Cannot recieve hello packet RN7 Pro - Xiaomi Redmi Note 7 Pro Questions & Answers

Plz plz read it at least once
I was flashing miui 12 OTA through orange fox recovery. Now my phone is dead. It can boot into recovery, fastboot flawlessly. It is detected in miflash also but whenever I am trying to flash miui 11 any version stock rom it gives error "cannot recieve hello packet". I have flashed many roms from orange fox and all of them flashed successfully but it is booting to recovery only. Plzz help
PS : I have read many threads but remove the battery /let the battery drain out method was not much explanatory so I couldn't understand it.. Plz anyone can suggest alternative method or same method in detail.

bro download proper fastboot rom,then extract twice via 7zip
then u will be able to flash via mi tool.
https://xiaomifirmwareupdater.com/miui/violet/stable/V11.0.10.0.PFHINXM/
tell me if it works or not.

I already have done it bro... Not working at all

Subrata520 said:
bro download proper fastboot rom,then extract twice via 7zip
then u will be able to flash via mi tool.
https://xiaomifirmwareupdater.com/miui/violet/stable/V11.0.10.0.PFHINXM/
tell me if it works or not.
Click to expand...
Click to collapse
I already have done it bro.. It doesn't work at all

PratikOimbe said:
I already have done it bro.. It doesn't work at all
Click to expand...
Click to collapse
i used this method to flash fastboot rom, and it works.no error at all.
do u try to lock ur bootloader?
just select clean all tab only.

PratikOimbe said:
I already have done it bro.. It doesn't work at all
Click to expand...
Click to collapse
Whats the error?
Is it flashing successfully? Or cant flash at all

Subrata520 said:
bro download proper fastboot rom,then extract twice via 7zip
then u will be able to flash via mi tool.
https://xiaomifirmwareupdater.com/miui/violet/stable/V11.0.10.0.PFHINXM/
tell me if it works or not.
Click to expand...
Click to collapse
Subrata520 said:
i used this method to flash fastboot rom, and it works.no error at all.
do u try to lock ur bootloader?
just select clean all tab only.
Click to expand...
Click to collapse
I had selected clean all tab only.. But nothing work out

shimalxavier said:
Whats the error?
Is it flashing successfully? Or cant flash at all
Click to expand...
Click to collapse
Cannot recieve hello packet error and then flashing fails within seconds..
But I had flashed this same file few months back easily but after I bricked my phone as I mentioned in OP it is giving error

PratikOimbe said:
Cannot recieve hello packet error and then flashing fails within seconds..
But I had flashed this same file few months back easily but after I bricked my phone as I mentioned in OP it is giving error
Click to expand...
Click to collapse
I think you need to remove the battery and try..im not sure though...
Try searching for this error...its a kind of general error so you would find an answer in some other device section

First of all download miui 11 recovery zip file for violet, after that boot into pitch black recovery, then wipe all partitions you see there and must format data then reboot to pitch black recovery again now place the zip file into your phone and flash and you will be good to go
Here is the link:-
http://bigota.d.miui.com/V11.0.2.0.QFHINXM/miui_VIOLETINGlobal_V11.0.2.0.QFHINXM_73c0bc5751_10.0.zip

Related

***emergency please help im in deep ****

hi there, as the title says im in real deep trouble. To start off i rooted my phone which want a problem, but then i tried installing a rom which wasnt a problem either. The problem is i didn't know i had to install GAPPS so i wiped my phone and tried again. The stupid thing was that i completely wiped the whole phone i have no OS and my recovery doesn't work anymore. I cant access my phone through my computer as it tells me to format my phone. I cant even access recovery anymore my phone just goes in a cycle of rebooting. PLEASE I BEG YOU HELP ME ! X'(
wolfbear911 said:
hi there, as the title says im in real deep trouble. To start off i rooted my phone which want a problem, but then i tried installing a rom which wasnt a problem either. The problem is i didn't know i had to install GAPPS so i wiped my phone and tried again. The stupid thing was that i completely wiped the whole phone i have no OS and my recovery doesn't work anymore. I cant access my phone through my computer as it tells me to format my phone. I cant even access recovery anymore my phone just goes in a cycle of rebooting. PLEASE I BEG YOU HELP ME ! X'(
Click to expand...
Click to collapse
Can you go into Bootloader/Fastboot? (Volume Down + Power)
EDIT: Read your other thread. You need to flash a stock recovery. You can do that via fastboot. Flash a stock recovery, format SD card, then flash a custom recovery again and you should be good to go.
Process of flashing any recovery is easy. Refer to the method in my signature, you just need to follow the RECOVERY FLASHING PART ONLY.
Other necessary info is also available.
khan.orak said:
Can you go into Bootloader/Fastboot? (Volume Down + Power)
Click to expand...
Click to collapse
Yes do you know how i can fix my phone ?
wolfbear911 said:
Yes do you know how i can fix my phone ?
Click to expand...
Click to collapse
Yeah, read the previous EDITED post. Follow steps 17, 18 of the tutorial. Read the Pre-Requisites and Common Steps also and flash the recovery.
Thanks man, ill give you a thanks
khan.orak said:
Yeah, read the previous EDITED post. Follow steps 17, 18 of the tutorial. Read the Pre-Requisites and Common Steps also and flash the recovery.
Click to expand...
Click to collapse
dude it says : error cannot load recovery.img (sorry if i come out as a noob its my first time doing this)
wolfbear911 said:
dude it says : error cannot load recovery.img (sorry if i come out as a noob its my first time doing this)
Click to expand...
Click to collapse
No problem.
Fastboot drivers ok?
where did you get from and then put recovery.img?
also check name of the whateverRecovery.img file to be the same as "recovery.img"
khan.orak said:
No problem.
Fastboot drivers ok?
where did you get from and then put recovery.img?
also check name of the whateverRecovery.img file to be the same as "recovery.img"
Click to expand...
Click to collapse
i did that now a list of commands has just popped up on my cmd ?
Can you upload a screenshot ? Will be helpful.
Sent from my HTC One S using Tapatalk 4 Beta
khan.orak said:
Can you upload a screenshot ? Will be helpful.
Sent from my HTC One S using Tapatalk 4 Beta
Click to expand...
Click to collapse
i think i uploaded one now
wolfbear911 said:
i think i uploaded one now
Click to expand...
Click to collapse
I have to say, I can't see anything in that Pic. :/
Try to upload a zoomed one.
try this
wolfbear911 said:
try this
Click to expand...
Click to collapse
You missed the correct command, flash part. Try this:
Code:
fastboot flash recovery recovery.img
khan.orak said:
You missed the correct command, flash part. Try this:
Code:
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
IT WORKED YES ! what do i do now
wolfbear911 said:
IT WORKED YES ! what do i do now
Click to expand...
Click to collapse
Great. Now you have a stock recovery. Just format the SD Card from recovery and the SD should be good.
Afterwards, you can flash any custom recovery and mess around with flashing ROMs etc.
khan.orak said:
Great. Now you have a stock recovery. Just format the SD Card from recovery and the SD should be good.
Afterwards, you can flash any custom recovery and mess around with flashing ROMs etc.
Click to expand...
Click to collapse
that my phone doesnt launch recovery, it stays on the htc loading screen :/
wolfbear911 said:
that my phone doesnt launch recovery, it stays on the htc loading screen :/
Click to expand...
Click to collapse
Where did you get the recovery from?
Also, which version One S do you have? S3 or S4?
khan.orak said:
Where did you get the recovery from?
Also, which version One S do you have? S3 or S4?
Click to expand...
Click to collapse
well i used the twrp 2.3.3.0 from your guide
I used s3 to root my phone so i guess its s3
wolfbear911 said:
well i used the twrp 2.3.3.0 from your guide
I used s3 to root my phone so i guess its s3
Click to expand...
Click to collapse
Download This. Open the zip file with 7-Zip or WinRAR, go to firmware.zip, extract recovery.img.
Then flash the recovery in the same way. This is the stock recovery and not TWRP.
I am assuming your phone to be S3 and updated to Jellybean already.
khan.orak said:
Download This. Open the zip file with 7-Zip or WinRAR, go to firmware.zip, extract recovery.img.
Then flash the recovery in the same way. This is the stock recovery and not TWRP.
I am assuming your phone to be S3 and updated to Jellybean already.
Click to expand...
Click to collapse
i remember somthing about running 4.2.2 if that helps and i will start downloading now and i shall post results when im done

need quick help within 10 mins cos i got the laptop for 2 hrs only

got stucked at bootloader unlocked warning screen...tried to flash stock firmwire via flashfire app..all goes well and then stuck at reboot..pls help
Flash the firmware via cmd
Laloo' Hdez said:
Flash the firmware via cmd
Click to expand...
Click to collapse
downloading that 900mb file...can u tell me the steps?
reeeju said:
downloading that 900mb file...can u tell me the steps?
Click to expand...
Click to collapse
Google is ur best friend
Sent from my MotoG3 using Tapatalk
banerjeeayan1996 said:
Google is ur best friend
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
its done bro..flashed stock firmware succesfully butwhen tried to flash twrp it didnt flashed
reeeju said:
its done bro..flashed stock firmware succesfully butwhen tried to flash twrp it didnt flashed
Click to expand...
Click to collapse
Flash again
Sent from my MotoG3 using Tapatalk
reeeju said:
its done bro..flashed stock firmware succesfully butwhen tried to flash twrp it didnt flashed
Click to expand...
Click to collapse
Here's the guide to flash the files: http://forum.xda-developers.com/2015-moto-g/general/guide-fastboot-flashing-factory-t3187750
It never hurts to have on hand.
And to flash the twrp, you need the .img, and also flash via cmd. http://forum.xda-developers.com/2015-moto-g/orig-development/twrp-twrp-moto-g-2015-t3170537
Always look for is the best way to learn, and thanks to the authors of those posts for the help provide us.
Sorry for my bad english.
Laloo' Hdez said:
Here's the guide to flash the files: http://forum.xda-developers.com/2015-moto-g/general/guide-fastboot-flashing-factory-t3187750
It never hurts to have on hand.
And to flash the twrp, you need the .img, and also flash via cmd. http://forum.xda-developers.com/2015-moto-g/orig-development/twrp-twrp-moto-g-2015-t3170537
Always look for is the best way to learn, and thanks to the authors of those posts for the help provide us.
Sorry for my bad english.
Click to expand...
Click to collapse
Fastboot flash recovery twrp.img..doesnt work for me...
banerjeeayan1996 said:
Flash again
Click to expand...
Click to collapse
No result..same....after flashing when i got to recovery mode by up and down vol key and it goes to red exclamation mark with android sign
reeeju said:
No result..same....after flashing when i got to recovery mode by up and down vol key and it goes to red exclamation mark with android sign
Click to expand...
Click to collapse
Duh, dude xd in the screen you describe, press vol down until you see the word "recovery", press power, and the Motorola logo appears, next, the recovery.
Laloo' Hdez said:
Duh, dude xd in the screen you describe, press vol down until you see the word "recovery", press power, and the Motorola logo appears, next, the recovery.
Click to expand...
Click to collapse
Press vol down twice and get recovery mode then press power button....screen goes black and came with android logo in red xclamation mark
reeeju said:
Press vol down twice and get recovery mode then press power button....screen goes black and came with android logo in red xclamation mark
Click to expand...
Click to collapse
I don't remember very well, but in that screen, press vol up for 15 seconds, and the recovery should've appear, if this doesn't works, send me a PM and I'll help you better.
Laloo' Hdez said:
I don't remember very well, but in that screen, press vol up for 15 seconds, and the recovery should've appear, if this doesn't works, send me a PM and I'll help you better.
Click to expand...
Click to collapse
Stock recovery does appear but then what to do?
maybe you are doomed jk
https://www.youtube.com/watch?v=Y8Z2uZs4nd0 try this tutorial
valkaizer2594 said:
maybe you are doomed jk
try this tutorial
Click to expand...
Click to collapse
@valkaizer2594...i also followed these steps except that oem lock code....and then all goes fine phn booted succesfully...but then when i try to flash the twrp image in fastboot it shows okay in computer screen but then when i try to go twrp recovery it goes to stock recovery instead....
Hope u undetstand my prob
reeeju said:
@valkaizer2594...i also followed these steps except that oem lock code....and then all goes fine phn booted succesfully...but then when i try to flash the twrp image in fastboot it shows okay in computer screen but then when i try to go twrp recovery it goes to stock recovery instead....
Hope u undetstand my prob
Click to expand...
Click to collapse
yes i faced this as my friend said in the video u have to delete firmware files and then copy twrp in the adb folder. doing this helped me or usually iextract adb in separate folder and just copy twrp there and then flash . also are you using the latest twrp? coz dont. use latest version of twrp check the thread properly and read the build number before downloading..
valkaizer2594 said:
yes i faced this as my friend said in the video u have to delete firmware files and then copy twrp in the adb folder. doing this helped me or usually iextract adb in separate folder and just copy twrp there and then flash . also are you using the latest twrp? coz dont. use latest version of twrp check the thread properly and read the build number before downloading..
Click to expand...
Click to collapse
I placed that twrp image file in that folder but didnt dlt anything cos i follwed the guide written in "General" section....twrp 3.0.1 r1 or which build i hav to flash...
Shud deletion of firmware files is compulsory??
reeeju said:
I placed that twrp image file in that folder but didnt dlt anything cos i follwed the guide written in "General" section....twrp 3.0.1 r1 or which build i hav to flash...
Shud deletion of firmware files is compulsory??
Click to expand...
Click to collapse
did u try downloading twrp again? maybe the zip got damaged
valkaizer2594 said:
did u try downloading twrp again? maybe the zip got damaged
Click to expand...
Click to collapse
Downloaded 2 times via pc....and placed it it that exact folder where it shud hav been pasted and run the code...fastboot flash recovery twrp.img....(i changed the file name to twrp.img).....what shud i do to get back my twrp and got root??...
Pls tell i dont need volte i need custom roms...vry frustating life with stock rom now.. Fcuk there r no clear all button...i hav to slide each and other by single slide...its painful....
reeeju said:
Downloaded 2 times via pc....and placed it it that exact folder where it shud hav been pasted and run the code...fastboot flash recovery twrp.img....(i changed the file name to twrp.img).....what shud i do to get back my twrp and got root??...
Pls tell i dont need volte i need custom roms...vry frustating life with stock rom now.. Fcuk there r no clear all button...i hav to slide each and other by single slide...its painful....
Click to expand...
Click to collapse
What recovery are you trying to install?

archos 50b neon custom Recovery and rom

Hello XDA,
I would ask is there a way to get an custom recovery or custom rom or stock for the Archos 50b neon
Codename: ac50bne
Ram: 1GB
Internal storage: 8GB
Cpu: 4 core processor
Android 4.4.2
not to be confused with the Archos 50 neon that codename is ac50ne
Regards lucki1000
And thanks for all answers
lucki1000 said:
Hello XDA,
I would ask is there a way to get an custom recovery or custom rom or stock for the Archos 50b neon
Codename: ac50bne
Ram: 1GB
Internal storage: 8GB
Cpu: 4 core processor
Android 4.4.2
not to be confused with the Archos 50 neon that codename is ac50ne
Regards lucki1000
And thanks for all answers
Click to expand...
Click to collapse
Hi... Did you get far with this? I also need the recovery AND the latest firmware, I wont even mind the 4.4.2 firmware anyway as I cant get into Settings at all... it crashes immediately
xdadeem said:
Hi... Did you get far with this? I also need the recovery AND the latest firmware, I wont even mind the 4.4.2 firmware anyway as I cant get into Settings at all... it crashes immediately
Click to expand...
Click to collapse
Yes i have found a Firmware and and a way to flash it i load it up for you, and give you the flash instructions.
lucki1000 said:
Yes i have found a Firmware and and a way to flash it i load it up for you, and give you the flash instructions.
Click to expand...
Click to collapse
Oh great... thanks. Cant wait. I cant even find the proper recovery file to use or root method... so much hassle
xdadeem said:
Oh great... thanks. Cant wait. I cant even find the proper recovery file to use or root method... so much hassle
Click to expand...
Click to collapse
https://forum.xda-developers.com/android/general/unofficial-twrps-devices-source-code-t3833338/page9
@Augustoandro have made a twrp for ac50bne, by me it works and have flashed supersu and a rom that i've ported.
If the Stock Rom for ac50bne Uploaded i've notify you.
I've upload the stock rom in my gdrive https://drive.google.com/open?id=18aNCC_E3kHpyq5pK3islNmFRskvlx2b-
you must uncompress it and download Sp flash tool https://spflashtool.com/download/ then you load the scatter file in sp flash tool it is in my uncompressed 7zip and anything else make it itself by question can you always ask me.
lucki1000 said:
https://forum.xda-developers.com/android/general/unofficial-twrps-devices-source-code-t3833338/page9
@Augustoandro have made a twrp for ac50bne, by me it works and have flashed supersu and a rom that i've ported.
If the Stock Rom for ac50bne Uploaded i've notify you.
I've upload the stock rom in my gdrive https://drive.google.com/open?id=18aNCC_E3kHpyq5pK3islNmFRskvlx2b-
you must uncompress it and download Sp flash tool https://spflashtool.com/download/ then you load the scatter file in sp flash tool it is in my uncompressed 7zip and anything else make it itself by question can you always ask me.
Click to expand...
Click to collapse
Thank you for this, I have flashed it now and it seem all fine... I used the TWRP you mentioned and indeed once you say reboot system it just goes off and until I remove battery before it comes on again.
I also removed my IMEI so I need to restore that too... but tool I found were windows tool while I use linux.
xdadeem said:
Thank you for this, I have flashed it now and it seem all fine... I used the TWRP you mentioned and indeed once you say reboot system it just goes off and until I remove battery before it comes on again.
I also removed my IMEI so I need to restore that too... but tool I found were windows tool while I use linux.
Click to expand...
Click to collapse
You can make dual boot on your Computer, and then you can use the tool.
lucki1000 said:
You can make dual boot on your Computer, and then you can use the tool.
Click to expand...
Click to collapse
Sorry... now I got a windows computer but the rom is modded so it wont allow anything work... no engineering mode works... the code doesnt and not even mobileuncle tools work
lucki1000 said:
You can make dual boot on your Computer, and then you can use the tool.
Click to expand...
Click to collapse
Ok I bricked it now
xdadeem said:
Ok I bricked it now
Click to expand...
Click to collapse
Flash it wirh sp flash tool this can unbrick.
lucki1000 said:
Flash it wirh sp flash tool this can unbrick.
Click to expand...
Click to collapse
Its just not working... I have beendoing this all day... using Sp flash tool... I am now fed up.
My initial issue is that I chose option for 'Format all+Download' and it flashed well but I lost my IMEI... this should not be a problem I can re-write it using engineering mode Mobileuncle tools and other tools but they do not work on this rom... I think its because this is a moded rom so its not working, not even the engineering mode codes, I tried with fastboot, adb from computer... yes I can see my device but nothing else works.
Ok, let me just flash it all over with sp tool...all I get is the red bar, I dont get the Yellow one at all and even when i wait 5 minutes... nothing. I will keep trying then
xdadeem said:
Its just not working... I have beendoing this all day... using Sp flash tool... I am now fed up.
My initial issue is that I chose option for 'Format all+Download' and it flashed well but I lost my IMEI... this should not be a problem I can re-write it using engineering mode Mobileuncle tools and other tools but they do not work on this rom... I think its because this is a moded rom so its not working, not even the engineering mode codes, I tried with fastboot, adb from computer... yes I can see my device but nothing else works.
Ok, let me just flash it all over with sp tool...all I get is the red bar, I dont get the Yellow one at all and even when i wait 5 minutes... nothing. I will keep trying then
Click to expand...
Click to collapse
this is as i know not a modded rom.
Can you reflash the rom and try it with this app https://play.google.com/store/apps/details?id=com.themonsterit.EngineerStarter&hl=en if this not going type it here or make a new Thread and ask how to recover your imei.
lucki1000 said:
this is as i know not a modded rom.
Can you reflash the rom and try it with this app https://play.google.com/store/apps/details?id=com.themonsterit.EngineerStarter&hl=en if this not going type it here or make a new Thread and ask how to recover your imei.
Click to expand...
Click to collapse
This is my situation... cant even flash with sp flashtool anymore
xdadeem said:
This is my situation... cant even flash with sp flashtool anymore
Click to expand...
Click to collapse
Have you try another cable?
lucki1000 said:
Have you try another cable?
Click to expand...
Click to collapse
Oh... that was my best cable... do they suddenly stop working for flash because its working fine as a charger still
xdadeem said:
Oh... that was my best cable... do they suddenly stop working for flash because its working fine as a charger still
Click to expand...
Click to collapse
So you try another cable?
lucki1000 said:
So you try another cable?
Click to expand...
Click to collapse
Yes I have and its same thing... I dont have much knowledge in these,just a little but could this have anything to do with bootloader etc I dont know
xdadeem said:
Yes I have and its same thing... I dont have much knowledge in these,just a little but could this have anything to do with bootloader etc I dont know
Click to expand...
Click to collapse
You can try to Format only the whole Phone like bootloader and then Format and Download again.
lucki1000 said:
You can try to Format only the whole Phone like bootloader and then Format and Download again.
Click to expand...
Click to collapse
What does this message mean? after 35 minutes
xdadeem said:
What does this message mean? after 35 minutes
Click to expand...
Click to collapse
Did you can try it with windows? Or try only Download and manually format it with the tab format.
or you use from another source but it should be the same https://docs.google.com/uc?id=0By4_z1Byo7UKYUh1Y1FQY3NrUjQ&export=download.
It is maybe a distro problem can you tell me which distro you are using?
I have it tested 10 minutes ago by me it works fine.

Anyone tried to flash stock fastboot ROM via Official Mi Flashtool?

I got an error while flashing official fastboot ROM on my note 7 pro "error: FAILED (remote: Error: Last flash failed: Volume Full)", after this my device system got destroyed. how can I flash fastboot rom on Redmi note 7 pro?
debadri1995 said:
I got an error while flashing official fastboot ROM on my note 7 pro "error: FAILED (remote: Error: Last flash failed: Volume Full)", after this my device system got destroyed. how can I flash fastboot rom on Redmi note 7 pro?
Click to expand...
Click to collapse
This most likely happened due to an incompatible flash or incomplete one.
Now try the clear all option and format your phone completely before flashing MIUI again.
Also what OS were you running when this happened?
Naveenthemi said:
This most likely happened due to an incompatible flash or incomplete one.
Now try the clear all option and format your phone completely before flashing MIUI again.
Also what OS were you running when this happened?
Click to expand...
Click to collapse
Before flashing i was using v10.3.7.0 (which was flashed by service center engineers using EDL mode.) And the Flashtool version was 2018.5.28.0.
Naveenthemi said:
This most likely happened due to an incompatible flash or incomplete one.
Now try the clear all option and format your phone completely before flashing MIUI again.
Also what OS were you running when this happened?
Click to expand...
Click to collapse
oh, I forgot to tell you, I got the error while the system partition was flashing.. so definitely it was a incomplete flash.
debadri1995 said:
oh, I forgot to tell you, I got the error while the system partition was flashing.. so definitely it was a incomplete flash.
Click to expand...
Click to collapse
1. Now download the flashboot ROM u want
2.Now select the flash all including storage option
3. Try flashing it now
It should be successful as this will wipe out the existing OS and install a new one
Also u will lose your data so I hope u had a backup..
If anyone on 10.3.9 & facing bugs & want to downgrade then unlock bootloader & then download minimal adb toolkit extract it & copy the extracted fastboot rom files into minimal adb folder & then put your phone into fastboot mode & then run clear all & install.bat inside the extracted folder & wait for it to finish & you will be able to downgrade because you wont be able to downgrade with mi flash, its a tested process by me as i bricked my bootloader unlocked phone which was only going to fastboot mode, i recovered by this process.
Naveenthemi said:
1. Now download the flashboot ROM u want
2.Now select the flash all including storage option
3. Try flashing it now
It should be successful as this will wipe out the existing OS and install a new one
Also u will lose your data so I hope u had a backup..
Click to expand...
Click to collapse
yes, i did the same as you said.. i know this fastboot flashing process but i got that error while flashing..
navi_58861170 said:
If anyone on 10.3.9 & facing bugs & want to downgrade then unlock bootloader & then download minimal adb toolkit extract it & copy the extracted fastboot rom files into minimal adb folder & then put your phone into fastboot mode & then run clear all & install.bat inside the extracted folder & wait for it to finish & you will be able to downgrade because you wont be able to downgrade with mi flash, its a tested process by me as i bricked my bootloader unlocked phone which was only going to fastboot mode, i recovered by this process.
Click to expand...
Click to collapse
this is useful.. thanks
You can also check that YouTube video how to flash voilet.
https://youtu.be/kjzZZjj41aM
debadri1995 said:
yes, i did the same as you said.. i know this fastboot flashing process but i got that error while flashing..
Click to expand...
Click to collapse
Oh, do u have the TWRP by Petercxy to installed and accessible? If u do u can flash the ROM through that.
(The official TWRP for this device can't)
Naveenthemi said:
Oh, do u have the TWRP by Petercxy to installed and accessible? If u do u can flash the ROM through that.
(The official TWRP for this device can't)
Click to expand...
Click to collapse
naah, don't have that..
debadri1995 said:
naah, don't have that..
Click to expand...
Click to collapse
Flash that
Naveenthemi said:
Flash that
Click to expand...
Click to collapse
don't wanna mesh with my phone..
debadri1995 said:
don't wanna mesh with my phone..
Click to expand...
Click to collapse
U already did ?*
Naveenthemi said:
U already did ?*
Click to expand...
Click to collapse
? I don't wanna mess with my phone again* I flashed the stock firmware using Mi FlashPro
debadri1995 said:
? I don't wanna mess with my phone again* I flashed the stock firmware using Mi FlashPro
Click to expand...
Click to collapse
Oh ok u never mentioned that...good work tho...
Naveenthemi said:
Oh ok u never mentioned that...good work tho...
Click to expand...
Click to collapse
yeah I didn't, but I was queries if its a Flashtool bug or My note 7 pro's bug..
debadri1995 said:
yeah I didn't, but I was queries if its a Flashtool bug or My note 7 pro's bug..
Click to expand...
Click to collapse
It's probably something to do with your phone...
my bootloader is lockd how to flash rom file with mi flash
gsunil said:
my bootloader is lockd how to flash rom file with mi flash
Click to expand...
Click to collapse
First unlock the bootloader, you won't be able to flash till the bootloader is unlocked...

Verified boot enable in Smart phone flash tool

As my phone is bricked during custom rom i used smart phone flash tool to flash the file . When flashing going on a dialog box appears on saying that verified boot is enabled. So please help me to recover from this.
I want (opporeserve2-verified.img) to continue. Or suggest me any other methods
Disable verified boot ( AVB ) by means of Fastboot or AVBCTL utiilty. Requires phone's bootloader is got unlocked before.
I have the exact problem.
My RMX2117 is bricked.
CAN"T ACCESS FASTBOOT AND ADB
Only BROM and SP flashing available.
So, I'm trying to install stock firmware but getting the same error.
Please help recover the device.
any one know how to get rid of this problem? i have the same problem please help guys ASAP
Bump same issue with 2 a21's
anyone finds any solution for this
San74 said:
ITS easy Go to SP flash tool > Option > General uncheck LIB DA MATCH You are good to go
Click to expand...
Click to collapse
Hey I tried that didn't have any success the same error still came up
Jaashin said:
I have the exact problem.
My RMX2117 is bricked.
CAN"T ACCESS FASTBOOT AND ADB
Only BROM and SP flashing available.
So, I'm trying to install stock firmware but getting the same error.
Please help recover the device.
Click to expand...
Click to collapse
if your going to flash stock rom of the phone do the following to avoid the error :
1) load the scatter file
2) untick the preloader
3) then click download and connect your phone wait until the process is done
4) disconnect your phone
5) untick everything except preloader
6) then click download and connect your phone wait until the process is done
7) check your phone if your phones boot up
if the problem is still there cannot flash because of the error pls follow this tutorial --->
Anonymous V said:
if your going to flash stock rom of the phone do the following to avoid the error :
1) load the scatter file
2) untick the preloader
3) then click download and connect your phone wait until the process is done
4) disconnect your phone
5) untick everything except preloader
6) then click download and connect your phone wait until the process is done
7) check your phone if your phones boot up
if the problem is still there cannot flash because of the error pls follow this tutorial --->
Click to expand...
Click to collapse
DanielHusney said:
Hey I tried that didn't have any success the same error still came up
Click to expand...
Click to collapse
ZUESHACKED said:
anyone finds any solution for this
Click to expand...
Click to collapse
XDABLACKSHIP said:
any one know how to get rid of this problem? i have the same problem please help guys ASAP
Click to expand...
Click to collapse
Dbanks789 said:
Bump same issue with 2 a21's
Click to expand...
Click to collapse
just unlock your bootloader before flashing with sp flash, you can use third party tools like this cannot attach link here it will be removed, go on google and search for mtk client tool.
just power off your mobile, click driver install button
, then click unlock bootloader then connect your phone...
after unlocking bootloader error will disappear.
tony 54325 said:
just unlock your bootloader before flashing with sp flash, you can use third party tools like this cannot attach link here it will be removed, go on google and search for mtk client tool.
just power off your mobile, click driver install buttonView attachment 5794937View attachment 5794939, then click unlock bootloader then connect your phone...
after unlocking bootloader error will disappear.
Click to expand...
Click to collapse
tony 54325 said:
just unlock your bootloader before flashing with sp flash, you can use third party tools like this cannot attach link here it will be removed, go on google and search for mtk client tool.
just power off your mobile, click driver install buttonView attachment 5794937View attachment 5794939, then click unlock bootloader then connect your phone...
after unlocking bootloader error will disappear.
Click to expand...
Click to collapse
you dont need to unlock the bootloader if your just going to flash a partition or the whole rom if the error still occur then you can use mtk client(terminal version and gui version) the tool will let you flash a partition and the whole rom without error
here follow this tutorial if you dont know how to do it --------------> https://www.hovatek.com/forum/thread-40866.html
Anonymous V said:
you dont need to unlock the bootloader if your just going to flash a partition or the whole rom if the error still occur then you can use mtk client(terminal version and gui version) the tool will let you flash a partition and the whole rom without error
here follow this tutorial if you dont know how to do it --------------> https://www.hovatek.com/forum/thread-40866.html
Click to expand...
Click to collapse
I personally find it easier to unlock bootloader
Also I never found GUI version of mtk client tool that can flash partitions , ..
And cmd ones not user friendly.
tony 54325 said:
I personally find it easier to unlock bootloader
Also I never found GUI version of mtk client tool that can flash partitions , ..
And cmd ones not user friendly.
Click to expand...
Click to collapse
yes there is gui version and cmd version is good too( for me )
here the gui version ---->https://github.com/bkerler/mtkclient/tree/Gui_v1
Anonymous V said:
yes there is gui version and cmd version is good too( for me )
here the gui version ---->https://github.com/bkerler/mtkclient/tree/Gui_v1
Click to expand...
Click to collapse
Thanks buddy, will definitely try it,❤
tony 54325 said:
Thanks buddy, will definitely try it,❤
Click to expand...
Click to collapse
Yeah you should
Guys
I have unlocked the bootloader using MTK client tool
But
Can I flash a stock rom using sp flash tool without getting " please find *-verified.img" or disable secure boot " error ?
+ also , can I flash a patched boot.img by Magick with the whole rom
And why I don't flash the preloaded with the other files ?????
Zezo 089 said:
Guys
I have unlocked the bootloader using MTK client tool
But
Can I flash a stock rom using sp flash tool without getting " please find *-verified.img" or disable secure boot " error ?
+ also , can I flash a patched boot.img by Magick with the whole rom
And why I don't flash the preloaded with the other files ?????
Click to expand...
Click to collapse
first of all yes you can flash the whole rom without getting the error that you mentioned if you will do a clean flash ( i assume that you know what is clean flash ) base on my experience flashing the whole rom while the old rom is still in the phone will result to the error that you mentioned but this depend in the device though but mostly there is always an error if you do that, second yes probably you can flash the patched_boot.img along with the whole rom but i never tried that before but to be sure you need to flash the patched_boot.img if your going to root your phone if you dont want to get some error, third if you do a clean flash then you flash the whole rom along with it you defenitly get the error that you mentioned for some reason i think when you flash the preloader along with other files it will create a conflict resulting to that error thats why if ever you want to flash a rom always flash the preloader first or flash it last after you flash the whole partition.
1- the error was in md1.img file
2- brooooo , my phone is in security patch a.46 and I downloaded the a.42 version so what I mean is my phone is updated to the latest but I want to downgrade it
Soo , I'll flash the opporeserve2 file but without the preloader file ( but flash it with unticking the other files)
Zezo 089 said:
1- the error was in md1.img file
2- brooooo , my phone is in security patch a.46 and I downloaded the a.42 version so what I mean is my phone is updated to the latest but I want to downgrade it
Click to expand...
Click to collapse
hmmm downgrading the phone? do you have a fastboot? if so just flash the whole downgraded rom and everything will be fine
Zezo 089 said:
Soo , I'll flash the opporeserve2 file but without the preloader file ( but flash it with unticking the other files)
Click to expand...
Click to collapse
yeas you can try that

Categories

Resources