Related
Huawei Ascend G6 - L11 How to Update to Kit Kat when the normal update does not work and gives error. (as happened to me from Rom B127 to B370 )
>>>>>>>>>>>> ALLWAYS HAVE A BACKUP AND A BACKUP FROM YOUR DEFAULT ROM!!!<<<<<<<<<<<<<<<<<<
----I am not responsible for any damage to your device. Everything here indicates was tested on my phone finding the same in perfect condition.----
>
I already flashed more than one time, in tests , doing the versions , etc. , and all ways work .
But, as in the other version , there are who may have difficultys ...
>
>
>>>B370_V3<<<
>
-->First need the unlocked bootloader :
Send the following e -mail to - [email protected] and [email protected]
Hi! My name is ( your name ), and I hereby request the bootloader code for my smartphone HUAWEI ASCEND G6 - (your default version) if possible .
Product SN : (It is on the back of the equipment )
IMEI : (on key pad *#06# )
Product ID : ( the key pad *#*#1357946#*#* )
Thank you for your attention
( Your name)
>
>
ABD Terminal - https://meocloud.pt/link/e2bcfbb5-1971-476d-b26c-1e5f8037e92f/ADB Terminal.zip/
>
TWRP. recovery - is in the ADB folder from above
>
copy the ROM to external SD Card. (see what is write in /data/custom.bin, open like a text file and choose the ROM with the same ref.)
if there is no ROM with your defenitions you can fix in the end of flash, choose B370_V3 and change vodafone to the first name you find in custom.bin, enter the folder and change the second folder name with the second name you find in custom.bin, exemple my was vodafone/pt, so my first folder is vodafone and the inside, the second folder, is pt. Always small fonts and do a factory reset.
>
> Turn OFF the phone
>press vol - and power (fastboot mode)
>extract ADB descktop and open it in cmd ( the cmd inside ADB is from windows 7 64BIT, if you use other version, go to c:\windows\system32 copy and replace in ADB folder)
>write in ADB:
fastboot flash recovery TWRP.img
> when finish the flash, press vol + and power
> go to install and choose your ROM
>install ( you can read the steps in flash, look at it)
>Phone reboot in to boot loop,
>press VOL + and dont release to go to recovery
>in recovery do factory reset, and do reboot system
>set defenitions in the phone (wifi, google,etc)
>reboot
>DONE
------------------------->What are the differences ?
> Comes with root (kingUser) and BusyBox
> The Clean version - No google apps and no default games ( apps can be found on google play)
> Full version - cames with all ( games, Facebook, etc)
>same build.prop tweaks
>better image
>faster
>and faster boot
Versions i made:
Vodafone PT Full version- https://meocloud.pt/link/ae253a50-b512-4fd9-9a55-24132a2401b7/Full__B370_V3.zip/
Vodafone PT clean version- https://meocloud.pt/link/46612166-3068-46aa-a4c9-58d9688b4c2d/Full_and_clean_B370_V3.zip/
Vodafone RO Full Version - https://meocloud.pt/link/40ebddae-1c21-4428-9c74-e3775144799d/VDF_RO_Full__B370_V3.zip/
Hw SPS Clean Version - https://meocloud.pt/link/9d8520dd-e0df-42d0-af9d-e07c92c86f21/hw_spc_Full_and_clean_B370_V3.zip/
>>>>>>>>>>>>>>>>>>>>>>>> NEW <<<<<<<<<<<<<<<<<<<<<<<<<<<< 23-04-2015
VDF_HU_Full_and_clean_B370_V3 --> https://meocloud.pt/link/c5d197da-0ae8-4815-b7a1-d8bc65a3f259/VDF_HU_CLEAN__B370_V3.zip/
HW_NORMAL_Full_and_clean_B370_V3 --> https://meocloud.pt/link/d5cebf99-a036-46c9-a483-7476e03d308c/HW_NORMAL_Full_and_clean_B370_V3.zip/
>
>
> If you whant to try a DEODEX ROM go here:
http://forum.xda-developers.com/ascend-g6/development/deodex-huawei-g6-l11-kitkat-t3093611
Enjoy
>
>
Bluetooh tethering is off by default but can be turned ON!
For those who lack the Bluetooth Tethering :
This in my case, go to /cust/vodafone/pt/prop/local.prop
look for ro.config.hide_bt_tethering , now change from true to false.
reboot.
Someone in Huawei thought we would no longer use it!
>
>
>
*Any Bug that you find please say.
There are many versions of the /cust , so it is possible that in the end, is missing Huawei applications like backup, and themes do not work, but can be repaired .
The ROM already have root, install the root browser , go to /data/custom.bin folder and open as text, in my custom.bin says vodafone/pt so my folder inside the /cust says vodafone, and the inside vodafone says pt. Change as it says on your custom.bin . Do a factory reset, Done.
Root Browser:
https://meocloud.pt/link/4b8303d5-1...r-com.jrummy.root.browserfree-223-v2.2.3.apk/
See the comments on Facebook:
https://www.facebook.com/groups/328261053999820/440388999453691/?notif_t=group_comment
persona78 said:
Huawei Ascend G6 - L11 Update to Kit Kat (From B127 to B370).
Good News for B127 users!
----I am not responsible for any damage to your device. Everything here indicates was tested on my phone finding the same in perfect condition.----
This is all tools and img you need:
https://meocloud.pt/link/1b4a9bd1-c9ad-4832-a366-b3522464f3fb/B127 to B370/
>B370_V2 is a ROM for Vodafone Pt (if you custom.bin says vodafone/pt)
>VDF_RO_B370_V2 is a ROM for Vodafone Ro (if you custom.bin says vodafone/ro)
In the end are missing apps, like clock, or themes dont work? Is because in /data/custom.bin says different than /cust from the ROMs from above, but dont have importance . You can fix it.
To fix /cust, in the end and with root, change the names in /cust folder, for the names in YOUR /data/custom.bin (open like a text file), use root browser to do it.
exemple in my /cust , first folder says vodafone" and inside "pt" because my custom.bin says "vodafone/pt". If yours says ee/es you must change "vodafone" to "ee" and "pt" to "es".
In the end YOU MUST DO a factory reset and all be fixed.
In my ADB TOOLS folder you have all ready system, twrp and default recovery img.
... For those who have already upgraded from the old tute ... you have to put the B127 again, only flash , nothing more, dont need to fix /cust.
(A) - Copy B127 dload folder to ext sd. With phone off press vol up + vol down + power, release power when turn on, release all when start.
ROM B127 (in case of emergency will need it) (A)
https://meocloud.pt/link/1403dc42-8...ei_Ascend_G6-L11_V100R001C00B127_General.rar/
Now:
Copy to external card the following:
>B370_v2.zip or VDF_RO_B370_V2
>UPDATE-Kinguser-3.4.0.zip (if you whant to root)
Open adb terminal ( attention , if you use a different version of windows than 7, you will have to copy c: \ windows \ system32 \ cmd.exe to adb terminal folder replacing what is there ), open by clicking cmd.exe.
Turn off the phone , press vol - and power to boot in fastboot:
Write this:
>fastboot flash recovery twrp.img
press vol + and power , install (B370_V2.zip) or (VDF_RO_B370_V2.zip), (DO NOT TURN OFF THE PHONE, YOU WILL BRICK, IF HAPPEN FLASH B127 AGAIN)
, press vol - and power AND DONT RELEASE!!!!!!!! RELEASE ONLY WHEN SEE FASTBOOT MODE!
write this:
fastboot flash system system.img
fastboot reboot
Turn ON ignore everything and make factory restore.
Congratulations! You are on B370, completed. laugh: )
To root:
Open adb terminal by clicking cmd.exe.
Turn off the phone , press vol - and power to boot in fastboot:
Write this:
>fastboot flash recovery twrp.img
press vol + and power
>install UPDATE-Kinguser-3.4.0.zip
Advise you to return to put the default recovery
Open adb terminal by clicking cmd.exe.
Turn off the phone , press vol - and power to boot in fastboot:
Write this:
>fastboot flash recovery recovery.img
>fastboot reboot
With root is possibel to remove system app like Facebook or games, use this app:
https://play.google.com/store/apps/details?id=com.jumobile.manager.systemapp&hl=en
Any Bug that you find please say.
See comments in Facebook: https://www.facebook.com/groups/328261053999820/permalink/440388999453691/
------------------------------------------------------------------------------------------------------------------
-----> (I think is possible to update other ROMs for the G6 - L11 . I cant test this.)
-----> (I think that also works in the L22 , L33 , as they have the same kernel than L11, and this update does not change the oesmbl signature . If someone try leave the feedback for other users.)
I can not make a promise to recover your default ROM because I never did before for this model above, but if you want to try to need you to do this first:
root:
install root browser
go to /dev/block and copy to sd card all files from mmcblk0p1 to mmcblk0p25 ( i dont remeber if 25 let copy...)
do it 1 by 1, than in pc do a zip, i you need may be i can do a recovery for your default ROM from this files.
Enjoy
Click to expand...
Click to collapse
Thanks, works great after I chaged my cust folder from Vodafone/pt to dt/pl :good:
You're welcome
mngt13 said:
Thanks, works great after I chaged my cust folder from Vodafone/pt to dt/pl :good:
Click to expand...
Click to collapse
I'm glad I helped you .
Works perfectly
Worked like a charm for me.
Thank you very much.
But I have a question.
I looked inside the zip file. It extracts the img files and writes them to the block devices which is a great idea. Bravo!
But why didn't you do the same thing for system.img? Why flashing it through fastboot?
Hi! In my first try I had system in zip, but phone bricks, I don't know way.
But I have a new versions, they are completed, one clean (no games, and no google apps like music, etc, etc) the other is normal, and came all ready rooted and with busibox. Build.prop came tweaked to.
I saw you uploaded some *FULL* versions as well and put system.img inside them.
Putting system.img inside the zip works? I thought maybe because of the huge size of system.img and the fact that G6-L11 has only 1GB of RAM, it might fail.
P.S.:
Why do you mount system and cust and then unmount them afterwards?
Mount and unmount to force and link data, and all works I flash more than one time this version.
Dont stay in Ram because write directly in the images.
Boot loop when reboot but when go to recovery it is fixed.
very nice work persona78, and thank you for the explanation.
Hi there persona, glad i found your tutorial. It saved me from the B127 hell!
Only one question, is there any way to solve the 4G issue. It is always there even if we turn of mobile data.
Btw, after we install the B370 can we downgrade to B118 or it will get stuck with B127 again? And of we can does it have to be with twrp or normal SD update?
Thanks in advance,
Queiroz
Hi! That is not a issu, if says 4G is because is plugged to 4G, don't mean is sending or receiving data, To switch network, go to short cut bar and press network data icon and dont release, in that menu you can change your net work, 2, 3,4G. From default update.app, no but I have a zip file to do, why roll back? The oesmbl from updates same times dont match and do issus. The zip do a bypass on oesmble check.
Wow that was a fast reply, thanks I thought it was a problem from the ROM. The only reason I wanted to downgrade was because I thought it was a "ROM bridge problem". Since huawei recommends that we upgrade from 118 to 370. Thanks a lot though.
Queiroz
They say to update from b118 because b370 have the same oesmble, but, like I say, my zip file do a bypass and ignore that
Could you please explain the difference between this versions?
VDF_HU_Full_and_clean_B370_V3 --> https://meocloud.pt/link/c5d197da-0a...__B370_V3.zip/
HW_NORMAL_Full_and_clean_B370_V3 --> https://meocloud.pt/link/d5cebf99-a0...n_B370_V3.zip/
The first is for Vodafone hu ( with /data/custom.bin vodafone/hu )
The sec is the default that came with rom ( with /data/custom.bin hw/normal )
persona78 said:
Huawei Ascend G6 - L11 How to Update to Kit Kat when the normal update does not work and gives error. (as happened to me from Rom B127 to B370 )
Works in others ROMs and phone versions( P7mini).
It does not work in L22 and L33 , although it is the same phone, but the provider configuration is totally different, frequencies , network codes, etc.
If someone able to change or create , it may be possible to upgrade .
L11 - Europe
L22 - Venezuela
L33 - Colombia
Sorry :\
>>>>>>>>>>>> ALLWAYS HAVE A BACKUP AND A BACKUP FROM YOUR DEFAULT ROM!!!<<<<<<<<<<<<<<<<<<
----I am not responsible for any damage to your device. Everything here indicates was tested on my phone finding the same in perfect condition.----
>
I already flashed more than one time, in tests , doing the versions , etc. , and all ways work .
But, as in the other version , there are who may have difficultys ...
>
>
>>>B370_V3<<<
>
-->First need the unlocked bootloader :
Send the following e -mail to - [email protected] and [email protected]
Hi! My name is ( your name ), and I hereby request the bootloader code for my smartphone HUAWEI ASCEND G6 - (your default version) if possible .
Product SN : (It is on the back of the equipment )
IMEI : (on key pad *#06# )
Product ID : ( the key pad *#*#1357946#*#* )
Thank you for your attention
( Your name)
>
>
ABD Terminal - https://meocloud.pt/link/986dfd7e-1d97-4458-9806-a576ceb90084/adb terminal/
>
TWRP. recovery - is in the ADB folder from above
>
copy the ROM to external SD Card. (see what is write in /data/custom.bin, open like a text file and choose the ROM with the same ref.)
if there is no ROM with your defenitions you can fix in the end of flash, choose B370_V3 and change vodafone to the first name you find in custom.bin, enter the folder and change the second folder name with the second name you find in custom.bin, exemple my was vodafone/pt, so my first folder is vodafone and the inside, the second folder, is pt. Always small fonts and do a factory reset.
>
> Turn OFF the phone
>press vol - and power (fastboot mode)
>open ADB in cmd ( the cmd inside ADB is from windows 7 64BIT, if you use other version, go to c:\windows\system32 copy and replace in ADB folder)
>write in ADB:
fastboot flash recovery TWRP.img
> when finish the flash, press vol + and power
> go to install and choose your ROM
>install ( you can read the steps in flash, look at it)
>Phone reboot in to boot loop,
>press VOL + and dont release to go to recovery
>in recovery do factory reset, and do reboot system
>set defenitions in the phone (wifi, google,etc)
>reboot
>DONE
------------------------->What are the differences ?
> Comes with root (kingUser) and BusyBox
> The Clean version - No google apps and no default games ( apps can be found on google play)
> Full version - cames with all ( games, Facebook, etc)
>same build.prop tweaks
>better image
>faster
>and faster boot
Versions i made:
Vodafone PT Full version- https://meocloud.pt/link/ae253a50-b512-4fd9-9a55-24132a2401b7/Full__B370_V3.zip/
Vodafone PT clean version- https://meocloud.pt/link/46612166-3068-46aa-a4c9-58d9688b4c2d/Full_and_clean_B370_V3.zip/
Vodafone RO Full Version - https://meocloud.pt/link/40ebddae-1c21-4428-9c74-e3775144799d/VDF_RO_Full__B370_V3.zip/
Hw SPS Clean Version - https://meocloud.pt/link/9d8520dd-e0df-42d0-af9d-e07c92c86f21/hw_spc_Full_and_clean_B370_V3.zip/
>>>>>>>>>>>>>>>>>>>>>>>> NEW <<<<<<<<<<<<<<<<<<<<<<<<<<<< 23-04-2015
VDF_HU_Full_and_clean_B370_V3 --> https://meocloud.pt/link/c5d197da-0ae8-4815-b7a1-d8bc65a3f259/VDF_HU_CLEAN__B370_V3.zip/
HW_NORMAL_Full_and_clean_B370_V3 --> https://meocloud.pt/link/d5cebf99-a036-46c9-a483-7476e03d308c/HW_NORMAL_Full_and_clean_B370_V3.zip/
>
>
> If you whant to try a DEODEX ROM go here:
http://forum.xda-developers.com/ascend-g6/development/deodex-huawei-g6-l11-kitkat-t3093611
Enjoy
>
>
Bluetooh tethering is off by default but can be turned ON!
For those who lack the Bluetooth Tethering :
This in my case, go to /cust/vodafone/pt/prop/local.prop
look for ro.config.hide_bt_tethering , now change from true to false.
reboot.
Someone in Huawei thought we would no longer use it!
>
>
>
*Any Bug that you find please say.
There are many versions of the /cust , so it is possible that in the end, is missing Huawei applications like backup, and themes do not work, but can be repaired .
The ROM already have root, install the root browser , go to /data/custom.bin folder and open as text, in my custom.bin says vodafone/pt so my folder inside the /cust says vodafone, and the inside vodafone says pt. Change as it says on your custom.bin . Do a factory reset, Done.
Root Browser:
https://meocloud.pt/link/4b8303d5-1...r-com.jrummy.root.browserfree-223-v2.2.3.apk/
See the comments on Facebook:
https://www.facebook.com/groups/328261053999820/440388999453691/?notif_t=group_comment
Click to expand...
Click to collapse
hi the ADB terminal link is down can you reupload it ? thank you
and does it also work on g6-U10?
Thank you, I will correct it.
The tutorial is for G6 L11 but ADB works in every model.
ADB FIXED!
yildirim400 said:
hi the ADB terminal link is down can you reupload it ? thank you
and does it also work on g6-U10?
Click to expand...
Click to collapse
Hi have fix the ADB link!
Hi, I flashed your Vodafone PT clean version with a success. Thank you!
I have a question:
Is EMUI 3.0 for g6 different from EMUI 3.0 on other devices?
As I saw that lockscreen on honor p6 have a settings icon thus can be customize whilst our doesn't. at least I haven't find a way to customize lockscreen. also there is magazine unlock feature missing from it.
Thank you.
The lock screen, that can be change with a theme, when you install a EMUI 3 theme, same settings like lock screen, or music widgets can be changed.
persona78 said:
Thank you.
The lock screen, that can be change with a theme, when you install a EMUI 3 theme, same settings like lock screen, or music widgets can be changed.
Click to expand...
Click to collapse
Thanks for the reply.
I found some P8 stock themes that includes unlock magazine feature and it works with g6 L11.
here is a link to mega:
https://mega.co.nz/#!zB0HxaCb!Yb7Q1ZfheM_Xt7o1Oe_WVks1mw9xbDV78FQ-BnqtHSc
file has 157.1 MB
>>>>>>>READ ALL TO THE END FIRST!<<<<<<
>
>>>>>>>>>>>If you ALL READY HAVE TRY IT AND FAIL, you can't flash B118 or B370 from dload folder, GO to this link:
http://forum.xda-developers.com/ascend-g6/general/g6-l11-b127-rom-how-to-upgrade-to-kit-t3079179
>
>
4.4.2 (B370) only can be upgraded from B118, its the base for B370 version, same oesmbl.
So, you need to install B118 first.
->Download B118
Official B118 ROM from Huawei Cambodia Server:
http://consumer.huawei.com/kh/support/products/downloads/detail/ascend-g6-4g-kh.htm?id=25971
Official B118 from Huawei French Server:
http://consumer.huawei.com/fr/support/downloads/detail/index.htm?id=24242
->->extract dload folder from B118
->paste in to external sd card the dload folder
->go to key pad and write this: *#*#2846579#*#*
-> Open ProjectMenu
->Upgrade
->SD card upgrade
Phone reboot and install B118
Now B370:
http://consumer.huawei.com/kh/support/products/downloads/detail/ascend-g6-4g-kh.htm?id=38361
->extract dload folder from B370.
->Delete dload from B118 from the external sd card and paste the dload folder from B370.
->go to key pad and write this: *#*#2846579#*#*
-> Open ProjectMenu
->Upgrade
->SD card upgrade
In the end will be miss same apps, themes dont work, etc... or you are a lucky man/woman and your custom.bin is the same than Cust folders!
TO FIX:
Need boot loader unlocked!
Request unlock code to Huawei by e-mail:
Hi!
My name is (your name) and I hereby request the bootloader code for my new smartphone HUAWEI ASCEND (your phone model) if possible.
Product SN: (In the backs)
IMEI: ( in key pad *#06# )
Product ID: ( in key pad *#*#1357946#*#*)
Thank you for your attention;
(your name)
This are the e-mails :
[email protected]; [email protected]
With luck only takes 1 day, bad luck from 1 week to 3 or more weeks...
---------> Or you can find it with DC-Unlocker
1. Download DC-Unlocker but only this version works, install it and reboot :
https://mega.nz/#!ykxjiRia!ppWG22acgv35N5j1VMTsZlKMi0i0JQB9v8BVn5l98WI
DC-unlocker-client-software-V1_00_1201
2. Turn ON debug mode
Go to Settings -> About phone -> Press several times Build number it will say "you are a developer now" -> go back and open Developer options ->Turn ON USB debugging -> DONE
3. Install ADB drivers with Hisuite ( best way ):
http://consumer.huawei.com/minisite/HiSuite_en/
The first time HiSuite try to connect with the phone, in the screen phone it will pop up a Windows requesting permissions for the connection with PC, MUST GIVE IT!
4. It need to enable USB Manufacturer Mode in phone:
In dial pad type code *#*#2846579#*#*
select "Project Menu"
"Background settings"
"USB ports settings"
"Manufacturer mode" (IF OPEN THE MENU TO CHOOSE THE USB CONNECTION PRESS RETURN TO GO BACK TO CONFIRME)
"CORFIRME"
And Reboot the phone,.
5. Connect Phone to usb (MY DEBUG MODE WAS ON AND USB FLASH DRIVE WAS SELECTED) and open DC UNLOCKER.
6. Select Huawei Phones in manufacturer and leave the model Auto detect
7. Click on the magnifing glass and wait for detection
8. You will see the bootloader code appears in the BOX bellow.
9. Use this software and the unlock bootloader option, 18 option:
https://mega.nz/#!S95yRYbY!vxh7daocU-_q4bXb4cu88b_UMqybJxt8Fh24z9mmcck
----------------------------------------
->With the code, download this:
ADB with Huawei_Bootloader_Unlocker, TWRP.img, RECOVERY.IMG and KingUser zip:
https://meocloud.pt/link/32ef02e9-4fd9-4963-ab33-622536ff34ff/ADB/
https://meocloud.pt/link/47a61397-d200-4862-bd99-1aa573fa8fe7/TWRP.img/
https://meocloud.pt/link/a630b21b-e2b4-4253-8ca3-f1a1aa3bd4cf/RECOVERY.img/
https://meocloud.pt/link/0d060247-9d19-471e-8848-4a9e5681cd1a/UPDATE-Kinguser-3.4.0.zip/
->ADB drivers are inside ADB_TOOLS, install them.
->Turn off the phone, press vol - and power, release power on boot, vol when you see fastboot screen.
->wait to PC install the phone.
http://s23.postimg.org/48y8249zv/Imagem1.jpg
->The first icon in Huawei_Bootloader_Unlocker is to check if device is connected, must expand the cmd window to see it, is the first window in the image from above, must have same thing like that.
-> copy the code to Huawei_Bootloader_Unlocker, easy to see where you are going to paste.
-> Phone reboot with out error msg if you have done correctly, if get error check the code.
->Copy Kinguser zip to External SD card
-> Turn off again
->Press vol - and power, release power on boot, vol when you see fastboot screen. Must say unlocked in the end of page.
->Now Open the folder inside ADB Tools, ADB_TOOLS, the cmd inside is from Windows 7 64 bit, if you have a diferent Windows, go to c:\windows\system32 and COPY to REPLACE the cmd in ADB_TOOLS
-> COPY TWRP.img in to ADB_TOOLS folder
->Execute cmd
->write this
fastboot flash recovery twrp.img
-> unplug usb, press vol+ and power, dont release, when boot release power, when you see TWRP screen release vol.
->go to install an look for kinguser zip, install it, phone reboot
->go to google play and look for root browser and install it.
->with root browser go to /data look for custom.bin, open like a text file, you will see same thing like ex: vodafone/pt , go to /cust now, inside cust change hw to the first name, in my case vodafone, open vodafone, inside change normal to second name, in my case pt, use small font!
>
---->Root Browser:
https://meocloud.pt/link/4b8303d5-1...r-com.jrummy.root.browserfree-223-v2.2.3.apk/
>
>
----->To recover the DTMF tone (in my case) go to /cust/vodafone/pt/xml look for hw_defaults.xml, open like a text file and find this line:
<integer settings.system.dtmf_tone="0" reset="true"/>
change to:
<integer settings.system.dtmf_tone="1" reset="true"/>
>
>
>
->Fix Bluetooh tethering:
This in my case, go to /cust/vodafone/pt/prop/local.prop
look for ro.config.hide_bt_tethering , now change from true to false.
-> turn off the phone
->copy the default recovery.img to ADB folder
->Press vol - and power, release power on boot, vol when you see fastboot screen.
->Execute cmd
->write this:
fastboot flash recovery recovery.img
fastboot reboot
-> To clean any bug do factory reset
--->End of story!!
DONE
>
>
------>>>>>>After install the ROM B370, fix cust, fix bluetooh tethering, etc,
YOU WANT A CLEAN ROM with NO root, etc, etc, you can do this:
>
->bootloader must be unlocked
->Paste default system.img in ADB folder
->Turn off the phone
->press vol - and power
-> Open ADB commands and write:
fastboot flash system system.img
-wait ot finish
->power off
->power on
->NOW YOU HAVE A DEFAULT ROM, NO ROOT, ETC, ETC.
-> If you have DEFAULT recovery do factory reset to wipe/fix data for default ROM
-> If you have TWRP, reboot in TWRP and do factory reset in there.
>
>
>
>
B370_default_SYSTEM_and_RECOVERY
https://meocloud.pt/link/1d7a17b2-90d8-41ba-aa5e-7e937f96180a/B370_default_SYSTEM_and_RECOVERY/
>
>
>>>>>>>>>>>If you FAIL in the beginning, you can't flash B118 or B370 from dload folder, GO to this link:
http://forum.xda-developers.com/ascend-g6/general/g6-l11-b127-rom-how-to-upgrade-to-kit-t3079179
persona78 said:
>>>>>>>READ ALL TO THE END FIRST!<<<<<<
>
>>>>>>>>>>>If you ALL READY HAVE TRY AND FAIL, you can't flash B118 or B370 from dload folder, GO to this link:
http://forum.xda-developers.com/ascend-g6/general/g6-l11-b127-rom-how-to-upgrade-to-kit-t3079179
>
>
4.4.2 (B370) only can be upgraded from B118, its the base for B370 version, same oesmbl.
So need to install B118 first.
->Download B118
Official B118 ROM from Huawei Cambodia Server:
http://consumer.huawei.com/kh/support/products/downloads/detail/ascend-g6-4g-kh.htm?id=25971
Official B118 from Huawei French Server:
http://consumer.huawei.com/fr/support/downloads/detail/index.htm?id=24242
->Extract to external sd card the dload folder
->go to key pad and write this: *#*#2846579#*#*
-> Open ProjectMenu
->Upgrade
->SD card upgrade
Phone reboot and install B118
Now B370:
http://consumer.huawei.com/kh/support/products/downloads/detail/ascend-g6-4g-kh.htm?id=38361
->Delete dload from B118 and extract to external sd card the dload folder from B370.
->go to key pad and write this: *#*#2846579#*#*
-> Open ProjectMenu
->Upgrade
->SD card upgrade
In the end will be miss same apps, themes dont work, etc... or you are a lucky man/woman and your custom.bin is the same than Cust folders!
TO FIX:
Need boot loader unlocked!
Request unlock code to Huawei by e-mail:
Hi!
My name is (your name) and I hereby request the bootloader code for my new smartphone HUAWEI ASCEND (your phone model) if possible.
Product SN: (In the backs)
IMEI: ( in key pad *#06# )
Product ID: ( in key pad *#*#1357946#*#*)
Thank you for your attention;
(your name)
This are the e-mails :
[email protected]; [email protected]
With luck only takes 1 day, bad luck from 1 week to 3 or more weeks...
->With the code, download this:
ADB with Huawei_Bootloader_Unlocker, TWRP.img, RECOVERY.IMG and KingUser zip:
https://meocloud.pt/link/32ef02e9-4fd9-4963-ab33-622536ff34ff/ADB/
https://meocloud.pt/link/47a61397-d200-4862-bd99-1aa573fa8fe7/TWRP.img/
https://meocloud.pt/link/a630b21b-e2b4-4253-8ca3-f1a1aa3bd4cf/RECOVERY.img/
https://meocloud.pt/link/0d060247-9d19-471e-8848-4a9e5681cd1a/UPDATE-Kinguser-3.4.0.zip/
->ADB drivers are inside ADB_TOOLS, install them.
->Turn off the phone, press vol - and power, release power on boot, vol when you see fastboot screen.
->wait to PC install the phone.
http://s23.postimg.org/48y8249zv/Imagem1.jpg
->The first icon in Huawei_Bootloader_Unlocker is to check if device is connected, must expand the cmd window to see it, is the first window in the image from above, must have same thing like that.
-> copy the code to Huawei_Bootloader_Unlocker, easy to see where you are going to paste.
-> Phone reboot with out error msg if you have done correctly, if get error check the code.
->Copy Kinguser zip to External SD card
-> Turn off again
->Press vol - and power, release power on boot, vol when you see fastboot screen. Must say unlocked in the end of page.
->Now Open the folder inside ADB Tools, ADB_TOOLS, the cmd inside is from Windows 7 64 bit, if you have a diferent Windows, go to c:\windows\system32 and COPY to REPLACE the cmd in ADB_TOOLS
-> COPY TWRP.img in to ADB_TOOLS folder
->Execute cmd
->write this
fastboot flash recovery twrp.img
-> unplug usb, press vol+ and power, dont release, when boot release power, when you see TWRP screen release vol.
->go to install an look for kinguser zip, install it, phone reboot
->go to google play and look for root browser and install it.
->with root browser go to /data look for custom.bin, open like a text file, you will see same thing like ex: vodafone/pt , go to /cust now, inside cust change hw to the first name, in my case vodafone, open vodafone, inside change normal to second name, in my case pt, use small font!
>
---->Root Browser:
https://meocloud.pt/link/4b8303d5-1...r-com.jrummy.root.browserfree-223-v2.2.3.apk/
>
>
----->To recover the DTMF tone (in my case) go to /cust/vodafone/pt/xml look for hw_defaults.xml, open like a text file and find this line:
<integer settings.system.dtmf_tone="0" reset="true"/>
change to:
<integer settings.system.dtmf_tone="1" reset="true"/>
>
>
>
->Fix Bluetooh tethering:
This in my case, go to /cust/vodafone/pt/prop/local.prop
look for ro.config.hide_bt_tethering , now change from true to false.
-> turn off the phone
->copy the default recovery.img to ADB folder
->Press vol - and power, release power on boot, vol when you see fastboot screen.
->Execute cmd
->write this:
fastboot flash recovery recovery.img
fastboot reboot
-> To clean any bug do factory reset
--->End of story!!
DONE
>
>
------>>>>>>After install the ROM B370, fix cust, fix bluetooh tethering, etc,
YOU WANT A CLEAN ROM with NO root, etc, etc, you can do this:
>
->bootloader must be unlocked
->Paste default system.img in ADB folder
->Turn off the phone
->press vol - and power
-> Open ADB commands and write:
fastboot flash system system.img
-wait ot finish
->power off
->power on
->NOW YOU HAVE A DEFAULT ROM, NO ROOT, ETC, ETC.
-> If you have DEFAULT recovery do factory reset to wipe/fix data for default ROM
-> If you have TWRP, reboot in TWRP and do factory reset in there.
>
>
>
>
B370_default_SYSTEM_and_RECOVERY
https://meocloud.pt/link/1d7a17b2-90d8-41ba-aa5e-7e937f96180a/B370_default_SYSTEM_and_RECOVERY/
>
>
>>>>>>>>>>>If you FAIL in the beginning, you can't flash B118 or B370 from dload folder, GO to this link:
http://forum.xda-developers.com/ascend-g6/general/g6-l11-b127-rom-how-to-upgrade-to-kit-t3079179
Click to expand...
Click to collapse
I followed instructions and flashed B370. Now my home button is not working
You have G6 L11?
persona78 said:
You have G6 L11?
Click to expand...
Click to collapse
G6-L33
"the same as L22 and L11"
Sorry, Its the same is true, but this is for Europe and files are diferent from Colombia, thats way the issue..
It does not work in L22 and L33 , although it is the same phone with the same kernel, but the provider configuration is totally different, frequencies , network codes, etc.
I did not know because no one yet with these models had reported , I found this incompatibility shortly ...
If someone able to change or create , it may be possible to upgrade .
L11 - Europe
L22 - Venezuela
L33 - Colombia
Sorry :\
works great . thanks a lot man
i updated to B370 successfuly, everything working fine except Motion Control. when i go to "Motion Control" in Settings, there is nothing there (a blank white screen).
I remember this problem was in P6 EMUI 3 too and a patch was there to fix it. any patches for G6?
Same thing goes rong. Sensors must work! Or pictures rotate?
If not, flash b118 again, than b370. Don't forget factory reset after change cust folders names.
:good:
Excellent guide, you did a summary of four different things in one and easy to understand. For your mastery of the subject I wanted to ask your help to use my Huawei G6-U00 with firmware of China, which has unlocked WCDMA 1900 MHz band, so I can not use the phone in 3G in Venezuela.
Is there a way to unlock it?
I have tried to Engineer Mode, but it asks a code that is not known Huawei (0, 0000, 1234), . Also I tried the QPST program, but despite being recognized as a modem, do not read as a telephone and does not communicate with the RF_NV_Item_Manager.
Thanks in advance!!
Mario
Hmmm, unlock bootloader, root it and do backup from your ROM. than try b136 u251 rom, from colombia. You can use g6sknife to do backup (need root).
oemsbl version list check error!
persona78 said:
Hmmm, unlock bootloader, root it and do backup from your ROM. than try b136 u251 rom, from colombia. You can use g6sknife to do backup (need root).
Click to expand...
Click to collapse
I have Bootloader unlocked, Rooted, and CWM as Recovery.
I installed G6-U251 B136 dload in SDcard, Note ( in my U00), and gave me the following errors; oemsbl version list check error!, ?V write data error, Error; Update.app is an invalid package, Sd card update failure, SD card update abort.
I used the default recovery cause the CWM asks a zip file. and I unzipped the file and place it in the folder Dload in SDcard.
Any advice?
marioarnaldo1965 said:
I have Bootloader unlocked, Rooted, and CWM as Recovery.
I installed G6-U251 B136 dload in SDcard, Note ( in my U00), and gave me the following errors; oemsbl version list check error!, ?V write data error, Error; Update.app is an invalid package, Sd card update failure, SD card update abort.
I used the default recovery cause the CWM asks a zip file. and I unzipped the file and place it in the folder Dload in SDcard.
Any advice?
Click to expand...
Click to collapse
Oesmble...
Only if same one extract u251 images from phone and create a flash zip.
Try in huawei g6 development, in Facebook.
Sent using XDA One
Oesmble problem
persona78 said:
Oesmble...
Only if same one extract u251 images from phone and create a flash zip.
Try in huawei g6 development, in Facebook.
Sent using XDA One
Click to expand...
Click to collapse
I belong to this group in Face.. And there isn´t answer yet!!. Which Tool should i use to debrand the u251.? i don´t know if is it possible to flash the radio part of the rom in my default ROM!!... What do you think?
thanks in advance!!
marioarnaldo1965 said:
I belong to this group in Face.. And there isn´t answer yet!!. Which Tool should i use to debrand the u251.? i don´t know if is it possible to flash the radio part of the rom in my default ROM!!... What do you think?
thanks in advance!!
Click to expand...
Click to collapse
After you do backup with g6sknife, there is a tool you can use, is the rom extractor, is in g6skinfe to.
Extract system, cust modems.
Copy system to cmd folder, boot in fastboot (bootloader), use cmd option, than flash system if fail you need to restore your backup, because you stay with out system, if you get success, put cust and modems in backup zip and use cwm to flash it. If you get success to, you need to change cust to your provider.
Sent using XDA One
G6_L11 problem after update...
Hello...
I have a G6-L11, Digitel Venezuela ...
Since I did ROM upgrade, the gyroscope and proximity sensors do not work, either lighting and ...
What can I do..??
problem with g6 rom
hi
i hope someone can help me with a little problem on my Huawei G6 smartphone.
the model is a G6-U10
but currently i have a U00 rom installed (B370, downloaded from the official Huawei site, probably the Chinese one)
installation of this rom went smooth, but this build has some serious shortcomings, so i wanted to install another rom. but that appears to be impossible!
I tried several U10, C00 and L11 roms, ranging from build B118, B193, B261,B330 and B370. most download from the official Huawei servers. and I also tried rollbacks, (U10 B360 to B136 and L11 B370 to B118), but nothing seems to work.
mostly i get the message "version list error" with some other things.
it's weird that i managed to install a U00 rom on a U10 device, but now it seems that i can't install anything from other models than U00 ánd roms that are older than the current one (B370), which is the problem, because this is the newest i think... so i can't find any other rom that i can install...
the phone is not rooted. i tried is with Vroot and Rood Genius, but it didn't work. why, i don't know. i don't even know what i precisely would do when the phone is rooted... but that's another story
I really want to install a proper working (preferably EU) rom on my G6, and at this point it doesnt matter to me how old the build is...
problem with the current rom U00 B370 is mostly this:
i can't add my Google account for the phones' contacts
play store can't install any apps
can anyone help me? cant i rollback to a better build or something?
freduce said:
hi
i hope someone can help me with a little problem on my Huawei G6 smartphone.
the model is a G6-U10
but currently i have a U00 rom installed (B370, downloaded from the official Huawei site, probably the Chinese one)
installation of this rom went smooth, but this build has some serious shortcomings, so i wanted to install another rom. but that appears to be impossible!
I tried several U10, C00 and L11 roms, ranging from build B118, B193, B261,B330 and B370. most download from the official Huawei servers. and I also tried rollbacks, (U10 B360 to B136 and L11 B370 to B118), but nothing seems to work.
mostly i get the message "version list error" with some other things.
it's weird that i managed to install a U00 rom on a U10 device, but now it seems that i can't install anything from other models than U00 ánd roms that are older than the current one (B370), which is the problem, because this is the newest i think... so i can't find any other rom that i can install...
the phone is not rooted. i tried is with Vroot and Rood Genius, but it didn't work. why, i don't know. i don't even know what i precisely would do when the phone is rooted... but that's another story
I really want to install a proper working (preferably EU) rom on my G6, and at this point it doesnt matter to me how old the build is...
problem with the current rom U00 B370 is mostly this:
i can't add my Google account for the phones' contacts
play store can't install any apps
can anyone help me? cant i rollback to a better build or something?
Click to expand...
Click to collapse
First, if you have a U10 why you flash a U00 ROM? ...
Google G6 U10 b146, try to install it.
Tell if you made it?
G6 ROMS
There are a lot of steps to do.. Open Bootloader, Root the Phone, Install Custom Bootloader, Flash a new Rom for G6-U10.
All these Steps are full Explained in GG Development Group in Facebook.
Send a request join message, and in Pinned Post. Read , read and read. There are a lot of information and a ROM that fit your ROM. What does it mean UE in your Question? United States? Union Europa´s? the ROMS are quite different.
.....
some of these links have been 'removed'
please
can you like please fix the link
:good:
I'm new user in this forum.
I have the g6-u251 version, and My question is that i don't know how install the u10 B330 version update. Please help me!
POR FAVOR AYUDEN
ANDROID 4.4 EMUI 3 IN ASCEND G6 U251?
I dont now if works..., and this is B360!
dvf1278 said:
I'm new user in this forum.
I have the g6-u251 version, and My question is that i don't know how install the u10 B330 version update. Please help me!
POR FAVOR AYUDEN
ANDROID 4.4 EMUI 3 IN ASCEND G6 U251?
Click to expand...
Click to collapse
ROM B360 AVAILABLE for G6-U10.
-----
- Download official B136 Rom from austrian Huawei site
http://download-c.huawei.com/downlo...343&version=54000&siteCode=at&hc_location=ufi
- Extract the dload folder to PC and copy to SD card.
- Go to Options→System Info→Update System→Local Update
---- Phone will reboot in recovery mode and install the update. At the end you'll have Emui 2.0 JellyBean Rom B136 as your system
------------ If you previously flashed a custom recovery (i.e. CWM or TWRP) deleting the stock one, you'll get an error similar to "E:Invalid command argument". You have two solutions:
---------------- 1)Turn off the phone, press Volume DOWN+Volume UP+Power buttons, release power on boot, vols when start to flash it.
---------------- 2)Download this, is the original recovery image, https://docs.google.com/file/d/0B0xf81pxOQgxTVpxU3RaTWNyRWc/edit and flash it by fastboot with ADB,
fastboot flash recovery recovery.img
- Now reboot the phone and it should notifies of an available update to KitKat, rom B360. Simply accept the update.
- If update doesn't get proposed, download this file:
update.zip - https://drive.google.com/file/d/0B0xf81pxOQgxcWs1QVlLNllPVlE/view?usp=sharing&hc_location=ufi&pli=1
- Put the archive update.zip into "HwOUC" folder inside the sd-card, if dont have it you can created
- Go to Options→System Info→Update System→Local Update
---- Your system will be updated to Emui 3.0 KitKat Rom B360.
------If not, turn off the phone, press vol UP and power, clean cache and go to update by zip, look for the file update.zip
------Done
If you have missing apps in the end, to fix you need bootloader unlocked:
!!!!!!»»»»»»»»»»»How to Unlock your bootloader««««««««««««!!!!!
1º Request code to Huawei by e-mail
Ex:
" Hi!
My name is (your name) and I hereby request the bootloader code for my new smartphone HUAWEI ASCEND (your phone model) if possible.
Product SN: (In the backs)
IMEI: ( in key pad *#06# )
Product ID: ( in key pad *#*#1357946#*#*)
Thank you for your attention;
(your name) "
->This are the e-mails (Use the PC, is better) :
[email protected]; [email protected]
PS: When copy paste to send it, please change what is inside of ( ), there are how send it like it is!!!!! Belive me, you never, never,never gona recive anything if goes like this!!!!
When you get the code!
You need ADB!
This one have already a software to unlock the phone
( Huawei_Bootloader_Unlocker ). and , than press "Desbloquear":
https://meocloud.pt/link/32ef02e9-4fd9-4963-ab33-622536ff34ff/ADB/
Only need to extract ADB folder from zip to desktop
--------------------------------------------------------------------------------
-with phone ON, turn on debug mode, open ADB_TOOLS folder and execute Boot_in_fastboot_mode.exe
»»»» OR
->Turn off the phone
->press vol - and power, release power on boot, release vol when you see the fastboot screen
--------------------------------------------------------------------------------
->plug the usb, let pc install the phone
->see if pc find the phone, execute See_if_phone_is_recognized.exe
-> must say samething like - 584566515 fastboot
-> if not, you must install the drivers for the phone or change the usb door.
->execute Huawei_Bootloader_Unlocker from the folder ADB TOOLS
->insert the code where says "Unlock code"!
->click in "desbloquear!"
->phone reboot and do a factory reset.
->Done
Now you need CWM recovery and kinguser.zip to root, Download this files:
-CWM-U10.zip:https://mega.co.nz/#!XpYxGC6D!K0dE4-sr7LmauOrVTRwlE5Qx8eX-mKfqNkTXteUkrTU
-UPDATE-Kinguser-3.4.0:https://mega.co.nz/#!bhp2AZyL!6R1zHtVrWC08tkHAcxv5XtwfjZjx_VbjV3qH2ezELuo
1. Unlock bootloader: https://www.facebook.com/groups/huawei.g6.development/permalink/457458214413436/
2. Download adb if you dont have it, from the link above:
3. extrad ADB TOOLS from zip to desktop, open it and open ADB_TOOLS
4. In PC go to c:\Windows\System32 look for cmd, COPY and paste in ADB_TOOLS.
5. Press volume down and power button to go in fastboot mode, and plug the phone in to PC.
6. Open cmd (doble click in cmd)
7. Type this:
Fastboot flash recovery CWM.img
fastboot reboot
8. Copy "UPDATE-Kinguser-3.4.0.zip" to your SD CARD
9. Turn OFF the phone, press vol + and power, release power on boot to go to recovery mode CWM
10. clear cache
11. Press install zip from sd card
12. Click update UPDATE-Kinguser-3.4.0.zip
13. wait for confirmation and after that when it complete REBOOT your phone
14. After rebooting go to Google play and install any root checker to see if is OK.
Now fix Cust:
The Roms are created for a specific provider , with a specific configuration. A ROM can be compatible with various models , such as U10 with the U251 , L11 with P7mini or even between the same zone countries .
But in the end we find small problems , such as lack of Shortcut Bar in version 4.3 and lack of applications in version 4.4 ! It has to do with the configuration of the CUST folder. How to fix ? We need access ROOT and an explorer as the Root Browser , which can be found in Google Play.
With Root Browser, in this case, we will go to folder /DATA and seek the custom.bin file, open it as a text file, you will see something such as vodafone/pt, for example, now we left the folder /DATA and go to the folder /CUST , we open it and we will usually find a folder with the name hw, we will change the name of it to the first name that we saw in custom.bin in our example will is vodafone, use small font, now we entered the vodafone folder and we will find another folder that usually his name is normal, let's switch to the second name of our exemple which will be pt, use small font!
Now just leave the Root Browser , turn off your phone , enter the recovery , perform a factory reset and start the phone normally.All will be fixed.
Tell if works!
like write data
[Hi, I have the g6 u251 but when i try to install it, says something like write data error update.app is a invalid package, how do i fix it?
Hello Guys,
after the update to 5.1.1 I bricked my Honor 6. I tried to unbrick it with the multi tool but it dont works...
I can access fastboot and the bootloader is unlocked. Can I rescue my phone?
Daranto
Try to unlock the bootloader http://forum.xda-developers.com/showpost.php?p=57271243&postcount=5 with this and tell me if you succeeded
cheptii said:
Try to unlock the bootloader http://forum.xda-developers.com/showpost.php?p=57271243&postcount=5 with this and tell me if you succeeded
Click to expand...
Click to collapse
My Bootloader is unlocked? Look at my first post.
Daranto
Great then you can unbrick it easily , http://forum.xda-developers.com/honor-6/general/revert-h60-l04-emui-3-1-to-emui-3-0-t3142268 follow the steps in this post
cheptii said:
Great then you can unbrick it easily , http://forum.xda-developers.com/honor-6/general/revert-h60-l04-emui-3-1-to-emui-3-0-t3142268 follow the steps in this post
Click to expand...
Click to collapse
Hey,
I would not create a new thread if I not tried everything that is posted in the Honor 6 forum. Nothing worked.
I tried to unbrick over multi tool and I tried to do the steps above. No luck.
If someone can help me that would be nice.
Daranto
Which version do you have ? H60- .. ?
H60-L04
1- Download the multi-tool & Huawei update extractor
2- Download the B370 & B309 Downgrade packet from http://www.hihonor.com/fr/pages/support#?view=downloads
3- Open Huawei update extractor and extract BOOT& CUST & RECOVERY & SYSTEM and copy them to the Folder 'Unbrick' in the multi-tool folder
4- Open the multi-tool and and go to the fastboot in your phone , then follow the steps in multi-tool for the unbrick (-6 Unbrick)
5-When its done , dont turn off the phone download BOOT & RECOVERY from this link LINK (hxxps://drive.google.com/file/d/0BzujZI5OEVIRWWxyLXNjRGNWb3c/view?usp=sharing
replace xx with tt)
6- Extract the files in a folder then Shift + right click and open cmd in the folder then Type ' fastboot flash boot boot.img' after that type fastboot flash recovery recovery.img
7- Turn off the phone and PUT B309 UPDATE.APP in dload folder in SD CARD
8- BOOT device with 3buttons UNPLUGGED from USB and SD card UNMOUNTED , When you get installation screen MOUNT SD card As Far As Possible (sometimes it takes 3 or 4 tries to access the setup via the 3 buttons so be patient)
9- PUT B370 UPDATE.APP (Extract it again , the 1st one will be missing some data) dload folder in SD CARD and BOOT device with 3buttons UNPLUGGED from USB and SD card UNMOUNTED When you get installation screen MOUNT SD card As Far As Possible (sometimes it takes 3 or 4 tries to access the setup via the 3 buttons so be patient) (AGAIN)
and im sure that it works
Hello friends
I had a Huawei Pra-La1 stuck in error mode After Flash.
Searched everywhere for fix but no fix.
flash many firmwares but no change
read many theards but no way
Flashed TWRP Not Worked
OK,Talking enough,Let's Do it:
***i'm Not responsible for any damage to your phone,And It's Just tested On PRA-LA1
Just Read This Theard,No Need Flash Twrp
No Need Any Box,No Need Bootloader Unlock
Nothing, Just Read Carefully.****
Prerequisites:
-Drivers & Hi-silicon Board Software Flasher(Link)(A .mp4 file in the compressed File Show you How does software works)(LINK)
-SD Card 8GB or Higher
-Board Software(MEGA LINK)
-Firmware1(Pra-La1C185B220) Thanks to CombineFILE
-Firmware2(latest Build that you can download)(Download it yourself)
--------------------------------------------------------
1.Flashing BoardSoftware
****The BoardSoftware That i link here is multimodel support (PRA-AL00 PRA-AL00 PRA-AL00I PRA-AL00X PRA-L01 PRA-L01 PRA-L03 PRA-L11 PRA-L11C PRA-L11I PRA-L21 PRA-L21 PRA-L21 PRA-L23 PRA-L31 PRA-L31C PRA-L31HN PRA-LA1 PRA-LA1 PRA-LX1 PRA-L11 Prague-L11 PRA-L31 Prague-L31 PRA-LX1 PRA-LX1 PRA-LX2 PRA-LX3 PRA-TL00 PRA-TL00C PRA-TL00R PRA-TL10) *****
****THIS FILE HELP YOU IF YOU BRICKED YOUR PHONE,A BRICKED HUAWEI PHONE MEANS WHEN YOU CONNECT IT TO PC YOU JUST HAVE A BLACK SCREEN AND IN DEVICE MANAGER SHOW IT AS "HUAWEI USB COM1.0***
***If YOU Get Error Mode In some Cases YOU Can enter Fastboot Forget it.it dont help you and after you get this error you cant do dload upgrade as it named *Upgrade* and we want to do downgrade without box by boardsoftware.You Should open the phone and use TP For Flashing The Boardsoftware****
HOW TO CONNECT TO HUAWEI USB COM1.0 MODE:
1.EXTRACT BOARDSOFTWARE FLASHER FOLDER INSTALL (HUAWEI_USB_COM_1.0_DRIVER)
2.OPEN PHONE
3.FIND THIS PINOUT ON BOARD LIKE TP PICTURE
4.CONNECT PHONE TO PC AND TAKE A METAL ON IT(PHONE SCREEN SHOULD GOING OFF AFTER SOME REBOOTS AND DEVICE MANAGER FIND PHONE WITH "HUAWEI USB COM1.0"
PRA-LA1 Testpoint
4.OK AFTER GOING TO NEEDED MOD,ON THE BOARDSOFTWARE FOLDER EXTRACT (IMAGE Download Software - IDT_V2.0.0.9)
5.EXTRACT BOARDSOFTWARE(HL1PRAMAA001052_Board Software_general_Android 7.0_EMUI 5.0.ZIP)
6.AN OTHER (.TAR.GZ) FILE IN IT EXTRACT IT THEN YOU CAN BOARDFIRMWARE FILES
7.A MP4 FILE STORED IN THE FLASHER&DRIVER ARCHIVE SHOW YOU HOW TO FLASH IT.
GOOD LUCK
*****NOW YOU UNBRICKED YOURE PHONE AND PHONE WORKS BUT IT DONT HAVE A NORMAL FIRMWARE IT'S BOARDSOFTWARE YOU SHOULD FLASH THE BEST FILE YOU HAVE,I FLASHED 3 FILES AND JUST ONE OF THEM WORKED FOR ME, I STORED THE FILE I USED FOR YOU (FIRMWARE1 AT PREREQUISITES)
------------------------------------------------------------------------------------------------------------------------
FIRMWARE FLASHING:
******The Firmware is Android7 for Pra-La1 Only don't flash it on other model *****
****if you have any other model of this Phone Based on model i said on board firmware part download android 7 for them and fix them****
1.DOWNLOAD THIS FIRMWARE(IT'S THE FIRMWARE LINKED UPER IN PREREQUISITES DON'T DOWNLOAD IT AGAIN(LINK)
2.EXTRACT IT,AGAIN AN (.TAR.GZ) ARCHIVE IN IT EXTRACT THAT
3.COPY "dload" FOLDER IN MAIN DIRECTORY OF YOUR SD CARD(SDCARD FORMAT SHOULD BE FAT32)
4.TURN OFF THE PHONE,DISCONNECT THE PHONE FROM PC,CONNECT IT TO CHARGER
5. PUSH VOLUME UP & DOWN AND POWER FOR TWO SECOND RELEASE POWER BUTTON AND HOLD VOLUME BUTTONS UNTIL PHONE GOING TO UPGRADE BY SD MODE LET IT UPDATE AND DONT DISCONNECT CHARGER.
6.WHEN DONE PHONE REBOOTS
7.THIS FIRMWARE RESTORE ORIGINAL USER SYSTEM BUT NOT A COMPLETE FIRMWARE FOR EXAMPLE YOU CANT FACTORY RESET NO GOOGLEPLAY NO FILE MANAGER AND ....
8.DOWNLOAD LATEST FIRMWARE PLACE IT IN DLOAD FOLDER AND DO DLOAD UPGRADE BY THIS CODE ("*#*#2846579#*#*" ) WHEN YOU ENTER IT IN DIALER A MENU COMES ONE OF OPTIONS SAY (SOFTWARE UPGRADE/SD CARD UPGRADE) PHONE REBOOTS AND GOING TO UPGRADE MODE.
****IF ANY ERRORS SAY "TP NOT FOUND" WHEN YOU WANT UPGRADE BY SDCARD IT'S NOT IMPORTANT.ACCEPT IT.
9.AFTER UPGRADE FACTORY RESET DEVICE
AS YOU CAN SEE UPGRADE DONE AND PHONE WORKS COMPLETELY WITHOUT ERROR MODE OR STUCK ON LOGO .
GOOD LUCK
If this theard Helped you Push Like/Thank Button.
big big big big thanks
im glad if can help someone fix his problem good luck