said:
Hi Guys,
Before you guys shoot me down, Just wanted to say, i searched XDA for 2 hours, couldn't find the exact reply. And a few topics are open since a year with no reply, So thinking that someone will reply to me. I am opening this "Need Help" Ticket.
I have a micromax a110 with 4.04 - as i got no update ever! So what i did was
Rooted the phone properly as per the procedure.
Downloaded the CWM 6.0.4.9 recovery [selinux] and flashed it with Recovery Link :http://forum.xda-developers.com/mic...opment/recovery-cwm-6-0-4-9-recovery-t2789175
Downloaded the [ROM][4.2.2] CanvaS5™ V1.1 Link: http://forum.xda-developers.com/showthread.php?t=2775553
After flashing the rom properly, when i reboot the phone, it gets stuck on the boot screen forever. Am i doing something wrong? Should i have flashed a kernel? or something. Please note, i am not looking into going back to stock, as i have moved into the dark side of the root world .
Since i have just been a Read-only user of XDA for all this while(more than a year), with no posts ever, i cant request for help on the Developer Thread as it requires privileges. Requesting someone to please post this topic there so i can speak to the dev or please give me a answer to help me:silly:
Click to expand...
Click to collapse
That Recovery you flashed is SELinux enabled and is not supported by 4.1-4.2.2 Jelly bean Roms so you have got boot loop . You can try other recovery or flash higher android version roms .
---------- Post added at 05:20 PM ---------- Previous post was at 05:06 PM ----------
I think this CWM recovery will work with your downloaded rom
http://forum.xda-developers.com/showthread.php?t=2204785
And remember before flashing anything clear data,cache and dalvik-cache.
Happy Flashing
Thanks guys for the reply, let me flash the above CMW and check. Will revert shortly
How to i put the CMW in the phones root directory now for it to flash? The phone doesnt start so cant access it through usb. Any ideas?
kunalsaddar said:
How to i put the CMW in the phones root directory now for it to flash? The phone doesnt start so cant access it through usb. Any ideas?
Click to expand...
Click to collapse
Since your phone is not booting you should use SP Flash tool on PC to flash the recovery. Here's a guide to SP Flash tool:
gizbeat.com/3774/how-to-flash-cwm-without-root-with-sp-flash-tool/
Hope it works .
4shreyas said:
Since your phone is not booting you should use SP Flash tool on PC to flash the recovery. Here's a guide to SP Flash tool:
gizbeat.com/3774/how-to-flash-cwm-without-root-with-sp-flash-tool/
Hope it works .
Click to expand...
Click to collapse
Thanks dude, for your quick response. I wont be able to confirm on this today as setting up SP Flash tool is just too hard. It talks about some scatter file. I dont know how to make that.Let me get a grip on that, will confirm then. Thanks for the help anyhow
kunalsaddar said:
Thanks dude, for your quick response. I wont be able to confirm on this today as setting up SP Flash tool is just too hard. It talks about some scatter file. I dont know how to make that.Let me get a grip on that, will confirm then. Thanks for the help anyhow
Click to expand...
Click to collapse
Great , Here the link for official Jelly bean update for your device by micromax as said in that post . I think that file has scatter file (it contains your phone's storage partition info ) . There is also guide to flash using SP Flash tool . Use it .
http://forum.xda-developers.com/showthread.php?t=2209288
Hit Thanks if it works
4shreyas said:
Great , Here the link for official Jelly bean update for your device by micromax as said in that post . I think that file has scatter file (it contains your phone's storage partition info ) . There is also guide to flash using SP Flash tool . Use it .
http://forum.xda-developers.com/showthread.php?t=2209288
Hit Thanks if it works
Click to expand...
Click to collapse
Hey shreyas,
I have tried it with SP tools, it doesnt work, man. Drivers, Softwares, updated all of them, i keep doing everything. I know i am doing something wrong, but its hard to identify, spent like the entire night trying to make it. Can't i get a flashable zip for CMW instead or know that on which rom did the CWM selinux work on? This boot looping is now killing :fingers-crossed:
Finally, i found a way, thanks 4Shreyas for all the help. Gave me knowledge and helped me identify the errors.
I couldn't flash the rom or the cmw recvoery through the pc as the drivers for SP tools never worked on my Win 8.1 x64. Finally applied the stock jellybean file from http://forum.xda-developers.com/showthread.php?t=2160609 . It updated my CMW since that was the problem i was stuck in bootloop.
After that i flash the phone with my desired rom.
In the end, all good:laugh:
kunalsaddar said:
Finally, i found a way, thanks 4Shreyas for all the help. Gave me knowledge and helped me identify the errors.
I couldn't flash the rom or the cmw recvoery through the pc as the drivers for SP tools never worked on my Win 8.1 x64. Finally applied the stock jellybean file from http://forum.xda-developers.com/showthread.php?t=2160609 . It updated my CMW since that was the problem i was stuck in bootloop.
After that i flash the phone with my desired rom.
In the end, all good:laugh:
Click to expand...
Click to collapse
Cheers bro !!!! Yes getting MTK drivers in win 8 is a challenging task and as SELinux CWM recovery is concerned you can flash 4.3.x and 4.4.x roms . Google it , if any rom is available then use that recovery to flash those roms .
Enjoy !!
4shreyas said:
Cheers bro !!!! Yes getting MTK drivers in win 8 is a challenging task and as SELinux CWM recovery is concerned you can flash 4.3.x and 4.4.x roms . Google it , if any rom is available then use that recovery to flash those roms .
Enjoy !!
Click to expand...
Click to collapse
True that, i actually gave up trying to find the drivers. There arnt any 4.3 or 4.4.x roms released for mmx. When they do, will surely apply the Selinux CWM. Thanks for all the help .:good:
Q&A for PHILZ RECOVERY for SPICE MI509
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for PHILZ RECOVERY for SPICE MI509. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Not working...
Hi "Saurabh" i tried this procedure my Spice MI509 is showing Spice logo "S" and restarting continuously please help me out.
epsan said:
Hi "Saurabh" i tried this procedure my Spice MI509 is showing Spice logo "S" and restarting continuously please help me out.
Click to expand...
Click to collapse
How u flashing this recovery...???
Use mobile uncle tool...
It needs root and then place the recovery in sdcard after renaming It to recovery.img and then open Mobil uncle tool and select install recovery from sdcard and then select the recovery file...
Wait some time and your recovery will work now...
And I want to know that on which android version u r?? Kitkat or jelly bean???
saurabh1234 said:
How u flashing this recovery...???
Use mobile uncle tool...
It needs root and then place the recovery in sdcard after renaming It to recovery.img and then open Mobil uncle tool and select install recovery from sdcard and then select the recovery file...
Wait some time and your recovery will work now...
And I want to know that on which android version u r?? Kitkat or jelly bean???
Click to expand...
Click to collapse
Hey Thanks for reply, i resolved that issue by trying to turn on the phone by usb power, phone boots up normally but without any signal both sims are properly inserted but no signal (may be IMEI issue) how to resolve it???. ( procedure i followed for previous attempt, i am currently on JellyBean my stock android version(people say Mi509 come with KITKAT out of box but its not in case of my phone. i followed your procedure as it is, downloaded attachment and MobileUncle apk installed that apk , opened that uncle and selected recovery update and it automatically restarted.)
now i know that my standard Android Recovery was OVERWRITTEN by custom recovery and i DIDNT backup my stock recovery . what should i do. ( i read something about EFS partition which contains IMEI info which was corrupted by custom recovery i believe ). and also please send me backup of recovery partition (or EFS) to me @ [email protected] i will set my own IMEI nos using Enginering Mode apk . this is my only phone please help me
epsan said:
now i know that my standard Android Recovery was OVERWRITTEN by custom recovery and i DIDNT backup my stock recovery . what should i do. ( i read something about EFS partition which contains IMEI info which was corrupted by custom recovery i believe ). and also please send me backup of recovery partition (or EFS) to me @ [email protected] i will set my own IMEI nos using Enginering Mode apk . this is my only phone please help me
Click to expand...
Click to collapse
thats why i was asking about android version....
bcoz all roms and recovery available for MI509 uses KITKAT kernel and you flashed it on Jellybean...
here i attach the stock recovery of jellybean....
for fixing IMEI use this link.........
This will fix it permanently...
IMEI TOOL with video tutorial....https://docs.google.com/uc?id=0B5DM6ZSz3dh-eTQzV2VWck1Kckk&export=download
Database- http://www.mediafire.com/download/no1oo8rroq4uqtr/Database.rar
use database file from second link bcoz this database is for spice mi509....
and next time dont flash rom if you have jellybean
Hey "Sourabh" did i "bricked" my phone???? and how to overcome that please.............
---------- Post added at 02:44 PM ---------- Previous post was at 02:03 PM ----------
Again Thanks for the reply, i just came to know that..... i should back up efs directory thank you very much for your support, i will let you know the status once i finish all the countermeasures.
epsan said:
Hey "Sourabh" did i "bricked" my phone???? and how to overcome that please.............
---------- Post added at 02:44 PM ---------- Previous post was at 02:03 PM ----------
Again Thanks for the reply, i just came to know that..... i should back up efs directory thank you very much for your support, i will let you know the status once i finish all the countermeasures.
Click to expand...
Click to collapse
If your device I bricked then just flash stock firmware using sp flash tool...if you don't know how to ...
Then give it to service centre but don't tell them about rooting and flashing custom rom...
Bcoz if you tell them then they will cost you money...
saurabh1234 said:
If your device I bricked then just flash stock firmware using sp flash tool...if you don't know how to ...
Then give it to service centre but don't tell them about rooting and flashing custom rom...
Bcoz if you tell them then they will cost you money...
Click to expand...
Click to collapse
Hey "Saurabh" you didddit. i tried using SPFTool and its working i was able to get my imei nos also(but it took me two days to figure it out). NOW how do i upgrade my mobile to KITKAT do you have that rom. can you please send me that link(stock rom).
epsan said:
Hey "Saurabh" you didddit. i tried using SPFTool and its working i was able to get my imei nos also(but it took me two days to figure it out). NOW how do i upgrade my mobile to KITKAT do you have that rom. can you please send me that link(stock rom).
Click to expand...
Click to collapse
Above was mistyping I was writing 'is' but leaved at 'i'. But thats no problem.
Below is stock kitkat firmware....flash through spflashtool...
https://docs.google.com/uc?id=0B1F4thoxIkjEb3pMT0N1UEhmQ00
When flashing firmware is done then root your mobile and install the philz recovery using flashify or mobile uncle tool to install custom rom...
saurabh1234 said:
Above was mistyping I was writing 'is' but leaved at 'i'. But thats no problem.
Below is stock kitkat firmware....flash through spflashtool...
https://docs.google.com/uc?id=0B1F4thoxIkjEb3pMT0N1UEhmQ00
When flashing firmware is done then root your mobile and install the philz recovery using flashify or mobile uncle tool to install custom rom...
Click to expand...
Click to collapse
Thank you very much "Saurabh" it really worked and i am running stock KITKAT now and will change it to custom rom very soon... again Thank you very much :good:
epsan said:
Thank you very much "Saurabh" it really worked and i am running stock KITKAT now and will change it to custom rom very soon... again Thank you very much :good:
Click to expand...
Click to collapse
i am always here to help...
and now i am uploading my new ORIGINAL LOLLIPOP ROM CM12.1 ...
and links will be available in two three days...
Could someone provide backup image of spice MI 509. My phone got stuck in a bootloader while changing font.
Is there any method to come out of the problem. Pls reply.
subash.ateet said:
Could someone provide backup image of spice MI 509. My phone got stuck in a bootloader while changing font.
Is there any method to come out of the problem. Pls reply.
Click to expand...
Click to collapse
download the stock rom from xda firmware site and then use flashtool in that zip to install the firmware in your mi509...it will boot... but u will lost your apps installed earlier...
saurabh1234 said:
download the stock rom from xda firmware site and then use flashtool in that zip to install the firmware in your mi509...it will boot... but u will lost your apps installed earlier...
Click to expand...
Click to collapse
Thanks Saurabh1234 for your reply.
How can I use flashtool in my mobile as it is stucking in bootloader? I can access only Recovery mode ( Power + Vol. down). Is there any method to install the firmware by Recovery mode(Power + Vol. down)?
I had already tried the SP flastool to flash my mobile but the software dont access/ read my mobile.
subash.ateet said:
Thanks Saurabh1234 for your reply.
How can I use flashtool in my mobile as it is stucking in bootloader? I can access only Recovery mode ( Power + Vol. down). Is there any method to install the firmware by Recovery mode(Power + Vol. down)?
I had already tried the SP flastool to flash my mobile but the software dont access/ read my mobile.
Click to expand...
Click to collapse
flashtool will work on your pc and laptop...
download firmware and then install drivers given in it in your pc then open your flashtool and load bootloader...
now connect your device to pc via data cable with or without battery ...
then click on download button in flashtool and press vol down on device.
then update will start..
check this link...
http://forum.xda-developers.com/android/general/rooting-cwm-firmware-spice-stellar-mi-t2969920
Trying to port PhilZ 6.59.0
Can you tell me how you ported PhilZ 6.57.9.......coz i'm trying to port PhilZ 6.59.0
Plz plz read it at least once
I was flashing miui 12 OTA through orange fox recovery. Now my phone is dead. It can boot into recovery, fastboot flawlessly. It is detected in miflash also but whenever I am trying to flash miui 11 any version stock rom it gives error "cannot recieve hello packet". I have flashed many roms from orange fox and all of them flashed successfully but it is booting to recovery only. Plzz help
PS : I have read many threads but remove the battery /let the battery drain out method was not much explanatory so I couldn't understand it.. Plz anyone can suggest alternative method or same method in detail.
bro download proper fastboot rom,then extract twice via 7zip
then u will be able to flash via mi tool.
https://xiaomifirmwareupdater.com/miui/violet/stable/V11.0.10.0.PFHINXM/
tell me if it works or not.
I already have done it bro... Not working at all
Subrata520 said:
bro download proper fastboot rom,then extract twice via 7zip
then u will be able to flash via mi tool.
https://xiaomifirmwareupdater.com/miui/violet/stable/V11.0.10.0.PFHINXM/
tell me if it works or not.
Click to expand...
Click to collapse
I already have done it bro.. It doesn't work at all
PratikOimbe said:
I already have done it bro.. It doesn't work at all
Click to expand...
Click to collapse
i used this method to flash fastboot rom, and it works.no error at all.
do u try to lock ur bootloader?
just select clean all tab only.
PratikOimbe said:
I already have done it bro.. It doesn't work at all
Click to expand...
Click to collapse
Whats the error?
Is it flashing successfully? Or cant flash at all
Subrata520 said:
bro download proper fastboot rom,then extract twice via 7zip
then u will be able to flash via mi tool.
https://xiaomifirmwareupdater.com/miui/violet/stable/V11.0.10.0.PFHINXM/
tell me if it works or not.
Click to expand...
Click to collapse
Subrata520 said:
i used this method to flash fastboot rom, and it works.no error at all.
do u try to lock ur bootloader?
just select clean all tab only.
Click to expand...
Click to collapse
I had selected clean all tab only.. But nothing work out
shimalxavier said:
Whats the error?
Is it flashing successfully? Or cant flash at all
Click to expand...
Click to collapse
Cannot recieve hello packet error and then flashing fails within seconds..
But I had flashed this same file few months back easily but after I bricked my phone as I mentioned in OP it is giving error
PratikOimbe said:
Cannot recieve hello packet error and then flashing fails within seconds..
But I had flashed this same file few months back easily but after I bricked my phone as I mentioned in OP it is giving error
Click to expand...
Click to collapse
I think you need to remove the battery and try..im not sure though...
Try searching for this error...its a kind of general error so you would find an answer in some other device section
First of all download miui 11 recovery zip file for violet, after that boot into pitch black recovery, then wipe all partitions you see there and must format data then reboot to pitch black recovery again now place the zip file into your phone and flash and you will be good to go
Here is the link:-
http://bigota.d.miui.com/V11.0.2.0.QFHINXM/miui_VIOLETINGlobal_V11.0.2.0.QFHINXM_73c0bc5751_10.0.zip