Q&A for Twrp recovery
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Twrp recovery. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
hi avi,
i am using q3k out of the box kk
installed twrp 2.7 via flashify
then tried kk based lg rom successfully booted and tried gidgat rom this is also successfully booted both are working with root also
and then tried jb based roms xtreme and pure xperia this is also successfully booted and working with root perfectly
vijay jay said:
hi avi,
i am using q3k out of the box kk
installed twrp 2.7 via flashify
then tried kk based lg rom successfully booted and tried gidgat rom this is also successfully booted both are working with root also
and then tried jb based roms xtreme and pure xperia this is also successfully booted and working with root perfectly
Click to expand...
Click to collapse
Please see if backup restore works.
flash kk rom
take backup in recovery
flash jb rom
take backup
now restore kk rom
see if it works
restore jb rom
see if it works:good:
hi avi,
tried backup and restoring roms between jb and kk everything working perfectly without any issues :good:
vijay jay said:
hi avi,
tried backup and restoring roms between jb and kk everything working perfectly without any issues :good:
Click to expand...
Click to collapse
Thanks for trying bro.:good::good:
U said ur phone came with kitkat out of the box.
when u flashed a JB rom did ur camera worked as normal??
avi3230 said:
Thanks for trying bro.:good::good:
U said ur phone came with kitkat out of the box.
when u flashed a JB rom did ur camera worked as normal??
Click to expand...
Click to collapse
no not working in every jb rom even flashed ur jb uboot still camera not working
vijay jay said:
no not working in every jb rom even flashed ur jb uboot still camera not working
Click to expand...
Click to collapse
Ohhh Ok
Have u tried this method.
U need to flash the KK with sp tools first.
I need confirmation for it as no one has tired it yet.
avi3230 said:
Ohhh Ok
Have u tried this method.
U need to flash the KK with sp tools first.
I need confirmation for it as no one has tired it yet.
Click to expand...
Click to collapse
yes tried everything using that method even tried to took backup of kk stock camera using titanium then restored in jb rom still camera is not working
vijay jay said:
yes tried everything using that method even tried to took backup of kk stock camera using titanium then restored in jb rom still camera is not working
Click to expand...
Click to collapse
Have u installed whole kk s007 version with sp tools??
If yes then there must be some change in kk out of the box phones.
avi3230 said:
Have u installed whole kk s007 version with sp tools??
If yes then there must be some change in kk out of the box phones.
Click to expand...
Click to collapse
yes installed with sp tools still camera not working
my phone also came with same version (Kk S007-27052014)
vijay jay said:
yes installed with sp tools still camera not working
my phone also came with same version (Kk S007-27052014)
Click to expand...
Click to collapse
Have u tried format+download option in spflash tools
avi3230 said:
Have u tried format+download option in spflash tools
Click to expand...
Click to collapse
not yet tried will u plz explain little bit about this
vijay jay said:
not yet tried will u plz explain little bit about this
Click to expand...
Click to collapse
if u use SP_Flash_Tool_v3.1344.0.212 then try firmware upgrade option.
if u use SP_Flash_Tool_v5.1420.03 see attachment.
Flashed TWRP 2.7 recovery using sptools successfully..
But can't able to flash any stock ROM and failed to flash kk based hive ui ROM..
Unable to install recovery
Hi Avi,
I'm using Win 8 system, I installed the VCOM driver overriding the digital signature and established the Mediatek VCOM DA USB port.
Now when i'm trying to install recovery using SP tools, it downloads 100% and then gives error stating, "pmt changed for rom it must be downloaded".
Any advise on this?
7Hrishikesh said:
Hi Avi,
I'm using Win 8 system, I installed the VCOM driver overriding the digital signature and established the Mediatek VCOM DA USB port.
Now when i'm trying to install recovery using SP tools, it downloads 100% and then gives error stating, "pmt changed for rom it must be downloaded".
Any advise on this?
Click to expand...
Click to collapse
Please download philz recovery file from here (any will do)
Just use the scatter file inside it
tick only on recovery
click on it
select twrp recovery when asked
press download:good:
avi3230 said:
Please download philz recovery file from here (any will do)
Just use the scatter file inside it
tick only on recovery
click on it
select twrp recovery when asked
press download:good:
Click to expand...
Click to collapse
Not working, still the same error. I tried on Windows XP as well as on Windows 7 system.
P.S - "click on it & select twrp recovery when asked" i dont get this option
Appreciate your efforts. Like i said earlier you're "GOD OF Q3000!!!!!!!!"
7Hrishikesh said:
Not working, still the same error. I tried on Windows XP as well as on Windows 7 system.
P.S - "click on it & select twrp recovery when asked" i dont get this option
Appreciate your efforts. Like i said earlier you're "GOD OF Q3000!!!!!!!!"
Click to expand...
Click to collapse
Thanks but i am no GOD of Q3000
I am just a user like everyone here
now when u select the scatter file from philz
u will get this
now just untick uboot and boot
click on recovery name itself
u will get file browser and like this
finally when u flashing this is the screen
now press download button:good::good:
Thanks
Thanks a lot Avi Sir, All my problems has been sorted out. Thanks again. BTW, I'll bother you again if i stuck anywhere.
Recovery Error!!!
Sir,
I tried the method as described but landed with attached error. Not sure what's wrong.
I'm currently having CWM 6.0.2.8 Recovery by Bruno Martins....
Please advise.
Related
Presenting CWM Recovery v5
Hi Friends, Here is the download link...
CLICK HERE (Eclair 2.1) with 2.6.29 Kernel
MD5 checksum 37d712d4b8fb3856cd68ffd7147ac9d7
Click to expand...
Click to collapse
Please test this recovery for new A60 devices purchased in 2012
Click here to downlaod New (25th April)
Follow the below procedure to install.
Click to expand...
Click to collapse
How to install... Better instructions here for novice..
1. Install the recovery .img
2. Use "Recovery Manager" apk to install this recovery...
3. on your sdcard there will be a folder "recoveryy" (note 'yy'), place this recover image in that folder.
4. Install from "recovery manager".
Alternative...
You can use "Android downloader" tool to directly flash the recovery...
Purpose of this recovery...... I can see only few... To clarify others doubt...
1. We can utilize latest format of updater/update scripts... while flashing....
2. It does backup of sd-ext also.. not sure if u hv observed for v2.5 or not...
3. Better and faster....
4. Most important... A recovery have nothing to do with any ROM... so it's 2.1 or 2.2 or 2.3... Its sole purpose is to backup the partition
Click to expand...
Click to collapse
Clicking Thanks is the best way to appreciate the work...
Hope I'll get enough thanks this time..
CwM Recovery v5 for Froyo 2.2.1
Here is the link for A60 Froyo 2.2.1 users.....
CLICK HERE (Froyo 2.2.1) with 2.6.32 Kernel STILL WAITING FOR CLARO TESTERS... LINK IS FALSE NOW
Click to expand...
Click to collapse
Installation Procedure remains same as mentioned above.....
CLARO USERS RECOVERY IS UNDER TEST.. NEED MORE TESTER FOR CLARO
Click to expand...
Click to collapse
Cheers.... Njoy.... & Thank....
For those who are using the recovery for first time
1. Root ur phone. check here
2. install busybox from market.
3. Install "recovery manager".. check there is a "recoveryy" folder on ur sd card is created.
4. Download the latest recovery or the v2.5 recovery.. links on my signature..
5. place the downloaded recovery in "recoveryy" folder and flash it via recovery manager..
For those recovery 5 isn't work.. try v2.5 recovery first..
Follow the instruction carefully...
A better way of doing this on the way.. stay tuned...
ngage_me said:
Planned to post for eclair, froyo..
and also for claro users....
Click to expand...
Click to collapse
It was long time awaiting development from your side..Good work again, keep going.........
????
ngage_me, this recovery will enable us to run gingerbread on our fones or something else, thanks for the development, I have already clicked the thanks button.
ngage_me said:
Presenting CWM Recovery v5
Download link will be provided soon.
Waiting for download link......
It's almost ready and I am just testing it to make sure I don't get bombarded with problems...
Hope I'll get enough thanks this time..
Click to expand...
Click to collapse
link ?
dude when are you going to post the link ? and i have clicked on thanks !
ngage_me said:
Presenting CWM Recovery v5
Download link will be provided soon.
Waiting for download link......
It's almost ready and I am just testing it to make sure I don't get bombarded with problems...
Hope I'll get enough thanks this time..
Click to expand...
Click to collapse
bro where is the link bro i am the most happiest man if this recovery works perfect in our a60 really thanks a lot bro
Sorry for d delay friends......
I did tested things.. nd all work fine.. jst usb toggle isn't work this time again..
it's detecting my sd-ext partition too... since i don't hv anything on sd-ext not sure if it will take backup.. for first few test it hvn't created any backup...
so just wanted to double sure before i post here.. that you guys don't loose ur valuable data of sd-ext..
so please b patient...
I'll upload it tonight......
@ngage_me-yes you did that again by making a new recovery as u made earlier, just one bug as you said in the mount corner except everything is fine........
confirmed successful flashing with android download tool on micromax a60.
thanks,I successfully flashed cwm recovery v5.0.2.8 using recovery manager.apk
Sent from my HTC Explorer A310e
@ngage_me
Awesome work!!!
Built from source??
Btw can I get recovery.fstab of this??
Sent from my Micromax_A70 using Tapatalk 2 Beta-4
Stuck at Micromax Screen
I installed the recovery from Recovery Manager App.
Now I get stuck at the Micromax Boot Screen whenever I try to enter recovery.
Any solution?
awesome
bro really awesome bro downloading will reply in a while i already cliked thanks yesterday itself anyway thanks a lot bro
---------- Post added at 04:49 PM ---------- Previous post was at 04:31 PM ----------
bro your recovery is great can u please post me the backup.img files of the 2.1 eclair rom bro please i need them to flash it from the android download tool please help me bro
@nagae_me--please help me bro
rohan.sankhe said:
I installed the recovery from Recovery Manager App.
Now I get stuck at the Micromax Boot Screen whenever I try to enter recovery.
Any solution?
Click to expand...
Click to collapse
@ngage_me Yours Eclair recovery is working but Froyo one is giving error in Android Download Tool and when installed through recovery manager, it is stuck in micromax logo.
Note:- In Eclairs recovery , the kernel version of froyo (in About) is not changing and everything is working.
Congrtzzz.....
ngage_me said:
Presenting CWM Recovery v5
How to install...
1. Install the recovery .img
2. Use "Recovery Manager" apk to install this recovery...
3. on your sdcard there will be a folder "recoveryy" (note 'yy'), place this recover image in that folder.
4. Install from "recovery manager".
Alternative...
You can use "Android downloader" tool to directly flash the recovery...
Clicking Thanks is the best way to appreciate the work...
Hope I'll get enough thanks this time..
Click to expand...
Click to collapse
hey ngage_me....its another grt work from u dude.....u rockzzzzz..........and tanx for upgrading us frm stone age.......
--------------------------------------------------------
Juz click thanx if u liked this post...!!!
small problem bro
bro i flashed the stock rom dump which u provided and i got my cell working but the thing is my sdcard is not detected and nothing is opening messages contacts camera it is showing that android.process has stopped working force close please bro tell me what to do
Suggestion....
sridz.y.j said:
bro i flashed the stock rom dump which u provided and i got my cell working but the thing is my sdcard is not detected and nothing is opening messages contacts camera it is showing that android.process has stopped working force close please bro tell me what to do
Click to expand...
Click to collapse
OK cool!!! seems u messed of few things...
Try factory reset from recovery....
else
follow this... (2.1 original rom)
1. download full dump, link available in signature..
2. In case Android tool is detecting ur phone gr888.. just flash all the image available in the zip... MAKE SURE U HIG ERASE CHECK BOX WHILE FLASHING..., else first install the usb driver available in zip...
3. then repeat the step 2.
i sure ur phone will be back on working.... u can directly flash this recovery instead of using stock recovery from zip...
later u hv all options to using ny other rom...
Cheers!!!...
And yeah sorry for d delay.. i ws out on a party yesterday...
ramyjec said:
@ngage_me Yours Eclair recovery is working but Froyo one is giving error in Android Download Tool and when installed through recovery manager, it is stuck in micromax logo.
Note:- In Eclairs recovery , the kernel version of froyo (in About) is not changing and everything is working.
Click to expand...
Click to collapse
Can you please elaborate.....
which rom are you on.... in case froyo recovery hv problem i want to stop my Claro frnds to flash before i fix up the things....
It won't change anything in About... cauz that purely depends on boot.img and so not to worry...
ngage_me said:
Can you please elaborate.....
which rom are you on.... in case froyo recovery hv problem i want to stop my Claro frnds to flash before i fix up the things....
It won't change anything in About... cauz that purely depends on boot.img and so not to worry...
Click to expand...
Click to collapse
@ngage_me I am using Jet 2.1 (froyo one) and yours froyo recovery is not working (not installing through ARM 11 and if installed using recovery manager it stucks in micromax logo when going into recovery), but eclair recovery is working I have taken backup from it and everything sceems fine even sd-ext was backedup.
Welcome to the Index page of Xolo Q900. Here the record of everything related
to Q900 can be found.
Index
About Xolo Q900
Installing ClockWorkMod
Stock ROM
Custom ROM based on stock ROM(More stable and faster)
MIUI
News
Tips and Tricks(coming soon!)
can you please again post the stock rom for flashing the rom through flashtool i really need the rom to flash my mobile bak to stock rom please
Stock ROM links(updated)
Android Version: 4.2.2
Stock ROM in .img format(For flashing via SP Flash tool)
click here or here
Stock ROM in .zip format(For Stock recovery flashing)
click here
Thanks for notifying!!! Please do tell me if something goes wrong, I am here to help you
stock rom installation error
irfanjunaid said:
Android Version: 4.2.2
Stock ROM in .img format(For flashing via SP Flash tool)
click here or here
Stock ROM in .zip format(For Stock recovery flashing)
click here
Thanks for notifying!!! Please do tell me if something goes wrong, I am here to help you
Click to expand...
Click to collapse
Hi, I have installed Your MIUI custom rom for my q900 and then moved to another custom rom i.e. samsung note 3 rom. But the samsung note 3 rom have some serious bug so I wanted to go back to my old stock rom.
But whenever I tried to install the stock rom [downloaded from : http://forum.xda-developers.com/android/general/xolo-q900-official-stock-rom-t2809199] I got an error message showing "signature verification failure. installation aborted".
For installing those custom rom I have installed the CWM recovery and used that recovery to install the stock rom.
Really have no idea whats going wrong.
Any help will be appreciated.
soumyaxoloq900 said:
Hi, I have installed Your MIUI custom rom for my q900 and then moved to another custom rom i.e. samsung note 3 rom. But the samsung note 3 rom have some serious bug so I wanted to go back to my old stock rom.
But whenever I tried to install the stock rom [downloaded from : http://forum.xda-developers.com/android/general/xolo-q900-official-stock-rom-t2809199] I got an error message showing "signature verification failure. installation aborted".
For installing those custom rom I have installed the CWM recovery and used that recovery to install the stock rom.
Really have no idea whats going wrong.
Any help will be appreciated.
Click to expand...
Click to collapse
Yes, i can remember myself committing the same mistake! Nothing, just delete a file named checksum.exe... Then try again! Please report back if you still have problems!
irfanjunaid said:
Yes, i can remember myself committing the same mistake! Nothing, just delete a file named checksum.exe... Then try again! Please report back if you still have problems!
Click to expand...
Click to collapse
Sorry for very late reply.
Where Am I suppose to find that file [checksum.exe]?
Is it in the phone [havent searched yet] or is it in the Update package [searched but not found]
Thanks
Soumya
I got checksum_gen.exe....i then deleted that file....but no progress....can u please describe in detail cause i am also having d same problem
Darkwell_Habridge said:
I got checksum_gen.exe....i then deleted that file....but no progress....can u please describe in detail cause i am also having d same problem
Click to expand...
Click to collapse
Try deleting checksum.exe, checksum generator, checksum.ini files.
I am using sp tool to flash d stock firmware.....i tried deleting cheksum-gen.exe checksum.ini ...n when i tried to download d stock firmware thru sp tool, it shows searching(in d usb portion of sp tool)...n then it gets stuck there....
Darkwell_Habridge said:
I am using sp tool to flash d stock firmware.....i tried deleting cheksum-gen.exe checksum.ini ...n when i tried to download d stock firmware thru sp tool, it shows searching(in d usb portion of sp tool)...n then it gets stuck there....
Click to expand...
Click to collapse
OMG! This problem is not related to checksum. Alright, the problem is due to the absence of driver. You need to install MT6589 preloader drivers inorder to flash roms to MT6589 device. In windows 8, you need to disable driver signature check(google it) to install the driver. Good luck.
Ok thats it...flashed d stock rom successfully...n d process wz perfect...n learned some new things. 2..thank u for d help..
Darkwell_Habridge said:
Ok thats it...flashed d stock rom successfully...n d process wz perfect...n learned some new things. 2..thank u for d help..
Click to expand...
Click to collapse
You are welcome, please don't forget to press thanks!
Hi Guys,
Before you guys shoot me down, Just wanted to say, i searched XDA for 2 hours, couldn't find the exact reply. And a few topics are open since a year with no reply, So thinking that someone will reply to me. I am opening this "Need Help" Ticket.
I have a micromax a110 with 4.04 - as i got no update ever! So what i did was
Rooted the phone properly as per the procedure.
Downloaded the CWM 6.0.4.9 recovery [selinux] and flashed it with Recovery Link :http://forum.xda-developers.com/mic...opment/recovery-cwm-6-0-4-9-recovery-t2789175
Downloaded the [ROM][4.2.2] CanvaS5™ V1.1 Link: http://forum.xda-developers.com/showthread.php?t=2775553
After flashing the rom properly, when i reboot the phone, it gets stuck on the boot screen forever. Am i doing something wrong? Should i have flashed a kernel? or something. Please note, i am not looking into going back to stock, as i have moved into the dark side of the root world .
Since i have just been a Read-only user of XDA for all this while(more than a year), with no posts ever, i cant request for help on the Developer Thread as it requires privileges. Requesting someone to please post this topic there so i can speak to the dev or please give me a answer to help me:silly:
4.2.2 won't support SELinux
kunalsaddar said:
Hi Guys,
Before you guys shoot me down, Just wanted to say, i searched XDA for 2 hours, couldn't find the exact reply. And a few topics are open since a year with no reply, So thinking that someone will reply to me. I am opening this "Need Help" Ticket.
I have a micromax a110 with 4.04 - as i got no update ever! So what i did was
Rooted the phone properly as per the procedure.
Downloaded the CWM 6.0.4.9 recovery [selinux] and flashed it with Recovery Link :http://forum.xda-developers.com/mic...opment/recovery-cwm-6-0-4-9-recovery-t2789175
Downloaded the [ROM][4.2.2] CanvaS5™ V1.1 Link: http://forum.xda-developers.com/showthread.php?t=2775553
After flashing the rom properly, when i reboot the phone, it gets stuck on the boot screen forever. Am i doing something wrong? Should i have flashed a kernel? or something. Please note, i am not looking into going back to stock, as i have moved into the dark side of the root world .
Since i have just been a Read-only user of XDA for all this while(more than a year), with no posts ever, i cant request for help on the Developer Thread as it requires privileges. Requesting someone to please post this topic there so i can speak to the dev or please give me a answer to help me:silly:
Click to expand...
Click to collapse
That Recovery you flashed is SELinux enabled and is not supported by 4.1-4.2.2 Jelly bean Roms so you have got boot loop . You can try other recovery or flash higher android version roms .
---------- Post added at 05:20 PM ---------- Previous post was at 05:06 PM ----------
I think this CWM recovery will work with your downloaded rom
http://forum.xda-developers.com/showthread.php?t=2204785
And remember before flashing anything clear data,cache and dalvik-cache.
Happy Flashing
Thanks guys for the reply, let me flash the above CMW and check. Will revert shortly
How to i put the CMW in the phones root directory now for it to flash? The phone doesnt start so cant access it through usb. Any ideas?
kunalsaddar said:
How to i put the CMW in the phones root directory now for it to flash? The phone doesnt start so cant access it through usb. Any ideas?
Click to expand...
Click to collapse
Since your phone is not booting you should use SP Flash tool on PC to flash the recovery. Here's a guide to SP Flash tool:
gizbeat.com/3774/how-to-flash-cwm-without-root-with-sp-flash-tool/
Hope it works .
4shreyas said:
Since your phone is not booting you should use SP Flash tool on PC to flash the recovery. Here's a guide to SP Flash tool:
gizbeat.com/3774/how-to-flash-cwm-without-root-with-sp-flash-tool/
Hope it works .
Click to expand...
Click to collapse
Thanks dude, for your quick response. I wont be able to confirm on this today as setting up SP Flash tool is just too hard. It talks about some scatter file. I dont know how to make that.Let me get a grip on that, will confirm then. Thanks for the help anyhow
kunalsaddar said:
Thanks dude, for your quick response. I wont be able to confirm on this today as setting up SP Flash tool is just too hard. It talks about some scatter file. I dont know how to make that.Let me get a grip on that, will confirm then. Thanks for the help anyhow
Click to expand...
Click to collapse
Great , Here the link for official Jelly bean update for your device by micromax as said in that post . I think that file has scatter file (it contains your phone's storage partition info ) . There is also guide to flash using SP Flash tool . Use it .
http://forum.xda-developers.com/showthread.php?t=2209288
Hit Thanks if it works
4shreyas said:
Great , Here the link for official Jelly bean update for your device by micromax as said in that post . I think that file has scatter file (it contains your phone's storage partition info ) . There is also guide to flash using SP Flash tool . Use it .
http://forum.xda-developers.com/showthread.php?t=2209288
Hit Thanks if it works
Click to expand...
Click to collapse
Hey shreyas,
I have tried it with SP tools, it doesnt work, man. Drivers, Softwares, updated all of them, i keep doing everything. I know i am doing something wrong, but its hard to identify, spent like the entire night trying to make it. Can't i get a flashable zip for CMW instead or know that on which rom did the CWM selinux work on? This boot looping is now killing :fingers-crossed:
Finally, i found a way, thanks 4Shreyas for all the help. Gave me knowledge and helped me identify the errors.
I couldn't flash the rom or the cmw recvoery through the pc as the drivers for SP tools never worked on my Win 8.1 x64. Finally applied the stock jellybean file from http://forum.xda-developers.com/showthread.php?t=2160609 . It updated my CMW since that was the problem i was stuck in bootloop.
After that i flash the phone with my desired rom.
In the end, all good:laugh:
kunalsaddar said:
Finally, i found a way, thanks 4Shreyas for all the help. Gave me knowledge and helped me identify the errors.
I couldn't flash the rom or the cmw recvoery through the pc as the drivers for SP tools never worked on my Win 8.1 x64. Finally applied the stock jellybean file from http://forum.xda-developers.com/showthread.php?t=2160609 . It updated my CMW since that was the problem i was stuck in bootloop.
After that i flash the phone with my desired rom.
In the end, all good:laugh:
Click to expand...
Click to collapse
Cheers bro !!!! Yes getting MTK drivers in win 8 is a challenging task and as SELinux CWM recovery is concerned you can flash 4.3.x and 4.4.x roms . Google it , if any rom is available then use that recovery to flash those roms .
Enjoy !!
4shreyas said:
Cheers bro !!!! Yes getting MTK drivers in win 8 is a challenging task and as SELinux CWM recovery is concerned you can flash 4.3.x and 4.4.x roms . Google it , if any rom is available then use that recovery to flash those roms .
Enjoy !!
Click to expand...
Click to collapse
True that, i actually gave up trying to find the drivers. There arnt any 4.3 or 4.4.x roms released for mmx. When they do, will surely apply the Selinux CWM. Thanks for all the help .:good:
Q&A for PHILZ RECOVERY for SPICE MI509
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for PHILZ RECOVERY for SPICE MI509. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Not working...
Hi "Saurabh" i tried this procedure my Spice MI509 is showing Spice logo "S" and restarting continuously please help me out.
epsan said:
Hi "Saurabh" i tried this procedure my Spice MI509 is showing Spice logo "S" and restarting continuously please help me out.
Click to expand...
Click to collapse
How u flashing this recovery...???
Use mobile uncle tool...
It needs root and then place the recovery in sdcard after renaming It to recovery.img and then open Mobil uncle tool and select install recovery from sdcard and then select the recovery file...
Wait some time and your recovery will work now...
And I want to know that on which android version u r?? Kitkat or jelly bean???
saurabh1234 said:
How u flashing this recovery...???
Use mobile uncle tool...
It needs root and then place the recovery in sdcard after renaming It to recovery.img and then open Mobil uncle tool and select install recovery from sdcard and then select the recovery file...
Wait some time and your recovery will work now...
And I want to know that on which android version u r?? Kitkat or jelly bean???
Click to expand...
Click to collapse
Hey Thanks for reply, i resolved that issue by trying to turn on the phone by usb power, phone boots up normally but without any signal both sims are properly inserted but no signal (may be IMEI issue) how to resolve it???. ( procedure i followed for previous attempt, i am currently on JellyBean my stock android version(people say Mi509 come with KITKAT out of box but its not in case of my phone. i followed your procedure as it is, downloaded attachment and MobileUncle apk installed that apk , opened that uncle and selected recovery update and it automatically restarted.)
now i know that my standard Android Recovery was OVERWRITTEN by custom recovery and i DIDNT backup my stock recovery . what should i do. ( i read something about EFS partition which contains IMEI info which was corrupted by custom recovery i believe ). and also please send me backup of recovery partition (or EFS) to me @ [email protected] i will set my own IMEI nos using Enginering Mode apk . this is my only phone please help me
epsan said:
now i know that my standard Android Recovery was OVERWRITTEN by custom recovery and i DIDNT backup my stock recovery . what should i do. ( i read something about EFS partition which contains IMEI info which was corrupted by custom recovery i believe ). and also please send me backup of recovery partition (or EFS) to me @ [email protected] i will set my own IMEI nos using Enginering Mode apk . this is my only phone please help me
Click to expand...
Click to collapse
thats why i was asking about android version....
bcoz all roms and recovery available for MI509 uses KITKAT kernel and you flashed it on Jellybean...
here i attach the stock recovery of jellybean....
for fixing IMEI use this link.........
This will fix it permanently...
IMEI TOOL with video tutorial....https://docs.google.com/uc?id=0B5DM6ZSz3dh-eTQzV2VWck1Kckk&export=download
Database- http://www.mediafire.com/download/no1oo8rroq4uqtr/Database.rar
use database file from second link bcoz this database is for spice mi509....
and next time dont flash rom if you have jellybean
Hey "Sourabh" did i "bricked" my phone???? and how to overcome that please.............
---------- Post added at 02:44 PM ---------- Previous post was at 02:03 PM ----------
Again Thanks for the reply, i just came to know that..... i should back up efs directory thank you very much for your support, i will let you know the status once i finish all the countermeasures.
epsan said:
Hey "Sourabh" did i "bricked" my phone???? and how to overcome that please.............
---------- Post added at 02:44 PM ---------- Previous post was at 02:03 PM ----------
Again Thanks for the reply, i just came to know that..... i should back up efs directory thank you very much for your support, i will let you know the status once i finish all the countermeasures.
Click to expand...
Click to collapse
If your device I bricked then just flash stock firmware using sp flash tool...if you don't know how to ...
Then give it to service centre but don't tell them about rooting and flashing custom rom...
Bcoz if you tell them then they will cost you money...
saurabh1234 said:
If your device I bricked then just flash stock firmware using sp flash tool...if you don't know how to ...
Then give it to service centre but don't tell them about rooting and flashing custom rom...
Bcoz if you tell them then they will cost you money...
Click to expand...
Click to collapse
Hey "Saurabh" you didddit. i tried using SPFTool and its working i was able to get my imei nos also(but it took me two days to figure it out). NOW how do i upgrade my mobile to KITKAT do you have that rom. can you please send me that link(stock rom).
epsan said:
Hey "Saurabh" you didddit. i tried using SPFTool and its working i was able to get my imei nos also(but it took me two days to figure it out). NOW how do i upgrade my mobile to KITKAT do you have that rom. can you please send me that link(stock rom).
Click to expand...
Click to collapse
Above was mistyping I was writing 'is' but leaved at 'i'. But thats no problem.
Below is stock kitkat firmware....flash through spflashtool...
https://docs.google.com/uc?id=0B1F4thoxIkjEb3pMT0N1UEhmQ00
When flashing firmware is done then root your mobile and install the philz recovery using flashify or mobile uncle tool to install custom rom...
saurabh1234 said:
Above was mistyping I was writing 'is' but leaved at 'i'. But thats no problem.
Below is stock kitkat firmware....flash through spflashtool...
https://docs.google.com/uc?id=0B1F4thoxIkjEb3pMT0N1UEhmQ00
When flashing firmware is done then root your mobile and install the philz recovery using flashify or mobile uncle tool to install custom rom...
Click to expand...
Click to collapse
Thank you very much "Saurabh" it really worked and i am running stock KITKAT now and will change it to custom rom very soon... again Thank you very much :good:
epsan said:
Thank you very much "Saurabh" it really worked and i am running stock KITKAT now and will change it to custom rom very soon... again Thank you very much :good:
Click to expand...
Click to collapse
i am always here to help...
and now i am uploading my new ORIGINAL LOLLIPOP ROM CM12.1 ...
and links will be available in two three days...
Could someone provide backup image of spice MI 509. My phone got stuck in a bootloader while changing font.
Is there any method to come out of the problem. Pls reply.
subash.ateet said:
Could someone provide backup image of spice MI 509. My phone got stuck in a bootloader while changing font.
Is there any method to come out of the problem. Pls reply.
Click to expand...
Click to collapse
download the stock rom from xda firmware site and then use flashtool in that zip to install the firmware in your mi509...it will boot... but u will lost your apps installed earlier...
saurabh1234 said:
download the stock rom from xda firmware site and then use flashtool in that zip to install the firmware in your mi509...it will boot... but u will lost your apps installed earlier...
Click to expand...
Click to collapse
Thanks Saurabh1234 for your reply.
How can I use flashtool in my mobile as it is stucking in bootloader? I can access only Recovery mode ( Power + Vol. down). Is there any method to install the firmware by Recovery mode(Power + Vol. down)?
I had already tried the SP flastool to flash my mobile but the software dont access/ read my mobile.
subash.ateet said:
Thanks Saurabh1234 for your reply.
How can I use flashtool in my mobile as it is stucking in bootloader? I can access only Recovery mode ( Power + Vol. down). Is there any method to install the firmware by Recovery mode(Power + Vol. down)?
I had already tried the SP flastool to flash my mobile but the software dont access/ read my mobile.
Click to expand...
Click to collapse
flashtool will work on your pc and laptop...
download firmware and then install drivers given in it in your pc then open your flashtool and load bootloader...
now connect your device to pc via data cable with or without battery ...
then click on download button in flashtool and press vol down on device.
then update will start..
check this link...
http://forum.xda-developers.com/android/general/rooting-cwm-firmware-spice-stellar-mi-t2969920
Trying to port PhilZ 6.59.0
Can you tell me how you ported PhilZ 6.57.9.......coz i'm trying to port PhilZ 6.59.0
This is a Video TUT on How to fix Unable To Mount /System Partiton
While Flashing A Rom:-
In The Video I have used the Multi-Rom TWRP 3.0.0 but this problem occurred with every Version
Watch the video - Video Starting is About the problem and then the solution to flash roms bypassing this prob.
*This is My First video so ignore Mistakes i made:silly:
Use EarPhone For Best Sound
Proper Method To -Install a rom From TWRP Follow:-
1).Reboot Into recovery [Obviously]
2).Select Wipe-AdvanceWipe-and select Dalvik,Cache,System,Data and Swipe the slider to wipe
3) Then Follow the Procedure i mentioned in video above
4).Then install Any Rom u want
Note:- This is not a permanent fix you have to follow the same procedure every time you want to install the ROM
THANKS To
XDA-Devs
@Sheref (for asking a Video Tut)
@GautamMaini (For Video and Thread)
Do Hit Thanks Button If I Helped It Encourages ME
Reserved Waiting For Video to Upload
Very helpful bro:good:
Bro I got a new method to solve that problem (not a permanently solution).
And now I can install any ROM.
Sheref said:
Bro I got a new method to solve that problem (not a permanently solution).
And now I can install any ROM.
Click to expand...
Click to collapse
What it is
Gautam Maini said:
What it is
Click to expand...
Click to collapse
I'm using old twrp 2.7..1...
Select wipe and select system and then select repair or change file system(something like that)and change the system partition ext4 to ext3 and wipe ,done .install ROM . now I flashed baiducloud os and it successfully installed and booted.
Sry for my bad English
bro its not working for me .. m having twrp 2.7.1 nd trying to flash kit-cat build 4 ... tried everything bt still getting error "unable to mount /system". plaese help.. tnx
aniket_anky said:
bro its not working for me .. m having twrp 2.7.1 nd trying to flash kit-cat build 4 ... tried everything bt still getting error "unable to mount /system". plaese help.. tnx
Click to expand...
Click to collapse
First Wipe system then restart recovery with no os installed. Then mount system and install rom !
Otherwise
Update to latest twrp
aniket_anky said:
bro its not working for me .. m having twrp 2.7.1 nd trying to flash kit-cat build 4 ... tried everything bt still getting error "unable to mount /system". plaese help.. tnx
Click to expand...
Click to collapse
Bro if the method not working ,I have one method>>Using odin u can flash Roms.first you have to install assayed kitchen from this link ( https://forum.xda-developers.com/ch...ndroid-roms-editor-assayyedkitchen-t3410545). Then convert the ROM (the ROM u want to install) to .tar file (its Odin flashable file).
You can get the steps from above link.
Now I'm using this method to install Roms.
For more details PM me.
Thanks!!! You Are great
TheAndroidMods said:
Thanks!!! You Are great
Click to expand...
Click to collapse
Pleasure Helping
Sheref said:
Bro if the method not working ,I have one method>>Using odin u can flash Roms.first you have to install assayed kitchen from this link ( https://forum.xda-developers.com/ch...ndroid-roms-editor-assayyedkitchen-t3410545). Then convert the ROM (the ROM u want to install) to .tar file (its Odin flashable file).
You can get the steps from above link.
Now I'm using this method to install Roms.
For more details PM me.
Click to expand...
Click to collapse
thanks bro u saved the day
aniket_anky said:
thanks bro u saved the day
Click to expand...
Click to collapse
Welcome bro. :good::laugh:
Thanks a Core!
Sheref said:
Bro if the method not working ,I have one method>>Using odin u can flash Roms.first you have to install assayed kitchen from this link ( https://forum.xda-developers.com/ch...ndroid-roms-editor-assayyedkitchen-t3410545). Then convert the ROM (the ROM u want to install) to .tar file (its Odin flashable file).
You can get the steps from above link.
Now I'm using this method to install Roms.
For more details PM me.
Click to expand...
Click to collapse
Hey Sheref, your suggestion rocked.
First, I used Assayyed Kitchen for modifying Jelly Bean 4.1.2 of my Samsung Quattro GT-i8552. I made rom zips and flashed modified rom successfully after changing a few lines in updater-script.
Yesterday, I followed same method for Samsung Core GT-i8262. While flashing the rom, I got status 0 error. Then, I made almost 8 to 10 different rom zips with different alterations in updater-script; some copied from custom roms available for Core. Even after that I got status 0 error. I was highly frustrated with what was going on. I searched XDA for solution for updater-script errors and solutions etc. yesterday. But, I could not get one. Today morning, again I started my search on XDA and your post wished me Good Morning . Finally, I could flash / install modified Jelly Bean 4.1.2 on Core GT-i8262 (rooted, busy box, init.d, deodexed, debloated 84 apps) via odin. Breakthrough!
For Core 28bit .tar file worked; 32bit did not. Any idea why? Because as per my knowledge Quattro and Core are 32bit devices. Please correct me if I am wrong.
Thanks a Core
zooperaj said:
Hey Sheref, your suggestion rocked.
First, I used Assayyed Kitchen for modifying Jelly Bean 4.1.2 of my Samsung Quattro GT-i8552. I made rom zips and flashed modified rom successfully after changing a few lines in updater-script.
Yesterday, I followed same method for Samsung Core GT-i8262. While flashing the rom, I got status 0 error. Then, I made almost 8 to 10 different rom zips with different alterations in updater-script; some copied from custom roms available for Core. Even after that I got status 0 error. I was highly frustrated with what was going on. I searched XDA for solution for updater-script errors and solutions etc. yesterday. But, I could not get one. Today morning, again I started my search on XDA and your post wished me Good Morning . Finally, I could flash / install modified Jelly Bean 4.1.2 on Core GT-i8262 (rooted, busy box, init.d, deodexed, debloated 84 apps) via odin. Breakthrough!
For Core 28bit .tar file worked; 32bit did not. Any idea why? Because as per my knowledge Quattro and Core are 32bit devices. Please correct me if I am wrong.
Thanks a Core
Click to expand...
Click to collapse
Thanks bro.
32bit also not worked for me , idk why. Thanks for trying it. :angel: :angel::angel::angel:
hello, i want to repartition system partition of my galaxy core i8262,any help?
current system partition = 1.25 gb but i want above 1.80 gb or equal to 1.80 gb .
[email protected] said:
hello, i want to repartition system partition of my galaxy core i8262,any help?
current system partition = 1.25 gb but i want above 1.80 gb or equal to 1.80 gb .
Click to expand...
Click to collapse
Don't mess
Gautam Maini said:
Don't mess
Click to expand...
Click to collapse
you mean its impossible to do so
[email protected] said:
you mean its impossible to do so
Click to expand...
Click to collapse
Yes you can say . Repartition can lead to derious damage