[solved] mtk 6589, sim not detected, baseband & radio loss, invalid imei. After flas
Hello.
I recently bought a Chinese phone MTK6589 (XYZ X1).
The first thing I did was do a full backup with MTKDroidTools.
When you upgrade to the latest official ROM and on the phone, SIM card detected stopped.
Update with backup from SP Flash Tools, but the SIM was not detected.
So as it was under warranty I returned the phone and switch to another.
I got the following phone MTK6589T (Pomp W99), again made an initial backup.
Install TWRP recovery and restart, same problem. Sim undetected.
When trying to install flash backup with SP Tools, the program did not detect the device.
So I had the phone and not the sim calls undetected Radio Baseband & empty and invalid IMEI.
To fix this we need to have previously made a backup with MtkDroidTools and convert it to SP Flash Tool If you do not have the backup, will have to look to find a full ROM for our device.
When trying to flash with SP, giving Error 3013 and did not recognize the device, the solution for this is only the first flash preloader and then again perform full flashing.
I did so but the phone was the same, so keep a thousand forums looking for the solution without success.
So you lost mobile giving, what I've done is a full format from SP flash tool (Format option), to leave completely empty.
And then flash the backup made with MtkDroidTools but scatter loading in the sec_ro and userdata.nvram.only
When you turn on the phone, this recognized the SIM! But was invalid IMEI.
So I went into engineer mode (keypad, * # * # 3646633 # * # *)
CDS info
Radio Settings
Phone 1: Insert the command at + egmr = 1.7 "IMEI1"
Phone 2: Insert the command at + egmr = 1.10 "imei2"
When you restart the phone and everything worked fine.
A greeting
Do you have the complete rom for pomp w99? Would you please post it here? Another thing, what cwm/TWRP souls I use?
Thanks!
cherry mobile apollo no service detected after flashing
sir do u have a full rom for this model?
Can i used for mtk 6575..?
Because i have same problemo.
Alerba13 said:
Can i used for mtk 6575..?
Because i have same problemo.
Click to expand...
Click to collapse
Same for me, i try a lot of method but no radio no IMEI
yseku said:
Hello.
I recently bought a Chinese phone MTK6589 (XYZ X1).
The first thing I did was do a full backup with MTKDroidTools.
When you upgrade to the latest official ROM and on the phone, SIM card detected stopped.
Update with backup from SP Flash Tools, but the SIM was not detected.
So as it was under warranty I returned the phone and switch to another.
I got the following phone MTK6589T (Pomp W99), again made an initial backup.
Install TWRP recovery and restart, same problem. Sim undetected.
When trying to install flash backup with SP Tools, the program did not detect the device.
So I had the phone and not the sim calls undetected Radio Baseband & empty and invalid IMEI.
To fix this we need to have previously made a backup with MtkDroidTools and convert it to SP Flash Tool If you do not have the backup, will have to look to find a full ROM for our device.
When trying to flash with SP, giving Error 3013 and did not recognize the device, the solution for this is only the first flash preloader and then again perform full flashing.
I did so but the phone was the same, so keep a thousand forums looking for the solution without success.
So you lost mobile giving, what I've done is a full format from SP flash tool (Format option), to leave completely empty.
And then flash the backup made with MtkDroidTools but scatter loading in the sec_ro and userdata.nvram.only
When you turn on the phone, this recognized the SIM! But was invalid IMEI.
So I went into engineer mode (keypad, * # * # 3646633 # * # *)
CDS info
Radio Settings
Phone 1: Insert the command at + egmr = 1.7 "IMEI1"
Phone 2: Insert the command at + egmr = 1.10 "imei2"
When you restart the phone and everything worked fine.
A greeting
Click to expand...
Click to collapse
@yseku
Would you please post here your mtkdroidtools backup for pomp w99?
Mine was giving error so I´ve deleted it... now I have the same problem as yours and don´t have a backup...
Please please please help...
Hello,
Basically this is the procedure I followed.
I'm uploading the backup to MEGA, it takes about 2 hours ...
I think it should work on any MTK (6589,6575...)
Greetings
yseku said:
Hello,
Basically this is the procedure I followed.
I'm uploading the backup to MEGA, it takes about 2 hours ...
I think it should work on any MTK (6589,6575...)
Greetings
Click to expand...
Click to collapse
@yseku, thank you so much for your good will and fast response! Will be waiting for the link with the mtkdroidtools POMP W99 complete backup...
I own you one... Please fell free to ask for help if you need anything...
yseku said:
Hello,
Basically this is the procedure I followed.
I'm uploading the backup to MEGA, it takes about 2 hours ...
I think it should work on any MTK (6589,6575...)
Greetings
Click to expand...
Click to collapse
Using MobileUncle Tools app I have tried to update my recovery, I searched and downloaded a recovery using mobile uncle and installed it, again, using mobile uncle. I now don't have a recovery and can't find any signal, on mobile uncle I have it shows I have No IMEI, no internet no sim detected radio loss all gone and your method above does not work unfortunatly as it said Write Failed, Any ideas?
I cant post external links on the forum, until I have 10 posts...
No problem... Upload it as image...
ZakBrindle said:
Using MobileUncle Tools app I have tried to update my recovery, I searched and downloaded a recovery using mobile uncle and installed it, again, using mobile uncle. I now don't have a recovery and can't find any signal, on mobile uncle I have it shows I have No IMEI, no internet no sim detected radio loss all gone and your method above does not work unfortunatly as it said Write Failed, Any ideas?
Click to expand...
Click to collapse
It must be the error you´re getting... Try other versions of sp flash tool... Put back your previous recovery with mobileuncletools if you can boot to android OS...
yseku said:
posting...
Click to expand...
Click to collapse
Ready for downloading as soon as you post!
eteles said:
It must be the error you´re getting... Try other versions of sp flash tool... Put back your previous recovery with mobileuncletools if you can boot to android OS...
Click to expand...
Click to collapse
I can boot to my Android OS, how do i revert to an old recovery? Keeping in mind i currently have no recovery :/
eteles said:
It must be the error you´re getting... Try other versions of sp flash tool... Put back your previous recovery with mobileuncletools if you can boot to android OS...
Ready for downloading as soon as you post!
Click to expand...
Click to collapse
Link on previous post
ZakBrindle said:
I can boot to my Android OS, how do i revert to an old recovery? Keeping in mind i currently have no recovery :/
Click to expand...
Click to collapse
You have to have a backup of your old recovery.img... Put it in the root of sdcard, open mobileuncle, recovery update, you will see the file there, select and confirm.
yseku said:
I cant post external links on the forum, until I have 10 posts...
No problem... Upload it as image...
Click to expand...
Click to collapse
I will try that now, thank you
yseku said:
Link on previous post
Click to expand...
Click to collapse
Thank you so much!!
Here´s the link for the complete MTKDroidTolls backup for POMP W99 that you uploaded: https://mega.co.nz/#!Yw1RHCjD!ZeGCQAZ_luRD1B9XPCqfdASOoBZYGvmVF5L4633hwgs
Just to help other people with different problems, here´s the link for the CWM flashable stock ROM for POMP W99 (thanks to @tribual): http://uploaded.net/file/7ie3n8s5
and here´s the link for CWM recovery 6.0.4.4 for POMP W99 (thanks to @tribual) http://www60.zippyshare.com/v/62999584/file.html
eteles said:
You have to have a backup of your old recovery.img... Put it in the root of sdcard, open mobileuncle, recovery update, you will see the file there, select and confirm.
Click to expand...
Click to collapse
I dont have a backup of my old recovery :/ lost it accidently as usb currupt
eteles said:
Thank you so much!!
Here´s the link for the complete MTKDroidTolls backup for POMP W99 that you uploaded: https://mega.co.nz/#!Yw1RHCjD!ZeGCQAZ_luRD1B9XPCqfdASOoBZYGvmVF5L4633hwgs
Just to help other people with different problems, here´s the link for the CWM flashable stock ROM for POMP W99 (thanks to @tribual): http://uploaded.net/file/7ie3n8s5
Click to expand...
Click to collapse
Downloading Now
ZakBrindle said:
I dont have a backup of my old recovery :/ lost it accidently as usb currupt
Downloading Now
Click to expand...
Click to collapse
I´ve just posted another link with CWM recovery... Tested and working... Try this one if you want CWM... Or you can download the complete ROMs and extract the recovery.img file
eteles said:
I´ve just posted another link with CWM recovery... Tested and working... Try this one if you want CWM... Or you can download the complete ROMs and extract the recovery.img file
Click to expand...
Click to collapse
Sorry probably a dumb question, one ive downloaded the
POMP_W99_130807_backup_130922-123036 file
what do i do?
ZakBrindle said:
Sorry probably a dumb question, one ive downloaded the
POMP_W99_130807_backup_130922-123036 file
what do i do?
Click to expand...
Click to collapse
unzip it, find recovery.img file, put it in the root of the sd card, open mobile uncle tools, recovery update, select the file and install...
Like this you will get your stock recovery back...
To restore the baseband and imei it´s more complex... please read previous posts (page 1)
Related
hello i make cwm (backup not working correctly)
but other working nice and make hacked boot.img when busybox is in system
you can root phone by "ADB ROOT" command
i dump and edit original files form my B92M phone !!!!!!
i havent got stock rom i have it dumped but it have 800MB
flash it by SP Flash Tool
here is link
CWM RECOVERY + EDITED BOOT ONLY
http://www.uloz.to/xU2BNWt/cwm-root-b92m-zip
or in english
http://www.ulozto.net/xU2BNWt/cwm-root-b92m-zip
FULL ROM WITHOUT SYSTEM
(not tested use it when you have bricked phone only)
http://uloz.to/xjPQWHh/rom-backup-zip
or
http://ulozto.net/xjPQWHh/rom-backup-zip
SYSTEM FOR ROM BACKUP
(not tested use it when you have bricked phone only)
http://uloz.to/xmjTVSJ/system-zip
or
http://ulozto.net/xmjTVSJ/system-zip
CWM BACKUP OF SYSTEM AND CACHE
(restore it by advanced restore)
http://uloz.to/xLYKNWt/backupcwm-zip
or
http://ulozto.net/xLYKNWt/backupcwm-zip
2.5 GB DATA PERMANENT ROOT + FULLY WORKING RECOVERY
(for 2.5gb data after flash you must format data in recovery)
http://uloz.to/xC6fACS/2-5gb-data-perm-root-zip
or
http://ulozto.net/xC6fACS/2-5gb-data-perm-root-zip
TABLET UI MODE REPLACE SERVICES.JAR IN framework and change dpi to 169
http://uloz.to/xXo5qo8/services-jar
or
http://ulozto.net/xXo5qo8/services-jar
brick the phone, help me.
veisen said:
hello i make cwm (backup not working correctly)
but other working nice and make hacked boot.img when busybox is in system
you can root phone by "ADB ROOT" command
i dump and edit original files form my B92M phone !!!!!!
i havent got stock rom i have it dumped but it have 800MB
flash it by SP Flash Tool
here is link
http://www.uloz.to/xU2BNWt/cwm-root-b92m-zip
or in english
http://www.ulozto.net/xU2BNWt/cwm-root-b92m-zip
Click to expand...
Click to collapse
i have my phone bricked. i have formatted all the memory. Could you help me?
I need entire rom with all file .img and .bin including preloader and uboot to flash in sp flash tool..
i'm desperate please help! Thank you!
luka91861 said:
i have my phone bricked. i have formatted all the memory. Could you help me?
I need entire rom with all file .img and .bin including preloader and uboot to flash in sp flash tool..
i'm desperate please help! Thank you!
Click to expand...
Click to collapse
UPLOADED 1ST POST
flash FULL ROM WITHOUT SYSTEM and restore CWM BACKUP OF SYSTEM AND CACHE in CWM by advanced restore
veisen said:
UPLOADED 1ST POST
flash FULL ROM WITHOUT SYSTEM and restore CWM BACKUP OF SYSTEM AND CACHE in CWM by advanced restore
Click to expand...
Click to collapse
ok i tried but the phone doesn't enter in recovery mode. Which buttons do i press to enter in recovery mode?
can you post also system.img and cache.img
you are fantastic! Thank you!
veisen said:
hello i make cwm (backup not working correctly)
but other working nice and make hacked boot.img when busybox is in system
you can root phone by "ADB ROOT" command
i dump and edit original files form my B92M phone !!!!!!
i havent got stock rom i have it dumped but it have 800MB
flash it by SP Flash Tool
here is link
CWM RECOVERY + EDITED BOOT ONLY
http://www.uloz.to/xU2BNWt/cwm-root-b92m-zip
or in english
http://www.ulozto.net/xU2BNWt/cwm-root-b92m-zip
FULL ROM WITHOUT SYSTEM
(not tested use it when you have bricked phone only)
http://uloz.to/xjPQWHh/rom-backup-zip
or
http://ulozto.net/xjPQWHh/rom-backup-zip
SYSTEM FOR ROM BACKUP
(not tested use it when you have bricked phone only)
http://uloz.to/xmjTVSJ/system-zip
or
http://ulozto.net/xmjTVSJ/system-zip
CWM BACKUP OF SYSTEM AND CACHE
(restore it by advanced restore)
http://uloz.to/xLYKNWt/backupcwm-zip
or
http://ulozto.net/xLYKNWt/backupcwm-zip
Click to expand...
Click to collapse
luka91861 said:
ok i tried but the phone doesn't enter in recovery mode. Which buttons do i press to enter in recovery mode?
can you post also system.img and cache.img
you are fantastic! Thank you!
Click to expand...
Click to collapse
volume UP AND power and keep volupe up pressed wait
reinsert battery first
ok i have entered in cwm but when i go on advanced restore. i have this message: E: can't mount sdcard
cwm doesn't work properly. cant't mount anything...
maybe because i need mbr and ebr1 because i have bricked and in those files i have information about partitions...
maybe i need also dsp_bl and sec_ro
luka91861 said:
ok i have entered in cwm but when i go on advanced restore. i have this message: E: can't mount sdcard
cwm doesn't work properly. cant't mount anything...
maybe because i need mbr and ebr1 because i have bricked and in those files i have information about partitions...
maybe i need also dsp_bl and sec_ro
Click to expand...
Click to collapse
in this package you have full system without system.img
FULL ROM WITHOUT SYSTEM look on first post
to unbrick we need also userdata and cache
luka91861 said:
to unbrick we need also userdata and cache
Click to expand...
Click to collapse
no
i unbrick mtk6577 and 6575 phones without data and cache partition
veisen said:
no
i unbrick mtk6577 and 6575 phones without data and cache partition
Click to expand...
Click to collapse
Ok i have unbricked. But i have used also cache and data. Now everythigs goes fine.
Thanks so mouch! Is possible start a jelly bean project togheter? I see that other mtk6577 had recived an official jb update. What can we do?
Thanks mate for CWM?
I've flashed and confirms it works.
Here is a good tutorial i followed. Make sure you have MT6577 drivers first-
http://bm-smartphone-reviews.blogspot.co.uk/2012/05/mt6575-flashing-tutorial.html
ahmadcentral said:
Thanks mate for CWM?
I've flashed and confirms it works.
Here is a good tutorial i followed. Make sure you have MT6577 drivers first-
http://bm-smartphone-reviews.blogspot.co.uk/2012/05/mt6575-flashing-tutorial.html
Click to expand...
Click to collapse
i repair CWM and have it fully works upload soon
Thinking to buy this cell...
veisen said:
hello i make cwm (backup not working correctly)
but other working nice and make hacked boot.img when busybox is in system
you can root phone by "ADB ROOT" command
i dump and edit original files form my B92M phone !!!!!!
i havent got stock rom i have it dumped but it have 800MB
flash it by SP Flash Tool
here is link
CWM RECOVERY + EDITED BOOT ONLY
http://www.uloz.to/xU2BNWt/cwm-root-b92m-zip
or in english
http://www.ulozto.net/xU2BNWt/cwm-root-b92m-zip
FULL ROM WITHOUT SYSTEM
(not tested use it when you have bricked phone only)
http://uloz.to/xjPQWHh/rom-backup-zip
or
http://ulozto.net/xjPQWHh/rom-backup-zip
SYSTEM FOR ROM BACKUP
(not tested use it when you have bricked phone only)
http://uloz.to/xmjTVSJ/system-zip
or
http://ulozto.net/xmjTVSJ/system-zip
CWM BACKUP OF SYSTEM AND CACHE
(restore it by advanced restore)
http://uloz.to/xLYKNWt/backupcwm-zip
or
http://ulozto.net/xLYKNWt/backupcwm-zip
Click to expand...
Click to collapse
Hi Friend;
Im'thinking to buy this cell. Can you tell me cons and pros? thanks for your cooperation!!!:good:
tanoobx said:
Hi Friend;
Im'thinking to buy this cell. Can you tell me cons and pros? thanks for your cooperation!!!:good:
Click to expand...
Click to collapse
i complete custom rom soon and i realy like this phone
with stock rom have problem with GPS long time lock but i fix it in rom
rom will be multilanguage (all android languages)
now 2.5gb data partition complete (upload soon)
Fantastic! is the ROM compatible with 512mb phone?
Veisen,
I appreciate your support for this phone my friend. Please let me know how you get on with they custom rom. I will be happy to use and test for you.
+1
luka91861 said:
+1
Click to expand...
Click to collapse
look first post
2.5gb data + fully working recovery
this rom is compatible with 512mb rersion
Now i have invalid imei message. What can I do?
solved!
veisen said:
look first post
2.5gb data + fully working recovery
this rom is compatible with 512mb rersion
Click to expand...
Click to collapse
Thank you for this-
In rom you are working on,
Have you fixed the random crashes and gps taking long time to fix.
I will install asap to test.
Luka- Please tell how you solved IMEI problem in case i get same issue. Thanks.
I have problems with my Smartphone stock rom since i rooted and i deleted some system apps , i didn't installed cmw recovery just have stock recovery, the brand sent me the firmware via gmail and i downloaded it, i don't know how to install it its a zip file that contains : boot.img, cache.img, system.img and more, well i don't know what to do to install this to restore the phone rom PLEASE HELP ME!
mostevil94 said:
I have problems with my Smartphone stock rom since i rooted and i deleted some system apps , i didn't installed cmw recovery just have stock recovery, the brand sent me the firmware via gmail and i downloaded it, i don't know how to install it its a zip file that contains : boot.img, cache.img, system.img and more, well i don't know what to do to install this to restore the phone rom PLEASE HELP ME!
Click to expand...
Click to collapse
What is your phone?
just download your stock firmware and flash it with cwm. cmiiw :good:
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
sent from Galaxy Young GT-S6310
ZonaRMR said:
What is your phone?
Click to expand...
Click to collapse
Hi thanks for reply, my hone is a new brand called Szenio from spain, a mediatek mt6582m processor phone called Szenio Syreni 50QHD, i can't find CMW recovery for this phone cause its not popular its new, they just sent me the firmware zip , with 378mb, i have windows 8 if there is any way to install this zip to my phone with any program.
bdkbdkbdk said:
just download your stock firmware and flash it with cwm. cmiiw :good:
I can't find a version of cmw recovery for my phone cause is recent, unpopular new brand Szenio, model Syreni 50QHD
They sent me just the zip with the rom but i don't know what to bo, if i had cmw but i can't find a version for my phone.
Click to expand...
Click to collapse
mostevil94 said:
Hi thanks for reply, my hone is a new brand called Szenio from spain, a mediatek mt6582m processor phone called Szenio Syreni 50QHD, i can't find CMW recovery for this phone cause its not popular its new, they just sent me the firmware zip , with 378mb, i have windows 8 if there is any way to install this zip to my phone with any program.
Click to expand...
Click to collapse
This will help you, visit this link http://forum.xda-developers.com/showthread.php?t=1982587 : Bueno:
you should restore the backup u had made before flashing anything:good:
new_at_this(jatin) said:
you should restore the backup u had made before flashing anything:good:
Click to expand...
Click to collapse
I didn't had anything to do, with stock recovery i can't do anything just factory reset, i just rooted phone with Framaroot and i deleted some system apps with a app form play store, i got a force close error when i go to display settings.
ZonaRMR said:
This will help you, visit this link http://forum.xda-developers.com/showthread.php?t=1982587 : Bueno:
Click to expand...
Click to collapse
I downloaded latest version of SP Flash tool , mtk usb drivers for windows 8, when iopen flash tool and i select scatter file i press download , after i connect smartphone in the bottom right - Mediatek preloader USB VCOM port (COM3) and get stuck at 0% of process, don't show any progress bar with red just 0%, other version of SD Flash tool i get erorr after red progress : error 8200, i don't know what to do, what is the problem.
mostevil94 said:
I downloaded latest version of SP Flash tool , mtk usb drivers for windows 8, when iopen flash tool and i select scatter file i press download , after i connect smartphone in the bottom right - Mediatek preloader USB VCOM port (COM3) and get stuck at 0% of process, don't show any progress bar with red just 0%, other version of SD Flash tool i get erorr after red progress : error 8200, i don't know what to do, what is the problem.
Click to expand...
Click to collapse
You must load the correct scatter file (in your case mt6582), turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
Press F9 (or hit Download button) and connect your phone into the computer via USB data cable.
The process will start and a red progress bar will appear.
Thankx Buddy Its Work
Thanks
Thanks it worked. And Odin is also the best way to go.
ZonaRMR said:
You must load the correct scatter file (in your case mt6582), turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
Press F9 (or hit Download button) and connect your phone into the computer via USB data cable.
The process will start and a red progress bar will appear.
Click to expand...
Click to collapse
I put the scatter from my firmware, its name is MT6589_Android_scatter_emmc, i don't know hwy is mt6589 since my phone has mt6582 or mt6582m, by the way, can you help me to get scatter for mt6582? thank you very much for help.
mostevil94 said:
I put the scatter from my firmware, its name is MT6589_Android_scatter_emmc, i don't know hwy is mt6589 since my phone has mt6582 or mt6582m, by the way, can you help me to get scatter for mt6582? thank you very much for help.
Click to expand...
Click to collapse
I'm confused, I searched specifications of your phone and says I have a mt6582m processor and on the other hand said to have a mt6589!
which specification is correct?
ZonaRMR said:
I'm confused, I searched specifications of your phone and says I have a mt6582m processor and on the other hand said to have a mt6589!
which specification is correct?
Click to expand...
Click to collapse
I send you link with original specs.
Hi,
please, can help me to find stock ROM with scatter file for Syreni-50 qhd my device not booting
thanks
Hi i am posting this thread because i couldn't find any good tutorial that helped you for flash the stock Rom of Alcatel one touch flash 6042d
THINGS BEFORE YOU REQUIRED TO FLASH STOCK ROM OF ALCATEL ONE TOUCH FLASH 6042D
1.Download the stock ROM(the link is given below)
2.Download the flash Tool(Given below)
3.Usb driver(Given below)
4.A window PC
5.Patience
6.Last and very important some Mind.
STEP:-1
1.First install the driver to your pc which is necessary.Without installing the necessary driver processing further proceeding is only waste of time.If you do not install driver correctly then you do not install the rom correctly.
2.Second,Check that any another usb driver related to your mobile is not installed on your PC using USB DEVIEW(Download it from link below).If you have any type of driver installed related to Mt65xx the uninstall it or related to any type of android driver uninstall it.I am providing the link of youtube see there how to install the driver. (https://www.youtube.com/watch?v=PAxTCvRmlio).
STEP :-2(HOW TO INSTALL DRIVER)
1. After uninstalling all the related driver to your mobile and other mobile, proceed further.
2. Switch off your mobile phone and go to device manager in PC (In window 8.1 right click on my pc or my computer and then select manage, another procedure is from control panel)
3. Connect your mobile to PC in switch off condition and in device manger PORT SECTION your device is detected.You have only 5 second to selecting on your PC(in package driver are given, install acc. to your PC 32/64 bit) so do Hurry.When you are selecting the driver your mobile start charging don't worry select the driver folder.If you have problem in installing driver like digital signature then search google how to disable it and install it.
4. You think that why we are selecting the driver to port section it is because the mobile have only 5 seconds to start charging in off condition.In those 5 seconds if any data is not send to mobile the mobile start itself.
STEP:-3(LAST STEP to flashing rom)
1. This is easy step.First you have to open the sp flash tool and select flashtool.exe.
2. After opening the sp flash tool select the scatter text file which is in the package of ROM.
3.Select the scatter text file.
4. Then click on download button.
5. Be sure that you check that the mobile phone is in switch off condition and then connect your mobile to your PC.
6. Your mobile is detected and flashing start and takes few minutes.After successful flashing ok sign comes,close it.
7. Remove your device and on it.First booting takes 6-7 minutes.If you find that mobile is stucked at animated alcatel one touch flash boot logo and vibrating again and again .Then go to recovery and clear cache and start it.
DOWNLOAD STOCK ROM of ALCATEL ONE TOUCH FLASH 6042D(http://www.mediafire.com/download/a..._one_touch_flash_stock_rom_and_flash_tool.zip)
DOWNLOAD USB DEVIEW (http://www.mediafire.com/download/5urdr4981m5codw/USBDEVIEW.zip )
If any problem post it.
If you like my work, please HIT Thanks Button
Good job done sir..... After long time got success ...
Really interesting Thank you for this Information! :good:
Flashed but it doesn't look like flashed.
I flashed the ROM. But unfortunately, It didn't work. The process was complete 100%. But when I started the phone, After Alcatel Onetouch Smart Move boot animation screen, there was a screen showing -: "Android is Upgrading. Optimizing Apps".... and when it started, every app was already there.
My phone was rooted earlier. But superSU says it isn't rooted. Also when I go to system updates, it says "Device has detected root". Did you root your mobile before dumping this ROM???
After flashing your previous apps installed in your mobile is still there because the flash process does not successfully completed.Try again to reflash ROM.
And this ROM is actually updated so that you don't find system update.
..
Flashed But nothing is changed
I did exactly as you posted and flashing completed successfully, but nothing is changed and all my old apps are there.
gamerWeirdo said:
I did exactly as you posted and flashing completed successfully, but nothing is changed and all my old apps are there.
Click to expand...
Click to collapse
Try to flash this ROM through this version of SP flash tool ( http://www.4shared.com/rar/eRE4YvIsba/SP_Flash_Tool_v313360198.html#)
If it does not work then SELECT FORMAT ALL + DOWNLOAD in SP flash tool.Then flash ROM but backup your imei before doing this.
Well, I didn't do reflash. But I did a factory reset after flashing and it's okay now. System update also says that your phone is upto date. What I think the reason for that is during sp tool flashing, the check on "user data" was not there. So user data remained the same from previous.. What do you think?
And the link for ROM you gave in the above post, what's the difference?
hvsharma said:
Well, I didn't do reflash. But I did a factory reset after flashing and it's okay now. System update also says that your phone is upto date. What I think the reason for that is during sp tool flashing, the check on "user data" was not there. So user data remained the same from previous.. What do you think?
And the link for ROM you gave in the above post, what's the difference?
Click to expand...
Click to collapse
I think you are right bro.
Sent from 6042D using XDA Free mobile app
Hi,
After following above steps my IMEI is shown as Invalid.. Pls hlp
---------- Post added at 12:12 PM ---------- Previous post was at 11:57 AM ----------
Guys I had lost my IMEI after using this method. luckily I had cwm back up so i re-flashed cwm back up and than flashed this stock rom again without enabling data tick and everything is cool now
jhalife said:
Hi,
After following above steps my IMEI is shown as Invalid.. Pls hlp
---------- Post added at 12:12 PM ---------- Previous post was at 11:57 AM ----------
Guys I had lost my IMEI after using this method. luckily I had cwm back up so i re-flashed cwm back up and than flashed this stock rom again without enabling data tick and everything is cool now
Click to expand...
Click to collapse
You mean USRDATA ?
AmrikSingh said:
You mean USRDATA ?
Click to expand...
Click to collapse
Yes. God Knows how restoring CWM back up and than reflashing brought my IMEI back bt m happy thanks for the ROM
jhalife said:
Yes. God Knows how restoring CWM back up and than reflashing brought my IMEI back bt m happy thanks for the ROM
Click to expand...
Click to collapse
Bro but the ROM i uploaded does not have USRDATA so that by default USRDATA it is unticked.And you are telling that you untick the USRDATA and the flash the ROM ?
:angel::angel:
yaa but I hd selected Download+format all so everythinn hd got tick in 1st attemp anyways now it is resolved
Please, can somebody tell me if this Rom has spanish language? Thank you
Hi Amrik, Today I happened to do factory reset of my phone which was updated using your ROM. unfortunately just by using factory data reset in cwm option I have lost my In. Please help me out. I had taken cwm back up but that back up is not getting flashed I get an error that unable to restore data! and my phone is without imei. any help would be appreciated.
Finally fixed it again. Luckily I had cwm back up of 6months old from which i restored data partition using advanced restore in cwm and my IMEI is back
To all the crowd here it is recommended to have cwm back up before flashing this stock rom as cwm back up after flashign this stock rom fail to flash data partition & mind you MTK droid tools, mobile uncle mtk all fail to restore IMEI.
So please take a back up before of entire rom and dat apartition specially which can save you big time later.
can you give new link, i can't download.. please help
Pls provide a working link, is the stock roms stable? thanks
Help! Link not working.
Sir,
The download link for the ROM seems to be broken. Please help.
Hello friends!
Finally I was able to root Alcatel OneTouch Flash 6042D :good:
I've also created TWRP for this device using TWRP Easy Magic Installer. Thanks to all the guys who are involved in creating such an amazing tool. All the credit goes to them.
I've installed this recovery and flashed few zips using it and it works fine. Need to test it more.
Flashing steps:
0. Backup your phone using MTK Droid tools
1. Download the attached recovery.img file
2. Install using SP Flash tool (make sure you are rooted, if you are not rooted- refer this thread for rooting 6042d)
Note:
I or xda will not be responsible for any damage done to your phone.
In case you have any questions/ queries/ doubts post them here :highfive:
hey can you please re-post the thread for rooting the same. My browser won't load that page for some reason. Thanks.
oh yes
Backup For Soft Bricked Phone
. . .Thanks Nitin for the backup.
Also, If anyone wants a TWRP Backup just PM me coz I took one this time.
thinks
Cheese Cracker said:
Could someone send me a TWRP Backup to boot into?..... I forgot to take backup and bricked my phone.
(I have the TWRP , just need a backup to boot into)
Click to expand...
Click to collapse
You can post an update on this post
nitin.chobhe said:
You can post an update on this post
Click to expand...
Click to collapse
You can find the cwm backup and cwm recovery in needrom site. You can flash the cwm recovery via SP flash tools and then the cwm backup through recovery.
pinakini said:
You can find the cwm backup and cwm recovery in needrom site. You can flash the cwm recovery via SP flash tools and then the cwm backup through recovery.
Click to expand...
Click to collapse
I met @Cheese Cracker and handed over him the backup dvd... http://forum.xda-developers.com/showpost.php?p=63003606&postcount=4
After some hesitation I rooted the 6042d. But the device is not detected in mtk droid tools to back it up. It is OK with spflash tools. Any advice please.
pinakini said:
After some hesitation I rooted the 6042d. But the device is not detected in mtk droid tools to back it up. It is OK with spflash tools. Any advice please.
Click to expand...
Click to collapse
You need to press the key combination if I remember it correctly.
Search for it. And I hope you have the drivers installed
Sent from my Nexus 4 using XDA Free mobile app
Q&A for PHILZ RECOVERY for SPICE MI509
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for PHILZ RECOVERY for SPICE MI509. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Not working...
Hi "Saurabh" i tried this procedure my Spice MI509 is showing Spice logo "S" and restarting continuously please help me out.
epsan said:
Hi "Saurabh" i tried this procedure my Spice MI509 is showing Spice logo "S" and restarting continuously please help me out.
Click to expand...
Click to collapse
How u flashing this recovery...???
Use mobile uncle tool...
It needs root and then place the recovery in sdcard after renaming It to recovery.img and then open Mobil uncle tool and select install recovery from sdcard and then select the recovery file...
Wait some time and your recovery will work now...
And I want to know that on which android version u r?? Kitkat or jelly bean???
saurabh1234 said:
How u flashing this recovery...???
Use mobile uncle tool...
It needs root and then place the recovery in sdcard after renaming It to recovery.img and then open Mobil uncle tool and select install recovery from sdcard and then select the recovery file...
Wait some time and your recovery will work now...
And I want to know that on which android version u r?? Kitkat or jelly bean???
Click to expand...
Click to collapse
Hey Thanks for reply, i resolved that issue by trying to turn on the phone by usb power, phone boots up normally but without any signal both sims are properly inserted but no signal (may be IMEI issue) how to resolve it???. ( procedure i followed for previous attempt, i am currently on JellyBean my stock android version(people say Mi509 come with KITKAT out of box but its not in case of my phone. i followed your procedure as it is, downloaded attachment and MobileUncle apk installed that apk , opened that uncle and selected recovery update and it automatically restarted.)
now i know that my standard Android Recovery was OVERWRITTEN by custom recovery and i DIDNT backup my stock recovery . what should i do. ( i read something about EFS partition which contains IMEI info which was corrupted by custom recovery i believe ). and also please send me backup of recovery partition (or EFS) to me @ [email protected] i will set my own IMEI nos using Enginering Mode apk . this is my only phone please help me
epsan said:
now i know that my standard Android Recovery was OVERWRITTEN by custom recovery and i DIDNT backup my stock recovery . what should i do. ( i read something about EFS partition which contains IMEI info which was corrupted by custom recovery i believe ). and also please send me backup of recovery partition (or EFS) to me @ [email protected] i will set my own IMEI nos using Enginering Mode apk . this is my only phone please help me
Click to expand...
Click to collapse
thats why i was asking about android version....
bcoz all roms and recovery available for MI509 uses KITKAT kernel and you flashed it on Jellybean...
here i attach the stock recovery of jellybean....
for fixing IMEI use this link.........
This will fix it permanently...
IMEI TOOL with video tutorial....https://docs.google.com/uc?id=0B5DM6ZSz3dh-eTQzV2VWck1Kckk&export=download
Database- http://www.mediafire.com/download/no1oo8rroq4uqtr/Database.rar
use database file from second link bcoz this database is for spice mi509....
and next time dont flash rom if you have jellybean
Hey "Sourabh" did i "bricked" my phone???? and how to overcome that please.............
---------- Post added at 02:44 PM ---------- Previous post was at 02:03 PM ----------
Again Thanks for the reply, i just came to know that..... i should back up efs directory thank you very much for your support, i will let you know the status once i finish all the countermeasures.
epsan said:
Hey "Sourabh" did i "bricked" my phone???? and how to overcome that please.............
---------- Post added at 02:44 PM ---------- Previous post was at 02:03 PM ----------
Again Thanks for the reply, i just came to know that..... i should back up efs directory thank you very much for your support, i will let you know the status once i finish all the countermeasures.
Click to expand...
Click to collapse
If your device I bricked then just flash stock firmware using sp flash tool...if you don't know how to ...
Then give it to service centre but don't tell them about rooting and flashing custom rom...
Bcoz if you tell them then they will cost you money...
saurabh1234 said:
If your device I bricked then just flash stock firmware using sp flash tool...if you don't know how to ...
Then give it to service centre but don't tell them about rooting and flashing custom rom...
Bcoz if you tell them then they will cost you money...
Click to expand...
Click to collapse
Hey "Saurabh" you didddit. i tried using SPFTool and its working i was able to get my imei nos also(but it took me two days to figure it out). NOW how do i upgrade my mobile to KITKAT do you have that rom. can you please send me that link(stock rom).
epsan said:
Hey "Saurabh" you didddit. i tried using SPFTool and its working i was able to get my imei nos also(but it took me two days to figure it out). NOW how do i upgrade my mobile to KITKAT do you have that rom. can you please send me that link(stock rom).
Click to expand...
Click to collapse
Above was mistyping I was writing 'is' but leaved at 'i'. But thats no problem.
Below is stock kitkat firmware....flash through spflashtool...
https://docs.google.com/uc?id=0B1F4thoxIkjEb3pMT0N1UEhmQ00
When flashing firmware is done then root your mobile and install the philz recovery using flashify or mobile uncle tool to install custom rom...
saurabh1234 said:
Above was mistyping I was writing 'is' but leaved at 'i'. But thats no problem.
Below is stock kitkat firmware....flash through spflashtool...
https://docs.google.com/uc?id=0B1F4thoxIkjEb3pMT0N1UEhmQ00
When flashing firmware is done then root your mobile and install the philz recovery using flashify or mobile uncle tool to install custom rom...
Click to expand...
Click to collapse
Thank you very much "Saurabh" it really worked and i am running stock KITKAT now and will change it to custom rom very soon... again Thank you very much :good:
epsan said:
Thank you very much "Saurabh" it really worked and i am running stock KITKAT now and will change it to custom rom very soon... again Thank you very much :good:
Click to expand...
Click to collapse
i am always here to help...
and now i am uploading my new ORIGINAL LOLLIPOP ROM CM12.1 ...
and links will be available in two three days...
Could someone provide backup image of spice MI 509. My phone got stuck in a bootloader while changing font.
Is there any method to come out of the problem. Pls reply.
subash.ateet said:
Could someone provide backup image of spice MI 509. My phone got stuck in a bootloader while changing font.
Is there any method to come out of the problem. Pls reply.
Click to expand...
Click to collapse
download the stock rom from xda firmware site and then use flashtool in that zip to install the firmware in your mi509...it will boot... but u will lost your apps installed earlier...
saurabh1234 said:
download the stock rom from xda firmware site and then use flashtool in that zip to install the firmware in your mi509...it will boot... but u will lost your apps installed earlier...
Click to expand...
Click to collapse
Thanks Saurabh1234 for your reply.
How can I use flashtool in my mobile as it is stucking in bootloader? I can access only Recovery mode ( Power + Vol. down). Is there any method to install the firmware by Recovery mode(Power + Vol. down)?
I had already tried the SP flastool to flash my mobile but the software dont access/ read my mobile.
subash.ateet said:
Thanks Saurabh1234 for your reply.
How can I use flashtool in my mobile as it is stucking in bootloader? I can access only Recovery mode ( Power + Vol. down). Is there any method to install the firmware by Recovery mode(Power + Vol. down)?
I had already tried the SP flastool to flash my mobile but the software dont access/ read my mobile.
Click to expand...
Click to collapse
flashtool will work on your pc and laptop...
download firmware and then install drivers given in it in your pc then open your flashtool and load bootloader...
now connect your device to pc via data cable with or without battery ...
then click on download button in flashtool and press vol down on device.
then update will start..
check this link...
http://forum.xda-developers.com/android/general/rooting-cwm-firmware-spice-stellar-mi-t2969920
Trying to port PhilZ 6.59.0
Can you tell me how you ported PhilZ 6.57.9.......coz i'm trying to port PhilZ 6.59.0