As my phone is bricked during custom rom i used smart phone flash tool to flash the file . When flashing going on a dialog box appears on saying that verified boot is enabled. So please help me to recover from this.
I want (opporeserve2-verified.img) to continue. Or suggest me any other methods
Disable verified boot ( AVB ) by means of Fastboot or AVBCTL utiilty. Requires phone's bootloader is got unlocked before.
I have the exact problem.
My RMX2117 is bricked.
CAN"T ACCESS FASTBOOT AND ADB
Only BROM and SP flashing available.
So, I'm trying to install stock firmware but getting the same error.
Please help recover the device.
any one know how to get rid of this problem? i have the same problem please help guys ASAP
Bump same issue with 2 a21's
anyone finds any solution for this
San74 said:
ITS easy Go to SP flash tool > Option > General uncheck LIB DA MATCH You are good to go
Click to expand...
Click to collapse
Hey I tried that didn't have any success the same error still came up
Jaashin said:
I have the exact problem.
My RMX2117 is bricked.
CAN"T ACCESS FASTBOOT AND ADB
Only BROM and SP flashing available.
So, I'm trying to install stock firmware but getting the same error.
Please help recover the device.
Click to expand...
Click to collapse
if your going to flash stock rom of the phone do the following to avoid the error :
1) load the scatter file
2) untick the preloader
3) then click download and connect your phone wait until the process is done
4) disconnect your phone
5) untick everything except preloader
6) then click download and connect your phone wait until the process is done
7) check your phone if your phones boot up
if the problem is still there cannot flash because of the error pls follow this tutorial --->
Anonymous V said:
if your going to flash stock rom of the phone do the following to avoid the error :
1) load the scatter file
2) untick the preloader
3) then click download and connect your phone wait until the process is done
4) disconnect your phone
5) untick everything except preloader
6) then click download and connect your phone wait until the process is done
7) check your phone if your phones boot up
if the problem is still there cannot flash because of the error pls follow this tutorial --->
Click to expand...
Click to collapse
DanielHusney said:
Hey I tried that didn't have any success the same error still came up
Click to expand...
Click to collapse
ZUESHACKED said:
anyone finds any solution for this
Click to expand...
Click to collapse
XDABLACKSHIP said:
any one know how to get rid of this problem? i have the same problem please help guys ASAP
Click to expand...
Click to collapse
Dbanks789 said:
Bump same issue with 2 a21's
Click to expand...
Click to collapse
just unlock your bootloader before flashing with sp flash, you can use third party tools like this cannot attach link here it will be removed, go on google and search for mtk client tool.
just power off your mobile, click driver install button
, then click unlock bootloader then connect your phone...
after unlocking bootloader error will disappear.
tony 54325 said:
just unlock your bootloader before flashing with sp flash, you can use third party tools like this cannot attach link here it will be removed, go on google and search for mtk client tool.
just power off your mobile, click driver install buttonView attachment 5794937View attachment 5794939, then click unlock bootloader then connect your phone...
after unlocking bootloader error will disappear.
Click to expand...
Click to collapse
tony 54325 said:
just unlock your bootloader before flashing with sp flash, you can use third party tools like this cannot attach link here it will be removed, go on google and search for mtk client tool.
just power off your mobile, click driver install buttonView attachment 5794937View attachment 5794939, then click unlock bootloader then connect your phone...
after unlocking bootloader error will disappear.
Click to expand...
Click to collapse
you dont need to unlock the bootloader if your just going to flash a partition or the whole rom if the error still occur then you can use mtk client(terminal version and gui version) the tool will let you flash a partition and the whole rom without error
here follow this tutorial if you dont know how to do it --------------> https://www.hovatek.com/forum/thread-40866.html
Anonymous V said:
you dont need to unlock the bootloader if your just going to flash a partition or the whole rom if the error still occur then you can use mtk client(terminal version and gui version) the tool will let you flash a partition and the whole rom without error
here follow this tutorial if you dont know how to do it --------------> https://www.hovatek.com/forum/thread-40866.html
Click to expand...
Click to collapse
I personally find it easier to unlock bootloader
Also I never found GUI version of mtk client tool that can flash partitions , ..
And cmd ones not user friendly.
tony 54325 said:
I personally find it easier to unlock bootloader
Also I never found GUI version of mtk client tool that can flash partitions , ..
And cmd ones not user friendly.
Click to expand...
Click to collapse
yes there is gui version and cmd version is good too( for me )
here the gui version ---->https://github.com/bkerler/mtkclient/tree/Gui_v1
Anonymous V said:
yes there is gui version and cmd version is good too( for me )
here the gui version ---->https://github.com/bkerler/mtkclient/tree/Gui_v1
Click to expand...
Click to collapse
Thanks buddy, will definitely try it,❤
tony 54325 said:
Thanks buddy, will definitely try it,❤
Click to expand...
Click to collapse
Yeah you should
Guys
I have unlocked the bootloader using MTK client tool
But
Can I flash a stock rom using sp flash tool without getting " please find *-verified.img" or disable secure boot " error ?
+ also , can I flash a patched boot.img by Magick with the whole rom
And why I don't flash the preloaded with the other files ?????
Zezo 089 said:
Guys
I have unlocked the bootloader using MTK client tool
But
Can I flash a stock rom using sp flash tool without getting " please find *-verified.img" or disable secure boot " error ?
+ also , can I flash a patched boot.img by Magick with the whole rom
And why I don't flash the preloaded with the other files ?????
Click to expand...
Click to collapse
first of all yes you can flash the whole rom without getting the error that you mentioned if you will do a clean flash ( i assume that you know what is clean flash ) base on my experience flashing the whole rom while the old rom is still in the phone will result to the error that you mentioned but this depend in the device though but mostly there is always an error if you do that, second yes probably you can flash the patched_boot.img along with the whole rom but i never tried that before but to be sure you need to flash the patched_boot.img if your going to root your phone if you dont want to get some error, third if you do a clean flash then you flash the whole rom along with it you defenitly get the error that you mentioned for some reason i think when you flash the preloader along with other files it will create a conflict resulting to that error thats why if ever you want to flash a rom always flash the preloader first or flash it last after you flash the whole partition.
1- the error was in md1.img file
2- brooooo , my phone is in security patch a.46 and I downloaded the a.42 version so what I mean is my phone is updated to the latest but I want to downgrade it
Soo , I'll flash the opporeserve2 file but without the preloader file ( but flash it with unticking the other files)
Zezo 089 said:
1- the error was in md1.img file
2- brooooo , my phone is in security patch a.46 and I downloaded the a.42 version so what I mean is my phone is updated to the latest but I want to downgrade it
Click to expand...
Click to collapse
hmmm downgrading the phone? do you have a fastboot? if so just flash the whole downgraded rom and everything will be fine
Zezo 089 said:
Soo , I'll flash the opporeserve2 file but without the preloader file ( but flash it with unticking the other files)
Click to expand...
Click to collapse
yeas you can try that
Related
Hello XDA,
I would ask is there a way to get an custom recovery or custom rom or stock for the Archos 50b neon
Codename: ac50bne
Ram: 1GB
Internal storage: 8GB
Cpu: 4 core processor
Android 4.4.2
not to be confused with the Archos 50 neon that codename is ac50ne
Regards lucki1000
And thanks for all answers
lucki1000 said:
Hello XDA,
I would ask is there a way to get an custom recovery or custom rom or stock for the Archos 50b neon
Codename: ac50bne
Ram: 1GB
Internal storage: 8GB
Cpu: 4 core processor
Android 4.4.2
not to be confused with the Archos 50 neon that codename is ac50ne
Regards lucki1000
And thanks for all answers
Click to expand...
Click to collapse
Hi... Did you get far with this? I also need the recovery AND the latest firmware, I wont even mind the 4.4.2 firmware anyway as I cant get into Settings at all... it crashes immediately
xdadeem said:
Hi... Did you get far with this? I also need the recovery AND the latest firmware, I wont even mind the 4.4.2 firmware anyway as I cant get into Settings at all... it crashes immediately
Click to expand...
Click to collapse
Yes i have found a Firmware and and a way to flash it i load it up for you, and give you the flash instructions.
lucki1000 said:
Yes i have found a Firmware and and a way to flash it i load it up for you, and give you the flash instructions.
Click to expand...
Click to collapse
Oh great... thanks. Cant wait. I cant even find the proper recovery file to use or root method... so much hassle
xdadeem said:
Oh great... thanks. Cant wait. I cant even find the proper recovery file to use or root method... so much hassle
Click to expand...
Click to collapse
https://forum.xda-developers.com/android/general/unofficial-twrps-devices-source-code-t3833338/page9
@Augustoandro have made a twrp for ac50bne, by me it works and have flashed supersu and a rom that i've ported.
If the Stock Rom for ac50bne Uploaded i've notify you.
I've upload the stock rom in my gdrive https://drive.google.com/open?id=18aNCC_E3kHpyq5pK3islNmFRskvlx2b-
you must uncompress it and download Sp flash tool https://spflashtool.com/download/ then you load the scatter file in sp flash tool it is in my uncompressed 7zip and anything else make it itself by question can you always ask me.
lucki1000 said:
https://forum.xda-developers.com/android/general/unofficial-twrps-devices-source-code-t3833338/page9
@Augustoandro have made a twrp for ac50bne, by me it works and have flashed supersu and a rom that i've ported.
If the Stock Rom for ac50bne Uploaded i've notify you.
I've upload the stock rom in my gdrive https://drive.google.com/open?id=18aNCC_E3kHpyq5pK3islNmFRskvlx2b-
you must uncompress it and download Sp flash tool https://spflashtool.com/download/ then you load the scatter file in sp flash tool it is in my uncompressed 7zip and anything else make it itself by question can you always ask me.
Click to expand...
Click to collapse
Thank you for this, I have flashed it now and it seem all fine... I used the TWRP you mentioned and indeed once you say reboot system it just goes off and until I remove battery before it comes on again.
I also removed my IMEI so I need to restore that too... but tool I found were windows tool while I use linux.
xdadeem said:
Thank you for this, I have flashed it now and it seem all fine... I used the TWRP you mentioned and indeed once you say reboot system it just goes off and until I remove battery before it comes on again.
I also removed my IMEI so I need to restore that too... but tool I found were windows tool while I use linux.
Click to expand...
Click to collapse
You can make dual boot on your Computer, and then you can use the tool.
lucki1000 said:
You can make dual boot on your Computer, and then you can use the tool.
Click to expand...
Click to collapse
Sorry... now I got a windows computer but the rom is modded so it wont allow anything work... no engineering mode works... the code doesnt and not even mobileuncle tools work
lucki1000 said:
You can make dual boot on your Computer, and then you can use the tool.
Click to expand...
Click to collapse
Ok I bricked it now
xdadeem said:
Ok I bricked it now
Click to expand...
Click to collapse
Flash it wirh sp flash tool this can unbrick.
lucki1000 said:
Flash it wirh sp flash tool this can unbrick.
Click to expand...
Click to collapse
Its just not working... I have beendoing this all day... using Sp flash tool... I am now fed up.
My initial issue is that I chose option for 'Format all+Download' and it flashed well but I lost my IMEI... this should not be a problem I can re-write it using engineering mode Mobileuncle tools and other tools but they do not work on this rom... I think its because this is a moded rom so its not working, not even the engineering mode codes, I tried with fastboot, adb from computer... yes I can see my device but nothing else works.
Ok, let me just flash it all over with sp tool...all I get is the red bar, I dont get the Yellow one at all and even when i wait 5 minutes... nothing. I will keep trying then
xdadeem said:
Its just not working... I have beendoing this all day... using Sp flash tool... I am now fed up.
My initial issue is that I chose option for 'Format all+Download' and it flashed well but I lost my IMEI... this should not be a problem I can re-write it using engineering mode Mobileuncle tools and other tools but they do not work on this rom... I think its because this is a moded rom so its not working, not even the engineering mode codes, I tried with fastboot, adb from computer... yes I can see my device but nothing else works.
Ok, let me just flash it all over with sp tool...all I get is the red bar, I dont get the Yellow one at all and even when i wait 5 minutes... nothing. I will keep trying then
Click to expand...
Click to collapse
this is as i know not a modded rom.
Can you reflash the rom and try it with this app https://play.google.com/store/apps/details?id=com.themonsterit.EngineerStarter&hl=en if this not going type it here or make a new Thread and ask how to recover your imei.
lucki1000 said:
this is as i know not a modded rom.
Can you reflash the rom and try it with this app https://play.google.com/store/apps/details?id=com.themonsterit.EngineerStarter&hl=en if this not going type it here or make a new Thread and ask how to recover your imei.
Click to expand...
Click to collapse
This is my situation... cant even flash with sp flashtool anymore
xdadeem said:
This is my situation... cant even flash with sp flashtool anymore
Click to expand...
Click to collapse
Have you try another cable?
lucki1000 said:
Have you try another cable?
Click to expand...
Click to collapse
Oh... that was my best cable... do they suddenly stop working for flash because its working fine as a charger still
xdadeem said:
Oh... that was my best cable... do they suddenly stop working for flash because its working fine as a charger still
Click to expand...
Click to collapse
So you try another cable?
lucki1000 said:
So you try another cable?
Click to expand...
Click to collapse
Yes I have and its same thing... I dont have much knowledge in these,just a little but could this have anything to do with bootloader etc I dont know
xdadeem said:
Yes I have and its same thing... I dont have much knowledge in these,just a little but could this have anything to do with bootloader etc I dont know
Click to expand...
Click to collapse
You can try to Format only the whole Phone like bootloader and then Format and Download again.
lucki1000 said:
You can try to Format only the whole Phone like bootloader and then Format and Download again.
Click to expand...
Click to collapse
What does this message mean? after 35 minutes
xdadeem said:
What does this message mean? after 35 minutes
Click to expand...
Click to collapse
Did you can try it with windows? Or try only Download and manually format it with the tab format.
or you use from another source but it should be the same https://docs.google.com/uc?id=0By4_z1Byo7UKYUh1Y1FQY3NrUjQ&export=download.
It is maybe a distro problem can you tell me which distro you are using?
I have it tested 10 minutes ago by me it works fine.
I got an error while flashing official fastboot ROM on my note 7 pro "error: FAILED (remote: Error: Last flash failed: Volume Full)", after this my device system got destroyed. how can I flash fastboot rom on Redmi note 7 pro?
debadri1995 said:
I got an error while flashing official fastboot ROM on my note 7 pro "error: FAILED (remote: Error: Last flash failed: Volume Full)", after this my device system got destroyed. how can I flash fastboot rom on Redmi note 7 pro?
Click to expand...
Click to collapse
This most likely happened due to an incompatible flash or incomplete one.
Now try the clear all option and format your phone completely before flashing MIUI again.
Also what OS were you running when this happened?
Naveenthemi said:
This most likely happened due to an incompatible flash or incomplete one.
Now try the clear all option and format your phone completely before flashing MIUI again.
Also what OS were you running when this happened?
Click to expand...
Click to collapse
Before flashing i was using v10.3.7.0 (which was flashed by service center engineers using EDL mode.) And the Flashtool version was 2018.5.28.0.
Naveenthemi said:
This most likely happened due to an incompatible flash or incomplete one.
Now try the clear all option and format your phone completely before flashing MIUI again.
Also what OS were you running when this happened?
Click to expand...
Click to collapse
oh, I forgot to tell you, I got the error while the system partition was flashing.. so definitely it was a incomplete flash.
debadri1995 said:
oh, I forgot to tell you, I got the error while the system partition was flashing.. so definitely it was a incomplete flash.
Click to expand...
Click to collapse
1. Now download the flashboot ROM u want
2.Now select the flash all including storage option
3. Try flashing it now
It should be successful as this will wipe out the existing OS and install a new one
Also u will lose your data so I hope u had a backup..
If anyone on 10.3.9 & facing bugs & want to downgrade then unlock bootloader & then download minimal adb toolkit extract it & copy the extracted fastboot rom files into minimal adb folder & then put your phone into fastboot mode & then run clear all & install.bat inside the extracted folder & wait for it to finish & you will be able to downgrade because you wont be able to downgrade with mi flash, its a tested process by me as i bricked my bootloader unlocked phone which was only going to fastboot mode, i recovered by this process.
Naveenthemi said:
1. Now download the flashboot ROM u want
2.Now select the flash all including storage option
3. Try flashing it now
It should be successful as this will wipe out the existing OS and install a new one
Also u will lose your data so I hope u had a backup..
Click to expand...
Click to collapse
yes, i did the same as you said.. i know this fastboot flashing process but i got that error while flashing..
navi_58861170 said:
If anyone on 10.3.9 & facing bugs & want to downgrade then unlock bootloader & then download minimal adb toolkit extract it & copy the extracted fastboot rom files into minimal adb folder & then put your phone into fastboot mode & then run clear all & install.bat inside the extracted folder & wait for it to finish & you will be able to downgrade because you wont be able to downgrade with mi flash, its a tested process by me as i bricked my bootloader unlocked phone which was only going to fastboot mode, i recovered by this process.
Click to expand...
Click to collapse
this is useful.. thanks
You can also check that YouTube video how to flash voilet.
https://youtu.be/kjzZZjj41aM
debadri1995 said:
yes, i did the same as you said.. i know this fastboot flashing process but i got that error while flashing..
Click to expand...
Click to collapse
Oh, do u have the TWRP by Petercxy to installed and accessible? If u do u can flash the ROM through that.
(The official TWRP for this device can't)
Naveenthemi said:
Oh, do u have the TWRP by Petercxy to installed and accessible? If u do u can flash the ROM through that.
(The official TWRP for this device can't)
Click to expand...
Click to collapse
naah, don't have that..
debadri1995 said:
naah, don't have that..
Click to expand...
Click to collapse
Flash that
Naveenthemi said:
Flash that
Click to expand...
Click to collapse
don't wanna mesh with my phone..
debadri1995 said:
don't wanna mesh with my phone..
Click to expand...
Click to collapse
U already did ?*
Naveenthemi said:
U already did ?*
Click to expand...
Click to collapse
? I don't wanna mess with my phone again* I flashed the stock firmware using Mi FlashPro
debadri1995 said:
? I don't wanna mess with my phone again* I flashed the stock firmware using Mi FlashPro
Click to expand...
Click to collapse
Oh ok u never mentioned that...good work tho...
Naveenthemi said:
Oh ok u never mentioned that...good work tho...
Click to expand...
Click to collapse
yeah I didn't, but I was queries if its a Flashtool bug or My note 7 pro's bug..
debadri1995 said:
yeah I didn't, but I was queries if its a Flashtool bug or My note 7 pro's bug..
Click to expand...
Click to collapse
It's probably something to do with your phone...
my bootloader is lockd how to flash rom file with mi flash
gsunil said:
my bootloader is lockd how to flash rom file with mi flash
Click to expand...
Click to collapse
First unlock the bootloader, you won't be able to flash till the bootloader is unlocked...
Plz plz read it at least once
I was flashing miui 12 OTA through orange fox recovery. Now my phone is dead. It can boot into recovery, fastboot flawlessly. It is detected in miflash also but whenever I am trying to flash miui 11 any version stock rom it gives error "cannot recieve hello packet". I have flashed many roms from orange fox and all of them flashed successfully but it is booting to recovery only. Plzz help
PS : I have read many threads but remove the battery /let the battery drain out method was not much explanatory so I couldn't understand it.. Plz anyone can suggest alternative method or same method in detail.
bro download proper fastboot rom,then extract twice via 7zip
then u will be able to flash via mi tool.
https://xiaomifirmwareupdater.com/miui/violet/stable/V11.0.10.0.PFHINXM/
tell me if it works or not.
I already have done it bro... Not working at all
Subrata520 said:
bro download proper fastboot rom,then extract twice via 7zip
then u will be able to flash via mi tool.
https://xiaomifirmwareupdater.com/miui/violet/stable/V11.0.10.0.PFHINXM/
tell me if it works or not.
Click to expand...
Click to collapse
I already have done it bro.. It doesn't work at all
PratikOimbe said:
I already have done it bro.. It doesn't work at all
Click to expand...
Click to collapse
i used this method to flash fastboot rom, and it works.no error at all.
do u try to lock ur bootloader?
just select clean all tab only.
PratikOimbe said:
I already have done it bro.. It doesn't work at all
Click to expand...
Click to collapse
Whats the error?
Is it flashing successfully? Or cant flash at all
Subrata520 said:
bro download proper fastboot rom,then extract twice via 7zip
then u will be able to flash via mi tool.
https://xiaomifirmwareupdater.com/miui/violet/stable/V11.0.10.0.PFHINXM/
tell me if it works or not.
Click to expand...
Click to collapse
Subrata520 said:
i used this method to flash fastboot rom, and it works.no error at all.
do u try to lock ur bootloader?
just select clean all tab only.
Click to expand...
Click to collapse
I had selected clean all tab only.. But nothing work out
shimalxavier said:
Whats the error?
Is it flashing successfully? Or cant flash at all
Click to expand...
Click to collapse
Cannot recieve hello packet error and then flashing fails within seconds..
But I had flashed this same file few months back easily but after I bricked my phone as I mentioned in OP it is giving error
PratikOimbe said:
Cannot recieve hello packet error and then flashing fails within seconds..
But I had flashed this same file few months back easily but after I bricked my phone as I mentioned in OP it is giving error
Click to expand...
Click to collapse
I think you need to remove the battery and try..im not sure though...
Try searching for this error...its a kind of general error so you would find an answer in some other device section
First of all download miui 11 recovery zip file for violet, after that boot into pitch black recovery, then wipe all partitions you see there and must format data then reboot to pitch black recovery again now place the zip file into your phone and flash and you will be good to go
Here is the link:-
http://bigota.d.miui.com/V11.0.2.0.QFHINXM/miui_VIOLETINGlobal_V11.0.2.0.QFHINXM_73c0bc5751_10.0.zip
Hello everyone,does anybody here have this dump file?
oppo_custom.img
Badly need this thank you.
Better dump it yourself or extract it from stock firmware.
Oppo A54 CPH2239 Stock Firmware ROM (Flash File)
Download the official Oppo A54 CPH2239 Stock ROM Firmware (Flash File) without any password for Free. We have also provided the Stock ROM for other Oppo devices.
oppostockrom.com
link if u need.
I recommend dumping through SP FlashTool
llxxVENOMxxll said:
Oppo A54 CPH2239 Stock Firmware ROM (Flash File)
Download the official Oppo A54 CPH2239 Stock ROM Firmware (Flash File) without any password for Free. We have also provided the Stock ROM for other Oppo devices.
oppostockrom.com
link if u need.
I recommend dumping through SP FlashTool
Click to expand...
Click to collapse
Hello, thank you for your reply.
But oppo_custom.img is not included from any firmware.
It can only access through dumping files from phone.
Just like nvdata,nvram
iphoneyeta said:
Hello, thank you for your reply.
But oppo_custom.img is not included from any firmware.
It can only access through dumping files from phone.
Just like nvdata,nvram
Click to expand...
Click to collapse
ya sorry i forgot it.
But the easiest way is to use the kamakiri way. It works for OPPO A54.
llxxVENOMxxll said:
ya sorry i forgot it.
But the easiest way is to use the kamakiri way. It works for OPPO A54.
Click to expand...
Click to collapse
hello,thank you.
can you gave me some information about kamariki way?
i don't have any idea of that
iphoneyeta said:
hello,thank you.
can you gave me some information about kamariki way?
i don't have any idea of that
Click to expand...
Click to collapse
*Install all MTK drivers ( VCOM, CDC and fastboot)
Follow below guide. **To boot to edl mode press vol.+ And vol - in powered off mode.**
*https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4229937/
iphoneyeta said:
hello,thank you.
can you gave me some information about kamariki way?
i don't have any idea of that
Click to expand...
Click to collapse
A much complete guide here
[GUIDE] How to bypass authentication and flash in EDL with NO auth for FREE
Thanks to: chaosmaster / k4y0z: GitHub / XDA xyzz / xyz`: GitHub / XDA Dinolek: GitHub / XDA How to install: 1. Download the attached file: VD171_MTK-bypass.zip. 2. Extract the file and open the folder. 3. Run and install python...
forum.xda-developers.com
You may follow this.
Hope it helps.
iphoneyeta said:
hello,thank you.
can you gave me some information about kamariki way?
i don't have any idea of that
Click to expand...
Click to collapse
If you will download, u r flashing.
If u will 'readback' you will be dumping a backup
iphoneyeta said:
Hello everyone,does anybody here have this dump file?
oppo_custom.img
Badly need this thank you.
Click to expand...
Click to collapse
May I just know why did you want to back up that partition? Jus for some knowledge
Anyone knows how to unlock the bootloader of Oppo a54 cph2239
John. P. John said:
Anyone knows how to unlock the bootloader of Oppo a54 cph2239
Click to expand...
Click to collapse
Officially, no way.
But you may try mtkclient. It surely works, but fastboot is still inaccessible. U will need to flash files manually, either using the same or using SP Flash.
llxxVENOMxxll said:
Officially, no way.
But you may try mtkclient. It surely works, but fastboot is still inaccessible. U will need to flash files manually, either using the same or using SP Flash.
Click to expand...
Click to collapse
On Android 10 the fastboot was fine
Edit: Fastbootd works.. Fastboot won't work cause you need to unlock using in-depth tool, which at the moment is not possible
How to flash oppo_custom? I've tried some flash tools but that couldn't be done, it says that "Verified blablabla"
I got OPPO A54 cph2239, now my phone is stuck at boot with text "Download not complete! Please blabla"...
XinxC0d3 said:
How to flash oppo_custom? I've tried some flash tools but that couldn't be done, it says that "Verified blablabla"
I got OPPO A54 cph2239, now my phone is stuck at boot with text "Download not complete! Please blabla"...
Click to expand...
Click to collapse
I usually untick opporeserve2 cause that gives me error. Make sure the flashing process is completed without any errors. You should get a green tick at the end of flashing
Johannj22 said:
I usually untick opporeserve2 cause that gives me error. Make sure the flashing process is completed without any errors. You should get a green tick at the end of flashing
Click to expand...
Click to collapse
Yes sir, I have the green checklist at the end of the flash, but still... the phone said the download is not completed.
I searched on the internet about flashing oppo_custom.img, and Im done it with help of mkclient from brkler on github. Now the text "Download not completed" is dissappeared, but the phone is looping at the boot oppo logo only then turn off again, im trying to go to fastboot, but it can't, then I decide to flash it again, the text "Download not completed!" now is appear again...
Im stuck again now...
XinxC0d3 said:
Yes sir, I have the green checklist at the end of the flash, but still... the phone said the download is not completed.
I searched on the internet about flashing oppo_custom.img, and Im done it with help of mkclient from brkler on github. Now the text "Download not completed" is dissappeared, but the phone is looping at the boot oppo logo only then turn off again, im trying to go to fastboot, but it can't, then I decide to flash it again, the text "Download not completed!" now is appear again...
Im stuck again now...
Click to expand...
Click to collapse
Can you tell me from white site you downloaded the stock firmware?
So I've tried downgrading binary but instead of booting it just shutted down and only boots into brom mode I already tried to restore with different binary but gives "anti-roolback error...
Does anyone have the firmware for sp flash tool on binary 5 ? Or can someone create one? Because I really need the phone working.
Thanks in advance
I think I might be in this position, which Android version is that for?
Decmanager said:
I think I might be in this position, which Android version is that for?
Click to expand...
Click to collapse
Its for android 12 binary 5
Thanks in advance
I found this, does that help?
Decmanager said:
I found this, does that help?
Click to expand...
Click to collapse
Yes I have this tool and I can help you with it.
dda7lite said:
So I've tried downgrading binary but instead of booting it just shutted down and only boots into brom mode I already tried to restore with different binary but gives "anti-roolback error...
Does anyone have the firmware for sp flash tool on binary 5 ? Or can someone create one? Because I really need the phone working.
Thanks in advance
Click to expand...
Click to collapse
Just try this tutorial and make the scatter firmware for your phone
How to create MTK scatter firmware for Samsung A12F using CSC file!
Create MTK Scatter Firmware Samsung A12F using odin firmware! This firmware can be used to flash the device using SP Flash Tool in BROM mode. Requirements: 1. CSC file from the Odin Firmware 2. MTK Auth Bypass Tool (Credits: Mofadal...
forum.xda-developers.com
Decmanager said:
I found this, does that help?
Click to expand...
Click to collapse
phone stopped getting into brom mode it imediatly disconnects
dda7lite said:
phone stopped getting into brom mode it imediatly disconnects
Click to expand...
Click to collapse
You might need Auth bypass tool, if your phone pops up in device manager (windows) and then disconnects and pops back over and over, you need to bypass the protection with Auth bypass tool. Hope that helps
Decmanager said:
You might need Auth bypass tool, if your phone pops up in device manager (windows) and then disconnects and pops back over and over, you need to bypass the protection with Auth bypass v30 tool (I think that's the latest version). Hope that helps
Click to expand...
Click to collapse
now its giving verified boot error :/
dda7lite said:
now its giving verified boot error :/
Click to expand...
Click to collapse
I'm facing the same problem with mine after frp unlock, I didn't use this file but have the same problem right now after accidentally wipe my partitions.
Personally I've tried everything Inc test point, other than JTAG/ Z3X which is my next move I can't find a way out of this atm.
Decmanager said:
I'm facing the same problem with mine after frp unlock, I didn't use this file but have the same problem right now after accidentally wipe my partitions.
Personally I've tried everything Inc test point, other than JTAG/ Z3X which is my next move I can't find a way out of this atm.
Click to expand...
Click to collapse
So now our phones are bricked ?
dda7lite said:
So now our phones are bricked ?
Click to expand...
Click to collapse
What was your problem, why did you need U5 binary?
Decmanager said:
What was your problem, why did you need U5 binary?
Click to expand...
Click to collapse
Yes but now it gives that error
Was it because you tried unlock FRP?
Decmanager said:
Was it because you tried unlock FRP?
Click to expand...
Click to collapse
No tried to downgrade binary
As far as I understand, you can't downgrade binary. I think now you need flash phone with original binary and Android version you had installed... but please do research as I'm not 100% sure.
If you find the way, let me know as I will attempt to flash mine again shortly.
Decmanager said:
As far as I understand, you can't downgrade binary. I think now you need flash phone with original binary and Android version you had installed... but please do research as I'm not 100% sure.
If you find the way, let me know as I will attempt to flash mine again shortly.
Click to expand...
Click to collapse
I did try but this error is making it impossible it was tried to downgrade to binary 4/3 I think and it was on 5 so now that I try to restore it back it gives this error
Did you flash just DOWLOAD or FORMAT ALL? Or did you just flash scatter?
Decmanager said:
Did you flash just DOWLOAD or FORMAT ALL? Or did you just flash scatter?
Click to expand...
Click to collapse
Tried both and they gave same error
Or just scatter?
dda7lite said:
Tried both and they gave same error
Click to expand...
Click to collapse
You might have wiped your partitions, I think that's what I did with mine.
Is your error:
"Status sec imghdr type mismatch" ?
My advice, stop flashing and start trying to read / back up anything you can.
I made the mistake to go ham (crazy) with trying different things and flashing different files which broke it completely.
Take screen shots of any errors if you can.