Database Info

Invalid IMEI, Unknown Baseband MT6589

I was using CWM 6.0.1.5, then i have decided to switch to TWRP, some idiot posted wrong recovery.img of TWRP 2.5.0.0
I have installed the TWRP recovery using my PC, and then when the phone rebooted I lost my dual sim networks.
getting Invalid IMEI for both the SIM's, Unknown baseband.
SIM's are only working with STOCK ROM, If i try to flash any other custom ROM SIM's are not working.
I am now using twrp recovery. It works but only with stock ROM. If I port any other custom ROM getting invalid imei and unknown baseband
I am working on stock ROM, As soon as I switch to another custom ROM i loose IMEI and BaseBand...
Please help.

Similar
I am having the same problem and even more , my phone is not detecting the sims and showing baseband unknown and invalid imei on the stock rom ROM as well . Did you find any solution .

Mansuur said:
I am having the same problem and even more , my phone is not detecting the sims and showing baseband unknown and invalid imei on the stock rom ROM as well . Did you find any solution .
Click to expand...
Click to collapse
Yes - Found the solution and it worked 100% for me without a single hiccup.

itechengine said:
Yes - Found the solution and it worked 100% for me without a single hiccup.
Click to expand...
Click to collapse
could u please tell me how u did that??

up

shrikant716 said:
could u please tell me how u did that??
Click to expand...
Click to collapse
Please follow the instructions carefully....
MOD edit: links removed - contained malware
NOTE:-I AM NOT RESPONSIBLE FOR ANY DAMAGE IF U HAVE NOT FOLLOWED THE TUTORIAL PROPERLY!!!!

itechengine said:
Please follow the instructions carefully....
NOTE:-I AM NOT RESPONSIBLE FOR ANY DAMAGE IF U HAVE NOT FOLLOWED THE TUTORIAL PROPERLY!!!!
Click to expand...
Click to collapse
fixed the problem without the link....thanq....
Sent from my iris458Q using xda app-developers app

[SOLVED] same error
The same error when installing TWRP,
Here I explain how I solved:
http://forum.xda-developers.com/showthread.php?t=2460232
Greetings

[Q&A] Twrp recovery

Q&A for Twrp recovery
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Twrp recovery. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

hi avi,
i am using q3k out of the box kk
installed twrp 2.7 via flashify
then tried kk based lg rom successfully booted and tried gidgat rom this is also successfully booted both are working with root also
and then tried jb based roms xtreme and pure xperia this is also successfully booted and working with root perfectly

vijay jay said:
hi avi,
i am using q3k out of the box kk
installed twrp 2.7 via flashify
then tried kk based lg rom successfully booted and tried gidgat rom this is also successfully booted both are working with root also
and then tried jb based roms xtreme and pure xperia this is also successfully booted and working with root perfectly
Click to expand...
Click to collapse
Please see if backup restore works.
flash kk rom
take backup in recovery
flash jb rom
take backup
now restore kk rom
see if it works
restore jb rom
see if it works:good:

hi avi,
tried backup and restoring roms between jb and kk everything working perfectly without any issues :good:

vijay jay said:
hi avi,
tried backup and restoring roms between jb and kk everything working perfectly without any issues :good:
Click to expand...
Click to collapse
Thanks for trying bro.:good::good:
U said ur phone came with kitkat out of the box.
when u flashed a JB rom did ur camera worked as normal??

avi3230 said:
Thanks for trying bro.:good::good:
U said ur phone came with kitkat out of the box.
when u flashed a JB rom did ur camera worked as normal??
Click to expand...
Click to collapse
no not working in every jb rom even flashed ur jb uboot still camera not working

vijay jay said:
no not working in every jb rom even flashed ur jb uboot still camera not working
Click to expand...
Click to collapse
Ohhh Ok
Have u tried this method.
U need to flash the KK with sp tools first.
I need confirmation for it as no one has tired it yet.

avi3230 said:
Ohhh Ok
Have u tried this method.
U need to flash the KK with sp tools first.
I need confirmation for it as no one has tired it yet.
Click to expand...
Click to collapse
yes tried everything using that method even tried to took backup of kk stock camera using titanium then restored in jb rom still camera is not working

vijay jay said:
yes tried everything using that method even tried to took backup of kk stock camera using titanium then restored in jb rom still camera is not working
Click to expand...
Click to collapse
Have u installed whole kk s007 version with sp tools??
If yes then there must be some change in kk out of the box phones.

avi3230 said:
Have u installed whole kk s007 version with sp tools??
If yes then there must be some change in kk out of the box phones.
Click to expand...
Click to collapse
yes installed with sp tools still camera not working
my phone also came with same version (Kk S007-27052014)

vijay jay said:
yes installed with sp tools still camera not working
my phone also came with same version (Kk S007-27052014)
Click to expand...
Click to collapse
Have u tried format+download option in spflash tools

avi3230 said:
Have u tried format+download option in spflash tools
Click to expand...
Click to collapse
not yet tried will u plz explain little bit about this

vijay jay said:
not yet tried will u plz explain little bit about this
Click to expand...
Click to collapse
if u use SP_Flash_Tool_v3.1344.0.212 then try firmware upgrade option.
if u use SP_Flash_Tool_v5.1420.03 see attachment.

Flashed TWRP 2.7 recovery using sptools successfully..
But can't able to flash any stock ROM and failed to flash kk based hive ui ROM..

Unable to install recovery
Hi Avi,
I'm using Win 8 system, I installed the VCOM driver overriding the digital signature and established the Mediatek VCOM DA USB port.
Now when i'm trying to install recovery using SP tools, it downloads 100% and then gives error stating, "pmt changed for rom it must be downloaded".
Any advise on this?

7Hrishikesh said:
Hi Avi,
I'm using Win 8 system, I installed the VCOM driver overriding the digital signature and established the Mediatek VCOM DA USB port.
Now when i'm trying to install recovery using SP tools, it downloads 100% and then gives error stating, "pmt changed for rom it must be downloaded".
Any advise on this?
Click to expand...
Click to collapse
Please download philz recovery file from here (any will do)
Just use the scatter file inside it
tick only on recovery
click on it
select twrp recovery when asked
press download:good:

avi3230 said:
Please download philz recovery file from here (any will do)
Just use the scatter file inside it
tick only on recovery
click on it
select twrp recovery when asked
press download:good:
Click to expand...
Click to collapse
Not working, still the same error. I tried on Windows XP as well as on Windows 7 system.
P.S - "click on it & select twrp recovery when asked" i dont get this option
Appreciate your efforts. Like i said earlier you're "GOD OF Q3000!!!!!!!!"

7Hrishikesh said:
Not working, still the same error. I tried on Windows XP as well as on Windows 7 system.
P.S - "click on it & select twrp recovery when asked" i dont get this option
Appreciate your efforts. Like i said earlier you're "GOD OF Q3000!!!!!!!!"
Click to expand...
Click to collapse
Thanks but i am no GOD of Q3000
I am just a user like everyone here
now when u select the scatter file from philz
u will get this
now just untick uboot and boot
click on recovery name itself
u will get file browser and like this
finally when u flashing this is the screen
now press download button:good::good:

Thanks
Thanks a lot Avi Sir, All my problems has been sorted out. Thanks again. BTW, I'll bother you again if i stuck anywhere.

Recovery Error!!!
Sir,
I tried the method as described but landed with attached error. Not sure what's wrong.
I'm currently having CWM 6.0.2.8 Recovery by Bruno Martins....
Please advise.

help!! q3000 sp tools "Enable DRAM FAILED"

Maybe formatted phone or by installing kitkat for q3000.. it's like hard brick .. please someone help ..:crying::crying::crying:

AAAni said:
Maybe formatted phone or by installing kitkat for q3000.. it's like hard brick .. please someone help ..:crying::crying::crying:
Click to expand...
Click to collapse
is it booting and can u go in recovery mode...

AAAni said:
Maybe formatted phone or by installing kitkat for q3000.. it's like hard brick .. please someone help ..:crying::crying::crying:
Click to expand...
Click to collapse
Simply downgrade to Jelly bean!

Hi guys plz help me to solve this problem : Error 4032 (Enable DRAM FAILED) when trying to flash
not booting.. not even showing charging.. sp tool says
Error 4032 (Enable DRAM FAILED).. no recovery.. :crying:

AAAni said:
Hi guys plz help me to solve this problem : Error 4032 (Enable DRAM FAILED) when trying to flash
Click to expand...
Click to collapse
Uninstall drivers from pc and reinstall them correctly, then flash it again.
Sent from my XOLO Q3000

not helping..:crying:

AAAni said:
not helping..:crying:
Click to expand...
Click to collapse
U need to flash whole stock rom either Jelly bean or kitkat as u like.
Xolo Q3000 KK S007 27-05-2014.zip
q3000 stock jb 4.2 s011.7z
download one of above as per ur chioce.
extract it in folder.
download sp flash tools.
Extract it in a folder.
Start sptools.exe
choose scatter loading.
select scatter file from above downloaded firmware folder.
select firmware upgrade.
press download
connect ur mobile in switch off condition.
wait till green circle appears.
Start u mobile.
U need drivers installed before the procedure.

tried every sp tool version ..:crying:
tried many rom ..:crying:
even official roms from needrom.com and androidxda.com
and also the link you've given..(Xolo Q3000 KK S007 27-05-2014.zip & q3000 stock jb 4.2 s011.7z ):crying:
but same error :crying:
BROOM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM failed!
[HINT]:
please check your load matches to your target which is to be downloaded
please someone help me out..:crying:

AAAni said:
tried every sp tool version ..:crying:
tried many rom ..:crying:
even official roms from needrom.com and androidxda.com
and also the link you've given..(Xolo Q3000 KK S007 27-05-2014.zip & q3000 stock jb 4.2 s011.7z ):crying:
but same error :crying:
BROOM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM failed!
[HINT]:
please check your load matches to your target which is to be downloaded
please someone help me out..:crying:
Click to expand...
Click to collapse
Just explain each step u doing from the very beginning?
Have u selected firmware upgrade option??
Also post some screenshots

My phone was dead after I formatted with option of "format all + download " in sp tool:crying:
was using "PXZ2-4.3.5-q3000 working" and tried to flash "Xolo Q3000 KK S007 27-05-2014" but i think the process was not successful :crying: and now my phone behave like hard brick but it still recognize by pc without battery but usb port disappear frequently ..
I found 1 solution .. can any one upload backup rom of q3000 using "MTK droid tools" please please please .. http://forum.xda-developers.com/showthread.php?t=2447431&page=5 avi3230 bro ... can you make attachment like in this link of preloder and scatter file for q3ooo?

AAAni said:
My phone was dead after I formatted with option of "format all + download " in sp tool:crying:
was using "PXZ2-4.3.5-q3000 working" and tried to flash "Xolo Q3000 KK S007 27-05-2014" but i think the process was not successful :crying: and now my phone behave like hard brick but it still recognize by pc without battery but usb port disappear frequently ..
I found 1 solution .. can any one upload backup rom of q3000 using "MTK droid tools" please please please .. http://forum.xda-developers.com/showthread.php?t=2447431&page=5 avi3230 bro ... can you make attachment like in this link of preloder and scatter file for q3ooo?
Click to expand...
Click to collapse
Just flash the "Xolo Q3000 KK S007 27-05-2014" firmware as normal, everything will be fine.
Just select firmware upgrade option.
These files are all base files including preloader and scatter ok.
Ur error is cause u formatted preloader , just restore preloader ur phone will boot. :good::good:
If still u cant do it, just PM me.

see this.. error remain same :crying::crying::crying:

Lets start from the base,
Which version of windows r u using & did u hv admin rights?
Sent from my XOLO Q3000 using XDA Free mobile app

tired windows 8.1 32bit & 64 bit, windows 7 32bit with administrative right

In windows 7, install 32 bit drivers, download so flash tool from mtk's official site and flash stock job if ur phone u received with jb ROM else flash kk rom. Flash phone without battery, sim n memory card. Also before flashing, connect our phone with battery inserted and power on. Look whether driver is installed. Drivers to install: mobistel cynus, vcom, pdanet and adb drivers.
Sent from my Q3000 using XDA Free mobile app

its better to take it xolo care..they might charge u but atleast u will get ur phone back...

Same thing happend to me ...
:crying: :crying: After doing a "whole flash format " ... I am able to flash (XOLO Q3000) STOCK ROMS successfully ... But when i start my phone it gets STUCK on BOOTLOOP .... it not charging too..... PLZ HELP ME GUYZ ... wats going wrong here ??? :crying::crying:
---------- Post added at 12:40 PM ---------- Previous post was at 12:35 PM ----------
davis.arkel said:
:crying: :crying: After doing a "whole flash format " ... I am able to flash (XOLO Q3000) STOCK ROMS successfully ... But when i start my phone it gets STUCK on BOOTLOOP .... it not charging too..... PLZ HELP ME GUYZ ... wats going wrong here ??? :crying::crying:
Click to expand...
Click to collapse
and its not entering CUSTOM RECOVERY MODE ALSO (after flashing custom recovery ).. PLZ PLZ PLZ HELP GUYZ ...

davis.arkel said:
:crying: :crying: After doing a "whole flash format " ... I am able to flash (XOLO Q3000) STOCK ROMS successfully ... But when i start my phone it gets STUCK on BOOTLOOP .... it not charging too..... PLZ HELP ME GUYZ ... wats going wrong here ??? :crying::crying:
---------- Post added at 12:40 PM ---------- Previous post was at 12:35 PM ----------
and its not entering CUSTOM RECOVERY MODE ALSO (after flashing custom recovery ).. PLZ PLZ PLZ HELP GUYZ ...
Click to expand...
Click to collapse
Please explain the procedure u followed mentioning the stock rom links.

avi3230 said:
Please explain the procedure u followed mentioning the stock rom links.
Click to expand...
Click to collapse
Well, i was using HNY 15 series ROM(rooted)... and My battery was a bit low .... and the rom had fair number of ISSUES and BUGS ... so i booted into recovery mode and tried to instal a backup to RESTORE the stock version of android, I was using before .... it failed to complete that and got bricked .....
Every tym i started the phone it got stuck in boot loop .... I tried to flash the stock rom (2 -3 times) ( which i flashed before and was using it )...
BUT NO LUCK ... it did the same bootloop thing ...I tried to enter custom recovery (after flashing philz recovery immediately after flashing the rom )...it worrked 2-3 times but after then, no luck , i wasn't able to boot into recovery also ...
SO I got fed-up and made A "WHOLE FORMAT FLASH" (using sp flash tools) ....
After that my device was detected as UNKNOWN DEVICE ... then i searched the forums and was able to install drivers FOR WINDOWS 8......
and i was able to flash again .... later i tried the rom " XOLO Q3000 KK S007 27-05-2014" and stock rom from some website (the one which i was using before)
and one more "XOLO Q3000 S003 15102013" both the first and last roms were given by (xda xolo q3000 member .... i dont remember his name .. but i guess you know him)
1 out of 5 times i am able to get into recovery mode (after flashing custom recovery ) ..... once in CR mode I tried to format INTERNAL SD and it showed " "ERROR : unable to format internal storage "
AND i did a memory test also and everything was good except ERROR: NAND FLASH NOT FOUND .....
.. THANKS IN ADVANCD .... PLz Help

davis.arkel said:
Well, i was using HNY 15 series ROM(rooted)... and My battery was a bit low .... and the rom had fair number of ISSUES and BUGS ... ........
Click to expand...
Click to collapse
follow this link.
use sptools.
if u use version 3 use firmware upgrrade option.
if u use version 5 use fomat+dowload option.

Micromax Unite A092 Custom ROM [Cyanogen Mod 11]

CyanogenMod 11 for Micromax A092
Ported by darshan1205 (Darshan Manjrekar)
Bugs Known
2.99 GB partition not detected
Move to SD not available
Flash KitKat Firmware via fast boot to prevent FCS
Hit Thanks:good:
Link:https://www.4shared.com/zip/LBaTW5Lice/CM11-20150512-UNOFFICIAL-UNITE.html

Screen shots

System UI Crashes
when i installed it worked fine for a little bit of time but after that it says system ui has stopped working and if i open security settings it says settings has stopped working

prajwal2001 said:
when i installed it worked fine for a little bit of time but after that it says system ui has stopped working and if i open security settings it says settings has stopped working
Click to expand...
Click to collapse
Flash Kitkat Firmware then flash this ROM ...
Sent from my YU5510 using Tapatalk

darshan1205 said:
Flash Kitkat Firmware then flash this ROM ...
Sent from my YU5510 using Tapatalk
Click to expand...
Click to collapse
Where can I get kitkat firmware (first time installing a ROM )

prajwal2001 said:
Where can I get kitkat firmware (first time installing a ROM )
Click to expand...
Click to collapse
Download this KitKat Firmware of Moto A310 [a rebrand of Micromax A092] & flash it through fastboot
Link: https://drive.google.com/file/d/0B6oh79olFl8jSWk0dTRQcUJKYkE/view?usp=drivesdk
Sent from my YU5510 using Tapatalk

darshan1205 said:
Download this KitKat Firmware of Moto A310 [a rebrand of Micromax A092] & flash it through fastboot
Sent from my YU5510 using Tapatalk
Click to expand...
Click to collapse
Ok I fastbooted and installed kitkat firmware now i just have to install the rom right
---------- Post added at 08:26 AM ---------- Previous post was at 07:48 AM ----------
It Worked Thanks Alot!!!! Bhai:good

The ROM is working smoothly but the viberations for keyboard home and back button are not working

please help,
I flashed my phone by vroot. now Imei is showing null. no internal sd card is detected in phone but while attaching it with computer it shows.2.99 Gb available.
how to recover all those things again if i had not made any recovery for it
while updating in recovery mode everytime it shows verification failed installed aborted so updated version are not installing.
Plz Plz Plz help

pradeepkurmi said:
please help,
I flashed my phone by vroot. now Imei is showing null. no internal sd card is detected in phone but while attaching it with computer it shows.2.99 Gb available.
how to recover all those things again if i had not made any recovery for it
while updating in recovery mode everytime it shows verification failed installed aborted so updated version are not installing.
Plz Plz Plz help
Click to expand...
Click to collapse
First download the KitKat firmware from this link https://drive.google.com/file/d/0B6oh79olFl8jSWk0dTRQcUJKYkE/view?usp=drivesdk then extract it using winrar and open the folder fastboot download in it and double click on 8x10_fastboot_all_images and turn off your phone and then press and hold power button+volume down when you see the micromax logo connect it to your computer with usb and it flash kitkat on it then flash the cm11 rom via recovery

Please can you contact me via email. My email id is [email protected]
and my whastapp no. is 9699961332

I know how to flash Via recovery. Open Recovery Mode and select install from Sd card then select any update.zip but i dont know how to flash kitkat on it. Plz Help. Also i cannot find cm11 rom in this zip.

got it i had installed custom rom via fastboot but now wifi is not working

This link is not working please repair it or provide a new one

i done flash of your rom then i cant open my sequrity setting i.e, it was showing me "unfortunately, setting has been stopped"... Then i saw yr firmware that is something stuff fix kk.. i dont it same.. it all finished successful. the real part is now i cant open my recovery screen else the boot screen is in loop.. so give me some idea stuff which repair this thing. HELP!! And if im pressing volume with power.. it again and again restart please help: Anyways thanks brother.. now its Fine .. Thanks a ton.. can u uploads more updated rom like marshmallow??

link not working
on clicking the download option it displays invalid signature. please update the link

My phone gets stuck at boot image nothing happens in both phone and PC......
It shows waiting for device in PC and mmx liogo in phone forever

[Q&A] PHILZ RECOVERY for SPICE MI509

Q&A for PHILZ RECOVERY for SPICE MI509
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for PHILZ RECOVERY for SPICE MI509. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Not working...
Hi "Saurabh" i tried this procedure my Spice MI509 is showing Spice logo "S" and restarting continuously please help me out.

epsan said:
Hi "Saurabh" i tried this procedure my Spice MI509 is showing Spice logo "S" and restarting continuously please help me out.
Click to expand...
Click to collapse
How u flashing this recovery...???
Use mobile uncle tool...
It needs root and then place the recovery in sdcard after renaming It to recovery.img and then open Mobil uncle tool and select install recovery from sdcard and then select the recovery file...
Wait some time and your recovery will work now...
And I want to know that on which android version u r?? Kitkat or jelly bean???

saurabh1234 said:
How u flashing this recovery...???
Use mobile uncle tool...
It needs root and then place the recovery in sdcard after renaming It to recovery.img and then open Mobil uncle tool and select install recovery from sdcard and then select the recovery file...
Wait some time and your recovery will work now...
And I want to know that on which android version u r?? Kitkat or jelly bean???
Click to expand...
Click to collapse
Hey Thanks for reply, i resolved that issue by trying to turn on the phone by usb power, phone boots up normally but without any signal both sims are properly inserted but no signal (may be IMEI issue) how to resolve it???. ( procedure i followed for previous attempt, i am currently on JellyBean my stock android version(people say Mi509 come with KITKAT out of box but its not in case of my phone. i followed your procedure as it is, downloaded attachment and MobileUncle apk installed that apk , opened that uncle and selected recovery update and it automatically restarted.)

now i know that my standard Android Recovery was OVERWRITTEN by custom recovery and i DIDNT backup my stock recovery . what should i do. ( i read something about EFS partition which contains IMEI info which was corrupted by custom recovery i believe ). and also please send me backup of recovery partition (or EFS) to me @ [email protected] i will set my own IMEI nos using Enginering Mode apk . this is my only phone please help me

epsan said:
now i know that my standard Android Recovery was OVERWRITTEN by custom recovery and i DIDNT backup my stock recovery . what should i do. ( i read something about EFS partition which contains IMEI info which was corrupted by custom recovery i believe ). and also please send me backup of recovery partition (or EFS) to me @ [email protected] i will set my own IMEI nos using Enginering Mode apk . this is my only phone please help me
Click to expand...
Click to collapse
thats why i was asking about android version....
bcoz all roms and recovery available for MI509 uses KITKAT kernel and you flashed it on Jellybean...
here i attach the stock recovery of jellybean....
for fixing IMEI use this link.........
This will fix it permanently...
IMEI TOOL with video tutorial....https://docs.google.com/uc?id=0B5DM6ZSz3dh-eTQzV2VWck1Kckk&export=download
Database- http://www.mediafire.com/download/no1oo8rroq4uqtr/Database.rar
use database file from second link bcoz this database is for spice mi509....
and next time dont flash rom if you have jellybean

Hey "Sourabh" did i "bricked" my phone???? and how to overcome that please.............
---------- Post added at 02:44 PM ---------- Previous post was at 02:03 PM ----------
Again Thanks for the reply, i just came to know that..... i should back up efs directory thank you very much for your support, i will let you know the status once i finish all the countermeasures.

epsan said:
Hey "Sourabh" did i "bricked" my phone???? and how to overcome that please.............
---------- Post added at 02:44 PM ---------- Previous post was at 02:03 PM ----------
Again Thanks for the reply, i just came to know that..... i should back up efs directory thank you very much for your support, i will let you know the status once i finish all the countermeasures.
Click to expand...
Click to collapse
If your device I bricked then just flash stock firmware using sp flash tool...if you don't know how to ...
Then give it to service centre but don't tell them about rooting and flashing custom rom...
Bcoz if you tell them then they will cost you money...

saurabh1234 said:
If your device I bricked then just flash stock firmware using sp flash tool...if you don't know how to ...
Then give it to service centre but don't tell them about rooting and flashing custom rom...
Bcoz if you tell them then they will cost you money...
Click to expand...
Click to collapse
Hey "Saurabh" you didddit. i tried using SPFTool and its working i was able to get my imei nos also(but it took me two days to figure it out). NOW how do i upgrade my mobile to KITKAT do you have that rom. can you please send me that link(stock rom).

epsan said:
Hey "Saurabh" you didddit. i tried using SPFTool and its working i was able to get my imei nos also(but it took me two days to figure it out). NOW how do i upgrade my mobile to KITKAT do you have that rom. can you please send me that link(stock rom).
Click to expand...
Click to collapse
Above was mistyping I was writing 'is' but leaved at 'i'. But thats no problem.
Below is stock kitkat firmware....flash through spflashtool...
https://docs.google.com/uc?id=0B1F4thoxIkjEb3pMT0N1UEhmQ00
When flashing firmware is done then root your mobile and install the philz recovery using flashify or mobile uncle tool to install custom rom...

saurabh1234 said:
Above was mistyping I was writing 'is' but leaved at 'i'. But thats no problem.
Below is stock kitkat firmware....flash through spflashtool...
https://docs.google.com/uc?id=0B1F4thoxIkjEb3pMT0N1UEhmQ00
When flashing firmware is done then root your mobile and install the philz recovery using flashify or mobile uncle tool to install custom rom...
Click to expand...
Click to collapse
Thank you very much "Saurabh" it really worked and i am running stock KITKAT now and will change it to custom rom very soon... again Thank you very much :good:

epsan said:
Thank you very much "Saurabh" it really worked and i am running stock KITKAT now and will change it to custom rom very soon... again Thank you very much :good:
Click to expand...
Click to collapse
i am always here to help...
and now i am uploading my new ORIGINAL LOLLIPOP ROM CM12.1 ...
and links will be available in two three days...

Could someone provide backup image of spice MI 509. My phone got stuck in a bootloader while changing font.
Is there any method to come out of the problem. Pls reply.

subash.ateet said:
Could someone provide backup image of spice MI 509. My phone got stuck in a bootloader while changing font.
Is there any method to come out of the problem. Pls reply.
Click to expand...
Click to collapse
download the stock rom from xda firmware site and then use flashtool in that zip to install the firmware in your mi509...it will boot... but u will lost your apps installed earlier...

saurabh1234 said:
download the stock rom from xda firmware site and then use flashtool in that zip to install the firmware in your mi509...it will boot... but u will lost your apps installed earlier...
Click to expand...
Click to collapse
Thanks Saurabh1234 for your reply.
How can I use flashtool in my mobile as it is stucking in bootloader? I can access only Recovery mode ( Power + Vol. down). Is there any method to install the firmware by Recovery mode(Power + Vol. down)?
I had already tried the SP flastool to flash my mobile but the software dont access/ read my mobile.

subash.ateet said:
Thanks Saurabh1234 for your reply.
How can I use flashtool in my mobile as it is stucking in bootloader? I can access only Recovery mode ( Power + Vol. down). Is there any method to install the firmware by Recovery mode(Power + Vol. down)?
I had already tried the SP flastool to flash my mobile but the software dont access/ read my mobile.
Click to expand...
Click to collapse
flashtool will work on your pc and laptop...
download firmware and then install drivers given in it in your pc then open your flashtool and load bootloader...
now connect your device to pc via data cable with or without battery ...
then click on download button in flashtool and press vol down on device.
then update will start..
check this link...
http://forum.xda-developers.com/android/general/rooting-cwm-firmware-spice-stellar-mi-t2969920

Trying to port PhilZ 6.59.0
Can you tell me how you ported PhilZ 6.57.9.......coz i'm trying to port PhilZ 6.59.0