Database Info

[Q] [help] I may have bricked my Micromax a110

I successfully installed the [IndiAndroid](http://forum.xda-developers.com/showthread.php?t=2000453&page=7) through CWM (it showed the words successful and completed) but now when I boot into normal mode it just hangs at the start screen "SUPERFONE CANVAS 2".
I don't know how else to get to the recovery mode for this phone [Micromax a110] except through MobileUncle app but the phone won't start. Any help appreciated...

iBrickYouNot said:
I successfully installed the [IndiAndroid](http://forum.xda-developers.com/showthread.php?t=2000453&page=7) through CWM (it showed the words successful and completed) but now when I boot into normal mode it just hangs at the start screen "SUPERFONE CANVAS 2".
I don't know how else to get to the recovery mode for this phone [Micromax a110] except through MobileUncle app but the phone won't start. Any help appreciated...
Click to expand...
Click to collapse
Go into recovery mode by first switching off your device. Then press volume up, down and power button all together to go into recovery when light flashes. Then you can try flashing stock rom and see what happens after that
OR
follow this guide
http://d-h.st/pt2

iBrickYouNot said:
I successfully installed the [IndiAndroid](http://forum.xda-developers.com/showthread.php?t=2000453&page=7) through CWM (it showed the words successful and completed) but now when I boot into normal mode it just hangs at the start screen "SUPERFONE CANVAS 2".
I don't know how else to get to the recovery mode for this phone [Micromax a110] except through MobileUncle app but the phone won't start. Any help appreciated...
Click to expand...
Click to collapse
Hey Just Go to Recovery Mode Again and Do a Data Reset...
Thats all..

If you have bricked your phone you can flash it using sp flash tool with the stock rom.

hello everybody
sorry if have done anything wrong by starting or posting in wrong thread.......really apologies for that...
I have purchased micromax a110 and every thing was fine with that phone.i even flashed it to v2 ROM and things were fine even then(only problem i observed was with display having light faded up images of previous things displayed....don't know but feel may be due to screen refresh rate)
Yesterday i happened to find [MICROMAX A110] ROM of Mobistel Cynus T2 http://forum.xda-developers.com/showthread.php?t=2060482
did as things were mentioned in post and everything was good and smooth
i then thought of reverting back to V2 ROM and flashed A110 with Sp flash tool,flashed correctly and phone was running normally........but i saw the options in sp flash tool and selected memory test option and selected all options and started the test after test finished i was not able to start the phone........ i then again flashed with v2 ROM and it started but iam getting invalid imei and NVram warning as WiFi network please help me to resolve this ......phones working properly but shows imei invalid and WiFi network i tried to root but cant even root the phone now

I had the same probelm!!
iBrickYouNot said:
I successfully installed the [IndiAndroid](http://forum.xda-developers.com/showthread.php?t=2000453&page=7) through CWM (it showed the words successful and completed) but now when I boot into normal mode it just hangs at the start screen "SUPERFONE CANVAS 2".
I don't know how else to get to the recovery mode for this phone [Micromax a110] except through MobileUncle app but the phone won't start. Any help appreciated...
Click to expand...
Click to collapse
ALL THE ABOVE METHODS DONT WORK!! I Bricked my phone to..so read on!!
Okay so here is what you have to do!!
1.Flash yourself into CWM recovery& create a backup of your file data as this method will erase everything!!
2.Enter into Advanced options>Mount SD card
3.Copy whichever ROM package you have pre-installed into the SD CARD which is mounted(In my case RADEON ROM*)
And now go to Install option from SD Card>Radeon Rom..and Voila its back from the DEAD!!
P.S: Backup is 100%essential & I'm not liable if you do not backup your data using CWM
Cheers!!

mayur.3.92 said:
hello everybody
sorry if have done anything wrong by starting or posting in wrong thread.......really apologies for that...
I have purchased micromax a110 and every thing was fine with that phone.i even flashed it to v2 ROM and things were fine even then(only problem i observed was with display having light faded up images of previous things displayed....don't know but feel may be due to screen refresh rate)
Yesterday i happened to find [MICROMAX A110] ROM of Mobistel Cynus T2 http://forum.xda-developers.com/showthread.php?t=2060482
did as things were mentioned in post and everything was good and smooth
i then thought of reverting back to V2 ROM and flashed A110 with Sp flash tool,flashed correctly and phone was running normally........but i saw the options in sp flash tool and selected memory test option and selected all options and started the test after test finished i was not able to start the phone........ i then again flashed with v2 ROM and it started but iam getting invalid imei and NVram warning as WiFi network please help me to resolve this ......phones working properly but shows imei invalid and WiFi network i tried to root but cant even root the phone now
Click to expand...
Click to collapse
Write ur imei by own.. how plz visit dis linkandroidforums.com/a75-all-things-root/542716-how-unbrick-a75-if-bricked-using-recovery.html
Sent from my Cynus T2 using xda app-developers app

Thanx but what about no am error being showed up as open wifi network

plz help stuck at recoverymode
imridul said:
ALL THE ABOVE METHODS DONT WORK!! I Bricked my phone to..so read on!!
Okay so here is what you have to do!!
1.Flash yourself into CWM recovery& create a backup of your file data as this method will erase everything!!
2.Enter into Advanced options>Mount SD card
3.Copy whichever ROM package you have pre-installed into the SD CARD which is mounted(In my case RADEON ROM*)
And now go to Install option from SD Card>Radeon Rom..and Voila its back from the DEAD!!
P.S: Backup is 100%essential & I'm not liable if you do not backup your data using CWM
Cheers!!
Click to expand...
Click to collapse
but if when i go to recovery mode it just hangs how can i backup or tell me how to flash please tell me

saadderaiya said:
but if when i go to recovery mode it just hangs how can i backup or tell me how to flash please tell me
Click to expand...
Click to collapse
Flash the Stock V2 via the SP Tool.
http://forum.xda-developers.com/showthread.php?t=1982587 [TUT]MTK Android (Sp flash tool ) tutorial
http://forum.xda-developers.com/showthread.php?t=1960080 check the first post for the Stock V2 ROM

similar issue ,
Let me try what VipinKC says

un brick
ravee1010 said:
similar issue ,
Let me try what VipinKC says
Click to expand...
Click to collapse
install stock rom by sp flash tool you phone will return to normal link is in down
http://forum.xda-developers.com/showthread.php?t=2167244

vjdsivakumar said:
install stock rom by sp flash tool you phone will return to normal link is in down
http://forum.xda-developers.com/showthread.php?t=2167244
Click to expand...
Click to collapse
Yes done already!
I put stock JB
rooted it
and installed LEWA v4 by seshu .........it rocks
Now am bulk installing apps .......

nice
ravee1010 said:
Yes done already!
I put stock JB
rooted it
and installed LEWA v4 by seshu .........it rocks
Now am bulk installing apps .......
Click to expand...
Click to collapse
nice work enjoy

Bricked a110
Guyz, i recently installed CWM on my a110, but somhow while testing the features, i installed 12 mp patch and rebooted the phone. But it got stuck on the boot screen. And then i again went to CWM and done all this:
Fomat Data
Format System
Format Cache
And now its just hanged on to boot screen and am afraid that i have just done the biggest mistake.
Any help will be very thankful..
Plzz Reply Fast...

Similar but Different Problem
I may have a similar problem, big bros. Please check this thread. Sorry for bothering. I really need help.
http://forum.xda-developers.com/showthread.php?p=53004045

use
saadderaiya said:
but if when i go to recovery mode it just hangs how can i backup or tell me how to flash please tell me
Click to expand...
Click to collapse
SP tool and flash stock rom through sp tools

If u have nandroid backtup then restore it
Sent from my A250 SUVI ROM v16 AURA using XDA Premium 4 mobile app

[solved] mtk 6589, sim not detected, baseband & radio loss, invalid imei. After flas

[solved] mtk 6589, sim not detected, baseband & radio loss, invalid imei. After flas
Hello.
I recently bought a Chinese phone MTK6589 (XYZ X1).
The first thing I did was do a full backup with MTKDroidTools.
When you upgrade to the latest official ROM and on the phone, SIM card detected stopped.
Update with backup from SP Flash Tools, but the SIM was not detected.
So as it was under warranty I returned the phone and switch to another.
I got the following phone MTK6589T (Pomp W99), again made ​​an initial backup.
Install TWRP recovery and restart, same problem. Sim undetected.
When trying to install flash backup with SP Tools, the program did not detect the device.
So I had the phone and not the sim calls undetected Radio Baseband & empty and invalid IMEI.
To fix this we need to have previously made a backup with MtkDroidTools and convert it to SP Flash Tool If you do not have the backup, will have to look to find a full ROM for our device.
When trying to flash with SP, giving Error 3013 and did not recognize the device, the solution for this is only the first flash preloader and then again perform full flashing.
I did so but the phone was the same, so keep a thousand forums looking for the solution without success.
So you lost mobile giving, what I've done is a full format from SP flash tool (Format option), to leave completely empty.
And then flash the backup made ​​with MtkDroidTools but scatter loading in the sec_ro and userdata.nvram.only
When you turn on the phone, this recognized the SIM! But was invalid IMEI.
So I went into engineer mode (keypad, * # * # 3646633 # * # *)
CDS info
Radio Settings
Phone 1: Insert the command at + egmr = 1.7 "IMEI1"
Phone 2: Insert the command at + egmr = 1.10 "imei2"
When you restart the phone and everything worked fine.
A greeting

Do you have the complete rom for pomp w99? Would you please post it here? Another thing, what cwm/TWRP souls I use?
Thanks!

cherry mobile apollo no service detected after flashing
sir do u have a full rom for this model?

Can i used for mtk 6575..?
Because i have same problemo.

Alerba13 said:
Can i used for mtk 6575..?
Because i have same problemo.
Click to expand...
Click to collapse
Same for me, i try a lot of method but no radio no IMEI

yseku said:
Hello.
I recently bought a Chinese phone MTK6589 (XYZ X1).
The first thing I did was do a full backup with MTKDroidTools.
When you upgrade to the latest official ROM and on the phone, SIM card detected stopped.
Update with backup from SP Flash Tools, but the SIM was not detected.
So as it was under warranty I returned the phone and switch to another.
I got the following phone MTK6589T (Pomp W99), again made ​​an initial backup.
Install TWRP recovery and restart, same problem. Sim undetected.
When trying to install flash backup with SP Tools, the program did not detect the device.
So I had the phone and not the sim calls undetected Radio Baseband & empty and invalid IMEI.
To fix this we need to have previously made a backup with MtkDroidTools and convert it to SP Flash Tool If you do not have the backup, will have to look to find a full ROM for our device.
When trying to flash with SP, giving Error 3013 and did not recognize the device, the solution for this is only the first flash preloader and then again perform full flashing.
I did so but the phone was the same, so keep a thousand forums looking for the solution without success.
So you lost mobile giving, what I've done is a full format from SP flash tool (Format option), to leave completely empty.
And then flash the backup made ​​with MtkDroidTools but scatter loading in the sec_ro and userdata.nvram.only
When you turn on the phone, this recognized the SIM! But was invalid IMEI.
So I went into engineer mode (keypad, * # * # 3646633 # * # *)
CDS info
Radio Settings
Phone 1: Insert the command at + egmr = 1.7 "IMEI1"
Phone 2: Insert the command at + egmr = 1.10 "imei2"
When you restart the phone and everything worked fine.
A greeting
Click to expand...
Click to collapse
@yseku
Would you please post here your mtkdroidtools backup for pomp w99?
Mine was giving error so I´ve deleted it... now I have the same problem as yours and don´t have a backup...
Please please please help...

Hello,
Basically this is the procedure I followed.
I'm uploading the backup to MEGA, it takes about 2 hours ...
I think it should work on any MTK (6589,6575...)
Greetings

yseku said:
Hello,
Basically this is the procedure I followed.
I'm uploading the backup to MEGA, it takes about 2 hours ...
I think it should work on any MTK (6589,6575...)
Greetings
Click to expand...
Click to collapse
@yseku, thank you so much for your good will and fast response! Will be waiting for the link with the mtkdroidtools POMP W99 complete backup...
I own you one... Please fell free to ask for help if you need anything...

yseku said:
Hello,
Basically this is the procedure I followed.
I'm uploading the backup to MEGA, it takes about 2 hours ...
I think it should work on any MTK (6589,6575...)
Greetings
Click to expand...
Click to collapse
Using MobileUncle Tools app I have tried to update my recovery, I searched and downloaded a recovery using mobile uncle and installed it, again, using mobile uncle. I now don't have a recovery and can't find any signal, on mobile uncle I have it shows I have No IMEI, no internet no sim detected radio loss all gone and your method above does not work unfortunatly as it said Write Failed, Any ideas?

I cant post external links on the forum, until I have 10 posts...
No problem... Upload it as image...

ZakBrindle said:
Using MobileUncle Tools app I have tried to update my recovery, I searched and downloaded a recovery using mobile uncle and installed it, again, using mobile uncle. I now don't have a recovery and can't find any signal, on mobile uncle I have it shows I have No IMEI, no internet no sim detected radio loss all gone and your method above does not work unfortunatly as it said Write Failed, Any ideas?
Click to expand...
Click to collapse
It must be the error you´re getting... Try other versions of sp flash tool... Put back your previous recovery with mobileuncletools if you can boot to android OS...
yseku said:
posting...
Click to expand...
Click to collapse
Ready for downloading as soon as you post!

eteles said:
It must be the error you´re getting... Try other versions of sp flash tool... Put back your previous recovery with mobileuncletools if you can boot to android OS...
Click to expand...
Click to collapse
I can boot to my Android OS, how do i revert to an old recovery? Keeping in mind i currently have no recovery :/

eteles said:
It must be the error you´re getting... Try other versions of sp flash tool... Put back your previous recovery with mobileuncletools if you can boot to android OS...
Ready for downloading as soon as you post!
Click to expand...
Click to collapse
Link on previous post

ZakBrindle said:
I can boot to my Android OS, how do i revert to an old recovery? Keeping in mind i currently have no recovery :/
Click to expand...
Click to collapse
You have to have a backup of your old recovery.img... Put it in the root of sdcard, open mobileuncle, recovery update, you will see the file there, select and confirm.

yseku said:
I cant post external links on the forum, until I have 10 posts...
No problem... Upload it as image...
Click to expand...
Click to collapse
I will try that now, thank you

yseku said:
Link on previous post
Click to expand...
Click to collapse
Thank you so much!!
Here´s the link for the complete MTKDroidTolls backup for POMP W99 that you uploaded: https://mega.co.nz/#!Yw1RHCjD!ZeGCQAZ_luRD1B9XPCqfdASOoBZYGvmVF5L4633hwgs
Just to help other people with different problems, here´s the link for the CWM flashable stock ROM for POMP W99 (thanks to @tribual): http://uploaded.net/file/7ie3n8s5
and here´s the link for CWM recovery 6.0.4.4 for POMP W99 (thanks to @tribual) http://www60.zippyshare.com/v/62999584/file.html

eteles said:
You have to have a backup of your old recovery.img... Put it in the root of sdcard, open mobileuncle, recovery update, you will see the file there, select and confirm.
Click to expand...
Click to collapse
I dont have a backup of my old recovery :/ lost it accidently as usb currupt
eteles said:
Thank you so much!!
Here´s the link for the complete MTKDroidTolls backup for POMP W99 that you uploaded: https://mega.co.nz/#!Yw1RHCjD!ZeGCQAZ_luRD1B9XPCqfdASOoBZYGvmVF5L4633hwgs
Just to help other people with different problems, here´s the link for the CWM flashable stock ROM for POMP W99 (thanks to @tribual): http://uploaded.net/file/7ie3n8s5
Click to expand...
Click to collapse
Downloading Now

ZakBrindle said:
I dont have a backup of my old recovery :/ lost it accidently as usb currupt
Downloading Now
Click to expand...
Click to collapse
I´ve just posted another link with CWM recovery... Tested and working... Try this one if you want CWM... Or you can download the complete ROMs and extract the recovery.img file

eteles said:
I´ve just posted another link with CWM recovery... Tested and working... Try this one if you want CWM... Or you can download the complete ROMs and extract the recovery.img file
Click to expand...
Click to collapse
Sorry probably a dumb question, one ive downloaded the
POMP_W99_130807_backup_130922-123036 file
what do i do?

ZakBrindle said:
Sorry probably a dumb question, one ive downloaded the
POMP_W99_130807_backup_130922-123036 file
what do i do?
Click to expand...
Click to collapse
unzip it, find recovery.img file, put it in the root of the sd card, open mobile uncle tools, recovery update, select the file and install...
Like this you will get your stock recovery back...
To restore the baseband and imei it´s more complex... please read previous posts (page 1)

[Q] (HELP) Micromax A110 stuck on Bootscreen- Rom-Canvas 5.1

Hi Guys,
Before you guys shoot me down, Just wanted to say, i searched XDA for 2 hours, couldn't find the exact reply. And a few topics are open since a year with no reply, So thinking that someone will reply to me. I am opening this "Need Help" Ticket.
I have a micromax a110 with 4.04 - as i got no update ever! So what i did was
Rooted the phone properly as per the procedure.
Downloaded the CWM 6.0.4.9 recovery [selinux] and flashed it with Recovery Link :http://forum.xda-developers.com/mic...opment/recovery-cwm-6-0-4-9-recovery-t2789175
Downloaded the [ROM][4.2.2] CanvaS5™ V1.1 Link: http://forum.xda-developers.com/showthread.php?t=2775553
After flashing the rom properly, when i reboot the phone, it gets stuck on the boot screen forever. Am i doing something wrong? Should i have flashed a kernel? or something. Please note, i am not looking into going back to stock, as i have moved into the dark side of the root world .
Since i have just been a Read-only user of XDA for all this while(more than a year), with no posts ever, i cant request for help on the Developer Thread as it requires privileges. Requesting someone to please post this topic there so i can speak to the dev or please give me a answer to help me:silly:

4.2.2 won't support SELinux
kunalsaddar said:
Hi Guys,
Before you guys shoot me down, Just wanted to say, i searched XDA for 2 hours, couldn't find the exact reply. And a few topics are open since a year with no reply, So thinking that someone will reply to me. I am opening this "Need Help" Ticket.
I have a micromax a110 with 4.04 - as i got no update ever! So what i did was
Rooted the phone properly as per the procedure.
Downloaded the CWM 6.0.4.9 recovery [selinux] and flashed it with Recovery Link :http://forum.xda-developers.com/mic...opment/recovery-cwm-6-0-4-9-recovery-t2789175
Downloaded the [ROM][4.2.2] CanvaS5™ V1.1 Link: http://forum.xda-developers.com/showthread.php?t=2775553
After flashing the rom properly, when i reboot the phone, it gets stuck on the boot screen forever. Am i doing something wrong? Should i have flashed a kernel? or something. Please note, i am not looking into going back to stock, as i have moved into the dark side of the root world .
Since i have just been a Read-only user of XDA for all this while(more than a year), with no posts ever, i cant request for help on the Developer Thread as it requires privileges. Requesting someone to please post this topic there so i can speak to the dev or please give me a answer to help me:silly:
Click to expand...
Click to collapse
That Recovery you flashed is SELinux enabled and is not supported by 4.1-4.2.2 Jelly bean Roms so you have got boot loop . You can try other recovery or flash higher android version roms .
---------- Post added at 05:20 PM ---------- Previous post was at 05:06 PM ----------
I think this CWM recovery will work with your downloaded rom
http://forum.xda-developers.com/showthread.php?t=2204785
And remember before flashing anything clear data,cache and dalvik-cache.
Happy Flashing

Thanks guys for the reply, let me flash the above CMW and check. Will revert shortly

How to i put the CMW in the phones root directory now for it to flash? The phone doesnt start so cant access it through usb. Any ideas?

kunalsaddar said:
How to i put the CMW in the phones root directory now for it to flash? The phone doesnt start so cant access it through usb. Any ideas?
Click to expand...
Click to collapse
Since your phone is not booting you should use SP Flash tool on PC to flash the recovery. Here's a guide to SP Flash tool:
gizbeat.com/3774/how-to-flash-cwm-without-root-with-sp-flash-tool/
Hope it works .

4shreyas said:
Since your phone is not booting you should use SP Flash tool on PC to flash the recovery. Here's a guide to SP Flash tool:
gizbeat.com/3774/how-to-flash-cwm-without-root-with-sp-flash-tool/
Hope it works .
Click to expand...
Click to collapse
Thanks dude, for your quick response. I wont be able to confirm on this today as setting up SP Flash tool is just too hard. It talks about some scatter file. I dont know how to make that.Let me get a grip on that, will confirm then. Thanks for the help anyhow

kunalsaddar said:
Thanks dude, for your quick response. I wont be able to confirm on this today as setting up SP Flash tool is just too hard. It talks about some scatter file. I dont know how to make that.Let me get a grip on that, will confirm then. Thanks for the help anyhow
Click to expand...
Click to collapse
Great , Here the link for official Jelly bean update for your device by micromax as said in that post . I think that file has scatter file (it contains your phone's storage partition info ) . There is also guide to flash using SP Flash tool . Use it .
http://forum.xda-developers.com/showthread.php?t=2209288
Hit Thanks if it works

4shreyas said:
Great , Here the link for official Jelly bean update for your device by micromax as said in that post . I think that file has scatter file (it contains your phone's storage partition info ) . There is also guide to flash using SP Flash tool . Use it .
http://forum.xda-developers.com/showthread.php?t=2209288
Hit Thanks if it works
Click to expand...
Click to collapse
Hey shreyas,
I have tried it with SP tools, it doesnt work, man. Drivers, Softwares, updated all of them, i keep doing everything. I know i am doing something wrong, but its hard to identify, spent like the entire night trying to make it. Can't i get a flashable zip for CMW instead or know that on which rom did the CWM selinux work on? This boot looping is now killing :fingers-crossed:

Finally, i found a way, thanks 4Shreyas for all the help. Gave me knowledge and helped me identify the errors.
I couldn't flash the rom or the cmw recvoery through the pc as the drivers for SP tools never worked on my Win 8.1 x64. Finally applied the stock jellybean file from http://forum.xda-developers.com/showthread.php?t=2160609 . It updated my CMW since that was the problem i was stuck in bootloop.
After that i flash the phone with my desired rom.
In the end, all good:laugh:

kunalsaddar said:
Finally, i found a way, thanks 4Shreyas for all the help. Gave me knowledge and helped me identify the errors.
I couldn't flash the rom or the cmw recvoery through the pc as the drivers for SP tools never worked on my Win 8.1 x64. Finally applied the stock jellybean file from http://forum.xda-developers.com/showthread.php?t=2160609 . It updated my CMW since that was the problem i was stuck in bootloop.
After that i flash the phone with my desired rom.
In the end, all good:laugh:
Click to expand...
Click to collapse
Cheers bro !!!! Yes getting MTK drivers in win 8 is a challenging task and as SELinux CWM recovery is concerned you can flash 4.3.x and 4.4.x roms . Google it , if any rom is available then use that recovery to flash those roms .
Enjoy !!

4shreyas said:
Cheers bro !!!! Yes getting MTK drivers in win 8 is a challenging task and as SELinux CWM recovery is concerned you can flash 4.3.x and 4.4.x roms . Google it , if any rom is available then use that recovery to flash those roms .
Enjoy !!
Click to expand...
Click to collapse
True that, i actually gave up trying to find the drivers. There arnt any 4.3 or 4.4.x roms released for mmx. When they do, will surely apply the Selinux CWM. Thanks for all the help .:good:

[Q&A] PHILZ RECOVERY for SPICE MI509

Q&A for PHILZ RECOVERY for SPICE MI509
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for PHILZ RECOVERY for SPICE MI509. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Not working...
Hi "Saurabh" i tried this procedure my Spice MI509 is showing Spice logo "S" and restarting continuously please help me out.

epsan said:
Hi "Saurabh" i tried this procedure my Spice MI509 is showing Spice logo "S" and restarting continuously please help me out.
Click to expand...
Click to collapse
How u flashing this recovery...???
Use mobile uncle tool...
It needs root and then place the recovery in sdcard after renaming It to recovery.img and then open Mobil uncle tool and select install recovery from sdcard and then select the recovery file...
Wait some time and your recovery will work now...
And I want to know that on which android version u r?? Kitkat or jelly bean???

saurabh1234 said:
How u flashing this recovery...???
Use mobile uncle tool...
It needs root and then place the recovery in sdcard after renaming It to recovery.img and then open Mobil uncle tool and select install recovery from sdcard and then select the recovery file...
Wait some time and your recovery will work now...
And I want to know that on which android version u r?? Kitkat or jelly bean???
Click to expand...
Click to collapse
Hey Thanks for reply, i resolved that issue by trying to turn on the phone by usb power, phone boots up normally but without any signal both sims are properly inserted but no signal (may be IMEI issue) how to resolve it???. ( procedure i followed for previous attempt, i am currently on JellyBean my stock android version(people say Mi509 come with KITKAT out of box but its not in case of my phone. i followed your procedure as it is, downloaded attachment and MobileUncle apk installed that apk , opened that uncle and selected recovery update and it automatically restarted.)

now i know that my standard Android Recovery was OVERWRITTEN by custom recovery and i DIDNT backup my stock recovery . what should i do. ( i read something about EFS partition which contains IMEI info which was corrupted by custom recovery i believe ). and also please send me backup of recovery partition (or EFS) to me @ [email protected] i will set my own IMEI nos using Enginering Mode apk . this is my only phone please help me

epsan said:
now i know that my standard Android Recovery was OVERWRITTEN by custom recovery and i DIDNT backup my stock recovery . what should i do. ( i read something about EFS partition which contains IMEI info which was corrupted by custom recovery i believe ). and also please send me backup of recovery partition (or EFS) to me @ [email protected] i will set my own IMEI nos using Enginering Mode apk . this is my only phone please help me
Click to expand...
Click to collapse
thats why i was asking about android version....
bcoz all roms and recovery available for MI509 uses KITKAT kernel and you flashed it on Jellybean...
here i attach the stock recovery of jellybean....
for fixing IMEI use this link.........
This will fix it permanently...
IMEI TOOL with video tutorial....https://docs.google.com/uc?id=0B5DM6ZSz3dh-eTQzV2VWck1Kckk&export=download
Database- http://www.mediafire.com/download/no1oo8rroq4uqtr/Database.rar
use database file from second link bcoz this database is for spice mi509....
and next time dont flash rom if you have jellybean

Hey "Sourabh" did i "bricked" my phone???? and how to overcome that please.............
---------- Post added at 02:44 PM ---------- Previous post was at 02:03 PM ----------
Again Thanks for the reply, i just came to know that..... i should back up efs directory thank you very much for your support, i will let you know the status once i finish all the countermeasures.

epsan said:
Hey "Sourabh" did i "bricked" my phone???? and how to overcome that please.............
---------- Post added at 02:44 PM ---------- Previous post was at 02:03 PM ----------
Again Thanks for the reply, i just came to know that..... i should back up efs directory thank you very much for your support, i will let you know the status once i finish all the countermeasures.
Click to expand...
Click to collapse
If your device I bricked then just flash stock firmware using sp flash tool...if you don't know how to ...
Then give it to service centre but don't tell them about rooting and flashing custom rom...
Bcoz if you tell them then they will cost you money...

saurabh1234 said:
If your device I bricked then just flash stock firmware using sp flash tool...if you don't know how to ...
Then give it to service centre but don't tell them about rooting and flashing custom rom...
Bcoz if you tell them then they will cost you money...
Click to expand...
Click to collapse
Hey "Saurabh" you didddit. i tried using SPFTool and its working i was able to get my imei nos also(but it took me two days to figure it out). NOW how do i upgrade my mobile to KITKAT do you have that rom. can you please send me that link(stock rom).

epsan said:
Hey "Saurabh" you didddit. i tried using SPFTool and its working i was able to get my imei nos also(but it took me two days to figure it out). NOW how do i upgrade my mobile to KITKAT do you have that rom. can you please send me that link(stock rom).
Click to expand...
Click to collapse
Above was mistyping I was writing 'is' but leaved at 'i'. But thats no problem.
Below is stock kitkat firmware....flash through spflashtool...
https://docs.google.com/uc?id=0B1F4thoxIkjEb3pMT0N1UEhmQ00
When flashing firmware is done then root your mobile and install the philz recovery using flashify or mobile uncle tool to install custom rom...

saurabh1234 said:
Above was mistyping I was writing 'is' but leaved at 'i'. But thats no problem.
Below is stock kitkat firmware....flash through spflashtool...
https://docs.google.com/uc?id=0B1F4thoxIkjEb3pMT0N1UEhmQ00
When flashing firmware is done then root your mobile and install the philz recovery using flashify or mobile uncle tool to install custom rom...
Click to expand...
Click to collapse
Thank you very much "Saurabh" it really worked and i am running stock KITKAT now and will change it to custom rom very soon... again Thank you very much :good:

epsan said:
Thank you very much "Saurabh" it really worked and i am running stock KITKAT now and will change it to custom rom very soon... again Thank you very much :good:
Click to expand...
Click to collapse
i am always here to help...
and now i am uploading my new ORIGINAL LOLLIPOP ROM CM12.1 ...
and links will be available in two three days...

Could someone provide backup image of spice MI 509. My phone got stuck in a bootloader while changing font.
Is there any method to come out of the problem. Pls reply.

subash.ateet said:
Could someone provide backup image of spice MI 509. My phone got stuck in a bootloader while changing font.
Is there any method to come out of the problem. Pls reply.
Click to expand...
Click to collapse
download the stock rom from xda firmware site and then use flashtool in that zip to install the firmware in your mi509...it will boot... but u will lost your apps installed earlier...

saurabh1234 said:
download the stock rom from xda firmware site and then use flashtool in that zip to install the firmware in your mi509...it will boot... but u will lost your apps installed earlier...
Click to expand...
Click to collapse
Thanks Saurabh1234 for your reply.
How can I use flashtool in my mobile as it is stucking in bootloader? I can access only Recovery mode ( Power + Vol. down). Is there any method to install the firmware by Recovery mode(Power + Vol. down)?
I had already tried the SP flastool to flash my mobile but the software dont access/ read my mobile.

subash.ateet said:
Thanks Saurabh1234 for your reply.
How can I use flashtool in my mobile as it is stucking in bootloader? I can access only Recovery mode ( Power + Vol. down). Is there any method to install the firmware by Recovery mode(Power + Vol. down)?
I had already tried the SP flastool to flash my mobile but the software dont access/ read my mobile.
Click to expand...
Click to collapse
flashtool will work on your pc and laptop...
download firmware and then install drivers given in it in your pc then open your flashtool and load bootloader...
now connect your device to pc via data cable with or without battery ...
then click on download button in flashtool and press vol down on device.
then update will start..
check this link...
http://forum.xda-developers.com/android/general/rooting-cwm-firmware-spice-stellar-mi-t2969920

Trying to port PhilZ 6.59.0
Can you tell me how you ported PhilZ 6.57.9.......coz i'm trying to port PhilZ 6.59.0

Help! NO OS installed/Need help flashing stock ROM to soft(?)-bricked S6 SM-G290F

So yesterday i done a pretty stupid thing of restarting my phone after I hid my SU binary using hide my root. This left what i think was a soft-brick as it was stuck on the samsung animation. I then stupidly enough got confused with my TWRP recovery menu and ended up wiping out my OS, leaving only the TWRP recovery on the phone. I then decided to download a 6.1.1 stock rom for my SM-G920F. When i tried flashing however, somehow ODIN froze and i made another stupid mistake of restarting my phone from download mode which resulted in the phone being froze on a screen saying " an error has occurred while updating the device software use the emergency recovery function s6 " cant provide an image as this is my first post, but please google the error message if you wish to see it
So i panicked thinking my phone was dead completely and surrendered, but today i managed to hook it up to TWRP and flashed the recovery. Now when i bootup i can access download mode and it boots straight to recovery. To make matters worse I began trying to download the original rom i recieved when i got the phone, however when i try flashing i get errors such as " SW rev, Check Fail: 'x' binary 'y' device "
(x and y vary for each stock rom i tried flashing.)
I have no way of finding out my firmware, bootloader info or anything. Is there ANY fix to this? I've made a huge mess of everything and I'm now desperate. Please, any advice would be a god-send. Thank you for withstanding this crappy post, I'm kind of a noob at xda.
EDIT 1- So I managed to install a custom ROM and kernal as i could transfer files while in TWRP for some reason but a new problem has showed up. So as of right now I have a custom rom installed which works, but when reboot my phone, TWRP is automatically opened after the initial samsung logo. I usually have to reflash my custom ROM (without wiping any data besides cache and dalvik) and the ROM installer will then reboot into the ROM, however this means when my phone turns off, my recovery is booted up instead of the ROM
I'm sensing some sort of Bootloader problem?

Metro221 said:
Now when i bootup i can access download mode and it boots straight to recovery.
Click to expand...
Click to collapse
First off i dont own an S6 (im still rocking the S4), but i have had some problems over the years but always managed to fix them in the end.
So while in Download mode are you not able to Flash Stock ROM (downloaded from samfirmware) via ODIN (following the instructions on the site)?
In TWRP are you not able to flash a custom ROM (probably with OTG cable if you dont have the ROM stored on the internal memory).
Any issues i have had i have always been able to do at least one of the above methods. If you cant do either or, im not sure what else i would try.
Thanks

Metro221 said:
So yesterday i done a pretty stupid thing of restarting my phone after I hid my SU binary using hide my root. This left what i think was a soft-brick as it was stuck on the samsung animation. I then stupidly enough got confused with my TWRP recovery menu and ended up wiping out my OS, leaving only the TWRP recovery on the phone. I then decided to download a 6.1.1 stock rom for my SM-G920F. When i tried flashing however, somehow ODIN froze and i made another stupid mistake of restarting my phone from download mode which resulted in the phone being froze on a screen saying " an error has occurred while updating the device software use the emergency recovery function s6 " cant provide an image as this is my first post, but please google the error message if you wish to see it
So i panicked thinking my phone was dead completely and surrendered, but today i managed to hook it up to TWRP and flashed the recovery. Now when i bootup i can access download mode and it boots straight to recovery. To make matters worse I began trying to download the original rom i recieved when i got the phone, however when i try flashing i get errors such as " SW rev, Check Fail: 'x' binary 'y' device "
(x and y vary for each stock rom i tried flashing.)
I have no way of finding out my firmware, bootloader info or anything. Is there ANY fix to this? I've made a huge mess of everything and I'm now desperate. Please, any advice would be a god-send. Thank you for withstanding this crappy post, I'm kind of a noob at xda.
Click to expand...
Click to collapse
If you boot in TWRP recovery it can be soved easily.
1)first try do wipe data and internal partition.And then try flashing stock firmware with odin(download proper file basing on ur model)
2)U may download a rom for ur model and flash using twrp.then if u want u can stay with the rom,i u dont u can try to flash again with odin after installing rom
Click :good: for my answer

Rremi said:
If you boot in TWRP recovery it can be soved easily.
1)first try do wipe data and internal partition.And then try flashing stock firmware with odin(download proper file basing on ur model)
2)U may download a rom for ur model and flash using twrp.then if u want u can stay with the rom,i u dont u can try to flash again with odin after installing rom
Click :good: for my answer
Click to expand...
Click to collapse
Yeah i managed to install a custom rom Tyrannus v 28.1, through TWRP, however, now I am experiencing a new problem, when i reboot - my phone boots up into TWRP instead of the ROM, more information in the edit i made in the post. THanks for all the continued help

Rremi said:
If you boot in TWRP recovery it can be soved easily.
1)first try do wipe data and internal partition.And then try flashing stock firmware with odin(download proper file basing on ur model)
2)U may download a rom for ur model and flash using twrp.then if u want u can stay with the rom,i u dont u can try to flash again with odin after installing rom
Click :good: for my answer
Click to expand...
Click to collapse
Waste of a post, but i wanted to say shqiptar, faleminderit. :*

Metro221 said:
Waste of a post, but i wanted to say shqiptar, faleminderit. :*
Click to expand...
Click to collapse
Ska gje.
Nga shqiperia je ?

Rremi said:
Ska gje.
Nga shqiperia je ?
Click to expand...
Click to collapse
Po po nga shqiperia.
But living in London ????

Would Samsung smart switch not help installing the stock rom?
Sent from my SM-G920F using Tapatalk

jr866gooner said:
Would Samsung smart switch not help installing the stock rom?
Click to expand...
Click to collapse
'Device not recognised' fixed it though. Flashed custom ROM with TWRP

Emergency recovery will and should help.