I got an error while flashing official fastboot ROM on my note 7 pro "error: FAILED (remote: Error: Last flash failed: Volume Full)", after this my device system got destroyed. how can I flash fastboot rom on Redmi note 7 pro?
debadri1995 said:
I got an error while flashing official fastboot ROM on my note 7 pro "error: FAILED (remote: Error: Last flash failed: Volume Full)", after this my device system got destroyed. how can I flash fastboot rom on Redmi note 7 pro?
Click to expand...
Click to collapse
This most likely happened due to an incompatible flash or incomplete one.
Now try the clear all option and format your phone completely before flashing MIUI again.
Also what OS were you running when this happened?
Naveenthemi said:
This most likely happened due to an incompatible flash or incomplete one.
Now try the clear all option and format your phone completely before flashing MIUI again.
Also what OS were you running when this happened?
Click to expand...
Click to collapse
Before flashing i was using v10.3.7.0 (which was flashed by service center engineers using EDL mode.) And the Flashtool version was 2018.5.28.0.
Naveenthemi said:
This most likely happened due to an incompatible flash or incomplete one.
Now try the clear all option and format your phone completely before flashing MIUI again.
Also what OS were you running when this happened?
Click to expand...
Click to collapse
oh, I forgot to tell you, I got the error while the system partition was flashing.. so definitely it was a incomplete flash.
debadri1995 said:
oh, I forgot to tell you, I got the error while the system partition was flashing.. so definitely it was a incomplete flash.
Click to expand...
Click to collapse
1. Now download the flashboot ROM u want
2.Now select the flash all including storage option
3. Try flashing it now
It should be successful as this will wipe out the existing OS and install a new one
Also u will lose your data so I hope u had a backup..
If anyone on 10.3.9 & facing bugs & want to downgrade then unlock bootloader & then download minimal adb toolkit extract it & copy the extracted fastboot rom files into minimal adb folder & then put your phone into fastboot mode & then run clear all & install.bat inside the extracted folder & wait for it to finish & you will be able to downgrade because you wont be able to downgrade with mi flash, its a tested process by me as i bricked my bootloader unlocked phone which was only going to fastboot mode, i recovered by this process.
Naveenthemi said:
1. Now download the flashboot ROM u want
2.Now select the flash all including storage option
3. Try flashing it now
It should be successful as this will wipe out the existing OS and install a new one
Also u will lose your data so I hope u had a backup..
Click to expand...
Click to collapse
yes, i did the same as you said.. i know this fastboot flashing process but i got that error while flashing..
navi_58861170 said:
If anyone on 10.3.9 & facing bugs & want to downgrade then unlock bootloader & then download minimal adb toolkit extract it & copy the extracted fastboot rom files into minimal adb folder & then put your phone into fastboot mode & then run clear all & install.bat inside the extracted folder & wait for it to finish & you will be able to downgrade because you wont be able to downgrade with mi flash, its a tested process by me as i bricked my bootloader unlocked phone which was only going to fastboot mode, i recovered by this process.
Click to expand...
Click to collapse
this is useful.. thanks
You can also check that YouTube video how to flash voilet.
https://youtu.be/kjzZZjj41aM
debadri1995 said:
yes, i did the same as you said.. i know this fastboot flashing process but i got that error while flashing..
Click to expand...
Click to collapse
Oh, do u have the TWRP by Petercxy to installed and accessible? If u do u can flash the ROM through that.
(The official TWRP for this device can't)
Naveenthemi said:
Oh, do u have the TWRP by Petercxy to installed and accessible? If u do u can flash the ROM through that.
(The official TWRP for this device can't)
Click to expand...
Click to collapse
naah, don't have that..
debadri1995 said:
naah, don't have that..
Click to expand...
Click to collapse
Flash that
Naveenthemi said:
Flash that
Click to expand...
Click to collapse
don't wanna mesh with my phone..
debadri1995 said:
don't wanna mesh with my phone..
Click to expand...
Click to collapse
U already did ?*
Naveenthemi said:
U already did ?*
Click to expand...
Click to collapse
? I don't wanna mess with my phone again* I flashed the stock firmware using Mi FlashPro
debadri1995 said:
? I don't wanna mess with my phone again* I flashed the stock firmware using Mi FlashPro
Click to expand...
Click to collapse
Oh ok u never mentioned that...good work tho...
Naveenthemi said:
Oh ok u never mentioned that...good work tho...
Click to expand...
Click to collapse
yeah I didn't, but I was queries if its a Flashtool bug or My note 7 pro's bug..
debadri1995 said:
yeah I didn't, but I was queries if its a Flashtool bug or My note 7 pro's bug..
Click to expand...
Click to collapse
It's probably something to do with your phone...
my bootloader is lockd how to flash rom file with mi flash
gsunil said:
my bootloader is lockd how to flash rom file with mi flash
Click to expand...
Click to collapse
First unlock the bootloader, you won't be able to flash till the bootloader is unlocked...
Related
Anyone who can confirm or tried this TWRP for Redmi 10x Pro 5G?
https://www.cyanogenmods.org/downloads/redmi-10x-pro-twrp-recovery/
Yes, I confirm -- it works.
I've install Magisk with it, that's totally ok. Can't confirm yet if its backup/restore functions work or not.
And now I can confirm the backup and restore work. I successfully restored the super and data partitions. And also have flashed stock boot instead of patched.
So, for now it seems the TWRP is nice.
WARNING:NEVER USE THIS RECOVERY WHEN YOUR PHONE IS IN THE LATEST DEVELOPER VERSION SYSTEM.IT WILL CAUSE A LOT OF UNFIXABLE PROBLEMS.
pys078 said:
WARNING:NEVER USE THIS RECOVERY WHEN YOUR PHONE IS IN THE LATEST DEVELOPER VERSION SYSTEM.IT WILL CAUSE A LOT OF UNFIXABLE PROBLEMS.
Click to expand...
Click to collapse
Also,you should not upgrade your system when you have flashed this recovery
Funny thing is that i have done what i said and now my phone is in repairing by changing the motherboard(within one year i dont need to pay for it)
pys078 said:
Also,you should not upgrade your system when you have flashed this recovery
Click to expand...
Click to collapse
TWRP 3.4.1B-0606 is outdated and unavailable for firmware V12.0.5.0 and higher.
Please, keep on V12.0.4.0 or lower.
VD171 said:
TWRP 3.4.1B-0606 is outdated and unavailable for firmware V12.0.5.0 and higher.
Please, keep on V12.0.4.0 or lower.
Click to expand...
Click to collapse
i did not know that and my phone now is repairing QAQ
pys078 said:
i did not know that and my phone now is repairing QAQ
Click to expand...
Click to collapse
You just have to format or erase misc partition, if you've flashed misc.bin.
Or just flash stock rom recovery.img again, my friend.
And everything will works again.
So easy.
Good luck
VD171 said:
TWRP 3.4.1B-0606 is outdated and unavailable for firmware V12.0.5.0 and higher.
Please, keep on V12.0.4.0 or lower.
Click to expand...
Click to collapse
Anyway i should say thank you for telling me that.
VD171 said:
You just have to format or erase misc partition, if you've flashed misc.bin.
Click to expand...
Click to collapse
VD171 said:
You just have to format or erase misc partition, if you've flashed misc.bin.
Or just flash stock rom recovery.img again, my friend.
And everything will works again.
So easy.
Good luck
Click to expand...
Click to collapse
I dont know what was wrong.But my phone could not get in the fastboot mode.
VD171 said:
You just have to format or erase misc partition, if you've flashed misc.bin.
Or just flash stock rom recovery.img again, my friend.
And everything will works again.
So easy.
Good luck
Click to expand...
Click to collapse
And the SP flash tool has not support this phone's chip yet.I feel sad about it.
pys078 said:
I dont know what was wrong.But my phone could not get in the fastboot mode.
Click to expand...
Click to collapse
Because misc.bin. If you've flashed it to misc partition, it will boot on recovery forever.
You have to erase or format it.
That's simple. I will create a guide for it.
VD171 said:
Because misc.bin. If you've flashed it to misc partition, it will boot on recovery forever.
You have to erase or format it.
That's simple. I will create a guide for it.
Click to expand...
Click to collapse
Thank you for helping me !!!!
VD171 said:
Because misc.bin. If you've flashed it to misc partition, it will boot on recovery forever.
You have to erase or format it.
That's simple. I will create a guide for it.
Click to expand...
Click to collapse
i am not an expert in this field.
Usually when i face a problem like this,i use fastboot to settle it.If that dosen't work ,i will use SP flash tool then.
Maybe i should learn more skills about it.
pys078 said:
i am not an expert in this field.
Usually when i face a problem like this,i use fastboot to settle it.If that dosen't work ,i will use SP flash tool then.
Maybe i should learn more skills about it.
Click to expand...
Click to collapse
Done. Try this: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4209295/
VD171 said:
Done. Try this: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4209295/
Click to expand...
Click to collapse
maybe i was too young.i only know that i can use adb when i am in the miui.i didn't know that when the phone is not in the miui i can use adb.
pys078 said:
maybe i was too young.i only know that i can use adb when i am in the miui.i didn't know that when the phone is not in the miui i can use adb.
Click to expand...
Click to collapse
Adb is default and needed for every android device.
VD171 said:
Done. Try this: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4209295/
Click to expand...
Click to collapse
my phone now is back in xiaomi's factory to change the motherboard.sorry for being unable to try your guide article.
VD171 said:
Adb is default and needed for every android device.
Click to expand...
Click to collapse
i don't get it.when i am in miui i have to enable the adb debugging in developer options before i use adb to debug my phone
Plz plz read it at least once
I was flashing miui 12 OTA through orange fox recovery. Now my phone is dead. It can boot into recovery, fastboot flawlessly. It is detected in miflash also but whenever I am trying to flash miui 11 any version stock rom it gives error "cannot recieve hello packet". I have flashed many roms from orange fox and all of them flashed successfully but it is booting to recovery only. Plzz help
PS : I have read many threads but remove the battery /let the battery drain out method was not much explanatory so I couldn't understand it.. Plz anyone can suggest alternative method or same method in detail.
bro download proper fastboot rom,then extract twice via 7zip
then u will be able to flash via mi tool.
https://xiaomifirmwareupdater.com/miui/violet/stable/V11.0.10.0.PFHINXM/
tell me if it works or not.
I already have done it bro... Not working at all
Subrata520 said:
bro download proper fastboot rom,then extract twice via 7zip
then u will be able to flash via mi tool.
https://xiaomifirmwareupdater.com/miui/violet/stable/V11.0.10.0.PFHINXM/
tell me if it works or not.
Click to expand...
Click to collapse
I already have done it bro.. It doesn't work at all
PratikOimbe said:
I already have done it bro.. It doesn't work at all
Click to expand...
Click to collapse
i used this method to flash fastboot rom, and it works.no error at all.
do u try to lock ur bootloader?
just select clean all tab only.
PratikOimbe said:
I already have done it bro.. It doesn't work at all
Click to expand...
Click to collapse
Whats the error?
Is it flashing successfully? Or cant flash at all
Subrata520 said:
bro download proper fastboot rom,then extract twice via 7zip
then u will be able to flash via mi tool.
https://xiaomifirmwareupdater.com/miui/violet/stable/V11.0.10.0.PFHINXM/
tell me if it works or not.
Click to expand...
Click to collapse
Subrata520 said:
i used this method to flash fastboot rom, and it works.no error at all.
do u try to lock ur bootloader?
just select clean all tab only.
Click to expand...
Click to collapse
I had selected clean all tab only.. But nothing work out
shimalxavier said:
Whats the error?
Is it flashing successfully? Or cant flash at all
Click to expand...
Click to collapse
Cannot recieve hello packet error and then flashing fails within seconds..
But I had flashed this same file few months back easily but after I bricked my phone as I mentioned in OP it is giving error
PratikOimbe said:
Cannot recieve hello packet error and then flashing fails within seconds..
But I had flashed this same file few months back easily but after I bricked my phone as I mentioned in OP it is giving error
Click to expand...
Click to collapse
I think you need to remove the battery and try..im not sure though...
Try searching for this error...its a kind of general error so you would find an answer in some other device section
First of all download miui 11 recovery zip file for violet, after that boot into pitch black recovery, then wipe all partitions you see there and must format data then reboot to pitch black recovery again now place the zip file into your phone and flash and you will be good to go
Here is the link:-
http://bigota.d.miui.com/V11.0.2.0.QFHINXM/miui_VIOLETINGlobal_V11.0.2.0.QFHINXM_73c0bc5751_10.0.zip
Hey guys
I have poco f2 pro 6gb\128gb
I unlocked bootloader and erased everything , when I reboot to system it with locked with mi account , I ignored this and returned again to fastboot and flashed TWRP , rebooted to TWRP and flash Xiaomi eu ROM , it flashed without any error
Then I rebooted to system and the problem started from there , bootloop!! Incredible bootloop that I hadn't seen before
I tried to wipe data , flash all kinds of ROM "eu , stock , AOSP ROMs" , all finished with success and no errors but the problem stayed exist
I tried to flash with miflash and xiaomitoolv2 , it also finish with success but the problem!! Didn't fixed
I tried to flash with edl mode "without test points" with mi flash , but it shows me "you must turn off Find My Device first" !! How f***in can I turn it off with this dead phone !!
I went to a maintenance center and told him trying test points method , but he failed
I tried to reset EFS but it tells me "no such file or dictionary"
What should I do now , I have been in this problem 2 months ago .
I promise that I will give a gift or money for anyone helps me
Thx
Did you wipe or format data? There is a difference and you should always format.
grt67DFqyu said:
Did you wipe or format data? There is a difference and you should always format.
Click to expand...
Click to collapse
First , I didn't
But after the problem I tried 274894 times !
Tried to format with all TWRP versions
simosa3ed said:
Hey guys
I have poco f2 pro 6gb\128gb
I unlocked bootloader and erased everything , when I reboot to system it with locked with mi account , I ignored this and returned again to fastboot and flashed TWRP , rebooted to TWRP and flash Xiaomi eu ROM , it flashed without any error
Then I rebooted to system and the problem started from there , bootloop!! Incredible bootloop that I hadn't seen before
I tried to wipe data , flash all kinds of ROM "eu , stock , AOSP ROMs" , all finished with success and no errors but the problem stayed exist
I tried to flash with miflash and xiaomitoolv2 , it also finish with success but the problem!! Didn't fixed
I tried to flash with edl mode "without test points" with mi flash , but it shows me "you must turn off Find My Device first" !! How f***in can I turn it off with this dead phone !!
I went to a maintenance center and told him trying test points method , but he failed
I tried to reset EFS but it tells me "no such file or dictionary"
What should I do now , I have been in this problem 2 months ago .
I promise that I will give a gift or money for anyone helps me
Thx
Click to expand...
Click to collapse
using mi flash tool, flash this
http://hugeota.d.miui.com/0.06.16.n...ive.user_20200617.0000.00_11.0_b147ec6db8.tgz
and also down right select flash and not flash_lock so u dont need to unlock bootloader again, from there install any ROM of your choice
edit: i think download link doesnt work ill have to upload the bone stock rom somewhere and share it
Sent from my POCO F2 Pro using Tapatalk
simosa3ed said:
Hey guys
I have poco f2 pro 6gb\128gb
I unlocked bootloader and erased everything , when I reboot to system it with locked with mi account , I ignored this and returned again to fastboot and flashed TWRP , rebooted to TWRP and flash Xiaomi eu ROM , it flashed without any error
Then I rebooted to system and the problem started from there , bootloop!! Incredible bootloop that I hadn't seen before
I tried to wipe data , flash all kinds of ROM "eu , stock , AOSP ROMs" , all finished with success and no errors but the problem stayed exist
I tried to flash with miflash and xiaomitoolv2 , it also finish with success but the problem!! Didn't fixed
I tried to flash with edl mode "without test points" with mi flash , but it shows me "you must turn off Find My Device first" !! How f***in can I turn it off with this dead phone !!
I went to a maintenance center and told him trying test points method , but he failed
I tried to reset EFS but it tells me "no such file or dictionary"
What should I do now , I have been in this problem 2 months ago .
I promise that I will give a gift or money for anyone helps me
Thx
Click to expand...
Click to collapse
https://www.mediafire.com/download/yo6om5fk8m3e85y
flash that with miflash
Sent from my POCO F2 Pro using Tapatalk
Knfio said:
https://www.mediafire.com/download/yo6om5fk8m3e85y
flash that with miflash
Sent from my POCO F2 Pro using Tapatalk
Click to expand...
Click to collapse
Is the ENG ROM "engineering"?
If yes , then I tried it
And select flash and lock , or flash only ?
simosa3ed said:
Is the ENG ROM "engineering"?
If yes , then I tried it
And select flash and lock , or flash only ?
Click to expand...
Click to collapse
its a android 11 beta rom from google
Dadovvv said:
its a android 11 beta rom from google
Click to expand...
Click to collapse
Yes I tried it and it stucks on "android" logo for 5 to 10 seconds then restart
simosa3ed said:
Yes I tried it and it stucks on "android" logo for 5 to 10 seconds then restart
Click to expand...
Click to collapse
can u boot into mi recovery? volume up and power button
Dadovvv said:
can u boot into mi recovery? volume up and power button
Click to expand...
Click to collapse
Yes I can boot into TWRP and mi recovery
I also can boot into ROM security and fastboot
simosa3ed said:
Yes I can boot into TWRP and mi recovery
I also can boot into ROM security and fastboot
Click to expand...
Click to collapse
Try this:
*First download from this page global version rom V11.0.2.0.QJKMIXM https://mirom.ezbox.idv.tw/en/phone/lmi/roms-global-stable/
download both recovery and fastboot rom
*Flash over miflash fastboot rom with clean_all options (dont lock)
*From this page download PCSuite China version with eng translation
https://miui.blog/any-devices/china-mi-pc-suite-english-translation/
Install PCSuite u have tutorial on that page how to install.
*Finally try to flash again V11.0.2.0.QJKMIXM but this time flash over PCSuite recovery rom u downloaded in first stage. U need to boot into mirecovery to flash using pcsuite. U can google how to flash with pcsuite
simosa3ed said:
Is the ENG ROM "engineering"?
If yes , then I tried it
And select flash and lock , or flash only ?
Click to expand...
Click to collapse
flash only and its not ENG rom
Sent from my POCO F2 Pro using Tapatalk
Dadovvv said:
Try this:
*First download from this page global version rom V11.0.2.0.QJKMIXM https://mirom.ezbox.idv.tw/en/phone/lmi/roms-global-stable/
download both recovery and fastboot rom
*Flash over miflash fastboot rom with clean_all options (dont lock)
*From this page download PCSuite China version with eng translation
https://miui.blog/any-devices/china-mi-pc-suite-english-translation/
Install PCSuite u have tutorial on that page how to install.
*Finally try to flash again V11.0.2.0.QJKMIXM but this time flash over PCSuite recovery rom u downloaded in first stage. U need to boot into mirecovery to flash using pcsuite. U can google how to flash with pcsuite
Click to expand...
Click to collapse
I tried this way but with v12.0.3
Knfio said:
flash only and its not ENG rom
Sent from my POCO F2 Pro using Tapatalk
Click to expand...
Click to collapse
I tried it.
simosa3ed said:
I tried this way but with v12.0.3
Click to expand...
Click to collapse
try with miui 11
Is you data partition f2fs or ext4? I had similar issue, stuck in bootloop with clean stock rom (after flashing with MiFlashTool) when data partition was ext4. So I changed the data partition through Chinese TWRP from ext4 to f2fs and flashed again with MiFlashTool (clean without lock bootloader) to solve the issue.
Yo I hope I can help u. Firstly wtf going to a maintenance center for a soft brick ??? Man that doesn't worth it. Also I think ur twrp is the main problem. I experienced same issues cuz most of the twrp here are somewhat buggy.
Try the latest from LR Team 3.4.2 here, it's THE ONLY ONE that should be always recommended for now :laugh:
https://mifirm.net/downloadtwrp/148
Knfio said:
flash only and its not ENG rom
Sent from my POCO F2 Pro using Tapatalk
Click to expand...
Click to collapse
Dadovvv said:
try with miui 11
Click to expand...
Click to collapse
Same problem.
fenrir_ac said:
Is you data partition f2fs or ext4? I had similar issue, stuck in bootloop with clean stock rom (after flashing with MiFlashTool) when data partition was ext4. So I changed the data partition through Chinese TWRP from ext4 to f2fs and flashed again with MiFlashTool (clean without lock bootloader) to solve the issue.
Click to expand...
Click to collapse
Yes it was ext4 and I flashed chinese TWRP , changed partition to f2fs successfully , but the same problem .
kkosnuss said:
Yo I hope I can help u. Firstly wtf going to a maintenance center for a soft brick ??? Man that doesn't worth it. Also I think ur twrp is the main problem. I experienced same issues cuz most of the twrp here are somewhat buggy.
Try the latest from LR Team 3.4.2 here, it's THE ONLY ONE that should be always recommended for now :laugh:
https://mifirm.net/downloadtwrp/148
Click to expand...
Click to collapse
Bro , 2 months !
2 months trying to run my phone and I can't !!
I think it's not a soft brick ,, it turned into hard brick magically !!
I tried all recovery , and this one which I flashed with first time
I tried all kinds of ROMs , all kinds of ways !
As my phone is bricked during custom rom i used smart phone flash tool to flash the file . When flashing going on a dialog box appears on saying that verified boot is enabled. So please help me to recover from this.
I want (opporeserve2-verified.img) to continue. Or suggest me any other methods
Disable verified boot ( AVB ) by means of Fastboot or AVBCTL utiilty. Requires phone's bootloader is got unlocked before.
I have the exact problem.
My RMX2117 is bricked.
CAN"T ACCESS FASTBOOT AND ADB
Only BROM and SP flashing available.
So, I'm trying to install stock firmware but getting the same error.
Please help recover the device.
any one know how to get rid of this problem? i have the same problem please help guys ASAP
Bump same issue with 2 a21's
anyone finds any solution for this
San74 said:
ITS easy Go to SP flash tool > Option > General uncheck LIB DA MATCH You are good to go
Click to expand...
Click to collapse
Hey I tried that didn't have any success the same error still came up
Jaashin said:
I have the exact problem.
My RMX2117 is bricked.
CAN"T ACCESS FASTBOOT AND ADB
Only BROM and SP flashing available.
So, I'm trying to install stock firmware but getting the same error.
Please help recover the device.
Click to expand...
Click to collapse
if your going to flash stock rom of the phone do the following to avoid the error :
1) load the scatter file
2) untick the preloader
3) then click download and connect your phone wait until the process is done
4) disconnect your phone
5) untick everything except preloader
6) then click download and connect your phone wait until the process is done
7) check your phone if your phones boot up
if the problem is still there cannot flash because of the error pls follow this tutorial --->
Anonymous V said:
if your going to flash stock rom of the phone do the following to avoid the error :
1) load the scatter file
2) untick the preloader
3) then click download and connect your phone wait until the process is done
4) disconnect your phone
5) untick everything except preloader
6) then click download and connect your phone wait until the process is done
7) check your phone if your phones boot up
if the problem is still there cannot flash because of the error pls follow this tutorial --->
Click to expand...
Click to collapse
DanielHusney said:
Hey I tried that didn't have any success the same error still came up
Click to expand...
Click to collapse
ZUESHACKED said:
anyone finds any solution for this
Click to expand...
Click to collapse
XDABLACKSHIP said:
any one know how to get rid of this problem? i have the same problem please help guys ASAP
Click to expand...
Click to collapse
Dbanks789 said:
Bump same issue with 2 a21's
Click to expand...
Click to collapse
just unlock your bootloader before flashing with sp flash, you can use third party tools like this cannot attach link here it will be removed, go on google and search for mtk client tool.
just power off your mobile, click driver install button
, then click unlock bootloader then connect your phone...
after unlocking bootloader error will disappear.
tony 54325 said:
just unlock your bootloader before flashing with sp flash, you can use third party tools like this cannot attach link here it will be removed, go on google and search for mtk client tool.
just power off your mobile, click driver install buttonView attachment 5794937View attachment 5794939, then click unlock bootloader then connect your phone...
after unlocking bootloader error will disappear.
Click to expand...
Click to collapse
tony 54325 said:
just unlock your bootloader before flashing with sp flash, you can use third party tools like this cannot attach link here it will be removed, go on google and search for mtk client tool.
just power off your mobile, click driver install buttonView attachment 5794937View attachment 5794939, then click unlock bootloader then connect your phone...
after unlocking bootloader error will disappear.
Click to expand...
Click to collapse
you dont need to unlock the bootloader if your just going to flash a partition or the whole rom if the error still occur then you can use mtk client(terminal version and gui version) the tool will let you flash a partition and the whole rom without error
here follow this tutorial if you dont know how to do it --------------> https://www.hovatek.com/forum/thread-40866.html
Anonymous V said:
you dont need to unlock the bootloader if your just going to flash a partition or the whole rom if the error still occur then you can use mtk client(terminal version and gui version) the tool will let you flash a partition and the whole rom without error
here follow this tutorial if you dont know how to do it --------------> https://www.hovatek.com/forum/thread-40866.html
Click to expand...
Click to collapse
I personally find it easier to unlock bootloader
Also I never found GUI version of mtk client tool that can flash partitions , ..
And cmd ones not user friendly.
tony 54325 said:
I personally find it easier to unlock bootloader
Also I never found GUI version of mtk client tool that can flash partitions , ..
And cmd ones not user friendly.
Click to expand...
Click to collapse
yes there is gui version and cmd version is good too( for me )
here the gui version ---->https://github.com/bkerler/mtkclient/tree/Gui_v1
Anonymous V said:
yes there is gui version and cmd version is good too( for me )
here the gui version ---->https://github.com/bkerler/mtkclient/tree/Gui_v1
Click to expand...
Click to collapse
Thanks buddy, will definitely try it,❤
tony 54325 said:
Thanks buddy, will definitely try it,❤
Click to expand...
Click to collapse
Yeah you should
Guys
I have unlocked the bootloader using MTK client tool
But
Can I flash a stock rom using sp flash tool without getting " please find *-verified.img" or disable secure boot " error ?
+ also , can I flash a patched boot.img by Magick with the whole rom
And why I don't flash the preloaded with the other files ?????
Zezo 089 said:
Guys
I have unlocked the bootloader using MTK client tool
But
Can I flash a stock rom using sp flash tool without getting " please find *-verified.img" or disable secure boot " error ?
+ also , can I flash a patched boot.img by Magick with the whole rom
And why I don't flash the preloaded with the other files ?????
Click to expand...
Click to collapse
first of all yes you can flash the whole rom without getting the error that you mentioned if you will do a clean flash ( i assume that you know what is clean flash ) base on my experience flashing the whole rom while the old rom is still in the phone will result to the error that you mentioned but this depend in the device though but mostly there is always an error if you do that, second yes probably you can flash the patched_boot.img along with the whole rom but i never tried that before but to be sure you need to flash the patched_boot.img if your going to root your phone if you dont want to get some error, third if you do a clean flash then you flash the whole rom along with it you defenitly get the error that you mentioned for some reason i think when you flash the preloader along with other files it will create a conflict resulting to that error thats why if ever you want to flash a rom always flash the preloader first or flash it last after you flash the whole partition.
1- the error was in md1.img file
2- brooooo , my phone is in security patch a.46 and I downloaded the a.42 version so what I mean is my phone is updated to the latest but I want to downgrade it
Soo , I'll flash the opporeserve2 file but without the preloader file ( but flash it with unticking the other files)
Zezo 089 said:
1- the error was in md1.img file
2- brooooo , my phone is in security patch a.46 and I downloaded the a.42 version so what I mean is my phone is updated to the latest but I want to downgrade it
Click to expand...
Click to collapse
hmmm downgrading the phone? do you have a fastboot? if so just flash the whole downgraded rom and everything will be fine
Zezo 089 said:
Soo , I'll flash the opporeserve2 file but without the preloader file ( but flash it with unticking the other files)
Click to expand...
Click to collapse
yeas you can try that
Hey. I installed a custom rom and now I want to go back to miui. I flashed with miflash without lock and now the phone shows the poco logo then turns off and on again. What do I do? Flashing a custom rom works but I don't want a custom rom. I'm scared to clean all and lock in case it gets hardbricked.
Do not block it. First of all you need to install in correct form with miflash from a PC the MIUI rom. You're bootloop can be for a bad installation install again and send photos of the process you're phone is not hard bricked but, don't block it.
allianzcred said:
Do not block it. First of all you need to install in correct form with miflash from a PC the MIUI rom. You're bootloop can be for a bad installation install again and send photos of the process you're phone is not hard bricked but, don't block it.
Click to expand...
Click to collapse
I tried to flash from miflash multiple times but it doesn't work. However, when I flash the recovery rom from twrp it boots fine.
On CMD the phone is recognized as an adb devices?
allianzcred said:
On CMD the phone is recognized as an adb devices?
Click to expand...
Click to collapse
Yes, but flashing using fastboot still doesn't work. I flashed xiaomi.eu for now since it's late.
strongbench said:
Yes, but flashing using fastboot still doesn't work. I flashed xiaomi.eu for now since it's late.
Click to expand...
Click to collapse
Send screen shots to see what is wrong.
allianzcred said:
Send screen shots to see what is wrong.
Click to expand...
Click to collapse
What screenshots do you need? The flashing succeeds but the device gets stuck in the poco logo. When I tried to format data in twrp to see what's the issue I got: failed to mount /vendor and failed to mount /odm.
strongbench said:
What screenshots do you need? The flashing succeeds but the device gets stuck in the poco logo. When I tried to format data in twrp to see what's the issue I got: failed to mount /vendor and failed to mount /odm.
Click to expand...
Click to collapse
I had the same problem 2 weeks ago. The solution was redownload the rom again and reinstall the adb drivers does you're PC has and AMD processor?
allianzcred said:
I had the same problem 2 weeks ago. The solution was redownload the rom again and reinstall the adb drivers does you're PC has and AMD processor?
Click to expand...
Click to collapse
Yes it has an amd processor
strongbench said:
Yes it has an amd processor
Click to expand...
Click to collapse
You need to install the drivers in secure mode let my try to find a tutorial
allianzcred said:
You need to install the drivers in secure mode let my try to find a tutorial
Click to expand...
Click to collapse
Found anything?
Go to configuration/ Start options/ Advanced start options and you need to select the option 7 like in this image
Then reinstall abd and all the drivers that you need.
allianzcred said:
Go to configuration/ Start options/ Advanced start options and you need to select the option 7 like in this image
Click to expand...
Click to collapse
Thank you. I'll try tomorrow since I don't have time to setup my phone again today. I'll probably stay unlocked but I want miui recovery to get ota updates.
After that you need to redownload the MIUI version extract from the .zip the folder and install the rom if that doesn't work tell me. I got an AMD Ryzen 5 3600, at the beginning I have the same problem. But installing in that way the drivers healp. Good look. Be in touch.
strongbench said:
Thank you. I'll try tomorrow since I don't have time to setup my phone again today. I'll probably stay unlocked but I want miui recovery to get ota updates.
Click to expand...
Click to collapse
Stay unlocked men
try it on intel (if you can)... i got the same issue but in a intel pc it works great
allianzcred said:
After that you need to redownload the MIUI version extract from the .zip the folder and install the rom if that doesn't work tell me. I got an AMD Ryzen 5 3600, at the beginning I have the same problem. But installing in that way the drivers healp. Good look. Be in touch.
Click to expand...
Click to collapse
I've decided to keep xiaomi.eu since it feels smoother than stock miui. However, I'll keep what you said in mind for future flashes.