Maybe formatted phone or by installing kitkat for q3000.. it's like hard brick .. please someone help ..:crying::crying::crying:
AAAni said:
Maybe formatted phone or by installing kitkat for q3000.. it's like hard brick .. please someone help ..:crying::crying::crying:
Click to expand...
Click to collapse
is it booting and can u go in recovery mode...
AAAni said:
Maybe formatted phone or by installing kitkat for q3000.. it's like hard brick .. please someone help ..:crying::crying::crying:
Click to expand...
Click to collapse
Simply downgrade to Jelly bean!
Hi guys plz help me to solve this problem : Error 4032 (Enable DRAM FAILED) when trying to flash
not booting.. not even showing charging.. sp tool says
Error 4032 (Enable DRAM FAILED).. no recovery.. :crying:
AAAni said:
Hi guys plz help me to solve this problem : Error 4032 (Enable DRAM FAILED) when trying to flash
Click to expand...
Click to collapse
Uninstall drivers from pc and reinstall them correctly, then flash it again.
Sent from my XOLO Q3000
not helping..:crying:
AAAni said:
not helping..:crying:
Click to expand...
Click to collapse
U need to flash whole stock rom either Jelly bean or kitkat as u like.
Xolo Q3000 KK S007 27-05-2014.zip
q3000 stock jb 4.2 s011.7z
download one of above as per ur chioce.
extract it in folder.
download sp flash tools.
Extract it in a folder.
Start sptools.exe
choose scatter loading.
select scatter file from above downloaded firmware folder.
select firmware upgrade.
press download
connect ur mobile in switch off condition.
wait till green circle appears.
Start u mobile.
U need drivers installed before the procedure.
tried every sp tool version ..:crying:
tried many rom ..:crying:
even official roms from needrom.com and androidxda.com
and also the link you've given..(Xolo Q3000 KK S007 27-05-2014.zip & q3000 stock jb 4.2 s011.7z ):crying:
but same error :crying:
BROOM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM failed!
[HINT]:
please check your load matches to your target which is to be downloaded
please someone help me out..:crying:
AAAni said:
tried every sp tool version ..:crying:
tried many rom ..:crying:
even official roms from needrom.com and androidxda.com
and also the link you've given..(Xolo Q3000 KK S007 27-05-2014.zip & q3000 stock jb 4.2 s011.7z ):crying:
but same error :crying:
BROOM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM failed!
[HINT]:
please check your load matches to your target which is to be downloaded
please someone help me out..:crying:
Click to expand...
Click to collapse
Just explain each step u doing from the very beginning?
Have u selected firmware upgrade option??
Also post some screenshots
My phone was dead after I formatted with option of "format all + download " in sp tool:crying:
was using "PXZ2-4.3.5-q3000 working" and tried to flash "Xolo Q3000 KK S007 27-05-2014" but i think the process was not successful :crying: and now my phone behave like hard brick but it still recognize by pc without battery but usb port disappear frequently ..
I found 1 solution .. can any one upload backup rom of q3000 using "MTK droid tools" please please please .. http://forum.xda-developers.com/showthread.php?t=2447431&page=5 avi3230 bro ... can you make attachment like in this link of preloder and scatter file for q3ooo?
AAAni said:
My phone was dead after I formatted with option of "format all + download " in sp tool:crying:
was using "PXZ2-4.3.5-q3000 working" and tried to flash "Xolo Q3000 KK S007 27-05-2014" but i think the process was not successful :crying: and now my phone behave like hard brick but it still recognize by pc without battery but usb port disappear frequently ..
I found 1 solution .. can any one upload backup rom of q3000 using "MTK droid tools" please please please .. http://forum.xda-developers.com/showthread.php?t=2447431&page=5 avi3230 bro ... can you make attachment like in this link of preloder and scatter file for q3ooo?
Click to expand...
Click to collapse
Just flash the "Xolo Q3000 KK S007 27-05-2014" firmware as normal, everything will be fine.
Just select firmware upgrade option.
These files are all base files including preloader and scatter ok.
Ur error is cause u formatted preloader , just restore preloader ur phone will boot. :good::good:
If still u cant do it, just PM me.
see this.. error remain same :crying::crying::crying:
Lets start from the base,
Which version of windows r u using & did u hv admin rights?
Sent from my XOLO Q3000 using XDA Free mobile app
tired windows 8.1 32bit & 64 bit, windows 7 32bit with administrative right
In windows 7, install 32 bit drivers, download so flash tool from mtk's official site and flash stock job if ur phone u received with jb ROM else flash kk rom. Flash phone without battery, sim n memory card. Also before flashing, connect our phone with battery inserted and power on. Look whether driver is installed. Drivers to install: mobistel cynus, vcom, pdanet and adb drivers.
Sent from my Q3000 using XDA Free mobile app
its better to take it xolo care..they might charge u but atleast u will get ur phone back...
Same thing happend to me ...
:crying: :crying: After doing a "whole flash format " ... I am able to flash (XOLO Q3000) STOCK ROMS successfully ... But when i start my phone it gets STUCK on BOOTLOOP .... it not charging too..... PLZ HELP ME GUYZ ... wats going wrong here ??? :crying::crying:
---------- Post added at 12:40 PM ---------- Previous post was at 12:35 PM ----------
davis.arkel said:
:crying: :crying: After doing a "whole flash format " ... I am able to flash (XOLO Q3000) STOCK ROMS successfully ... But when i start my phone it gets STUCK on BOOTLOOP .... it not charging too..... PLZ HELP ME GUYZ ... wats going wrong here ??? :crying::crying:
Click to expand...
Click to collapse
and its not entering CUSTOM RECOVERY MODE ALSO (after flashing custom recovery ).. PLZ PLZ PLZ HELP GUYZ ...
davis.arkel said:
:crying: :crying: After doing a "whole flash format " ... I am able to flash (XOLO Q3000) STOCK ROMS successfully ... But when i start my phone it gets STUCK on BOOTLOOP .... it not charging too..... PLZ HELP ME GUYZ ... wats going wrong here ??? :crying::crying:
---------- Post added at 12:40 PM ---------- Previous post was at 12:35 PM ----------
and its not entering CUSTOM RECOVERY MODE ALSO (after flashing custom recovery ).. PLZ PLZ PLZ HELP GUYZ ...
Click to expand...
Click to collapse
Please explain the procedure u followed mentioning the stock rom links.
avi3230 said:
Please explain the procedure u followed mentioning the stock rom links.
Click to expand...
Click to collapse
Well, i was using HNY 15 series ROM(rooted)... and My battery was a bit low .... and the rom had fair number of ISSUES and BUGS ... so i booted into recovery mode and tried to instal a backup to RESTORE the stock version of android, I was using before .... it failed to complete that and got bricked .....
Every tym i started the phone it got stuck in boot loop .... I tried to flash the stock rom (2 -3 times) ( which i flashed before and was using it )...
BUT NO LUCK ... it did the same bootloop thing ...I tried to enter custom recovery (after flashing philz recovery immediately after flashing the rom )...it worrked 2-3 times but after then, no luck , i wasn't able to boot into recovery also ...
SO I got fed-up and made A "WHOLE FORMAT FLASH" (using sp flash tools) ....
After that my device was detected as UNKNOWN DEVICE ... then i searched the forums and was able to install drivers FOR WINDOWS 8......
and i was able to flash again .... later i tried the rom " XOLO Q3000 KK S007 27-05-2014" and stock rom from some website (the one which i was using before)
and one more "XOLO Q3000 S003 15102013" both the first and last roms were given by (xda xolo q3000 member .... i dont remember his name .. but i guess you know him)
1 out of 5 times i am able to get into recovery mode (after flashing custom recovery ) ..... once in CR mode I tried to format INTERNAL SD and it showed " "ERROR : unable to format internal storage "
AND i did a memory test also and everything was good except ERROR: NAND FLASH NOT FOUND .....
.. THANKS IN ADVANCD .... PLz Help
davis.arkel said:
Well, i was using HNY 15 series ROM(rooted)... and My battery was a bit low .... and the rom had fair number of ISSUES and BUGS ... ........
Click to expand...
Click to collapse
follow this link.
use sptools.
if u use version 3 use firmware upgrrade option.
if u use version 5 use fomat+dowload option.
Related
I successfully installed the [IndiAndroid](http://forum.xda-developers.com/showthread.php?t=2000453&page=7) through CWM (it showed the words successful and completed) but now when I boot into normal mode it just hangs at the start screen "SUPERFONE CANVAS 2".
I don't know how else to get to the recovery mode for this phone [Micromax a110] except through MobileUncle app but the phone won't start. Any help appreciated...
iBrickYouNot said:
I successfully installed the [IndiAndroid](http://forum.xda-developers.com/showthread.php?t=2000453&page=7) through CWM (it showed the words successful and completed) but now when I boot into normal mode it just hangs at the start screen "SUPERFONE CANVAS 2".
I don't know how else to get to the recovery mode for this phone [Micromax a110] except through MobileUncle app but the phone won't start. Any help appreciated...
Click to expand...
Click to collapse
Go into recovery mode by first switching off your device. Then press volume up, down and power button all together to go into recovery when light flashes. Then you can try flashing stock rom and see what happens after that
OR
follow this guide
http://d-h.st/pt2
iBrickYouNot said:
I successfully installed the [IndiAndroid](http://forum.xda-developers.com/showthread.php?t=2000453&page=7) through CWM (it showed the words successful and completed) but now when I boot into normal mode it just hangs at the start screen "SUPERFONE CANVAS 2".
I don't know how else to get to the recovery mode for this phone [Micromax a110] except through MobileUncle app but the phone won't start. Any help appreciated...
Click to expand...
Click to collapse
Hey Just Go to Recovery Mode Again and Do a Data Reset...
Thats all..
If you have bricked your phone you can flash it using sp flash tool with the stock rom.
hello everybody
sorry if have done anything wrong by starting or posting in wrong thread.......really apologies for that...
I have purchased micromax a110 and every thing was fine with that phone.i even flashed it to v2 ROM and things were fine even then(only problem i observed was with display having light faded up images of previous things displayed....don't know but feel may be due to screen refresh rate)
Yesterday i happened to find [MICROMAX A110] ROM of Mobistel Cynus T2 http://forum.xda-developers.com/showthread.php?t=2060482
did as things were mentioned in post and everything was good and smooth
i then thought of reverting back to V2 ROM and flashed A110 with Sp flash tool,flashed correctly and phone was running normally........but i saw the options in sp flash tool and selected memory test option and selected all options and started the test after test finished i was not able to start the phone........ i then again flashed with v2 ROM and it started but iam getting invalid imei and NVram warning as WiFi network please help me to resolve this ......phones working properly but shows imei invalid and WiFi network i tried to root but cant even root the phone now
I had the same probelm!!
iBrickYouNot said:
I successfully installed the [IndiAndroid](http://forum.xda-developers.com/showthread.php?t=2000453&page=7) through CWM (it showed the words successful and completed) but now when I boot into normal mode it just hangs at the start screen "SUPERFONE CANVAS 2".
I don't know how else to get to the recovery mode for this phone [Micromax a110] except through MobileUncle app but the phone won't start. Any help appreciated...
Click to expand...
Click to collapse
ALL THE ABOVE METHODS DONT WORK!! I Bricked my phone to..so read on!!
Okay so here is what you have to do!!
1.Flash yourself into CWM recovery& create a backup of your file data as this method will erase everything!!
2.Enter into Advanced options>Mount SD card
3.Copy whichever ROM package you have pre-installed into the SD CARD which is mounted(In my case RADEON ROM*)
And now go to Install option from SD Card>Radeon Rom..and Voila its back from the DEAD!!
P.S: Backup is 100%essential & I'm not liable if you do not backup your data using CWM
Cheers!!
mayur.3.92 said:
hello everybody
sorry if have done anything wrong by starting or posting in wrong thread.......really apologies for that...
I have purchased micromax a110 and every thing was fine with that phone.i even flashed it to v2 ROM and things were fine even then(only problem i observed was with display having light faded up images of previous things displayed....don't know but feel may be due to screen refresh rate)
Yesterday i happened to find [MICROMAX A110] ROM of Mobistel Cynus T2 http://forum.xda-developers.com/showthread.php?t=2060482
did as things were mentioned in post and everything was good and smooth
i then thought of reverting back to V2 ROM and flashed A110 with Sp flash tool,flashed correctly and phone was running normally........but i saw the options in sp flash tool and selected memory test option and selected all options and started the test after test finished i was not able to start the phone........ i then again flashed with v2 ROM and it started but iam getting invalid imei and NVram warning as WiFi network please help me to resolve this ......phones working properly but shows imei invalid and WiFi network i tried to root but cant even root the phone now
Click to expand...
Click to collapse
Write ur imei by own.. how plz visit dis linkandroidforums.com/a75-all-things-root/542716-how-unbrick-a75-if-bricked-using-recovery.html
Sent from my Cynus T2 using xda app-developers app
Thanx but what about no am error being showed up as open wifi network
plz help stuck at recoverymode
imridul said:
ALL THE ABOVE METHODS DONT WORK!! I Bricked my phone to..so read on!!
Okay so here is what you have to do!!
1.Flash yourself into CWM recovery& create a backup of your file data as this method will erase everything!!
2.Enter into Advanced options>Mount SD card
3.Copy whichever ROM package you have pre-installed into the SD CARD which is mounted(In my case RADEON ROM*)
And now go to Install option from SD Card>Radeon Rom..and Voila its back from the DEAD!!
P.S: Backup is 100%essential & I'm not liable if you do not backup your data using CWM
Cheers!!
Click to expand...
Click to collapse
but if when i go to recovery mode it just hangs how can i backup or tell me how to flash please tell me
saadderaiya said:
but if when i go to recovery mode it just hangs how can i backup or tell me how to flash please tell me
Click to expand...
Click to collapse
Flash the Stock V2 via the SP Tool.
http://forum.xda-developers.com/showthread.php?t=1982587 [TUT]MTK Android (Sp flash tool ) tutorial
http://forum.xda-developers.com/showthread.php?t=1960080 check the first post for the Stock V2 ROM
similar issue ,
Let me try what VipinKC says
un brick
ravee1010 said:
similar issue ,
Let me try what VipinKC says
Click to expand...
Click to collapse
install stock rom by sp flash tool you phone will return to normal link is in down
http://forum.xda-developers.com/showthread.php?t=2167244
vjdsivakumar said:
install stock rom by sp flash tool you phone will return to normal link is in down
http://forum.xda-developers.com/showthread.php?t=2167244
Click to expand...
Click to collapse
Yes done already!
I put stock JB
rooted it
and installed LEWA v4 by seshu .........it rocks
Now am bulk installing apps .......
nice
ravee1010 said:
Yes done already!
I put stock JB
rooted it
and installed LEWA v4 by seshu .........it rocks
Now am bulk installing apps .......
Click to expand...
Click to collapse
nice work enjoy
Bricked a110
Guyz, i recently installed CWM on my a110, but somhow while testing the features, i installed 12 mp patch and rebooted the phone. But it got stuck on the boot screen. And then i again went to CWM and done all this:
Fomat Data
Format System
Format Cache
And now its just hanged on to boot screen and am afraid that i have just done the biggest mistake.
Any help will be very thankful..
Plzz Reply Fast...
Similar but Different Problem
I may have a similar problem, big bros. Please check this thread. Sorry for bothering. I really need help.
http://forum.xda-developers.com/showthread.php?p=53004045
use
saadderaiya said:
but if when i go to recovery mode it just hangs how can i backup or tell me how to flash please tell me
Click to expand...
Click to collapse
SP tool and flash stock rom through sp tools
If u have nandroid backtup then restore it
Sent from my A250 SUVI ROM v16 AURA using XDA Premium 4 mobile app
I tried online method which shows ‘AT+EGMR=1,7...but did not worked it shows :THIS COMMAND IS NOT ALLOWED IN USERBUILD"
HOW TO SOLVE?
Plz reply soon phone is on without network
PLZ REPLY
ashuchem said:
I tried online method which shows ‘AT+EGMR=1,7...but did not worked it shows :THIS COMMAND IS NOT ALLOWED IN USERBUILD"
HOW TO SOLVE?
Click to expand...
Click to collapse
see this post
http://forum.xda-developers.com/showpost.php?p=54727236&postcount=1
Thank you very much
Solved
ashuchem said:
Solved
Click to expand...
Click to collapse
U can always hit the thanks button
help
avi3230 said:
see this post
http://forum.xda-developers.com/showpost.php?p=54727236&postcount=1
Click to expand...
Click to collapse
it is not flashing installation aborted
smahalgavaiya said:
it is not flashing installation aborted
Click to expand...
Click to collapse
Just flash philz or ctr recovery and then flash the created zip via it.
but what u were doing so u got invalid imei
sim card not detected after flashing KK stock rom plz help fast this method not working
yashsartanpara said:
sim card not detected after flashing KK stock rom plz help fast this method not working
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=ierbMHOQGeQ&feature=player_embedded
http://cprcellphonerepair.blogspot.in/2014/10/mt6592-mt6589-mt6582-mt6572-mtk-change.html
mtkdroid method isnt working
i was just flashing stock kk after trying hive ui but in between ..my laptops power went off...and after flashing kk stock rom again i got invalid imei error.... (i flashed stock kk more then 10 times before but never got this problem)
Can costumer care fix this?
yashsartanpara said:
mtkdroid method isnt working
i was just flashing stock kk after trying hive ui but in between ..my laptops power went off...and after flashing kk stock rom again i got invalid imei error.... (i flashed stock kk more then 10 times before but never got this problem)
Can costumer care fix this?
Click to expand...
Click to collapse
flash with format + download option.
then try mtk droid tool method
Use sn write station
Sent from my Q3000 using XDA Free mobile app
Fixed
Thank you ... Fixed problem
Format + Download kk rom and then flashed imei_flashable using cwm
thank you
Nice
Sent from my Q3000 using XDA Free mobile app
Any body have Ubuntu linux, i need disk image
sachin.r.fulzele said:
Any body have Ubuntu linux, i need disk image
Click to expand...
Click to collapse
what disk image u need.
do u work on ubuntu.
If yes i need ur help in compiling kernel and drivers for xolo q3000.
if we build it we can port CM11 and other such roms.
u can download ubuntu from their website for free.
I'm also looking it for the same purpose, bt nw I've exams from 1st dec , so we will try this after exams over. Thanx doc
Sent from my Q3000 using XDA Free mobile app
CyanogenMod 11 for Micromax A092
Ported by darshan1205 (Darshan Manjrekar)
Bugs Known
2.99 GB partition not detected
Move to SD not available
Flash KitKat Firmware via fast boot to prevent FCS
Hit Thanks:good:
Link:https://www.4shared.com/zip/LBaTW5Lice/CM11-20150512-UNOFFICIAL-UNITE.html
Screen shots
System UI Crashes
when i installed it worked fine for a little bit of time but after that it says system ui has stopped working and if i open security settings it says settings has stopped working
prajwal2001 said:
when i installed it worked fine for a little bit of time but after that it says system ui has stopped working and if i open security settings it says settings has stopped working
Click to expand...
Click to collapse
Flash Kitkat Firmware then flash this ROM ...
Sent from my YU5510 using Tapatalk
darshan1205 said:
Flash Kitkat Firmware then flash this ROM ...
Sent from my YU5510 using Tapatalk
Click to expand...
Click to collapse
Where can I get kitkat firmware (first time installing a ROM )
prajwal2001 said:
Where can I get kitkat firmware (first time installing a ROM )
Click to expand...
Click to collapse
Download this KitKat Firmware of Moto A310 [a rebrand of Micromax A092] & flash it through fastboot
Link: https://drive.google.com/file/d/0B6oh79olFl8jSWk0dTRQcUJKYkE/view?usp=drivesdk
Sent from my YU5510 using Tapatalk
darshan1205 said:
Download this KitKat Firmware of Moto A310 [a rebrand of Micromax A092] & flash it through fastboot
Sent from my YU5510 using Tapatalk
Click to expand...
Click to collapse
Ok I fastbooted and installed kitkat firmware now i just have to install the rom right
---------- Post added at 08:26 AM ---------- Previous post was at 07:48 AM ----------
It Worked Thanks Alot!!!! Bhai:good
The ROM is working smoothly but the viberations for keyboard home and back button are not working
please help,
I flashed my phone by vroot. now Imei is showing null. no internal sd card is detected in phone but while attaching it with computer it shows.2.99 Gb available.
how to recover all those things again if i had not made any recovery for it
while updating in recovery mode everytime it shows verification failed installed aborted so updated version are not installing.
Plz Plz Plz help
pradeepkurmi said:
please help,
I flashed my phone by vroot. now Imei is showing null. no internal sd card is detected in phone but while attaching it with computer it shows.2.99 Gb available.
how to recover all those things again if i had not made any recovery for it
while updating in recovery mode everytime it shows verification failed installed aborted so updated version are not installing.
Plz Plz Plz help
Click to expand...
Click to collapse
First download the KitKat firmware from this link https://drive.google.com/file/d/0B6oh79olFl8jSWk0dTRQcUJKYkE/view?usp=drivesdk then extract it using winrar and open the folder fastboot download in it and double click on 8x10_fastboot_all_images and turn off your phone and then press and hold power button+volume down when you see the micromax logo connect it to your computer with usb and it flash kitkat on it then flash the cm11 rom via recovery
Please can you contact me via email. My email id is [email protected]
and my whastapp no. is 9699961332
I know how to flash Via recovery. Open Recovery Mode and select install from Sd card then select any update.zip but i dont know how to flash kitkat on it. Plz Help. Also i cannot find cm11 rom in this zip.
got it i had installed custom rom via fastboot but now wifi is not working
This link is not working please repair it or provide a new one
i done flash of your rom then i cant open my sequrity setting i.e, it was showing me "unfortunately, setting has been stopped"... Then i saw yr firmware that is something stuff fix kk.. i dont it same.. it all finished successful. the real part is now i cant open my recovery screen else the boot screen is in loop.. so give me some idea stuff which repair this thing. HELP!! And if im pressing volume with power.. it again and again restart please help: Anyways thanks brother.. now its Fine .. Thanks a ton.. can u uploads more updated rom like marshmallow??
link not working
on clicking the download option it displays invalid signature. please update the link
My phone gets stuck at boot image nothing happens in both phone and PC......
It shows waiting for device in PC and mmx liogo in phone forever
Q&A for PHILZ RECOVERY for SPICE MI509
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for PHILZ RECOVERY for SPICE MI509. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Not working...
Hi "Saurabh" i tried this procedure my Spice MI509 is showing Spice logo "S" and restarting continuously please help me out.
epsan said:
Hi "Saurabh" i tried this procedure my Spice MI509 is showing Spice logo "S" and restarting continuously please help me out.
Click to expand...
Click to collapse
How u flashing this recovery...???
Use mobile uncle tool...
It needs root and then place the recovery in sdcard after renaming It to recovery.img and then open Mobil uncle tool and select install recovery from sdcard and then select the recovery file...
Wait some time and your recovery will work now...
And I want to know that on which android version u r?? Kitkat or jelly bean???
saurabh1234 said:
How u flashing this recovery...???
Use mobile uncle tool...
It needs root and then place the recovery in sdcard after renaming It to recovery.img and then open Mobil uncle tool and select install recovery from sdcard and then select the recovery file...
Wait some time and your recovery will work now...
And I want to know that on which android version u r?? Kitkat or jelly bean???
Click to expand...
Click to collapse
Hey Thanks for reply, i resolved that issue by trying to turn on the phone by usb power, phone boots up normally but without any signal both sims are properly inserted but no signal (may be IMEI issue) how to resolve it???. ( procedure i followed for previous attempt, i am currently on JellyBean my stock android version(people say Mi509 come with KITKAT out of box but its not in case of my phone. i followed your procedure as it is, downloaded attachment and MobileUncle apk installed that apk , opened that uncle and selected recovery update and it automatically restarted.)
now i know that my standard Android Recovery was OVERWRITTEN by custom recovery and i DIDNT backup my stock recovery . what should i do. ( i read something about EFS partition which contains IMEI info which was corrupted by custom recovery i believe ). and also please send me backup of recovery partition (or EFS) to me @ [email protected] i will set my own IMEI nos using Enginering Mode apk . this is my only phone please help me
epsan said:
now i know that my standard Android Recovery was OVERWRITTEN by custom recovery and i DIDNT backup my stock recovery . what should i do. ( i read something about EFS partition which contains IMEI info which was corrupted by custom recovery i believe ). and also please send me backup of recovery partition (or EFS) to me @ [email protected] i will set my own IMEI nos using Enginering Mode apk . this is my only phone please help me
Click to expand...
Click to collapse
thats why i was asking about android version....
bcoz all roms and recovery available for MI509 uses KITKAT kernel and you flashed it on Jellybean...
here i attach the stock recovery of jellybean....
for fixing IMEI use this link.........
This will fix it permanently...
IMEI TOOL with video tutorial....https://docs.google.com/uc?id=0B5DM6ZSz3dh-eTQzV2VWck1Kckk&export=download
Database- http://www.mediafire.com/download/no1oo8rroq4uqtr/Database.rar
use database file from second link bcoz this database is for spice mi509....
and next time dont flash rom if you have jellybean
Hey "Sourabh" did i "bricked" my phone???? and how to overcome that please.............
---------- Post added at 02:44 PM ---------- Previous post was at 02:03 PM ----------
Again Thanks for the reply, i just came to know that..... i should back up efs directory thank you very much for your support, i will let you know the status once i finish all the countermeasures.
epsan said:
Hey "Sourabh" did i "bricked" my phone???? and how to overcome that please.............
---------- Post added at 02:44 PM ---------- Previous post was at 02:03 PM ----------
Again Thanks for the reply, i just came to know that..... i should back up efs directory thank you very much for your support, i will let you know the status once i finish all the countermeasures.
Click to expand...
Click to collapse
If your device I bricked then just flash stock firmware using sp flash tool...if you don't know how to ...
Then give it to service centre but don't tell them about rooting and flashing custom rom...
Bcoz if you tell them then they will cost you money...
saurabh1234 said:
If your device I bricked then just flash stock firmware using sp flash tool...if you don't know how to ...
Then give it to service centre but don't tell them about rooting and flashing custom rom...
Bcoz if you tell them then they will cost you money...
Click to expand...
Click to collapse
Hey "Saurabh" you didddit. i tried using SPFTool and its working i was able to get my imei nos also(but it took me two days to figure it out). NOW how do i upgrade my mobile to KITKAT do you have that rom. can you please send me that link(stock rom).
epsan said:
Hey "Saurabh" you didddit. i tried using SPFTool and its working i was able to get my imei nos also(but it took me two days to figure it out). NOW how do i upgrade my mobile to KITKAT do you have that rom. can you please send me that link(stock rom).
Click to expand...
Click to collapse
Above was mistyping I was writing 'is' but leaved at 'i'. But thats no problem.
Below is stock kitkat firmware....flash through spflashtool...
https://docs.google.com/uc?id=0B1F4thoxIkjEb3pMT0N1UEhmQ00
When flashing firmware is done then root your mobile and install the philz recovery using flashify or mobile uncle tool to install custom rom...
saurabh1234 said:
Above was mistyping I was writing 'is' but leaved at 'i'. But thats no problem.
Below is stock kitkat firmware....flash through spflashtool...
https://docs.google.com/uc?id=0B1F4thoxIkjEb3pMT0N1UEhmQ00
When flashing firmware is done then root your mobile and install the philz recovery using flashify or mobile uncle tool to install custom rom...
Click to expand...
Click to collapse
Thank you very much "Saurabh" it really worked and i am running stock KITKAT now and will change it to custom rom very soon... again Thank you very much :good:
epsan said:
Thank you very much "Saurabh" it really worked and i am running stock KITKAT now and will change it to custom rom very soon... again Thank you very much :good:
Click to expand...
Click to collapse
i am always here to help...
and now i am uploading my new ORIGINAL LOLLIPOP ROM CM12.1 ...
and links will be available in two three days...
Could someone provide backup image of spice MI 509. My phone got stuck in a bootloader while changing font.
Is there any method to come out of the problem. Pls reply.
subash.ateet said:
Could someone provide backup image of spice MI 509. My phone got stuck in a bootloader while changing font.
Is there any method to come out of the problem. Pls reply.
Click to expand...
Click to collapse
download the stock rom from xda firmware site and then use flashtool in that zip to install the firmware in your mi509...it will boot... but u will lost your apps installed earlier...
saurabh1234 said:
download the stock rom from xda firmware site and then use flashtool in that zip to install the firmware in your mi509...it will boot... but u will lost your apps installed earlier...
Click to expand...
Click to collapse
Thanks Saurabh1234 for your reply.
How can I use flashtool in my mobile as it is stucking in bootloader? I can access only Recovery mode ( Power + Vol. down). Is there any method to install the firmware by Recovery mode(Power + Vol. down)?
I had already tried the SP flastool to flash my mobile but the software dont access/ read my mobile.
subash.ateet said:
Thanks Saurabh1234 for your reply.
How can I use flashtool in my mobile as it is stucking in bootloader? I can access only Recovery mode ( Power + Vol. down). Is there any method to install the firmware by Recovery mode(Power + Vol. down)?
I had already tried the SP flastool to flash my mobile but the software dont access/ read my mobile.
Click to expand...
Click to collapse
flashtool will work on your pc and laptop...
download firmware and then install drivers given in it in your pc then open your flashtool and load bootloader...
now connect your device to pc via data cable with or without battery ...
then click on download button in flashtool and press vol down on device.
then update will start..
check this link...
http://forum.xda-developers.com/android/general/rooting-cwm-firmware-spice-stellar-mi-t2969920
Trying to port PhilZ 6.59.0
Can you tell me how you ported PhilZ 6.57.9.......coz i'm trying to port PhilZ 6.59.0
micromax canvas xpress 2 e313 official 5.1
xpress 2 e313 oficial lolipop 5.1
NOTE-this firmware is flashable via flashtool only so its for pc users
wait is over guys
official micromax canvas xpress 2 e313 lolipop 5.1 firmware is here
download link is in POST 2
flashing guide is in POST 3
rooing guide n patching guide pos 4
its the ooficial 5.1 firmware of mmx xpress 2 with unlocked bootloder so u can root it can flash custom roms
wait is over
he wait is over guys
due to xda rules m unable to give u the link of mmx canvas xpress 2 5.1 firmware
so copy n paste the url above
DOWNLOAD.. (https://drive.google.com/file/d/0B9tb9NtbHirvMFMtd1ZMczNiRjQ/view?usp=sharing)
m making flashing guide till u all can download this package
dont forget to subscribe nd click thanks if u liked n rate this thread
stay tuned
Instalation guide for xpress 2 5.1
NOTE-files are flashable from sp flash tools so u hv to be on pc
..download the firmware rar file nd xtract it with winrar in ur pc
..after extracting u will get folder (firmware 5.1 mmx e313 unlocked)
..then download mt65xx preloader driver for ur pc with suitable window u hv(google mt65xx preloader driver)
..or else u can use dirvers in the folder (Android CDC Driver) if u know how to install it
..after installing the driver u r ready to flash ur firmware
..now open the folder(SP Flash Tool v5.1516) and open the flash_tool.exe
..now click on scatter-loading nad then a new window will open,in this popup window go to the folder (firmware 5.1 mmx e313 unlocked) and inside the folder u will see the folder firmware and open it n there u will see the file MT6592_Android_scatter.txt
..now select it nd hit enter...
the files will be loaded in flashtool so now click on download nd then remove battry of ur phone and conect it to pc
..if u hv installed acurate drivers then flashing will be start
..after complete u will get green logo with download complete
..remove the usb from phone and insert battry nd hold the power+volume up botons (neccesory step) for 10 seconds
..when phone will power on u will gwt weared logo(due to unlocked bootloader nd after some seconds the recovery will be open
..into the philiz recovery tap on (wipe and format option) and then (factory reset) then yes now its formating ur data n cache (neccesory point to do)
..it will take upto 2 minutes so dont panic...wait for complete and then go back nd reboot ur phone
..again weared logo will apear nd in few seconds micromax logo eill be apear n it will stay about 15 seconds so wait and dont pull out battry...just wait...after this the canvas logo will apear so now ur phone is booting but wait it will still take about 10 minutes to first boot so dont painic nd drink some cold water n wait for boot..finaly after 10 minutes of boot it will show u welcome screen,.
..now configure it as u want, the official 5.1 lolipop is now on ur device
pls click on thanks nd vote nd rate my thread so i can become a recognize mamber of xda
you are great.
Will flashing 5.1 firmware affect my warranty?
Is it official and It is really for E313 and anyone already flashed yet.....................................
---------- Post added at 02:51 PM ---------- Previous post was at 02:50 PM ----------
Is it official and It is really for E313 and anyone already flashed yet .....................................
flashing not started ?
I am using windows 10 and found these drivers in google "Motorola_End_User_Driver_Installation_6.2.0_64bit" ??
But flashing did not start ??
Do i need to root my phone before doing this process ???
Yes...
100% working and battery works superb fine.
[/U]
Imtiaz369 said:
Is it official and It is really for E313 and anyone already flashed yet.....................................
---------- Post added at 02:51 PM ---------- Previous post was at 02:50 PM ----------
Is it official and It is really for E313 and anyone already flashed yet .....................................
Click to expand...
Click to collapse
Screen shots
Hi,
Has anyone tried flashing it...is this ROM working...?? Can u upload some screenshot but thanks for the rom
I flashed it... everything is working fine, except a problem i faced, that is, the ext sdcard is not writable for some apps.. all of the data goes to internal memory, even though the default storage selected from the settings is the ext sd!! Also the error shown in the applications while selecting ext SD is *this storage is not writable*
help me out with this, please...
Cool Prashant said:
Hi,
Has anyone tried flashing it...is this ROM working...?? Can u upload some screenshot but thanks for the rom
Click to expand...
Click to collapse
I have flashed it yesterday and it works well.
But the phone became unrooted and I could not find a way to root it again.
I don't know how to upload screenshots... When I try to insert image xda...asks for the url of the image
---------- Post added at 06:57 AM ---------- Previous post was at 06:54 AM ----------
Prince_Abhay said:
xpress 2 e313 oficial lolipop 5.1
NOTE-this firmware is flashable via flashtool only so its for pc users
wait is over guys
official micromax canvas xpress 2 e313 lolipop 5.1 firmware is here
download link is in POST 2
flashing guide is in POST 3
rooing guide n patching guide pos 4
its the ooficial 5.1 firmware of mmx xpress 2 with unlocked bootloder so u can root it can flash custom roms
Click to expand...
Click to collapse
Thanks for the great work.
I have an issue: After flashing 5.1 my phone became unrooted. Also I could not find a way to root it again. Can you please suggest a way.
smuthuplackal said:
I have flashed it yesterday and it works well.
But the phone became unrooted and I could not find a way to root it again.
I don't know how to upload screenshots... When I try to insert image xda...asks for the url of the image
---------- Post added at 06:57 AM ---------- Previous post was at 06:54 AM ----------
Thanks for the great work.
I have an issue: After flashing 5.1 my phone became unrooted. Also I could not find a way to root it again. Can you please suggest a way.
Click to expand...
Click to collapse
Using recovery, flash supersu.zip v2.46, keeping it in the root of ur ext sd
just google it foe the download
Prince_Abhay said:
xpress 2 e313 oficial lolipop 5.1
NOTE-this firmware is flashable via flashtool only so its for pc users
wait is over guys
official micromax canvas xpress 2 e313 lolipop 5.1 firmware is here
download link is in POST 2
flashing guide is in POST 3
rooing guide n patching guide pos 4
its the ooficial 5.1 firmware of mmx xpress 2 with unlocked bootloder so u can root it can flash custom roms
Click to expand...
Click to collapse
Plz provide rooting method for 5.1 as the zip u have provided doesn't work on 5.1
Cool Prashant said:
Plz provide rooting method for 5.1 as the zip u have provided doesn't work on 5.1
Click to expand...
Click to collapse
rooted my own phone using UPDATE-SuperSU-v2.46.zip file
faizan.s91 said:
I flashed it... everything is working fine, except a problem i faced, that is, the ext sdcard is not writable for some apps.. all of the data goes to internal memory, even though the default storage selected from the settings is the ext sd!! Also the error shown in the applications while selecting ext SD is *this storage is not writable*
help me out with this, please...
Click to expand...
Click to collapse
the sp flash tool is taking lot of time to begin the flashing process. how much time do it take to start the process?
avistein said:
the sp flash tool is taking lot of time to begin the flashing process. how much time do it take to start the process?
Click to expand...
Click to collapse
On my 10yr old pc wid defective USB ports it took atleast 10 mins to start the process aftr properly installing the drivers... Thn actual flashing took around 10 more mins..
Thn comes actual booting of the fone which takes ages.. and i felt for a few mins tht i bricked my fone... but atlast, it finally booted!!
faizan.s91 said:
On my 10yr old pc wid defective USB ports it took atleast 10 mins to start the process aftr properly installing the drivers... Thn actual flashing took around 10 more mins..
Thn comes actual booting of the fone which takes ages.. and i felt for a few mins tht i bricked my fone... but atlast, it finally booted!!
Click to expand...
Click to collapse
yeah flashed it,but i forgot to format the data and cache and now its taking time to show the welcome screen. Did I brick it?
avistein said:
yeah flashed it,but i forgot to format the data and cache and now its taking time to show the welcome screen. Did I brick it?
Click to expand...
Click to collapse
Then remove the battery now, reboot to recovery and complete factory resetting step now.
Everythng works fine except rooting.After roooting and when i open super su ..it shows ...no su binary installed and super su cannot install it..help me please..
Prince_Abhay said:
NOTE-files are flashable from sp flash tools so u hv to be on pc
..download the firmware rar file nd xtract it with winrar in ur pc
..after extracting u will get folder (firmware 5.1 mmx e313 unlocked)
..then download mt65xx preloader driver for ur pc with suitable window u hv(google mt65xx preloader driver)
..or else u can use dirvers in the folder (Android CDC Driver) if u know how to install it
..after installing the driver u r ready to flash ur firmware
..now open the folder(SP Flash Tool v5.1516) and open the flash_tool.exe
..now click on scatter-loading nad then a new window will open,in this popup window go to the folder (firmware 5.1 mmx e313 unlocked) and inside the folder u will see the folder firmware and open it n there u will see the file MT6592_Android_scatter.txt
..now select it nd hit enter...
the files will be loaded in flashtool so now click on download nd then remove battry of ur phone and conect it to pc
..if u hv installed acurate drivers then flashing will be start
..after complete u will get green logo with download complete
..remove the usb from phone and insert battry nd hold the power+volume up botons (neccesory step) for 10 seconds
..when phone will power on u will gwt weared logo(due to unlocked bootloader nd after some seconds the recovery will be open
..into the philiz recovery tap on (wipe and format option) and then (factory reset) then yes now its formating ur data n cache (neccesory point to do)
..it will take upto 2 minutes so dont panic...wait for complete and then go back nd reboot ur phone
..again weared logo will apear nd in few seconds micromax logo eill be apear n it will stay about 15 seconds so wait and dont pull out battry...just wait...after this the canvas logo will apear so now ur phone is booting but wait it will still take about 10 minutes to first boot so dont painic nd drink some cold water n wait for boot..finaly after 10 minutes of boot it will show u welcome screen,.
..now configure it as u want, the official 5.1 lolipop is now on ur device
pls click on thanks nd vote nd rate my thread so i can become a recognize mamber of xda
Click to expand...
Click to collapse
Flashing was successful. It works well. But my phone became unrooted. Please suggest a way to root the phone after flashing 5.1.