Database Info

[Help]Can anyone port the CWM recovery to Micromax Canvas Doodle A111?

Hello guys,Can anyone port the CWM Recovery to Micromax canvas A111?
Note- it runs on Qualcomm MSM8225Q Snapdragon
can anyone please port it?i would be thankful to you.

Anyone reply...i have been checking 30-40 times per hour

Nobody interested to help ? :/

need some files.
charan12999 said:
Nobody interested to help ? :/
Click to expand...
Click to collapse
I too own doodle and frustated to see that there is not any custom recovery for this. We can try clockworkmod builder, but for that I need stock recovery.img and graphics.c files.

abhinav2hd said:
I too own doodle and frustated to see that there is not any custom recovery for this. We can try clockworkmod builder, but for that I need stock recovery.img and graphics.c files.
Click to expand...
Click to collapse
Please try bro..

Ya i already asked for a custom rom but nobody is replying for this post plz do something about a111
Sent from my A111 using xda premium

fb group
hey freinds, join this fb group for spreading the
development for Micromax Canvas Doodle
https://m.facebook.com/groups/482919518460893?view=group&_rdr

Doodle is fast and very good phone ...please port cwm

I'am trying to port it,but i just not able to do it because f my exams.

twrp
charan12999 said:
I'am trying to port it,but i just not able to do it because f my exams.
Click to expand...
Click to collapse
please someone test twrp recovery by ankur850 and report.
link:http://d-h.st/DJU
because i dont have my device now.

abhinav2hd said:
please someone test twrp recovery by ankur850 and report.
link:http://d-h.st/DJU
because i dont have my device now.
Click to expand...
Click to collapse
Anyone tested?or hall i test?

charan12999 said:
Anyone tested?or hall i test?
Click to expand...
Click to collapse
plss have anyone tested..????will this brick our device..???

It's not working. :-$
Sent via my Micromax A111 using Tapatalk 4

not any developers interested in A111.

cwm
deleted

axmanin said:
I used the same recovery as A116 canvas HD on my A116 doodle. though i haven't tried any features. you can see the points i observed and try out for yourself.
1. Cwm screen appears on boot into recovery
2. Phone properly boots on reboot (no bootloop)
3. gui of cwm works (navigating inside and out of menus work)
perhaps you may try and see if any options work. if you wish to do so you can download the A116 recovery from here http://forum.xda-developers.com/showthread.php?t=2167621
and update the recovery by downloading "MTK Mobileuncle tools" from play store and choosing the "update recovery" option.
best regards.
Axe
UPDATE:
1. mounting SD card option works with CWM. more updates as i try more options.
2. The number of features available seems less compared to usual cwm installs however it has basic options like install update from phone/sd.
3. partition sd card option not available
4. wipe cache partition available.
Click to expand...
Click to collapse
Does it really work dude??can you provide the links to the CWM you are talking about?

Negative
charan12999 said:
Does it really work dude??can you provide the links to the CWM you are talking about?
Click to expand...
Click to collapse
It almost brick mine

axmanin said:
I used the same recovery as A116 canvas HD on my A116 doodle. though i haven't tried any features. you can see the points i observed and try out for yourself.
1. Cwm screen appears on boot into recovery
2. Phone properly boots on reboot (no bootloop)
3. gui of cwm works (navigating inside and out of menus work)
perhaps you may try and see if any options work. if you wish to do so you can download the A116 recovery from here http://forum.xda-developers.com/showthread.php?t=2167621
and update the recovery by downloading "MTK Mobileuncle tools" from play store and choosing the "update recovery" option.
best regards.
Axe
UPDATE:
1. mounting SD card option works with CWM. more updates as i try more options.
2. The number of features available seems less compared to usual cwm installs however it has basic options like install update from phone/sd.
3. partition sd card option not available
4. wipe cache partition available.
Click to expand...
Click to collapse
are u completely mad, cwm from a mediatek is working on qualcomm, that's too flashed via mobile uncle tools which is only mtk devices. stop posting ****..

deleted

deleted

[Q] (HELP) Micromax A110 stuck on Bootscreen- Rom-Canvas 5.1

Hi Guys,
Before you guys shoot me down, Just wanted to say, i searched XDA for 2 hours, couldn't find the exact reply. And a few topics are open since a year with no reply, So thinking that someone will reply to me. I am opening this "Need Help" Ticket.
I have a micromax a110 with 4.04 - as i got no update ever! So what i did was
Rooted the phone properly as per the procedure.
Downloaded the CWM 6.0.4.9 recovery [selinux] and flashed it with Recovery Link :http://forum.xda-developers.com/mic...opment/recovery-cwm-6-0-4-9-recovery-t2789175
Downloaded the [ROM][4.2.2] CanvaS5™ V1.1 Link: http://forum.xda-developers.com/showthread.php?t=2775553
After flashing the rom properly, when i reboot the phone, it gets stuck on the boot screen forever. Am i doing something wrong? Should i have flashed a kernel? or something. Please note, i am not looking into going back to stock, as i have moved into the dark side of the root world .
Since i have just been a Read-only user of XDA for all this while(more than a year), with no posts ever, i cant request for help on the Developer Thread as it requires privileges. Requesting someone to please post this topic there so i can speak to the dev or please give me a answer to help me:silly:

4.2.2 won't support SELinux
kunalsaddar said:
Hi Guys,
Before you guys shoot me down, Just wanted to say, i searched XDA for 2 hours, couldn't find the exact reply. And a few topics are open since a year with no reply, So thinking that someone will reply to me. I am opening this "Need Help" Ticket.
I have a micromax a110 with 4.04 - as i got no update ever! So what i did was
Rooted the phone properly as per the procedure.
Downloaded the CWM 6.0.4.9 recovery [selinux] and flashed it with Recovery Link :http://forum.xda-developers.com/mic...opment/recovery-cwm-6-0-4-9-recovery-t2789175
Downloaded the [ROM][4.2.2] CanvaS5™ V1.1 Link: http://forum.xda-developers.com/showthread.php?t=2775553
After flashing the rom properly, when i reboot the phone, it gets stuck on the boot screen forever. Am i doing something wrong? Should i have flashed a kernel? or something. Please note, i am not looking into going back to stock, as i have moved into the dark side of the root world .
Since i have just been a Read-only user of XDA for all this while(more than a year), with no posts ever, i cant request for help on the Developer Thread as it requires privileges. Requesting someone to please post this topic there so i can speak to the dev or please give me a answer to help me:silly:
Click to expand...
Click to collapse
That Recovery you flashed is SELinux enabled and is not supported by 4.1-4.2.2 Jelly bean Roms so you have got boot loop . You can try other recovery or flash higher android version roms .
---------- Post added at 05:20 PM ---------- Previous post was at 05:06 PM ----------
I think this CWM recovery will work with your downloaded rom
http://forum.xda-developers.com/showthread.php?t=2204785
And remember before flashing anything clear data,cache and dalvik-cache.
Happy Flashing

Thanks guys for the reply, let me flash the above CMW and check. Will revert shortly

How to i put the CMW in the phones root directory now for it to flash? The phone doesnt start so cant access it through usb. Any ideas?

kunalsaddar said:
How to i put the CMW in the phones root directory now for it to flash? The phone doesnt start so cant access it through usb. Any ideas?
Click to expand...
Click to collapse
Since your phone is not booting you should use SP Flash tool on PC to flash the recovery. Here's a guide to SP Flash tool:
gizbeat.com/3774/how-to-flash-cwm-without-root-with-sp-flash-tool/
Hope it works .

4shreyas said:
Since your phone is not booting you should use SP Flash tool on PC to flash the recovery. Here's a guide to SP Flash tool:
gizbeat.com/3774/how-to-flash-cwm-without-root-with-sp-flash-tool/
Hope it works .
Click to expand...
Click to collapse
Thanks dude, for your quick response. I wont be able to confirm on this today as setting up SP Flash tool is just too hard. It talks about some scatter file. I dont know how to make that.Let me get a grip on that, will confirm then. Thanks for the help anyhow

kunalsaddar said:
Thanks dude, for your quick response. I wont be able to confirm on this today as setting up SP Flash tool is just too hard. It talks about some scatter file. I dont know how to make that.Let me get a grip on that, will confirm then. Thanks for the help anyhow
Click to expand...
Click to collapse
Great , Here the link for official Jelly bean update for your device by micromax as said in that post . I think that file has scatter file (it contains your phone's storage partition info ) . There is also guide to flash using SP Flash tool . Use it .
http://forum.xda-developers.com/showthread.php?t=2209288
Hit Thanks if it works

4shreyas said:
Great , Here the link for official Jelly bean update for your device by micromax as said in that post . I think that file has scatter file (it contains your phone's storage partition info ) . There is also guide to flash using SP Flash tool . Use it .
http://forum.xda-developers.com/showthread.php?t=2209288
Hit Thanks if it works
Click to expand...
Click to collapse
Hey shreyas,
I have tried it with SP tools, it doesnt work, man. Drivers, Softwares, updated all of them, i keep doing everything. I know i am doing something wrong, but its hard to identify, spent like the entire night trying to make it. Can't i get a flashable zip for CMW instead or know that on which rom did the CWM selinux work on? This boot looping is now killing :fingers-crossed:

Finally, i found a way, thanks 4Shreyas for all the help. Gave me knowledge and helped me identify the errors.
I couldn't flash the rom or the cmw recvoery through the pc as the drivers for SP tools never worked on my Win 8.1 x64. Finally applied the stock jellybean file from http://forum.xda-developers.com/showthread.php?t=2160609 . It updated my CMW since that was the problem i was stuck in bootloop.
After that i flash the phone with my desired rom.
In the end, all good:laugh:

kunalsaddar said:
Finally, i found a way, thanks 4Shreyas for all the help. Gave me knowledge and helped me identify the errors.
I couldn't flash the rom or the cmw recvoery through the pc as the drivers for SP tools never worked on my Win 8.1 x64. Finally applied the stock jellybean file from http://forum.xda-developers.com/showthread.php?t=2160609 . It updated my CMW since that was the problem i was stuck in bootloop.
After that i flash the phone with my desired rom.
In the end, all good:laugh:
Click to expand...
Click to collapse
Cheers bro !!!! Yes getting MTK drivers in win 8 is a challenging task and as SELinux CWM recovery is concerned you can flash 4.3.x and 4.4.x roms . Google it , if any rom is available then use that recovery to flash those roms .
Enjoy !!

4shreyas said:
Cheers bro !!!! Yes getting MTK drivers in win 8 is a challenging task and as SELinux CWM recovery is concerned you can flash 4.3.x and 4.4.x roms . Google it , if any rom is available then use that recovery to flash those roms .
Enjoy !!
Click to expand...
Click to collapse
True that, i actually gave up trying to find the drivers. There arnt any 4.3 or 4.4.x roms released for mmx. When they do, will surely apply the Selinux CWM. Thanks for all the help .:good:

[Q] accidentally Factory resetted my pre rooted micromax a110

Guys
I have a prerooted MMX a110 .when I was changing some settings in gravity box my ROM got stuck and I factory reset ted my phone .now I lost root access and also cwm recovery when I try to boot into recovery it shows that android is upgrading type progress bar and again resets my phone.. when I tried to root it again the so tool flash is not detecting my device (I get the plugged and then immediately unplugged sounds continuously ).I have a custom ROM installed with no access to army of my contacts and am not able to make any calls .pease help my guys .. PLEASE GIVE ME IF SUGGESTIONS .:crying:

use mobileuncletool from play store and try to install CWM than flash custome rom

kundan.lohar said:
use mobileuncletool from play store and try to install CWM than flash custome rom
Click to expand...
Click to collapse
thank you for your suggestion
i got cwm(now) but it shows i am not rooted and when i try to flash a rom it shows status 7 error.now i have wiped my data and it is not allowing me to flash any rom. :crying:
will this be corrected if i reflash cwm please reply

TEKS299 said:
thank you for your suggestion
i got cwm(now) but it shows i am not rooted and when i try to flash a rom it shows status 7 error.now i have wiped my data and it is not allowing me to flash any rom. :crying:
will this be corrected if i reflash cwm please reply
Click to expand...
Click to collapse
you need to first root your phone i suggest bin4ry by sagarwep for rooting i use it.
after that you get root access
You can do whatever you want to do man.

kundan.lohar said:
you need to first root your phone i suggest bin4ry by sagarwep for rooting i use it.
after that you get root access
You can do whatever you want to do man.
Click to expand...
Click to collapse
Thank u for it suggestion tried it and got my phone back to normal :highfive::good::laugh:

Don't just say thanks hit thanks
[email protected]

Micromax Unite A092 Custom ROM [Cyanogen Mod 11]

CyanogenMod 11 for Micromax A092
Ported by darshan1205 (Darshan Manjrekar)
Bugs Known
2.99 GB partition not detected
Move to SD not available
Flash KitKat Firmware via fast boot to prevent FCS
Hit Thanks:good:
Link:https://www.4shared.com/zip/LBaTW5Lice/CM11-20150512-UNOFFICIAL-UNITE.html

Screen shots

System UI Crashes
when i installed it worked fine for a little bit of time but after that it says system ui has stopped working and if i open security settings it says settings has stopped working

prajwal2001 said:
when i installed it worked fine for a little bit of time but after that it says system ui has stopped working and if i open security settings it says settings has stopped working
Click to expand...
Click to collapse
Flash Kitkat Firmware then flash this ROM ...
Sent from my YU5510 using Tapatalk

darshan1205 said:
Flash Kitkat Firmware then flash this ROM ...
Sent from my YU5510 using Tapatalk
Click to expand...
Click to collapse
Where can I get kitkat firmware (first time installing a ROM )

prajwal2001 said:
Where can I get kitkat firmware (first time installing a ROM )
Click to expand...
Click to collapse
Download this KitKat Firmware of Moto A310 [a rebrand of Micromax A092] & flash it through fastboot
Link: https://drive.google.com/file/d/0B6oh79olFl8jSWk0dTRQcUJKYkE/view?usp=drivesdk
Sent from my YU5510 using Tapatalk

darshan1205 said:
Download this KitKat Firmware of Moto A310 [a rebrand of Micromax A092] & flash it through fastboot
Sent from my YU5510 using Tapatalk
Click to expand...
Click to collapse
Ok I fastbooted and installed kitkat firmware now i just have to install the rom right
---------- Post added at 08:26 AM ---------- Previous post was at 07:48 AM ----------
It Worked Thanks Alot!!!! Bhai:good

The ROM is working smoothly but the viberations for keyboard home and back button are not working

please help,
I flashed my phone by vroot. now Imei is showing null. no internal sd card is detected in phone but while attaching it with computer it shows.2.99 Gb available.
how to recover all those things again if i had not made any recovery for it
while updating in recovery mode everytime it shows verification failed installed aborted so updated version are not installing.
Plz Plz Plz help

pradeepkurmi said:
please help,
I flashed my phone by vroot. now Imei is showing null. no internal sd card is detected in phone but while attaching it with computer it shows.2.99 Gb available.
how to recover all those things again if i had not made any recovery for it
while updating in recovery mode everytime it shows verification failed installed aborted so updated version are not installing.
Plz Plz Plz help
Click to expand...
Click to collapse
First download the KitKat firmware from this link https://drive.google.com/file/d/0B6oh79olFl8jSWk0dTRQcUJKYkE/view?usp=drivesdk then extract it using winrar and open the folder fastboot download in it and double click on 8x10_fastboot_all_images and turn off your phone and then press and hold power button+volume down when you see the micromax logo connect it to your computer with usb and it flash kitkat on it then flash the cm11 rom via recovery

Please can you contact me via email. My email id is [email protected]
and my whastapp no. is 9699961332

I know how to flash Via recovery. Open Recovery Mode and select install from Sd card then select any update.zip but i dont know how to flash kitkat on it. Plz Help. Also i cannot find cm11 rom in this zip.

got it i had installed custom rom via fastboot but now wifi is not working

This link is not working please repair it or provide a new one

i done flash of your rom then i cant open my sequrity setting i.e, it was showing me "unfortunately, setting has been stopped"... Then i saw yr firmware that is something stuff fix kk.. i dont it same.. it all finished successful. the real part is now i cant open my recovery screen else the boot screen is in loop.. so give me some idea stuff which repair this thing. HELP!! And if im pressing volume with power.. it again and again restart please help: Anyways thanks brother.. now its Fine .. Thanks a ton.. can u uploads more updated rom like marshmallow??

link not working
on clicking the download option it displays invalid signature. please update the link

My phone gets stuck at boot image nothing happens in both phone and PC......
It shows waiting for device in PC and mmx liogo in phone forever

Alcatel one touch flash 6042d stock ROM

Hi i am posting this thread because i couldn't find any good tutorial that helped you for flash the stock Rom of Alcatel one touch flash 6042d
THINGS BEFORE YOU REQUIRED TO FLASH STOCK ROM OF ALCATEL ONE TOUCH FLASH 6042D
1.Download the stock ROM(the link is given below)
2.Download the flash Tool(Given below)
3.Usb driver(Given below)
4.A window PC
5.Patience
6.Last and very important some Mind.
STEP:-1
1.First install the driver to your pc which is necessary.Without installing the necessary driver processing further proceeding is only waste of time.If you do not install driver correctly then you do not install the rom correctly.
2.Second,Check that any another usb driver related to your mobile is not installed on your PC using USB DEVIEW(Download it from link below).If you have any type of driver installed related to Mt65xx the uninstall it or related to any type of android driver uninstall it.I am providing the link of youtube see there how to install the driver. (https://www.youtube.com/watch?v=PAxTCvRmlio).
STEP :-2(HOW TO INSTALL DRIVER)
1. After uninstalling all the related driver to your mobile and other mobile, proceed further.
2. Switch off your mobile phone and go to device manager in PC (In window 8.1 right click on my pc or my computer and then select manage, another procedure is from control panel)
3. Connect your mobile to PC in switch off condition and in device manger PORT SECTION your device is detected.You have only 5 second to selecting on your PC(in package driver are given, install acc. to your PC 32/64 bit) so do Hurry.When you are selecting the driver your mobile start charging don't worry select the driver folder.If you have problem in installing driver like digital signature then search google how to disable it and install it.
4. You think that why we are selecting the driver to port section it is because the mobile have only 5 seconds to start charging in off condition.In those 5 seconds if any data is not send to mobile the mobile start itself.
STEP:-3(LAST STEP to flashing rom)
1. This is easy step.First you have to open the sp flash tool and select flashtool.exe.
2. After opening the sp flash tool select the scatter text file which is in the package of ROM.
3.Select the scatter text file.
4. Then click on download button.
5. Be sure that you check that the mobile phone is in switch off condition and then connect your mobile to your PC.
6. Your mobile is detected and flashing start and takes few minutes.After successful flashing ok sign comes,close it.
7. Remove your device and on it.First booting takes 6-7 minutes.If you find that mobile is stucked at animated alcatel one touch flash boot logo and vibrating again and again .Then go to recovery and clear cache and start it.
DOWNLOAD STOCK ROM of ALCATEL ONE TOUCH FLASH 6042D(http://www.mediafire.com/download/a..._one_touch_flash_stock_rom_and_flash_tool.zip)
DOWNLOAD USB DEVIEW (http://www.mediafire.com/download/5urdr4981m5codw/USBDEVIEW.zip )
If any problem post it.
If you like my work, please HIT Thanks Button​

Good job done sir..... After long time got success ...

Really interesting Thank you for this Information! :good:

Flashed but it doesn't look like flashed.
I flashed the ROM. But unfortunately, It didn't work. The process was complete 100%. But when I started the phone, After Alcatel Onetouch Smart Move boot animation screen, there was a screen showing -: "Android is Upgrading. Optimizing Apps".... and when it started, every app was already there.
My phone was rooted earlier. But superSU says it isn't rooted. Also when I go to system updates, it says "Device has detected root". Did you root your mobile before dumping this ROM???

After flashing your previous apps installed in your mobile is still there because the flash process does not successfully completed.Try again to reflash ROM.
And this ROM is actually updated so that you don't find system update.

..

Flashed But nothing is changed
I did exactly as you posted and flashing completed successfully, but nothing is changed and all my old apps are there.

gamerWeirdo said:
I did exactly as you posted and flashing completed successfully, but nothing is changed and all my old apps are there.
Click to expand...
Click to collapse
Try to flash this ROM through this version of SP flash tool ( http://www.4shared.com/rar/eRE4YvIsba/SP_Flash_Tool_v313360198.html#)
If it does not work then SELECT FORMAT ALL + DOWNLOAD in SP flash tool.Then flash ROM but backup your imei before doing this.

Well, I didn't do reflash. But I did a factory reset after flashing and it's okay now. System update also says that your phone is upto date. What I think the reason for that is during sp tool flashing, the check on "user data" was not there. So user data remained the same from previous.. What do you think?
And the link for ROM you gave in the above post, what's the difference?

hvsharma said:
Well, I didn't do reflash. But I did a factory reset after flashing and it's okay now. System update also says that your phone is upto date. What I think the reason for that is during sp tool flashing, the check on "user data" was not there. So user data remained the same from previous.. What do you think?
And the link for ROM you gave in the above post, what's the difference?
Click to expand...
Click to collapse
I think you are right bro.
Sent from 6042D using XDA Free mobile app

Hi,
After following above steps my IMEI is shown as Invalid.. Pls hlp
---------- Post added at 12:12 PM ---------- Previous post was at 11:57 AM ----------
Guys I had lost my IMEI after using this method. luckily I had cwm back up so i re-flashed cwm back up and than flashed this stock rom again without enabling data tick and everything is cool now

jhalife said:
Hi,
After following above steps my IMEI is shown as Invalid.. Pls hlp
---------- Post added at 12:12 PM ---------- Previous post was at 11:57 AM ----------
Guys I had lost my IMEI after using this method. luckily I had cwm back up so i re-flashed cwm back up and than flashed this stock rom again without enabling data tick and everything is cool now
Click to expand...
Click to collapse
You mean USRDATA ?

AmrikSingh said:
You mean USRDATA ?
Click to expand...
Click to collapse
Yes. God Knows how restoring CWM back up and than reflashing brought my IMEI back bt m happy thanks for the ROM

jhalife said:
Yes. God Knows how restoring CWM back up and than reflashing brought my IMEI back bt m happy thanks for the ROM
Click to expand...
Click to collapse
Bro but the ROM i uploaded does not have USRDATA so that by default USRDATA it is unticked.And you are telling that you untick the USRDATA and the flash the ROM ?
:angel::angel:

yaa but I hd selected Download+format all so everythinn hd got tick in 1st attemp anyways now it is resolved

Please, can somebody tell me if this Rom has spanish language? Thank you

Hi Amrik, Today I happened to do factory reset of my phone which was updated using your ROM. unfortunately just by using factory data reset in cwm option I have lost my In. Please help me out. I had taken cwm back up but that back up is not getting flashed I get an error that unable to restore data! and my phone is without imei. any help would be appreciated.
Finally fixed it again. Luckily I had cwm back up of 6months old from which i restored data partition using advanced restore in cwm and my IMEI is back
To all the crowd here it is recommended to have cwm back up before flashing this stock rom as cwm back up after flashign this stock rom fail to flash data partition & mind you MTK droid tools, mobile uncle mtk all fail to restore IMEI.
So please take a back up before of entire rom and dat apartition specially which can save you big time later.

can you give new link, i can't download.. please help

Pls provide a working link, is the stock roms stable? thanks

Help! Link not working.
Sir,
The download link for the ROM seems to be broken. Please help.