Database Info

Custom ROM B370 for Huawei Ascend G6 - L11 (P7mini to)

Hi!
I want to share with you the sum of all that I have learned and created with this ROM.
What 's so special about this ROM ?
She's all ready with root, busybox , custom theme , bluetooh tethering (is missing in default ROM) and deodexed. :good:
How to install???
>
>>>>>>>>>>>> ALLWAYS HAVE A BACKUP AND A BACKUP FROM YOUR DEFAULT ROM!!!<<<<<<<<<<<<<<<<<<
>
>
It does not work in L22 and L33 , although it is the same phone, but the provider configuration is totally different, frequencies , network codes, etc.
If someone able to change or create , it may be possible to upgrade .
L11 - Europe
L22 - Venezuela
L33 - Colombia
Sorry :\
>
>
This is made for vodafone pt, if you flash and you are not vodafone pt, same app gona miss and themes dont work, but you cand change to yours to fix it. :laugh:
How???
With root, go to /data/custom.bin, see what says in there. write in paper if you need it.
In the end of flash, install root browser, go to /cust folder, and rename vodafone with the first name you find in custom.bin, enter in folder and rename pt with the second name you find custom.bin. do factory reset. Use small fonts!
>
>
>
----I am not responsible for any damage to your device. Everything here indicates was tested on my phone finding the same in perfect condition.---
>
>
To Flash:
Need:
Bootloader unlocked, if you dont have it, Send the following e -mail to:
[email protected] and [email protected]
>
Hi! My name is ( your name ), and I hereby request the bootloader code for my smartphone HUAWEI ASCEND G6 -((write your version)) if possible .
Product SN : (It is on the back of the equipment )
IMEI : (on key pad *#06# )
Product ID : ( on key pad *#*#1357946#*#* )
Thank you for your attention
( Your name).
>
>
With bootloader unlocked Fastboot mode must says UNLOCKED in the end of page
>
ABD Terminal --> https://meocloud.pt/link/986dfd7e-1d97-4458-9806-a576ceb90084/adb terminal/
>
TWRP. recovery - is in the ADB folder already (and before flash it you can do a backup first with it)
>
copy DEODEX_B370_V3.zip to external SD card.
>
> Turn OFF the phone
>
>press vol - and power (fastboot mode)
>
>open ADB in cmd ( the cmd inside ADB is from windows 7 64bit, if you use other version, go to c:\windows\system32 copy and replace in ADB folder)
>
>write in ADB:
fastboot flash recovery TWRP.img
>
> when finish the flash, press vol + and power to go to TWRP recovery.
>
> go to install and choose DEODEX_B370_V3.zip
>
>install ( you can read the steps in flash, look at it)
>
>the phone automatically restarts
>
> Phone boot loop, press VOL + and dont release to go to recovery
>
>do factory reset and do reboot system
>
>set defenitions in the phone (wifi, google,etc)
>
>reboot
>
>DONE
>
-------->ROM:
https://meocloud.pt/link/b91f89f5-60ec-4fb4-b739-ec78dbc641e1/DEODEX_B370_V3.zip/
>
--------->root browser:
https://meocloud.pt/link/4b8303d5-1...r-com.jrummy.root.browserfree-223-v2.2.3.apk/

you wrote "custom theme" does it mean this rom supports cyanogenmod themes?

CUSTOM
dravida said:
you wrote "custom theme" does it mean this rom supports cyanogenmod themes?
Click to expand...
Click to collapse
Hi! I write custom because is changend by me., i edit the theme that is show in pictures.
If you go to build.prop and change this line:
ro.config.hwthemes=2 to 0
and reboot
I think my be it work, i dont have try it.

Step By Step How to Upgrade G6 - L11 to B370

>>>>>>>READ ALL TO THE END FIRST!<<<<<<
>
>>>>>>>>>>>If you ALL READY HAVE TRY IT AND FAIL, you can't flash B118 or B370 from dload folder, GO to this link:
http://forum.xda-developers.com/ascend-g6/general/g6-l11-b127-rom-how-to-upgrade-to-kit-t3079179
>
>
4.4.2 (B370) only can be upgraded from B118, its the base for B370 version, same oesmbl.
So, you need to install B118 first.
->Download B118
Official B118 ROM from Huawei Cambodia Server:
http://consumer.huawei.com/kh/support/products/downloads/detail/ascend-g6-4g-kh.htm?id=25971
Official B118 from Huawei French Server:
http://consumer.huawei.com/fr/support/downloads/detail/index.htm?id=24242
->->extract dload folder from B118
->paste in to external sd card the dload folder
->go to key pad and write this: *#*#2846579#*#*
-> Open ProjectMenu
->Upgrade
->SD card upgrade
Phone reboot and install B118
Now B370:
http://consumer.huawei.com/kh/support/products/downloads/detail/ascend-g6-4g-kh.htm?id=38361
->extract dload folder from B370.
->Delete dload from B118 from the external sd card and paste the dload folder from B370.
->go to key pad and write this: *#*#2846579#*#*
-> Open ProjectMenu
->Upgrade
->SD card upgrade
In the end will be miss same apps, themes dont work, etc... or you are a lucky man/woman and your custom.bin is the same than Cust folders!
TO FIX:
Need boot loader unlocked!
Request unlock code to Huawei by e-mail:
Hi!
My name is (your name) and I hereby request the bootloader code for my new smartphone HUAWEI ASCEND (your phone model) if possible.
Product SN: (In the backs)
IMEI: ( in key pad *#06# )
Product ID: ( in key pad *#*#1357946#*#*)
Thank you for your attention;
(your name)
This are the e-mails :
[email protected]; [email protected]
With luck only takes 1 day, bad luck from 1 week to 3 or more weeks...
---------> Or you can find it with DC-Unlocker
1. Download DC-Unlocker but only this version works, install it and reboot :
https://mega.nz/#!ykxjiRia!ppWG22acgv35N5j1VMTsZlKMi0i0JQB9v8BVn5l98WI
DC-unlocker-client-software-V1_00_1201
2. Turn ON debug mode
Go to Settings -> About phone -> Press several times Build number it will say "you are a developer now" -> go back and open Developer options ->Turn ON USB debugging -> DONE
3. Install ADB drivers with Hisuite ( best way ):
http://consumer.huawei.com/minisite/HiSuite_en/
The first time HiSuite try to connect with the phone, in the screen phone it will pop up a Windows requesting permissions for the connection with PC, MUST GIVE IT!
4. It need to enable USB Manufacturer Mode in phone:
In dial pad type code *#*#2846579#*#*
select "Project Menu"
"Background settings"
"USB ports settings"
"Manufacturer mode" (IF OPEN THE MENU TO CHOOSE THE USB CONNECTION PRESS RETURN TO GO BACK TO CONFIRME)
"CORFIRME"
And Reboot the phone,.
5. Connect Phone to usb (MY DEBUG MODE WAS ON AND USB FLASH DRIVE WAS SELECTED) and open DC UNLOCKER.
6. Select Huawei Phones in manufacturer and leave the model Auto detect
7. Click on the magnifing glass and wait for detection
8. You will see the bootloader code appears in the BOX bellow.
9. Use this software and the unlock bootloader option, 18 option:
https://mega.nz/#!S95yRYbY!vxh7daocU-_q4bXb4cu88b_UMqybJxt8Fh24z9mmcck
----------------------------------------
->With the code, download this:
ADB with Huawei_Bootloader_Unlocker, TWRP.img, RECOVERY.IMG and KingUser zip:
https://meocloud.pt/link/32ef02e9-4fd9-4963-ab33-622536ff34ff/ADB/
https://meocloud.pt/link/47a61397-d200-4862-bd99-1aa573fa8fe7/TWRP.img/
https://meocloud.pt/link/a630b21b-e2b4-4253-8ca3-f1a1aa3bd4cf/RECOVERY.img/
https://meocloud.pt/link/0d060247-9d19-471e-8848-4a9e5681cd1a/UPDATE-Kinguser-3.4.0.zip/
->ADB drivers are inside ADB_TOOLS, install them.
->Turn off the phone, press vol - and power, release power on boot, vol when you see fastboot screen.
->wait to PC install the phone.
http://s23.postimg.org/48y8249zv/Imagem1.jpg
->The first icon in Huawei_Bootloader_Unlocker is to check if device is connected, must expand the cmd window to see it, is the first window in the image from above, must have same thing like that.
-> copy the code to Huawei_Bootloader_Unlocker, easy to see where you are going to paste.
-> Phone reboot with out error msg if you have done correctly, if get error check the code.
->Copy Kinguser zip to External SD card
-> Turn off again
->Press vol - and power, release power on boot, vol when you see fastboot screen. Must say unlocked in the end of page.
->Now Open the folder inside ADB Tools, ADB_TOOLS, the cmd inside is from Windows 7 64 bit, if you have a diferent Windows, go to c:\windows\system32 and COPY to REPLACE the cmd in ADB_TOOLS
-> COPY TWRP.img in to ADB_TOOLS folder
->Execute cmd
->write this
fastboot flash recovery twrp.img
-> unplug usb, press vol+ and power, dont release, when boot release power, when you see TWRP screen release vol.
->go to install an look for kinguser zip, install it, phone reboot
->go to google play and look for root browser and install it.
->with root browser go to /data look for custom.bin, open like a text file, you will see same thing like ex: vodafone/pt , go to /cust now, inside cust change hw to the first name, in my case vodafone, open vodafone, inside change normal to second name, in my case pt, use small font!
>
---->Root Browser:
https://meocloud.pt/link/4b8303d5-1...r-com.jrummy.root.browserfree-223-v2.2.3.apk/
>
>
----->To recover the DTMF tone (in my case) go to /cust/vodafone/pt/xml look for hw_defaults.xml, open like a text file and find this line:
<integer settings.system.dtmf_tone="0" reset="true"/>
change to:
<integer settings.system.dtmf_tone="1" reset="true"/>
>
>
>
->Fix Bluetooh tethering:
This in my case, go to /cust/vodafone/pt/prop/local.prop
look for ro.config.hide_bt_tethering , now change from true to false.
-> turn off the phone
->copy the default recovery.img to ADB folder
->Press vol - and power, release power on boot, vol when you see fastboot screen.
->Execute cmd
->write this:
fastboot flash recovery recovery.img
fastboot reboot
-> To clean any bug do factory reset
--->End of story!!
DONE
>
>
------>>>>>>After install the ROM B370, fix cust, fix bluetooh tethering, etc,
YOU WANT A CLEAN ROM with NO root, etc, etc, you can do this:
>
->bootloader must be unlocked
->Paste default system.img in ADB folder
->Turn off the phone
->press vol - and power
-> Open ADB commands and write:
fastboot flash system system.img
-wait ot finish
->power off
->power on
->NOW YOU HAVE A DEFAULT ROM, NO ROOT, ETC, ETC.
-> If you have DEFAULT recovery do factory reset to wipe/fix data for default ROM
-> If you have TWRP, reboot in TWRP and do factory reset in there.
>
>
>
>
B370_default_SYSTEM_and_RECOVERY
https://meocloud.pt/link/1d7a17b2-90d8-41ba-aa5e-7e937f96180a/B370_default_SYSTEM_and_RECOVERY/
>
>
>>>>>>>>>>>If you FAIL in the beginning, you can't flash B118 or B370 from dload folder, GO to this link:
http://forum.xda-developers.com/ascend-g6/general/g6-l11-b127-rom-how-to-upgrade-to-kit-t3079179

persona78 said:
>>>>>>>READ ALL TO THE END FIRST!<<<<<<
>
>>>>>>>>>>>If you ALL READY HAVE TRY AND FAIL, you can't flash B118 or B370 from dload folder, GO to this link:
http://forum.xda-developers.com/ascend-g6/general/g6-l11-b127-rom-how-to-upgrade-to-kit-t3079179
>
>
4.4.2 (B370) only can be upgraded from B118, its the base for B370 version, same oesmbl.
So need to install B118 first.
->Download B118
Official B118 ROM from Huawei Cambodia Server:
http://consumer.huawei.com/kh/support/products/downloads/detail/ascend-g6-4g-kh.htm?id=25971
Official B118 from Huawei French Server:
http://consumer.huawei.com/fr/support/downloads/detail/index.htm?id=24242
->Extract to external sd card the dload folder
->go to key pad and write this: *#*#2846579#*#*
-> Open ProjectMenu
->Upgrade
->SD card upgrade
Phone reboot and install B118
Now B370:
http://consumer.huawei.com/kh/support/products/downloads/detail/ascend-g6-4g-kh.htm?id=38361
->Delete dload from B118 and extract to external sd card the dload folder from B370.
->go to key pad and write this: *#*#2846579#*#*
-> Open ProjectMenu
->Upgrade
->SD card upgrade
In the end will be miss same apps, themes dont work, etc... or you are a lucky man/woman and your custom.bin is the same than Cust folders!
TO FIX:
Need boot loader unlocked!
Request unlock code to Huawei by e-mail:
Hi!
My name is (your name) and I hereby request the bootloader code for my new smartphone HUAWEI ASCEND (your phone model) if possible.
Product SN: (In the backs)
IMEI: ( in key pad *#06# )
Product ID: ( in key pad *#*#1357946#*#*)
Thank you for your attention;
(your name)
This are the e-mails :
[email protected]; [email protected]
With luck only takes 1 day, bad luck from 1 week to 3 or more weeks...
->With the code, download this:
ADB with Huawei_Bootloader_Unlocker, TWRP.img, RECOVERY.IMG and KingUser zip:
https://meocloud.pt/link/32ef02e9-4fd9-4963-ab33-622536ff34ff/ADB/
https://meocloud.pt/link/47a61397-d200-4862-bd99-1aa573fa8fe7/TWRP.img/
https://meocloud.pt/link/a630b21b-e2b4-4253-8ca3-f1a1aa3bd4cf/RECOVERY.img/
https://meocloud.pt/link/0d060247-9d19-471e-8848-4a9e5681cd1a/UPDATE-Kinguser-3.4.0.zip/
->ADB drivers are inside ADB_TOOLS, install them.
->Turn off the phone, press vol - and power, release power on boot, vol when you see fastboot screen.
->wait to PC install the phone.
http://s23.postimg.org/48y8249zv/Imagem1.jpg
->The first icon in Huawei_Bootloader_Unlocker is to check if device is connected, must expand the cmd window to see it, is the first window in the image from above, must have same thing like that.
-> copy the code to Huawei_Bootloader_Unlocker, easy to see where you are going to paste.
-> Phone reboot with out error msg if you have done correctly, if get error check the code.
->Copy Kinguser zip to External SD card
-> Turn off again
->Press vol - and power, release power on boot, vol when you see fastboot screen. Must say unlocked in the end of page.
->Now Open the folder inside ADB Tools, ADB_TOOLS, the cmd inside is from Windows 7 64 bit, if you have a diferent Windows, go to c:\windows\system32 and COPY to REPLACE the cmd in ADB_TOOLS
-> COPY TWRP.img in to ADB_TOOLS folder
->Execute cmd
->write this
fastboot flash recovery twrp.img
-> unplug usb, press vol+ and power, dont release, when boot release power, when you see TWRP screen release vol.
->go to install an look for kinguser zip, install it, phone reboot
->go to google play and look for root browser and install it.
->with root browser go to /data look for custom.bin, open like a text file, you will see same thing like ex: vodafone/pt , go to /cust now, inside cust change hw to the first name, in my case vodafone, open vodafone, inside change normal to second name, in my case pt, use small font!
>
---->Root Browser:
https://meocloud.pt/link/4b8303d5-1...r-com.jrummy.root.browserfree-223-v2.2.3.apk/
>
>
----->To recover the DTMF tone (in my case) go to /cust/vodafone/pt/xml look for hw_defaults.xml, open like a text file and find this line:
<integer settings.system.dtmf_tone="0" reset="true"/>
change to:
<integer settings.system.dtmf_tone="1" reset="true"/>
>
>
>
->Fix Bluetooh tethering:
This in my case, go to /cust/vodafone/pt/prop/local.prop
look for ro.config.hide_bt_tethering , now change from true to false.
-> turn off the phone
->copy the default recovery.img to ADB folder
->Press vol - and power, release power on boot, vol when you see fastboot screen.
->Execute cmd
->write this:
fastboot flash recovery recovery.img
fastboot reboot
-> To clean any bug do factory reset
--->End of story!!
DONE
>
>
------>>>>>>After install the ROM B370, fix cust, fix bluetooh tethering, etc,
YOU WANT A CLEAN ROM with NO root, etc, etc, you can do this:
>
->bootloader must be unlocked
->Paste default system.img in ADB folder
->Turn off the phone
->press vol - and power
-> Open ADB commands and write:
fastboot flash system system.img
-wait ot finish
->power off
->power on
->NOW YOU HAVE A DEFAULT ROM, NO ROOT, ETC, ETC.
-> If you have DEFAULT recovery do factory reset to wipe/fix data for default ROM
-> If you have TWRP, reboot in TWRP and do factory reset in there.
>
>
>
>
B370_default_SYSTEM_and_RECOVERY
https://meocloud.pt/link/1d7a17b2-90d8-41ba-aa5e-7e937f96180a/B370_default_SYSTEM_and_RECOVERY/
>
>
>>>>>>>>>>>If you FAIL in the beginning, you can't flash B118 or B370 from dload folder, GO to this link:
http://forum.xda-developers.com/ascend-g6/general/g6-l11-b127-rom-how-to-upgrade-to-kit-t3079179
Click to expand...
Click to collapse
I followed instructions and flashed B370. Now my home button is not working

You have G6 L11?

persona78 said:
You have G6 L11?
Click to expand...
Click to collapse
G6-L33
"the same as L22 and L11"

Sorry, Its the same is true, but this is for Europe and files are diferent from Colombia, thats way the issue..
It does not work in L22 and L33 , although it is the same phone with the same kernel, but the provider configuration is totally different, frequencies , network codes, etc.
I did not know because no one yet with these models had reported , I found this incompatibility shortly ...
If someone able to change or create , it may be possible to upgrade .
L11 - Europe
L22 - Venezuela
L33 - Colombia
Sorry :\

works great . thanks a lot man

i updated to B370 successfuly, everything working fine except Motion Control. when i go to "Motion Control" in Settings, there is nothing there (a blank white screen).
I remember this problem was in P6 EMUI 3 too and a patch was there to fix it. any patches for G6?

Same thing goes rong. Sensors must work! Or pictures rotate?
If not, flash b118 again, than b370. Don't forget factory reset after change cust folders names.

:good:
Excellent guide, you did a summary of four different things in one and easy to understand. For your mastery of the subject I wanted to ask your help to use my Huawei G6-U00 with firmware of China, which has unlocked WCDMA 1900 MHz band, so I can not use the phone in 3G in Venezuela.
Is there a way to unlock it?
I have tried to Engineer Mode, but it asks a code that is not known Huawei (0, 0000, 1234), . Also I tried the QPST program, but despite being recognized as a modem, do not read as a telephone and does not communicate with the RF_NV_Item_Manager.
Thanks in advance!!
Mario

Hmmm, unlock bootloader, root it and do backup from your ROM. than try b136 u251 rom, from colombia. You can use g6sknife to do backup (need root).

oemsbl version list check error!
persona78 said:
Hmmm, unlock bootloader, root it and do backup from your ROM. than try b136 u251 rom, from colombia. You can use g6sknife to do backup (need root).
Click to expand...
Click to collapse
I have Bootloader unlocked, Rooted, and CWM as Recovery.
I installed G6-U251 B136 dload in SDcard, Note ( in my U00), and gave me the following errors; oemsbl version list check error!, ?V write data error, Error; Update.app is an invalid package, Sd card update failure, SD card update abort.
I used the default recovery cause the CWM asks a zip file. and I unzipped the file and place it in the folder Dload in SDcard.
Any advice?

marioarnaldo1965 said:
I have Bootloader unlocked, Rooted, and CWM as Recovery.
I installed G6-U251 B136 dload in SDcard, Note ( in my U00), and gave me the following errors; oemsbl version list check error!, ?V write data error, Error; Update.app is an invalid package, Sd card update failure, SD card update abort.
I used the default recovery cause the CWM asks a zip file. and I unzipped the file and place it in the folder Dload in SDcard.
Any advice?
Click to expand...
Click to collapse
Oesmble...
Only if same one extract u251 images from phone and create a flash zip.
Try in huawei g6 development, in Facebook.
Sent using XDA One

Oesmble problem
persona78 said:
Oesmble...
Only if same one extract u251 images from phone and create a flash zip.
Try in huawei g6 development, in Facebook.
Sent using XDA One
Click to expand...
Click to collapse
I belong to this group in Face.. And there isn´t answer yet!!. Which Tool should i use to debrand the u251.? i don´t know if is it possible to flash the radio part of the rom in my default ROM!!... What do you think?
thanks in advance!!

marioarnaldo1965 said:
I belong to this group in Face.. And there isn´t answer yet!!. Which Tool should i use to debrand the u251.? i don´t know if is it possible to flash the radio part of the rom in my default ROM!!... What do you think?
thanks in advance!!
Click to expand...
Click to collapse
After you do backup with g6sknife, there is a tool you can use, is the rom extractor, is in g6skinfe to.
Extract system, cust modems.
Copy system to cmd folder, boot in fastboot (bootloader), use cmd option, than flash system if fail you need to restore your backup, because you stay with out system, if you get success, put cust and modems in backup zip and use cwm to flash it. If you get success to, you need to change cust to your provider.
Sent using XDA One

G6_L11 problem after update...
Hello...
I have a G6-L11, Digitel Venezuela ...
Since I did ROM upgrade, the gyroscope and proximity sensors do not work, either lighting and ...
What can I do..??

problem with g6 rom
hi
i hope someone can help me with a little problem on my Huawei G6 smartphone.
the model is a G6-U10
but currently i have a U00 rom installed (B370, downloaded from the official Huawei site, probably the Chinese one)
installation of this rom went smooth, but this build has some serious shortcomings, so i wanted to install another rom. but that appears to be impossible!
I tried several U10, C00 and L11 roms, ranging from build B118, B193, B261,B330 and B370. most download from the official Huawei servers. and I also tried rollbacks, (U10 B360 to B136 and L11 B370 to B118), but nothing seems to work.
mostly i get the message "version list error" with some other things.
it's weird that i managed to install a U00 rom on a U10 device, but now it seems that i can't install anything from other models than U00 ánd roms that are older than the current one (B370), which is the problem, because this is the newest i think... so i can't find any other rom that i can install...
the phone is not rooted. i tried is with Vroot and Rood Genius, but it didn't work. why, i don't know. i don't even know what i precisely would do when the phone is rooted... but that's another story
I really want to install a proper working (preferably EU) rom on my G6, and at this point it doesnt matter to me how old the build is...
problem with the current rom U00 B370 is mostly this:
i can't add my Google account for the phones' contacts
play store can't install any apps
can anyone help me? cant i rollback to a better build or something?

freduce said:
hi
i hope someone can help me with a little problem on my Huawei G6 smartphone.
the model is a G6-U10
but currently i have a U00 rom installed (B370, downloaded from the official Huawei site, probably the Chinese one)
installation of this rom went smooth, but this build has some serious shortcomings, so i wanted to install another rom. but that appears to be impossible!
I tried several U10, C00 and L11 roms, ranging from build B118, B193, B261,B330 and B370. most download from the official Huawei servers. and I also tried rollbacks, (U10 B360 to B136 and L11 B370 to B118), but nothing seems to work.
mostly i get the message "version list error" with some other things.
it's weird that i managed to install a U00 rom on a U10 device, but now it seems that i can't install anything from other models than U00 ánd roms that are older than the current one (B370), which is the problem, because this is the newest i think... so i can't find any other rom that i can install...
the phone is not rooted. i tried is with Vroot and Rood Genius, but it didn't work. why, i don't know. i don't even know what i precisely would do when the phone is rooted... but that's another story
I really want to install a proper working (preferably EU) rom on my G6, and at this point it doesnt matter to me how old the build is...
problem with the current rom U00 B370 is mostly this:
i can't add my Google account for the phones' contacts
play store can't install any apps
can anyone help me? cant i rollback to a better build or something?
Click to expand...
Click to collapse
First, if you have a U10 why you flash a U00 ROM? ...
Google G6 U10 b146, try to install it.
Tell if you made it?

G6 ROMS
There are a lot of steps to do.. Open Bootloader, Root the Phone, Install Custom Bootloader, Flash a new Rom for G6-U10.
All these Steps are full Explained in GG Development Group in Facebook.
Send a request join message, and in Pinned Post. Read , read and read. There are a lot of information and a ROM that fit your ROM. What does it mean UE in your Question? United States? Union Europa´s? the ROMS are quite different.

.....
some of these links have been 'removed'

please
can you like please fix the link
:good:

How to install u10 update in u251 version?

I'm new user in this forum.
I have the g6-u251 version, and My question is that i don't know how install the u10 B330 version update. Please help me!
POR FAVOR AYUDEN
ANDROID 4.4 EMUI 3 IN ASCEND G6 U251?

I dont now if works..., and this is B360!
dvf1278 said:
I'm new user in this forum.
I have the g6-u251 version, and My question is that i don't know how install the u10 B330 version update. Please help me!
POR FAVOR AYUDEN
ANDROID 4.4 EMUI 3 IN ASCEND G6 U251?
Click to expand...
Click to collapse
ROM B360 AVAILABLE for G6-U10.
-----
- Download official B136 Rom from austrian Huawei site
http://download-c.huawei.com/downlo...343&version=54000&siteCode=at&hc_location=ufi
- Extract the dload folder to PC and copy to SD card.
- Go to Options→System Info→Update System→Local Update
---- Phone will reboot in recovery mode and install the update. At the end you'll have Emui 2.0 JellyBean Rom B136 as your system
------------ If you previously flashed a custom recovery (i.e. CWM or TWRP) deleting the stock one, you'll get an error similar to "E:Invalid command argument". You have two solutions:
---------------- 1)Turn off the phone, press Volume DOWN+Volume UP+Power buttons, release power on boot, vols when start to flash it.
---------------- 2)Download this, is the original recovery image, https://docs.google.com/file/d/0B0xf81pxOQgxTVpxU3RaTWNyRWc/edit and flash it by fastboot with ADB,
fastboot flash recovery recovery.img
- Now reboot the phone and it should notifies of an available update to KitKat, rom B360. Simply accept the update.
- If update doesn't get proposed, download this file:
update.zip - https://drive.google.com/file/d/0B0xf81pxOQgxcWs1QVlLNllPVlE/view?usp=sharing&hc_location=ufi&pli=1
- Put the archive update.zip into "HwOUC" folder inside the sd-card, if dont have it you can created
- Go to Options→System Info→Update System→Local Update
---- Your system will be updated to Emui 3.0 KitKat Rom B360.
------If not, turn off the phone, press vol UP and power, clean cache and go to update by zip, look for the file update.zip
------Done
If you have missing apps in the end, to fix you need bootloader unlocked:
!!!!!!»»»»»»»»»»»How to Unlock your bootloader««««««««««««!!!!!
1º Request code to Huawei by e-mail
Ex:
" Hi!
My name is (your name) and I hereby request the bootloader code for my new smartphone HUAWEI ASCEND (your phone model) if possible.
Product SN: (In the backs)
IMEI: ( in key pad *#06# )
Product ID: ( in key pad *#*#1357946#*#*)
Thank you for your attention;
(your name) "
->This are the e-mails (Use the PC, is better) :
[email protected]; [email protected]
PS: When copy paste to send it, please change what is inside of ( ), there are how send it like it is!!!!! Belive me, you never, never,never gona recive anything if goes like this!!!!
When you get the code!
You need ADB!
This one have already a software to unlock the phone
( Huawei_Bootloader_Unlocker ). and , than press "Desbloquear":
https://meocloud.pt/link/32ef02e9-4fd9-4963-ab33-622536ff34ff/ADB/
Only need to extract ADB folder from zip to desktop
--------------------------------------------------------------------------------
-with phone ON, turn on debug mode, open ADB_TOOLS folder and execute Boot_in_fastboot_mode.exe
»»»» OR
->Turn off the phone
->press vol - and power, release power on boot, release vol when you see the fastboot screen
--------------------------------------------------------------------------------
->plug the usb, let pc install the phone
->see if pc find the phone, execute See_if_phone_is_recognized.exe
-> must say samething like - 584566515 fastboot
-> if not, you must install the drivers for the phone or change the usb door.
->execute Huawei_Bootloader_Unlocker from the folder ADB TOOLS
->insert the code where says "Unlock code"!
->click in "desbloquear!"
->phone reboot and do a factory reset.
->Done
Now you need CWM recovery and kinguser.zip to root, Download this files:
-CWM-U10.zip:https://mega.co.nz/#!XpYxGC6D!K0dE4-sr7LmauOrVTRwlE5Qx8eX-mKfqNkTXteUkrTU
-UPDATE-Kinguser-3.4.0:https://mega.co.nz/#!bhp2AZyL!6R1zHtVrWC08tkHAcxv5XtwfjZjx_VbjV3qH2ezELuo
1. Unlock bootloader: https://www.facebook.com/groups/huawei.g6.development/permalink/457458214413436/
2. Download adb if you dont have it, from the link above:
3. extrad ADB TOOLS from zip to desktop, open it and open ADB_TOOLS
4. In PC go to c:\Windows\System32 look for cmd, COPY and paste in ADB_TOOLS.
5. Press volume down and power button to go in fastboot mode, and plug the phone in to PC.
6. Open cmd (doble click in cmd)
7. Type this:
Fastboot flash recovery CWM.img
fastboot reboot
8. Copy "UPDATE-Kinguser-3.4.0.zip" to your SD CARD
9. Turn OFF the phone, press vol + and power, release power on boot to go to recovery mode CWM
10. clear cache
11. Press install zip from sd card
12. Click update UPDATE-Kinguser-3.4.0.zip
13. wait for confirmation and after that when it complete REBOOT your phone
14. After rebooting go to Google play and install any root checker to see if is OK.
Now fix Cust:
The Roms are created for a specific provider , with a specific configuration. A ROM can be compatible with various models , such as U10 with the U251 , L11 with P7mini or even between the same zone countries .
But in the end we find small problems , such as lack of Shortcut Bar in version 4.3 and lack of applications in version 4.4 ! It has to do with the configuration of the CUST folder. How to fix ? We need access ROOT and an explorer as the Root Browser , which can be found in Google Play.
With Root Browser, in this case, we will go to folder /DATA and seek the custom.bin file, open it as a text file, you will see something such as vodafone/pt, for example, now we left the folder /DATA and go to the folder /CUST , we open it and we will usually find a folder with the name hw, we will change the name of it to the first name that we saw in custom.bin in our example will is vodafone, use small font, now we entered the vodafone folder and we will find another folder that usually his name is normal, let's switch to the second name of our exemple which will be pt, use small font!
Now just leave the Root Browser , turn off your phone , enter the recovery , perform a factory reset and start the phone normally.All will be fixed.
Tell if works!

like write data
[Hi, I have the g6 u251 but when i try to install it, says something like write data error update.app is a invalid package, how do i fix it?

for G6-L11 LTE - modded B370 ( apps to sd card, can flash several recoverys )

29-03-2016
For Huawei Ascend G6 L11 LTE
Hi!
This is the ROM i have in my phone, it was changed by me and for now everything is working fine.
If you want default tutorial go here :
>>>DEFAULT TUTORIAL:
https://www.facebook.com/Huawei.Ascend.G6.L11.Kit.kat.B370/posts/1427876034188089.
My version still Kit kat B370 but edited by me, is a backup from my phone.
Please read all to understand and see what you need to do and how to do it.
This Version is diferent because if you have a ext4 partition in your external sd card it will install the apps there automatically!!!
Advantage of this? you will have a huge store space for the apps!!!
If not it will work like default ROM.
To create a primary ext4 partition in sd card with the size you want, you can use mini partition tool (for windows OS ).
http://www.partitionwizard.com/free-partition-manager.html
You can create the partition after flash but you CAN´T activate your Google account or install anything else, before your reboot the phone with the partition inside sd card.
Now, if you are using it default than you create the partition and reboot, the phone don´t delete the apps but will shutdown that apps creating errors...
To use it with sd card ext4 partition is better to start from factory reset with the partition already created in sd card!
This video shows how this ROM works with a external ext4 partition in sd card what means that all apps go to sd card and let internal storage free:
https://youtu.be/7st6838_aAg
It have Rashr from XDA, it is a app that easly can change/flash your recovery and some other things.
When you flash this ROM it will create in your sd card a folder called recoverys, inside you will find TWRP ( modde by me to ) and the default recovery.
How to use it? Open Rashr, give root permissions, selecte recovery, search in explorer for sdcard1, open recoverys folder choose the one you want and flash it! Is that simple.
>>>>>This Rom have:
-Rashr from XDA, its a flash tool to use in phone
-Custom bootanimation and shutdown animation
- One Hand UI ( helps to write in keyboard with one hand, you can find in shortcuts bar )
- Root
- Root tools (Root Browser, ES File Explorer, build.prop editor, etc...)
-Same cosmetic changes ( battery icon, signal reciver and wifi icons edited)
-Swap
- Governor set to performance
-Low cpu frequencie set to minimum ( 300000 )
- RAM tweaks
- Entropy tweaked ( https://en.wikipedia.org/wiki/Entropy_(computing) )
-Google Play updated
-Huawei backup app update
-Huawei File manager Update
-Only basic Google apps
-The Icons order was changed
-P8 Theme manager
- More options in Storage folder
- The sdext4 shortcut is to your external ext4 partition IF you have it in sd card, if not, is a regular folder.
And same other things...
I hope you enjoy it.
ADVISE!
Always do backup from the ROM you have in your device.
If you have root you can use this tool, it have a backup option.
G6Sknife for windows OS
https://mega.nz/#!WgoVWLjQ
Key:
!YV1JLOGvXX4rvYreDXP1Twwh-V5O65NjmMxBH_7unUI
My device is working properly without any problem so far, some times bugs only be noticed with use and i will update this post with the ROM fixed.
Install it by your own free will, I am not responsible for any damage that may appear in the device.
This is a European ROM but, like the default one, there are same country restrictions in providers that may affect the 4G reception, etc, etc.
If you want to install, you can try to unlock these restrictions since the ROM has root.
>>>>> FIX CUST, CHANGE PROVIDER AFTER INSTALL THE ROM<<<<
This ROM was edited to vodafone pt but can be changed to your provider.
When you flash it, if you are not from Portuguese Vodafone it will show a bootanimation that say " Change Cust after settings than do a factory reset ".
This is how to fix it with Root Browser, that you can find in ROM, go to folder /DATA and seek the custom.bin file, open it as a text file, you will see something such as example zt/rt, now we left the folder /DATA and go to the folder /CUST , we open it and we will find a folder with the name vodafone, we will change the name of it to the first name that we saw in custom.bin in our example will is zt, use small font, now we entered the zt folder and we will find another folder that his name is pt, let's switch to the second name of our exemple which will be rt, use small font!
Go back and exit the app, do a factory reset. Done!
.
.
>>>HOW TO INSTALL ROM.
Do backup from your data/apps with the default backup app from the phone to restore after install it.
->You need bootloader unlocked, search in this page to how to do it ( http://forum.xda-developers.com/ascend-g6/general/huawei-ascend-g4-4g-l-11-instant-t3190617/page2 ) , and need TWRP recovery FROM THIS POST, to install TWRP boot in bootloader ( fastboot - turn off the phone, press vol - and power, release power on boot than vol when you see the fastboot screen, must say in red unlocked) and execute this file to install TWRP recovery:
TWRP2d.exe
https://mega.nz/#!T9pygRAC
KEY:
!qVujE5A7RrQeQ1dqFFuRGYtUvBLWo-PfrEAGr6QoGsI
To install ROM, copy the zip file bellow ( ROM ) to sd card, turn off the phone, press vol + and power at same time, release the power on boot than vol + when you see the blue screen from TWRP, go to install and search for the zip, than swipe to install! Done. The ROM will install the default recovery again, if you want to stay with TWRP you must flash it again.
----->Before ROM flash, IF YOU WANT to win 2205MB more for apps and user data flash this zip file with TWRP like it was a ROM, you can read the steps in the end of flash, but i will write bellow. For you understand when you see "Insufficient storage available" is not the storage where music or pictures go, that is like a sdcard, is data partition storage. What this zip do? This will take from that storage where music and pictures go to give to data partition storage. Why this is good? Every one have a external sd card for pictures and music, i think and this will let to to install more apps in phone!!!
ADVISE: This do a factory reset!!
https://mega.nz/#!OgRzmDiK
KEY:
!zPrLPGzJPQOM1eTxX_L3SX1qiUyCs7ewkx-Fz77yM3U
->After zip Flash DON´T GO OUT FROM TWRP!
Go to main menu -> WIPE ->Advanced Wipe ->Select data -> go to repair or change file system -> change file system ->EXT4 Swipe to Change -> Now you can reboot.
.
-> My ROM have a swap ON ( https://en.wikipedia.org/wiki/Paging#SWAP-SPACE ).
Before flash see this video it shows a basic Flash with out changing the partitions size and with out a external ext4 partition and don´t show to how to change cust because it is already set to my provider.
It shows the flash from B118 than to Huawei_Ascend_B370_LTE_BB ROM:
https://youtu.be/duF3kWSpgsI
|
|
|
V
Now the ROM!
29-03-2016!
Huawei_Ascend_B370_LTE_BB.zip
https://mega.nz/#!ys4D3TYa
KEY:
!7PmY_vzI-i7a2P4wR6f5g15capGSZxFqIvFgri30aPA
Note:
This "MAYBE" works in same L22, L33 but not dual SIM. Only testing you can know it. The Only issue for sure that will be is the home key but can be fix it with a simple app from google play.
You can try to use this app with this ROM, for now, if you want it.
Notes:
Tap Tap App is to use light sensor to unlock the phone, open Tap Tap app, Install, go to setup sensor, select "Unlock when removing the cover", unselect "Tap Tap unlocks the screen" ( G6 don´t have this option in kernel).
Busybox, is a tool to install several Linux tools to use with Android, like cmd in Windows... if i can say like this... You can use them with terminal emulator.
GPS Status helps with GPS, it gets faster, better if data is ON.
>>>Multi-action Home Button<<<
https://play.google.com/store/apps/details?id=com.home.button.bottom
https://youtu.be/gv2bEPloL6Y

flash error ( Failed )
Hi...
How are you..??
I have flash error...
Checking device...
This package is for device: msm8226; tis device is hwG6-L11...
What i can do it..??

Bricked my device. Flashed it successfully via TWRP and after the automatic reboot, nothing came back on not even the screen

Huawei Mediapad t3 7

Hello folks,
Bought a Mediapad T3 7 from Walmart recently. Has anyone found root yet? I tried all of the Kingroot, etc. APK's so far. Don't waste your time. Tried them all.
If our magicians here can find root, I'd love it!
Thanks,
Rich

Got the same request. Tried KingRoot and iRoot, cause you never know
I'd imagine it's coming one day or another. Tablet isn't that old yet.

Just a matter of somebody compiling twrp for it, I'd imagine..

I would love to know if any progress has been made. I need TWRP and an AOSP ROM. I love the devices look and feel, and its bluetooth operability. but absolutely DESPISE the UI and how it operates.

+1. Decent little tab but no built-in ext4 format for external SD, hoping for root. Getting it to run on stock android would be neat, too.

I tried the online root solutions-none of them work. Just tried Kingroot today and no good.

Same here I got a new huawei t3 10" great tablet by the way but no way I can root it.. I've tried all the Internet suggested ways and nothing seem to work at all but I manage to get the Device ID typing a code in the dialer.

Mercer99 said:
Same here I got a new huawei t3 10" great tablet by the way but no way I can root it.. I've tried all the Internet suggested ways and nothing seem to work at all but I manage to get the Device ID typing a code in the dialer.
Click to expand...
Click to collapse
hi, are you able to make calls on your T3 10? If yes, can you let me know your firmware details, thanks

buddimanv said:
hi, are you able to make calls on your T3 10? If yes, can you let me know your firmware details, thanks
Click to expand...
Click to collapse
Hi there, about that yes I can make phone calls with it I bought the Model with the 4G option (there is 3 models from the same Huawei tablet one of them is WiFi only and the other two can make phone calls) also I managed to unlocked the bootloader by using the device ID I got earlier and Huawei website.
mine is AGS-L09 model

Thanks Mercer99, appreciate it (for your device security, can you remove the image as this has your IMEI)- we have the same model, but different firmware.
AGS-L09C199B002 is “Saudi Arabia Oman Kenya Cameroon Jordan Qatar Ghana Android 7.0 EMUI 5.1” region.
AGS-L09C127B031 is “Greece Hungary United Kingdom Nonspecific Android 7.0_EMUI” . The dialer/calling function is disabled on this firmware - confirmed on Vodafone and EE network.
Is there any way you can extract the OEMINFO from your device and share it with us. This should enable me to debrand the phone if I can find your firmware (downloaded EUROPEAN version with Firmware finder already – so really need an European OEMINFO).
My phone is still locked to Vodafone so I am not sure whether I can flash the firmware or even need root to flash a different OEMINFO (bootloader is unlocked already).

Sorry buddimanv I would love to help but I don't know how

OEMinfo
Last time I did was with P9 Lite - changing from EE to European firmware using a tool (I think SRK Tool or “VNS-L21/22/23/31 [EU] Toolkit [0.0.0.12] All-in-One”) but it was rooted - seems like root is needed before anything. I think the process would be to change the firmware on tablet as well.....
I was hoping as bootloader is unlocked, we can retrieve OEMINFO from fastboot or something and debrand….would be good if anyone can clarify.

Possible Root Solution
Anyone prepared to test rooting method below?
How to install Magisk with ADB
How to install Magisk with ADB
Does not require the availability of custom recovery and root-access
1. Delete all other types of root-access and restore the partition image of the boot partition
2. Download Magisk v13.6 or later and download / unzip from the firmware partition image of the boot partition
3. Unpack the Magisk archive, put the boot image of the boot partition in the same folder, and rename it to boot.img
4. Rename the folder with the name corresponding to the architecture of your device (arm, arm64, chromeos, x64, x86), in magisk_inject
5. In the terminal, change the current directory to the folder with Magisk and run the following commands one at a time:
PHP:
adb shell "rm -rf / data / local / tmp / *"
adb push META-INF / com / google / android / update-binary common magisk_inject boot.img / data / local / tmp
adb shell "cd / data / local / tmp / magisk_inject; mv ../common/*.; chmod 755 *; sh ../update-binary indep boot_patch.sh ../boot.img; mv ../bin/ busybox busybox "
adb pull /data/local/tmp/magisk_inject/new-boot.img
adb shell "cd / data / local / tmp; rm -rf * .img magisk_inject / *. img update-binary bin common"
6. To flash the resulting boot partition image with the name new-boot.img
PHP:
fastboot flash boot new-boot.img
7. Download the system and make sure that Magisk Manager is installed and that its version corresponds to the version of Magisk. If not, manually install the correct version of Magisk Manager.
Click to expand...
Click to collapse
or follow original post
Via Magisk Manager (Only support v14.0+):
This method does not need root, and also does not require a custom recovery.
However, you MUST have a stock boot image dump beforehand, and also be able to flash the patched boot image, either through fastboot/download mode or ODIN
Install the latest Magisk Manager
If you're planning to flash the patched boot image through ODIN, go to Settings > Update Settings > Patched Boot Output Format, and select .img.tar. For normal users leave it as the default .img
Press Install > Install > Patch Boot Image File, and select your stock boot image file
Magisk Manager will now patch your boot image, and store it in [Internal Storage]/MagiskManager/patched_boot.img[.tar]
Flash the patched boot image to your device and reboot. Voilà!
Check whether Magisk Manager is installed and the version matches the latest one in the OP
If for some reason Magisk Manager isn't installed/upgraded automatically, please install it manually
Click to expand...
Click to collapse
Bootloader can be unlocked easily of course (code is given immediately) - here
I am tempted but trying to control myself as I don't have a copy of my existing firmware to revert back via dload method if something goes wrong. However, AGS-L09C199B003 firmware is available, so if it fails, I believe you can always go back to stock. I have a feeling this will work.

Took a risk and its rooted now - Magisk v14.0 installed fine and seems to be working (need to test further). Also, Vodafone unlocked the device now for me
Challenge now is to debrand so as to enable functions which has been disabled by Vodafone (namely calling).
Would appreciate if anyone can help - need OEMINFO from another region so as to change the firmware, especially European one or even other UK network who does not disable calling.

Could not contain myself…. In my quest to debrand so I can have a dialer/phone calling function, downloaded a firmware (either from FF Team or on the internet), tried flashing system.img file to see if it installs the dialer as it would not install extracted ones and it did not work. So tested with the boot.img and it did work but phone kept rebooting to eRecovery.
Restoring from TWRP (incomplete/untested) backup did not work. Can’t install any other regional firmware because of OEMINFO. eRecovery can’t find any firmware. The only thing – TWRP/Stock Recovery, eRecovery or bootloader!
Chatted with Huawei support and they won’t give me a link to download the firmware – want me to send for repair, which I don’t really want to – too much hassle and they may end up blaming me anyway….lol He agreed to upload one to their website if he can find one.
I would appreciate if anyone can give me an OEMINFO or link to EUROPEAN firmware with a dialer….. I think European one is AGS-L09C127B031CUSTC127D002 – would appreciate if anyone can share the file with me.

Mercer99 said:
Hi there, about that yes I can make phone calls with it I bought the Model with the 4G option (there is 3 models from the same Huawei tablet one of them is WiFi only and the other two can make phone calls) also I managed to unlocked the bootloader by using the device ID I got earlier and Huawei website.
mine is AGS-L09 model
Click to expand...
Click to collapse
More details and links for the bootloader please, I really need a tutorial-thanks.

dorpmuller said:
More details and links for the bootloader please, I really need a tutorial-thanks.
Click to expand...
Click to collapse
What a buncha bull**** the huawei site is. I got there and when I go to type the product id# in it brings up a calculator dialog with digits I don't even have on the calc.
Done with huawei. All night effing with this is enough. Won't deal with bizarre companies. I'll stick with my samsungs.
I tried... thanks for all of your responses.
Rich

dorpmuller said:
What a buncha bull**** the huawei site is. I got there and when I go to type the product id# in it brings up a calculator dialog with digits I don't even have on the calc.
Done with huawei. All night effing with this is enough. Won't deal with bizarre companies. I'll stick with my samsungs.
I tried... thanks for all of your responses.
Rich
Click to expand...
Click to collapse
I got stuck on the calculator part too. I didn't see the parenthesis buttons. But I turn the tablet on its sit. the view turned horizontal and i was able to see more buttons available. Horrible design for the calculator app.

Hi guys, can someone finally root this Tablet? I would also like to install TWRP to install an AOSP ROM.
Thank you!

Hi.
Did anyone succeed unlock Mediapad T3 7 bootloader ?
I have model BG2-W09 wifi only (European version). I have problem get product id
which is necessary part for bootloader unlock on Huawei site. Stucked to the calculator thing,
when i'll enter ()()1357946()()= on the calculator - i will get ERROR.
Contacted with the Huawei customer service for the help and got not nice answer:
We are unable to send boot loader code via email and can only be obtained through our website.
If you would want to unlock your phone, you should meet the following conditions:
1.Please register your Huawei ID in our official website on your phone.
2.Log in and logout your Huawei ID continuously for 14 days.
3.Each Huawei ID should not apply for the unlock code more than fifth time within 6 months.
Early people informed that email support works fast, but seems now the Huawei tightened terms.
Now i can expect 2 weeks everyday login to meet the requirements.
Some comments about tablet, maybe following helps someone.
One strange thing i've noticed with the tablet, it's not so easy bring up fastboot / recovery menu.
Pressing volume down + power brings up Chinese language test menu (8 options), nowhere to go with that,
pressing volume up + power brings up dialog with 3 options, "Reboot system now" or "Wipe data / factory reset" or "Wipe cache partition". Pressing by same all 3 buttons, volume up + volume down + power brings
up message that update not succeeded, update file not found on sd card. Also if you press only volume down and connect micro usb cable, it brings you to the Chinese test menu again. Also weird why European version tablet has at all Chinese test menu ?
I have triple boot desktop computer and i've downloaded 3 latest adb and fastboot platform-tools packages, for windows (using 10), mac and linux. With windows, using cmd i can start adb session, query device,
seems like everything works, when i'll try:
"adb reboot bootloader", device just reboots back to the main. Tried the same with the Ubuntu, same thing, adb helps finds the device, but when trying: "adb reboot bootloader" device just reboots into normal, not going into fastboot/rescue mode.
The thing is different with the mac (OSX 10.12), when i'll type to the terminal:
"adb reboot bootloader" the device rebooting into the fastboot mode.... and the terminal not responding any further, example when quering: "fastboot devices",
but having already fastboot mode activated on tablet and when rebooting desktop into windows 10 or ubuntu, i'm able using fastboot, tablet responds to the: "fastboot devices" or "fastboot oem get-bootinfo", even "fastboot oem unlock" responds informing about not valid key...
So far i'm able to put tablet into fastboot mode only using mac. Hope that's useful info for someone struggling
with same problems.
Unfortunately bootloader is still locked, problem finding product id, Huawei also did not help.
Huawei product id generator did not recognise Mediapad T3 versions.
Any ideas how to find product id or maybe someone can share the unlock code ?
Thanks in advance.