Database Info

[Q] Galaxy S GT I9003 stuck in recovery loop

Hi everyone,
I had GT i9003 with 2.3.6 as the firmware.
I recently flashed custom ROM CM10-GalaxySL-JZO54K-Alpha4.zip , which worked fine intially.
Later due to network problems i tried restoring to my original firmware.
After doing the restore I am stuck.
Right now whatever i do the phone comes back to CWM recovery. I have tried to flash the phone again with
different custom ROMs, but after saying the installation complete the phone again reboots to CWM recovery.
Hope i have made my problem clear.
can anyone put some light on this?????

hey dude CM10 A4 has different partition,you must flash from pit,you can't restore you GB file from CM10 A4

MR.Volkf said:
hey dude CM10 A4 has different partition,you must flash from pit,you can't restore you GB file from CM10 A4
Click to expand...
Click to collapse
Thanks for the reply
Could you please guide me how to do that??

NastyRom said:
Thanks for the reply
Could you please guide me how to do that??
Click to expand...
Click to collapse
Flash latona.pit...then XXKPE , Then DDLF2...latona.pit will reset ur partition...

When flashing from CM10 ALpha4 latona.pit then XXKPE but DONT include BOOTLOADER.

same problem
I have same problem can anyone plz tell me in detail what to do..??
ASAP

This will work..!!
all-stock roms - http://forum.xda-developers.com/showthread.php?t=1004647
first install I9003XXKPQ (with 4 files + pit alt link: http://www.mediafire.com/?ka3krtzka2oho88)
Then install I9003DDLF2

NastyRom said:
Could you please guide me how to do that??
Click to expand...
Click to collapse
If you made a NANDROID(CWM) backup of your GingerBread 2.3.6 firmware, you won´t be able restore it while still on CM10.(as mentioned by MR.Volkf).
I suppose you know that to get back to 2.3.6 you will need to use ODIN to flash the firmwares previously mentioned.
If you´re not familiar with the proper steps involved with ODIN, here´s a great guide on how to do that, thanks to "Misledz".
http://forum.xda-developers.com/showthread.php?t=1133787
Once you get back to GB(2.3.6), then I believe you should be able to restore any GB NANDROID backups that you may have previously made.(From the restore option in CWM recovery mode).
Good Luck!

thanku
amitkpatil.20 said:
all-stock roms - http://forum.xda-developers.com/showthread.php?t=1004647
first install I9003XXKPQ (with 4 files + pit alt link: http://www.mediafire.com/?ka3krtzka2oho88)
Then install I9003DDLF2
Click to expand...
Click to collapse
:good:thanks so much

Repair Splash screen

i made a mistake (i think) with flashing a cutom rom and now splash screen (name of device) is messed up
if someone has a idea on how to fix it, please let me know...
Thanks

DutchGlory said:
i made a mistake (i think) with flashing a cutom rom and now splash screen (name of device) is messed up
if someone has a idea on how to fix it, please let me know...
Thanks
Click to expand...
Click to collapse
You are more likely going to get help if you post in detail your issue, what exact model note you have, what custom rom and recovery you installed, what version of odin your using.
Give as much detail as you can............

RE: Repair Splash screen GT-N8000
kkretch said:
You are more likely going to get help if you post in detail your issue, what exact model note you have, what custom rom and recovery you installed, what version of odin your using.
Give as much detail as you can............
Click to expand...
Click to collapse
Well i have the GT-N8000 an i used ODIN 3.0.7 flashing ClockWorkMod Recovery here:
forum.xda-developers - show thread 2102677
after that i flashed CyanoGenMod ROM 10.2 Nightly ("cm-10.2-20131221-NIGHTLY-n8000.zip") Here
download.cyanogenmod.org device GT-N8000
I tried to restore splash sreen by flashing a stock ROM N8000XXCMF1_N8000PHNCMG1_PHN again... didden't work...
so any other thoughts are welcome...

The initial Samsung splash is in the kernel .
Suggest in recovery format data system cache and sdcard .
Boot to download mode flash stock rom via odin .

JJEgan said:
The initial Samsung splash is in the kernel .
Suggest in recovery format data system cache and sdcard .
Boot to download mode flash stock rom via odin .
Click to expand...
Click to collapse
So i need to look for separate kernel file. a stock rom doesn't have a kernel, only basic system files...

DutchGlory said:
So i need to look for separate kernel file. a stock rom doesn't have a kernel, only basic system files...
Click to expand...
Click to collapse
If a stock rom has no kernel in your view i suggest you read the faqs and guides before flashing anything ever again .
Kernel - This is always supplied with a ROM. It is the beating heart of Android. The ROM cannot function without the kernel. Since all ROMs include a kernel, if you're using a custom Kernel then flash a ROM, you will need to reflash the kernel again.

DutchGlory said:
Well i have the GT-N8000 an i used ODIN 3.0.7 flashing ClockWorkMod Recovery here:
forum.xda-developers - show thread 2102677
after that i flashed CyanoGenMod ROM 10.2 Nightly ("cm-10.2-20131221-NIGHTLY-n8000.zip") Here
download.cyanogenmod.org device GT-N8000
I tried to restore splash sreen by flashing a stock ROM N8000XXCMF1_N8000PHNCMG1_PHN again... didden't work...
so any other thoughts are welcome...
Click to expand...
Click to collapse
Can you please tell us exactly how you flashed the stock ROM

kkretch said:
Can you please tell us exactly how you flashed the stock ROM
Click to expand...
Click to collapse
with ODIN i usually dont have any problems with flashing roms. Not where exactly the splash screen is installed...
but with a rooted rom things can go bad. Normally when you flash a rom the splash screen stays unaffected.
For some reason it was damaged. so i need to find a way to repair it... not easy ....

DutchGlory said:
with ODIN i usually dont have any problems with flashing roms. Not where exactly the splash screen is installed...
but with a rooted rom things can go bad. Normally when you flash a rom the splash screen stays unaffected.
For some reason it was damaged. so i need to find a way to repair it... not easy ....
Click to expand...
Click to collapse
When you tried to flash to factory firmware did odin give you a message of pass or fail?
When you flashed to factory ROM did it actually install the factory firmware?
Have you have tried other versions of odin.......a copy of Odin3 v1.85 in attachment, if you want to try it.

kkretch said:
When you tried to flash to factory firmware did odin give you a message of pass or fail?
When you flashed to factory ROM did it actually install the factory firmware?
Have you have tried other versions of odin.......a copy of Odin3 v1.85 in attachment, if you want to try it.
Click to expand...
Click to collapse
i never had a problem with 3.0.7 i even tried "mobile ODIN"

DutchGlory said:
i never had a problem with 3.0.7 i even tried "mobile ODIN"
Click to expand...
Click to collapse
What actually happens when you say the spash screen is messed up?
Does the tablet actually start? Have you tried flashing another custom touch wiz based firmware like Revolution HD or even Omni rom?

[Q] (HELP) Micromax A110 stuck on Bootscreen- Rom-Canvas 5.1

Hi Guys,
Before you guys shoot me down, Just wanted to say, i searched XDA for 2 hours, couldn't find the exact reply. And a few topics are open since a year with no reply, So thinking that someone will reply to me. I am opening this "Need Help" Ticket.
I have a micromax a110 with 4.04 - as i got no update ever! So what i did was
Rooted the phone properly as per the procedure.
Downloaded the CWM 6.0.4.9 recovery [selinux] and flashed it with Recovery Link :http://forum.xda-developers.com/mic...opment/recovery-cwm-6-0-4-9-recovery-t2789175
Downloaded the [ROM][4.2.2] CanvaS5™ V1.1 Link: http://forum.xda-developers.com/showthread.php?t=2775553
After flashing the rom properly, when i reboot the phone, it gets stuck on the boot screen forever. Am i doing something wrong? Should i have flashed a kernel? or something. Please note, i am not looking into going back to stock, as i have moved into the dark side of the root world .
Since i have just been a Read-only user of XDA for all this while(more than a year), with no posts ever, i cant request for help on the Developer Thread as it requires privileges. Requesting someone to please post this topic there so i can speak to the dev or please give me a answer to help me:silly:

4.2.2 won't support SELinux
kunalsaddar said:
Hi Guys,
Before you guys shoot me down, Just wanted to say, i searched XDA for 2 hours, couldn't find the exact reply. And a few topics are open since a year with no reply, So thinking that someone will reply to me. I am opening this "Need Help" Ticket.
I have a micromax a110 with 4.04 - as i got no update ever! So what i did was
Rooted the phone properly as per the procedure.
Downloaded the CWM 6.0.4.9 recovery [selinux] and flashed it with Recovery Link :http://forum.xda-developers.com/mic...opment/recovery-cwm-6-0-4-9-recovery-t2789175
Downloaded the [ROM][4.2.2] CanvaS5™ V1.1 Link: http://forum.xda-developers.com/showthread.php?t=2775553
After flashing the rom properly, when i reboot the phone, it gets stuck on the boot screen forever. Am i doing something wrong? Should i have flashed a kernel? or something. Please note, i am not looking into going back to stock, as i have moved into the dark side of the root world .
Since i have just been a Read-only user of XDA for all this while(more than a year), with no posts ever, i cant request for help on the Developer Thread as it requires privileges. Requesting someone to please post this topic there so i can speak to the dev or please give me a answer to help me:silly:
Click to expand...
Click to collapse
That Recovery you flashed is SELinux enabled and is not supported by 4.1-4.2.2 Jelly bean Roms so you have got boot loop . You can try other recovery or flash higher android version roms .
---------- Post added at 05:20 PM ---------- Previous post was at 05:06 PM ----------
I think this CWM recovery will work with your downloaded rom
http://forum.xda-developers.com/showthread.php?t=2204785
And remember before flashing anything clear data,cache and dalvik-cache.
Happy Flashing

Thanks guys for the reply, let me flash the above CMW and check. Will revert shortly

How to i put the CMW in the phones root directory now for it to flash? The phone doesnt start so cant access it through usb. Any ideas?

kunalsaddar said:
How to i put the CMW in the phones root directory now for it to flash? The phone doesnt start so cant access it through usb. Any ideas?
Click to expand...
Click to collapse
Since your phone is not booting you should use SP Flash tool on PC to flash the recovery. Here's a guide to SP Flash tool:
gizbeat.com/3774/how-to-flash-cwm-without-root-with-sp-flash-tool/
Hope it works .

4shreyas said:
Since your phone is not booting you should use SP Flash tool on PC to flash the recovery. Here's a guide to SP Flash tool:
gizbeat.com/3774/how-to-flash-cwm-without-root-with-sp-flash-tool/
Hope it works .
Click to expand...
Click to collapse
Thanks dude, for your quick response. I wont be able to confirm on this today as setting up SP Flash tool is just too hard. It talks about some scatter file. I dont know how to make that.Let me get a grip on that, will confirm then. Thanks for the help anyhow

kunalsaddar said:
Thanks dude, for your quick response. I wont be able to confirm on this today as setting up SP Flash tool is just too hard. It talks about some scatter file. I dont know how to make that.Let me get a grip on that, will confirm then. Thanks for the help anyhow
Click to expand...
Click to collapse
Great , Here the link for official Jelly bean update for your device by micromax as said in that post . I think that file has scatter file (it contains your phone's storage partition info ) . There is also guide to flash using SP Flash tool . Use it .
http://forum.xda-developers.com/showthread.php?t=2209288
Hit Thanks if it works

4shreyas said:
Great , Here the link for official Jelly bean update for your device by micromax as said in that post . I think that file has scatter file (it contains your phone's storage partition info ) . There is also guide to flash using SP Flash tool . Use it .
http://forum.xda-developers.com/showthread.php?t=2209288
Hit Thanks if it works
Click to expand...
Click to collapse
Hey shreyas,
I have tried it with SP tools, it doesnt work, man. Drivers, Softwares, updated all of them, i keep doing everything. I know i am doing something wrong, but its hard to identify, spent like the entire night trying to make it. Can't i get a flashable zip for CMW instead or know that on which rom did the CWM selinux work on? This boot looping is now killing :fingers-crossed:

Finally, i found a way, thanks 4Shreyas for all the help. Gave me knowledge and helped me identify the errors.
I couldn't flash the rom or the cmw recvoery through the pc as the drivers for SP tools never worked on my Win 8.1 x64. Finally applied the stock jellybean file from http://forum.xda-developers.com/showthread.php?t=2160609 . It updated my CMW since that was the problem i was stuck in bootloop.
After that i flash the phone with my desired rom.
In the end, all good:laugh:

kunalsaddar said:
Finally, i found a way, thanks 4Shreyas for all the help. Gave me knowledge and helped me identify the errors.
I couldn't flash the rom or the cmw recvoery through the pc as the drivers for SP tools never worked on my Win 8.1 x64. Finally applied the stock jellybean file from http://forum.xda-developers.com/showthread.php?t=2160609 . It updated my CMW since that was the problem i was stuck in bootloop.
After that i flash the phone with my desired rom.
In the end, all good:laugh:
Click to expand...
Click to collapse
Cheers bro !!!! Yes getting MTK drivers in win 8 is a challenging task and as SELinux CWM recovery is concerned you can flash 4.3.x and 4.4.x roms . Google it , if any rom is available then use that recovery to flash those roms .
Enjoy !!

4shreyas said:
Cheers bro !!!! Yes getting MTK drivers in win 8 is a challenging task and as SELinux CWM recovery is concerned you can flash 4.3.x and 4.4.x roms . Google it , if any rom is available then use that recovery to flash those roms .
Enjoy !!
Click to expand...
Click to collapse
True that, i actually gave up trying to find the drivers. There arnt any 4.3 or 4.4.x roms released for mmx. When they do, will surely apply the Selinux CWM. Thanks for all the help .:good:

[Q&A] Twrp recovery

Q&A for Twrp recovery
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Twrp recovery. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

hi avi,
i am using q3k out of the box kk
installed twrp 2.7 via flashify
then tried kk based lg rom successfully booted and tried gidgat rom this is also successfully booted both are working with root also
and then tried jb based roms xtreme and pure xperia this is also successfully booted and working with root perfectly

vijay jay said:
hi avi,
i am using q3k out of the box kk
installed twrp 2.7 via flashify
then tried kk based lg rom successfully booted and tried gidgat rom this is also successfully booted both are working with root also
and then tried jb based roms xtreme and pure xperia this is also successfully booted and working with root perfectly
Click to expand...
Click to collapse
Please see if backup restore works.
flash kk rom
take backup in recovery
flash jb rom
take backup
now restore kk rom
see if it works
restore jb rom
see if it works:good:

hi avi,
tried backup and restoring roms between jb and kk everything working perfectly without any issues :good:

vijay jay said:
hi avi,
tried backup and restoring roms between jb and kk everything working perfectly without any issues :good:
Click to expand...
Click to collapse
Thanks for trying bro.:good::good:
U said ur phone came with kitkat out of the box.
when u flashed a JB rom did ur camera worked as normal??

avi3230 said:
Thanks for trying bro.:good::good:
U said ur phone came with kitkat out of the box.
when u flashed a JB rom did ur camera worked as normal??
Click to expand...
Click to collapse
no not working in every jb rom even flashed ur jb uboot still camera not working

vijay jay said:
no not working in every jb rom even flashed ur jb uboot still camera not working
Click to expand...
Click to collapse
Ohhh Ok
Have u tried this method.
U need to flash the KK with sp tools first.
I need confirmation for it as no one has tired it yet.

avi3230 said:
Ohhh Ok
Have u tried this method.
U need to flash the KK with sp tools first.
I need confirmation for it as no one has tired it yet.
Click to expand...
Click to collapse
yes tried everything using that method even tried to took backup of kk stock camera using titanium then restored in jb rom still camera is not working

vijay jay said:
yes tried everything using that method even tried to took backup of kk stock camera using titanium then restored in jb rom still camera is not working
Click to expand...
Click to collapse
Have u installed whole kk s007 version with sp tools??
If yes then there must be some change in kk out of the box phones.

avi3230 said:
Have u installed whole kk s007 version with sp tools??
If yes then there must be some change in kk out of the box phones.
Click to expand...
Click to collapse
yes installed with sp tools still camera not working
my phone also came with same version (Kk S007-27052014)

vijay jay said:
yes installed with sp tools still camera not working
my phone also came with same version (Kk S007-27052014)
Click to expand...
Click to collapse
Have u tried format+download option in spflash tools

avi3230 said:
Have u tried format+download option in spflash tools
Click to expand...
Click to collapse
not yet tried will u plz explain little bit about this

vijay jay said:
not yet tried will u plz explain little bit about this
Click to expand...
Click to collapse
if u use SP_Flash_Tool_v3.1344.0.212 then try firmware upgrade option.
if u use SP_Flash_Tool_v5.1420.03 see attachment.

Flashed TWRP 2.7 recovery using sptools successfully..
But can't able to flash any stock ROM and failed to flash kk based hive ui ROM..

Unable to install recovery
Hi Avi,
I'm using Win 8 system, I installed the VCOM driver overriding the digital signature and established the Mediatek VCOM DA USB port.
Now when i'm trying to install recovery using SP tools, it downloads 100% and then gives error stating, "pmt changed for rom it must be downloaded".
Any advise on this?

7Hrishikesh said:
Hi Avi,
I'm using Win 8 system, I installed the VCOM driver overriding the digital signature and established the Mediatek VCOM DA USB port.
Now when i'm trying to install recovery using SP tools, it downloads 100% and then gives error stating, "pmt changed for rom it must be downloaded".
Any advise on this?
Click to expand...
Click to collapse
Please download philz recovery file from here (any will do)
Just use the scatter file inside it
tick only on recovery
click on it
select twrp recovery when asked
press download:good:

avi3230 said:
Please download philz recovery file from here (any will do)
Just use the scatter file inside it
tick only on recovery
click on it
select twrp recovery when asked
press download:good:
Click to expand...
Click to collapse
Not working, still the same error. I tried on Windows XP as well as on Windows 7 system.
P.S - "click on it & select twrp recovery when asked" i dont get this option
Appreciate your efforts. Like i said earlier you're "GOD OF Q3000!!!!!!!!"

7Hrishikesh said:
Not working, still the same error. I tried on Windows XP as well as on Windows 7 system.
P.S - "click on it & select twrp recovery when asked" i dont get this option
Appreciate your efforts. Like i said earlier you're "GOD OF Q3000!!!!!!!!"
Click to expand...
Click to collapse
Thanks but i am no GOD of Q3000
I am just a user like everyone here
now when u select the scatter file from philz
u will get this
now just untick uboot and boot
click on recovery name itself
u will get file browser and like this
finally when u flashing this is the screen
now press download button:good::good:

Thanks
Thanks a lot Avi Sir, All my problems has been sorted out. Thanks again. BTW, I'll bother you again if i stuck anywhere.

Recovery Error!!!
Sir,
I tried the method as described but landed with attached error. Not sure what's wrong.
I'm currently having CWM 6.0.2.8 Recovery by Bruno Martins....
Please advise.

[Video][How-To]Fix Unable To mount /system while installing a ROM

This is a Video TUT on How to fix Unable To Mount /System Partiton
While Flashing A Rom:-
In The Video I have used the Multi-Rom TWRP 3.0.0 but this problem occurred with every Version
Watch the video - Video Starting is About the problem and then the solution to flash roms bypassing this prob.
*This is My First video so ignore Mistakes i made:silly:
Use EarPhone For Best Sound
Proper Method To -Install a rom From TWRP Follow:-
1).Reboot Into recovery [Obviously]
2).Select Wipe-AdvanceWipe-and select Dalvik,Cache,System,Data and Swipe the slider to wipe
3) Then Follow the Procedure i mentioned in video above
4).Then install Any Rom u want
Note:- This is not a permanent fix you have to follow the same procedure every time you want to install the ROM
THANKS To
XDA-Devs
@Sheref (for asking a Video Tut)
@GautamMaini (For Video and Thread)
Do Hit Thanks Button If I Helped It Encourages ME

Reserved Waiting For Video to Upload

Very helpful bro:good:

Bro I got a new method to solve that problem (not a permanently solution).
And now I can install any ROM.

Sheref said:
Bro I got a new method to solve that problem (not a permanently solution).
And now I can install any ROM.
Click to expand...
Click to collapse
What it is

Gautam Maini said:
What it is
Click to expand...
Click to collapse
I'm using old twrp 2.7..1...
Select wipe and select system and then select repair or change file system(something like that)and change the system partition ext4 to ext3 and wipe ,done .install ROM . now I flashed baiducloud os and it successfully installed and booted.
Sry for my bad English

bro its not working for me .. m having twrp 2.7.1 nd trying to flash kit-cat build 4 ... tried everything bt still getting error "unable to mount /system". plaese help.. tnx

aniket_anky said:
bro its not working for me .. m having twrp 2.7.1 nd trying to flash kit-cat build 4 ... tried everything bt still getting error "unable to mount /system". plaese help.. tnx
Click to expand...
Click to collapse
First Wipe system then restart recovery with no os installed. Then mount system and install rom !
Otherwise
Update to latest twrp

aniket_anky said:
bro its not working for me .. m having twrp 2.7.1 nd trying to flash kit-cat build 4 ... tried everything bt still getting error "unable to mount /system". plaese help.. tnx
Click to expand...
Click to collapse
Bro if the method not working ,I have one method>>Using odin u can flash Roms.first you have to install assayed kitchen from this link ( https://forum.xda-developers.com/ch...ndroid-roms-editor-assayyedkitchen-t3410545). Then convert the ROM (the ROM u want to install) to .tar file (its Odin flashable file).
You can get the steps from above link.
Now I'm using this method to install Roms.
For more details PM me.

Thanks!!! You Are great

TheAndroidMods said:
Thanks!!! You Are great
Click to expand...
Click to collapse
Pleasure Helping

Sheref said:
Bro if the method not working ,I have one method>>Using odin u can flash Roms.first you have to install assayed kitchen from this link ( https://forum.xda-developers.com/ch...ndroid-roms-editor-assayyedkitchen-t3410545). Then convert the ROM (the ROM u want to install) to .tar file (its Odin flashable file).
You can get the steps from above link.
Now I'm using this method to install Roms.
For more details PM me.
Click to expand...
Click to collapse
thanks bro u saved the day

aniket_anky said:
thanks bro u saved the day
Click to expand...
Click to collapse
Welcome bro. :good::laugh:

Thanks a Core!
Sheref said:
Bro if the method not working ,I have one method>>Using odin u can flash Roms.first you have to install assayed kitchen from this link ( https://forum.xda-developers.com/ch...ndroid-roms-editor-assayyedkitchen-t3410545). Then convert the ROM (the ROM u want to install) to .tar file (its Odin flashable file).
You can get the steps from above link.
Now I'm using this method to install Roms.
For more details PM me.
Click to expand...
Click to collapse
Hey Sheref, your suggestion rocked.
First, I used Assayyed Kitchen for modifying Jelly Bean 4.1.2 of my Samsung Quattro GT-i8552. I made rom zips and flashed modified rom successfully after changing a few lines in updater-script.
Yesterday, I followed same method for Samsung Core GT-i8262. While flashing the rom, I got status 0 error. Then, I made almost 8 to 10 different rom zips with different alterations in updater-script; some copied from custom roms available for Core. Even after that I got status 0 error. I was highly frustrated with what was going on. I searched XDA for solution for updater-script errors and solutions etc. yesterday. But, I could not get one. Today morning, again I started my search on XDA and your post wished me Good Morning . Finally, I could flash / install modified Jelly Bean 4.1.2 on Core GT-i8262 (rooted, busy box, init.d, deodexed, debloated 84 apps) via odin. Breakthrough!
For Core 28bit .tar file worked; 32bit did not. Any idea why? Because as per my knowledge Quattro and Core are 32bit devices. Please correct me if I am wrong.
Thanks a Core

zooperaj said:
Hey Sheref, your suggestion rocked.
First, I used Assayyed Kitchen for modifying Jelly Bean 4.1.2 of my Samsung Quattro GT-i8552. I made rom zips and flashed modified rom successfully after changing a few lines in updater-script.
Yesterday, I followed same method for Samsung Core GT-i8262. While flashing the rom, I got status 0 error. Then, I made almost 8 to 10 different rom zips with different alterations in updater-script; some copied from custom roms available for Core. Even after that I got status 0 error. I was highly frustrated with what was going on. I searched XDA for solution for updater-script errors and solutions etc. yesterday. But, I could not get one. Today morning, again I started my search on XDA and your post wished me Good Morning . Finally, I could flash / install modified Jelly Bean 4.1.2 on Core GT-i8262 (rooted, busy box, init.d, deodexed, debloated 84 apps) via odin. Breakthrough!
For Core 28bit .tar file worked; 32bit did not. Any idea why? Because as per my knowledge Quattro and Core are 32bit devices. Please correct me if I am wrong.
Thanks a Core
Click to expand...
Click to collapse
Thanks bro.
32bit also not worked for me , idk why. Thanks for trying it. :angel: :angel::angel::angel:

hello, i want to repartition system partition of my galaxy core i8262,any help?
current system partition = 1.25 gb but i want above 1.80 gb or equal to 1.80 gb .

[email protected] said:
hello, i want to repartition system partition of my galaxy core i8262,any help?
current system partition = 1.25 gb but i want above 1.80 gb or equal to 1.80 gb .
Click to expand...
Click to collapse
Don't mess

Gautam Maini said:
Don't mess
Click to expand...
Click to collapse
you mean its impossible to do so

[email protected] said:
you mean its impossible to do so
Click to expand...
Click to collapse
Yes you can say . Repartition can lead to derious damage