Related
[Newbie] Complete Guide to for Rooting & Install a Custom Rom [Updated 9 Sep 2013]
This is aimed at new "rooters". The process is incredibly easy.
I also take no responsibility if you mess up somehow, and this is for GSM Hero's NOT Sprint Hero CDMA users.
Original Thread
http://forum.xda-developers.com/showthread.php?t=645253
I have now also included a link to z4root as an alternative.
Here is a link to my backup guide but please be aware that most of it requires root access.
Prelude:
Install HTC Sync from here
Download Universal Androot
Download z4root
Download Root Checker - only if you need to
Download AmonRA Recovery v1.7.0.1.img - easier if you rename this "recovery.img" when it is on your sdcard
Place both downloaded files on your SD Card
Root & Recovery
1. Download and install Astro File Manager from the Market (or use any other file management program of your choice)
2. Open Astro and find and install Universal Androot (or if that doesn't work try z4root) from your sdcard:
Select UniversalAndroot.apk > Open App Manager > Install > Settings> [tick] Unknown Sources > OK > Back > Select UniversalAndroot.apk > Open App Manager > Install > Install > Open
3. In the app and choose the correct version from the dropdown box:
Superuser for Android 2.0~2.2 - if you have updated your phone recently
Superuser for Android 1.5~1.6 - if you have refused updates recently or your country/provider hasn't released one yet
Then choose: "Root "
Wait until it says "Woot ! Your device is rooted !" and exit the program.
4. Download and install Android Terminal Emulator from the Market (use Better Terminal instead if this one doesn't work)
5. Run "Terminal Emulator". Type (press and hold menu to get the keyboard up) in the following:
su (press enter and wait for the "Super User Request Prompt". Choose "Allow" and make sure its ticked to Allow every time.)
flash_image recovery /sdcard/recovery.img (press enter - make sure this is typed exactly as seen)
N.B. If you have issues here, see * notes below for more assistance
6. Turn off your phone and press Home + Power to start it up again. This should boot into recovery mode.
Install Your Custom Rom
Note: This part of the guide can be repeated with as many different rom's as you like. You do not have to repeat the previous section once you have a recovery image installed.
1. Download a Custom ROM from here to your computer.
2. Make sure your phone is in recovery mode (Home + Power)
Plug your phone into your computer and select "USB-MS toggle" in recovery
Place the Custom ROM on your SD card in the main directory and press Home when it has finished copying over
3. Select Backup/Restore > Nand backup > confirm with Home > Wait
(or Nand + Ext if you have A2SD setup)
4. Press back then select Wipe from the main menu, then select:
Wipe data/factory reset > Home
Wipe cache > Home
Wipe Dalvik-cache > Home
Wipe SD:ext partition > Home
Press back button
Select Flash Zip from SD Card
Select the file
Press Home to confirm
Note: Ignore any "errors", they are normal and usually mean you're not using that feature.
5. Once it is done, select Reboot and you will boot into the new Custom ROM.
Updating your Radio
Note: The radio deals with your signal levels and connectivity.
1. Download the latest radio from the following page
N.B. Radio's are not region specific! Just get the latest
2. Mount your SD Card so your computer can read it and place the downloaded file in the main directory
3. Turn off your phone and boot into the recovery screen (holding Home + Power)
4. Choose:
Flash Zip from SD Card
Pick the radio.zip file and press Home to confirm
Wait
Your phone will reboot a couple of times but when you're back on the Recovery Screen just press reboot system now and it will complete the install and put you back into your custom rom.
DO NOT PULL THE BATTERY OUT, THIS WILL BRICK YOUR HANDSET.
5. When this process has completed reboot the phone and you should have the new radio. This can be checked in Settings > About Phone
Original Thread
http://forum.xda-developers.com/showthread.php?t=645253
Thanks
This is not a guide for the HTC ONE S, new users please disregard this and use one of the guides from our forum.
Yea I was wondering why this was here, you got lost man
Huawei Ascend G6 - L11 How to Update to Kit Kat when the normal update does not work and gives error. (as happened to me from Rom B127 to B370 )
>>>>>>>>>>>> ALLWAYS HAVE A BACKUP AND A BACKUP FROM YOUR DEFAULT ROM!!!<<<<<<<<<<<<<<<<<<
----I am not responsible for any damage to your device. Everything here indicates was tested on my phone finding the same in perfect condition.----
>
I already flashed more than one time, in tests , doing the versions , etc. , and all ways work .
But, as in the other version , there are who may have difficultys ...
>
>
>>>B370_V3<<<
>
-->First need the unlocked bootloader :
Send the following e -mail to - [email protected] and [email protected]
Hi! My name is ( your name ), and I hereby request the bootloader code for my smartphone HUAWEI ASCEND G6 - (your default version) if possible .
Product SN : (It is on the back of the equipment )
IMEI : (on key pad *#06# )
Product ID : ( the key pad *#*#1357946#*#* )
Thank you for your attention
( Your name)
>
>
ABD Terminal - https://meocloud.pt/link/e2bcfbb5-1971-476d-b26c-1e5f8037e92f/ADB Terminal.zip/
>
TWRP. recovery - is in the ADB folder from above
>
copy the ROM to external SD Card. (see what is write in /data/custom.bin, open like a text file and choose the ROM with the same ref.)
if there is no ROM with your defenitions you can fix in the end of flash, choose B370_V3 and change vodafone to the first name you find in custom.bin, enter the folder and change the second folder name with the second name you find in custom.bin, exemple my was vodafone/pt, so my first folder is vodafone and the inside, the second folder, is pt. Always small fonts and do a factory reset.
>
> Turn OFF the phone
>press vol - and power (fastboot mode)
>extract ADB descktop and open it in cmd ( the cmd inside ADB is from windows 7 64BIT, if you use other version, go to c:\windows\system32 copy and replace in ADB folder)
>write in ADB:
fastboot flash recovery TWRP.img
> when finish the flash, press vol + and power
> go to install and choose your ROM
>install ( you can read the steps in flash, look at it)
>Phone reboot in to boot loop,
>press VOL + and dont release to go to recovery
>in recovery do factory reset, and do reboot system
>set defenitions in the phone (wifi, google,etc)
>reboot
>DONE
------------------------->What are the differences ?
> Comes with root (kingUser) and BusyBox
> The Clean version - No google apps and no default games ( apps can be found on google play)
> Full version - cames with all ( games, Facebook, etc)
>same build.prop tweaks
>better image
>faster
>and faster boot
Versions i made:
Vodafone PT Full version- https://meocloud.pt/link/ae253a50-b512-4fd9-9a55-24132a2401b7/Full__B370_V3.zip/
Vodafone PT clean version- https://meocloud.pt/link/46612166-3068-46aa-a4c9-58d9688b4c2d/Full_and_clean_B370_V3.zip/
Vodafone RO Full Version - https://meocloud.pt/link/40ebddae-1c21-4428-9c74-e3775144799d/VDF_RO_Full__B370_V3.zip/
Hw SPS Clean Version - https://meocloud.pt/link/9d8520dd-e0df-42d0-af9d-e07c92c86f21/hw_spc_Full_and_clean_B370_V3.zip/
>>>>>>>>>>>>>>>>>>>>>>>> NEW <<<<<<<<<<<<<<<<<<<<<<<<<<<< 23-04-2015
VDF_HU_Full_and_clean_B370_V3 --> https://meocloud.pt/link/c5d197da-0ae8-4815-b7a1-d8bc65a3f259/VDF_HU_CLEAN__B370_V3.zip/
HW_NORMAL_Full_and_clean_B370_V3 --> https://meocloud.pt/link/d5cebf99-a036-46c9-a483-7476e03d308c/HW_NORMAL_Full_and_clean_B370_V3.zip/
>
>
> If you whant to try a DEODEX ROM go here:
http://forum.xda-developers.com/ascend-g6/development/deodex-huawei-g6-l11-kitkat-t3093611
Enjoy
>
>
Bluetooh tethering is off by default but can be turned ON!
For those who lack the Bluetooth Tethering :
This in my case, go to /cust/vodafone/pt/prop/local.prop
look for ro.config.hide_bt_tethering , now change from true to false.
reboot.
Someone in Huawei thought we would no longer use it!
>
>
>
*Any Bug that you find please say.
There are many versions of the /cust , so it is possible that in the end, is missing Huawei applications like backup, and themes do not work, but can be repaired .
The ROM already have root, install the root browser , go to /data/custom.bin folder and open as text, in my custom.bin says vodafone/pt so my folder inside the /cust says vodafone, and the inside vodafone says pt. Change as it says on your custom.bin . Do a factory reset, Done.
Root Browser:
https://meocloud.pt/link/4b8303d5-1...r-com.jrummy.root.browserfree-223-v2.2.3.apk/
See the comments on Facebook:
https://www.facebook.com/groups/328261053999820/440388999453691/?notif_t=group_comment
persona78 said:
Huawei Ascend G6 - L11 Update to Kit Kat (From B127 to B370).
Good News for B127 users!
----I am not responsible for any damage to your device. Everything here indicates was tested on my phone finding the same in perfect condition.----
This is all tools and img you need:
https://meocloud.pt/link/1b4a9bd1-c9ad-4832-a366-b3522464f3fb/B127 to B370/
>B370_V2 is a ROM for Vodafone Pt (if you custom.bin says vodafone/pt)
>VDF_RO_B370_V2 is a ROM for Vodafone Ro (if you custom.bin says vodafone/ro)
In the end are missing apps, like clock, or themes dont work? Is because in /data/custom.bin says different than /cust from the ROMs from above, but dont have importance . You can fix it.
To fix /cust, in the end and with root, change the names in /cust folder, for the names in YOUR /data/custom.bin (open like a text file), use root browser to do it.
exemple in my /cust , first folder says vodafone" and inside "pt" because my custom.bin says "vodafone/pt". If yours says ee/es you must change "vodafone" to "ee" and "pt" to "es".
In the end YOU MUST DO a factory reset and all be fixed.
In my ADB TOOLS folder you have all ready system, twrp and default recovery img.
... For those who have already upgraded from the old tute ... you have to put the B127 again, only flash , nothing more, dont need to fix /cust.
(A) - Copy B127 dload folder to ext sd. With phone off press vol up + vol down + power, release power when turn on, release all when start.
ROM B127 (in case of emergency will need it) (A)
https://meocloud.pt/link/1403dc42-8...ei_Ascend_G6-L11_V100R001C00B127_General.rar/
Now:
Copy to external card the following:
>B370_v2.zip or VDF_RO_B370_V2
>UPDATE-Kinguser-3.4.0.zip (if you whant to root)
Open adb terminal ( attention , if you use a different version of windows than 7, you will have to copy c: \ windows \ system32 \ cmd.exe to adb terminal folder replacing what is there ), open by clicking cmd.exe.
Turn off the phone , press vol - and power to boot in fastboot:
Write this:
>fastboot flash recovery twrp.img
press vol + and power , install (B370_V2.zip) or (VDF_RO_B370_V2.zip), (DO NOT TURN OFF THE PHONE, YOU WILL BRICK, IF HAPPEN FLASH B127 AGAIN)
, press vol - and power AND DONT RELEASE!!!!!!!! RELEASE ONLY WHEN SEE FASTBOOT MODE!
write this:
fastboot flash system system.img
fastboot reboot
Turn ON ignore everything and make factory restore.
Congratulations! You are on B370, completed. laugh: )
To root:
Open adb terminal by clicking cmd.exe.
Turn off the phone , press vol - and power to boot in fastboot:
Write this:
>fastboot flash recovery twrp.img
press vol + and power
>install UPDATE-Kinguser-3.4.0.zip
Advise you to return to put the default recovery
Open adb terminal by clicking cmd.exe.
Turn off the phone , press vol - and power to boot in fastboot:
Write this:
>fastboot flash recovery recovery.img
>fastboot reboot
With root is possibel to remove system app like Facebook or games, use this app:
https://play.google.com/store/apps/details?id=com.jumobile.manager.systemapp&hl=en
Any Bug that you find please say.
See comments in Facebook: https://www.facebook.com/groups/328261053999820/permalink/440388999453691/
------------------------------------------------------------------------------------------------------------------
-----> (I think is possible to update other ROMs for the G6 - L11 . I cant test this.)
-----> (I think that also works in the L22 , L33 , as they have the same kernel than L11, and this update does not change the oesmbl signature . If someone try leave the feedback for other users.)
I can not make a promise to recover your default ROM because I never did before for this model above, but if you want to try to need you to do this first:
root:
install root browser
go to /dev/block and copy to sd card all files from mmcblk0p1 to mmcblk0p25 ( i dont remeber if 25 let copy...)
do it 1 by 1, than in pc do a zip, i you need may be i can do a recovery for your default ROM from this files.
Enjoy
Click to expand...
Click to collapse
Thanks, works great after I chaged my cust folder from Vodafone/pt to dt/pl :good:
You're welcome
mngt13 said:
Thanks, works great after I chaged my cust folder from Vodafone/pt to dt/pl :good:
Click to expand...
Click to collapse
I'm glad I helped you .
Works perfectly
Worked like a charm for me.
Thank you very much.
But I have a question.
I looked inside the zip file. It extracts the img files and writes them to the block devices which is a great idea. Bravo!
But why didn't you do the same thing for system.img? Why flashing it through fastboot?
Hi! In my first try I had system in zip, but phone bricks, I don't know way.
But I have a new versions, they are completed, one clean (no games, and no google apps like music, etc, etc) the other is normal, and came all ready rooted and with busibox. Build.prop came tweaked to.
I saw you uploaded some *FULL* versions as well and put system.img inside them.
Putting system.img inside the zip works? I thought maybe because of the huge size of system.img and the fact that G6-L11 has only 1GB of RAM, it might fail.
P.S.:
Why do you mount system and cust and then unmount them afterwards?
Mount and unmount to force and link data, and all works I flash more than one time this version.
Dont stay in Ram because write directly in the images.
Boot loop when reboot but when go to recovery it is fixed.
very nice work persona78, and thank you for the explanation.
Hi there persona, glad i found your tutorial. It saved me from the B127 hell!
Only one question, is there any way to solve the 4G issue. It is always there even if we turn of mobile data.
Btw, after we install the B370 can we downgrade to B118 or it will get stuck with B127 again? And of we can does it have to be with twrp or normal SD update?
Thanks in advance,
Queiroz
Hi! That is not a issu, if says 4G is because is plugged to 4G, don't mean is sending or receiving data, To switch network, go to short cut bar and press network data icon and dont release, in that menu you can change your net work, 2, 3,4G. From default update.app, no but I have a zip file to do, why roll back? The oesmbl from updates same times dont match and do issus. The zip do a bypass on oesmble check.
Wow that was a fast reply, thanks I thought it was a problem from the ROM. The only reason I wanted to downgrade was because I thought it was a "ROM bridge problem". Since huawei recommends that we upgrade from 118 to 370. Thanks a lot though.
Queiroz
They say to update from b118 because b370 have the same oesmble, but, like I say, my zip file do a bypass and ignore that
Could you please explain the difference between this versions?
VDF_HU_Full_and_clean_B370_V3 --> https://meocloud.pt/link/c5d197da-0a...__B370_V3.zip/
HW_NORMAL_Full_and_clean_B370_V3 --> https://meocloud.pt/link/d5cebf99-a0...n_B370_V3.zip/
The first is for Vodafone hu ( with /data/custom.bin vodafone/hu )
The sec is the default that came with rom ( with /data/custom.bin hw/normal )
persona78 said:
Huawei Ascend G6 - L11 How to Update to Kit Kat when the normal update does not work and gives error. (as happened to me from Rom B127 to B370 )
Works in others ROMs and phone versions( P7mini).
It does not work in L22 and L33 , although it is the same phone, but the provider configuration is totally different, frequencies , network codes, etc.
If someone able to change or create , it may be possible to upgrade .
L11 - Europe
L22 - Venezuela
L33 - Colombia
Sorry :\
>>>>>>>>>>>> ALLWAYS HAVE A BACKUP AND A BACKUP FROM YOUR DEFAULT ROM!!!<<<<<<<<<<<<<<<<<<
----I am not responsible for any damage to your device. Everything here indicates was tested on my phone finding the same in perfect condition.----
>
I already flashed more than one time, in tests , doing the versions , etc. , and all ways work .
But, as in the other version , there are who may have difficultys ...
>
>
>>>B370_V3<<<
>
-->First need the unlocked bootloader :
Send the following e -mail to - [email protected] and [email protected]
Hi! My name is ( your name ), and I hereby request the bootloader code for my smartphone HUAWEI ASCEND G6 - (your default version) if possible .
Product SN : (It is on the back of the equipment )
IMEI : (on key pad *#06# )
Product ID : ( the key pad *#*#1357946#*#* )
Thank you for your attention
( Your name)
>
>
ABD Terminal - https://meocloud.pt/link/986dfd7e-1d97-4458-9806-a576ceb90084/adb terminal/
>
TWRP. recovery - is in the ADB folder from above
>
copy the ROM to external SD Card. (see what is write in /data/custom.bin, open like a text file and choose the ROM with the same ref.)
if there is no ROM with your defenitions you can fix in the end of flash, choose B370_V3 and change vodafone to the first name you find in custom.bin, enter the folder and change the second folder name with the second name you find in custom.bin, exemple my was vodafone/pt, so my first folder is vodafone and the inside, the second folder, is pt. Always small fonts and do a factory reset.
>
> Turn OFF the phone
>press vol - and power (fastboot mode)
>open ADB in cmd ( the cmd inside ADB is from windows 7 64BIT, if you use other version, go to c:\windows\system32 copy and replace in ADB folder)
>write in ADB:
fastboot flash recovery TWRP.img
> when finish the flash, press vol + and power
> go to install and choose your ROM
>install ( you can read the steps in flash, look at it)
>Phone reboot in to boot loop,
>press VOL + and dont release to go to recovery
>in recovery do factory reset, and do reboot system
>set defenitions in the phone (wifi, google,etc)
>reboot
>DONE
------------------------->What are the differences ?
> Comes with root (kingUser) and BusyBox
> The Clean version - No google apps and no default games ( apps can be found on google play)
> Full version - cames with all ( games, Facebook, etc)
>same build.prop tweaks
>better image
>faster
>and faster boot
Versions i made:
Vodafone PT Full version- https://meocloud.pt/link/ae253a50-b512-4fd9-9a55-24132a2401b7/Full__B370_V3.zip/
Vodafone PT clean version- https://meocloud.pt/link/46612166-3068-46aa-a4c9-58d9688b4c2d/Full_and_clean_B370_V3.zip/
Vodafone RO Full Version - https://meocloud.pt/link/40ebddae-1c21-4428-9c74-e3775144799d/VDF_RO_Full__B370_V3.zip/
Hw SPS Clean Version - https://meocloud.pt/link/9d8520dd-e0df-42d0-af9d-e07c92c86f21/hw_spc_Full_and_clean_B370_V3.zip/
>>>>>>>>>>>>>>>>>>>>>>>> NEW <<<<<<<<<<<<<<<<<<<<<<<<<<<< 23-04-2015
VDF_HU_Full_and_clean_B370_V3 --> https://meocloud.pt/link/c5d197da-0ae8-4815-b7a1-d8bc65a3f259/VDF_HU_CLEAN__B370_V3.zip/
HW_NORMAL_Full_and_clean_B370_V3 --> https://meocloud.pt/link/d5cebf99-a036-46c9-a483-7476e03d308c/HW_NORMAL_Full_and_clean_B370_V3.zip/
>
>
> If you whant to try a DEODEX ROM go here:
http://forum.xda-developers.com/ascend-g6/development/deodex-huawei-g6-l11-kitkat-t3093611
Enjoy
>
>
Bluetooh tethering is off by default but can be turned ON!
For those who lack the Bluetooth Tethering :
This in my case, go to /cust/vodafone/pt/prop/local.prop
look for ro.config.hide_bt_tethering , now change from true to false.
reboot.
Someone in Huawei thought we would no longer use it!
>
>
>
*Any Bug that you find please say.
There are many versions of the /cust , so it is possible that in the end, is missing Huawei applications like backup, and themes do not work, but can be repaired .
The ROM already have root, install the root browser , go to /data/custom.bin folder and open as text, in my custom.bin says vodafone/pt so my folder inside the /cust says vodafone, and the inside vodafone says pt. Change as it says on your custom.bin . Do a factory reset, Done.
Root Browser:
https://meocloud.pt/link/4b8303d5-1...r-com.jrummy.root.browserfree-223-v2.2.3.apk/
See the comments on Facebook:
https://www.facebook.com/groups/328261053999820/440388999453691/?notif_t=group_comment
Click to expand...
Click to collapse
hi the ADB terminal link is down can you reupload it ? thank you
and does it also work on g6-U10?
Thank you, I will correct it.
The tutorial is for G6 L11 but ADB works in every model.
ADB FIXED!
yildirim400 said:
hi the ADB terminal link is down can you reupload it ? thank you
and does it also work on g6-U10?
Click to expand...
Click to collapse
Hi have fix the ADB link!
Hi, I flashed your Vodafone PT clean version with a success. Thank you!
I have a question:
Is EMUI 3.0 for g6 different from EMUI 3.0 on other devices?
As I saw that lockscreen on honor p6 have a settings icon thus can be customize whilst our doesn't. at least I haven't find a way to customize lockscreen. also there is magazine unlock feature missing from it.
Thank you.
The lock screen, that can be change with a theme, when you install a EMUI 3 theme, same settings like lock screen, or music widgets can be changed.
persona78 said:
Thank you.
The lock screen, that can be change with a theme, when you install a EMUI 3 theme, same settings like lock screen, or music widgets can be changed.
Click to expand...
Click to collapse
Thanks for the reply.
I found some P8 stock themes that includes unlock magazine feature and it works with g6 L11.
here is a link to mega:
https://mega.co.nz/#!zB0HxaCb!Yb7Q1ZfheM_Xt7o1Oe_WVks1mw9xbDV78FQ-BnqtHSc
file has 157.1 MB
>>>>>>>READ ALL TO THE END FIRST!<<<<<<
>
>>>>>>>>>>>If you ALL READY HAVE TRY IT AND FAIL, you can't flash B118 or B370 from dload folder, GO to this link:
http://forum.xda-developers.com/ascend-g6/general/g6-l11-b127-rom-how-to-upgrade-to-kit-t3079179
>
>
4.4.2 (B370) only can be upgraded from B118, its the base for B370 version, same oesmbl.
So, you need to install B118 first.
->Download B118
Official B118 ROM from Huawei Cambodia Server:
http://consumer.huawei.com/kh/support/products/downloads/detail/ascend-g6-4g-kh.htm?id=25971
Official B118 from Huawei French Server:
http://consumer.huawei.com/fr/support/downloads/detail/index.htm?id=24242
->->extract dload folder from B118
->paste in to external sd card the dload folder
->go to key pad and write this: *#*#2846579#*#*
-> Open ProjectMenu
->Upgrade
->SD card upgrade
Phone reboot and install B118
Now B370:
http://consumer.huawei.com/kh/support/products/downloads/detail/ascend-g6-4g-kh.htm?id=38361
->extract dload folder from B370.
->Delete dload from B118 from the external sd card and paste the dload folder from B370.
->go to key pad and write this: *#*#2846579#*#*
-> Open ProjectMenu
->Upgrade
->SD card upgrade
In the end will be miss same apps, themes dont work, etc... or you are a lucky man/woman and your custom.bin is the same than Cust folders!
TO FIX:
Need boot loader unlocked!
Request unlock code to Huawei by e-mail:
Hi!
My name is (your name) and I hereby request the bootloader code for my new smartphone HUAWEI ASCEND (your phone model) if possible.
Product SN: (In the backs)
IMEI: ( in key pad *#06# )
Product ID: ( in key pad *#*#1357946#*#*)
Thank you for your attention;
(your name)
This are the e-mails :
[email protected]; [email protected]
With luck only takes 1 day, bad luck from 1 week to 3 or more weeks...
---------> Or you can find it with DC-Unlocker
1. Download DC-Unlocker but only this version works, install it and reboot :
https://mega.nz/#!ykxjiRia!ppWG22acgv35N5j1VMTsZlKMi0i0JQB9v8BVn5l98WI
DC-unlocker-client-software-V1_00_1201
2. Turn ON debug mode
Go to Settings -> About phone -> Press several times Build number it will say "you are a developer now" -> go back and open Developer options ->Turn ON USB debugging -> DONE
3. Install ADB drivers with Hisuite ( best way ):
http://consumer.huawei.com/minisite/HiSuite_en/
The first time HiSuite try to connect with the phone, in the screen phone it will pop up a Windows requesting permissions for the connection with PC, MUST GIVE IT!
4. It need to enable USB Manufacturer Mode in phone:
In dial pad type code *#*#2846579#*#*
select "Project Menu"
"Background settings"
"USB ports settings"
"Manufacturer mode" (IF OPEN THE MENU TO CHOOSE THE USB CONNECTION PRESS RETURN TO GO BACK TO CONFIRME)
"CORFIRME"
And Reboot the phone,.
5. Connect Phone to usb (MY DEBUG MODE WAS ON AND USB FLASH DRIVE WAS SELECTED) and open DC UNLOCKER.
6. Select Huawei Phones in manufacturer and leave the model Auto detect
7. Click on the magnifing glass and wait for detection
8. You will see the bootloader code appears in the BOX bellow.
9. Use this software and the unlock bootloader option, 18 option:
https://mega.nz/#!S95yRYbY!vxh7daocU-_q4bXb4cu88b_UMqybJxt8Fh24z9mmcck
----------------------------------------
->With the code, download this:
ADB with Huawei_Bootloader_Unlocker, TWRP.img, RECOVERY.IMG and KingUser zip:
https://meocloud.pt/link/32ef02e9-4fd9-4963-ab33-622536ff34ff/ADB/
https://meocloud.pt/link/47a61397-d200-4862-bd99-1aa573fa8fe7/TWRP.img/
https://meocloud.pt/link/a630b21b-e2b4-4253-8ca3-f1a1aa3bd4cf/RECOVERY.img/
https://meocloud.pt/link/0d060247-9d19-471e-8848-4a9e5681cd1a/UPDATE-Kinguser-3.4.0.zip/
->ADB drivers are inside ADB_TOOLS, install them.
->Turn off the phone, press vol - and power, release power on boot, vol when you see fastboot screen.
->wait to PC install the phone.
http://s23.postimg.org/48y8249zv/Imagem1.jpg
->The first icon in Huawei_Bootloader_Unlocker is to check if device is connected, must expand the cmd window to see it, is the first window in the image from above, must have same thing like that.
-> copy the code to Huawei_Bootloader_Unlocker, easy to see where you are going to paste.
-> Phone reboot with out error msg if you have done correctly, if get error check the code.
->Copy Kinguser zip to External SD card
-> Turn off again
->Press vol - and power, release power on boot, vol when you see fastboot screen. Must say unlocked in the end of page.
->Now Open the folder inside ADB Tools, ADB_TOOLS, the cmd inside is from Windows 7 64 bit, if you have a diferent Windows, go to c:\windows\system32 and COPY to REPLACE the cmd in ADB_TOOLS
-> COPY TWRP.img in to ADB_TOOLS folder
->Execute cmd
->write this
fastboot flash recovery twrp.img
-> unplug usb, press vol+ and power, dont release, when boot release power, when you see TWRP screen release vol.
->go to install an look for kinguser zip, install it, phone reboot
->go to google play and look for root browser and install it.
->with root browser go to /data look for custom.bin, open like a text file, you will see same thing like ex: vodafone/pt , go to /cust now, inside cust change hw to the first name, in my case vodafone, open vodafone, inside change normal to second name, in my case pt, use small font!
>
---->Root Browser:
https://meocloud.pt/link/4b8303d5-1...r-com.jrummy.root.browserfree-223-v2.2.3.apk/
>
>
----->To recover the DTMF tone (in my case) go to /cust/vodafone/pt/xml look for hw_defaults.xml, open like a text file and find this line:
<integer settings.system.dtmf_tone="0" reset="true"/>
change to:
<integer settings.system.dtmf_tone="1" reset="true"/>
>
>
>
->Fix Bluetooh tethering:
This in my case, go to /cust/vodafone/pt/prop/local.prop
look for ro.config.hide_bt_tethering , now change from true to false.
-> turn off the phone
->copy the default recovery.img to ADB folder
->Press vol - and power, release power on boot, vol when you see fastboot screen.
->Execute cmd
->write this:
fastboot flash recovery recovery.img
fastboot reboot
-> To clean any bug do factory reset
--->End of story!!
DONE
>
>
------>>>>>>After install the ROM B370, fix cust, fix bluetooh tethering, etc,
YOU WANT A CLEAN ROM with NO root, etc, etc, you can do this:
>
->bootloader must be unlocked
->Paste default system.img in ADB folder
->Turn off the phone
->press vol - and power
-> Open ADB commands and write:
fastboot flash system system.img
-wait ot finish
->power off
->power on
->NOW YOU HAVE A DEFAULT ROM, NO ROOT, ETC, ETC.
-> If you have DEFAULT recovery do factory reset to wipe/fix data for default ROM
-> If you have TWRP, reboot in TWRP and do factory reset in there.
>
>
>
>
B370_default_SYSTEM_and_RECOVERY
https://meocloud.pt/link/1d7a17b2-90d8-41ba-aa5e-7e937f96180a/B370_default_SYSTEM_and_RECOVERY/
>
>
>>>>>>>>>>>If you FAIL in the beginning, you can't flash B118 or B370 from dload folder, GO to this link:
http://forum.xda-developers.com/ascend-g6/general/g6-l11-b127-rom-how-to-upgrade-to-kit-t3079179
persona78 said:
>>>>>>>READ ALL TO THE END FIRST!<<<<<<
>
>>>>>>>>>>>If you ALL READY HAVE TRY AND FAIL, you can't flash B118 or B370 from dload folder, GO to this link:
http://forum.xda-developers.com/ascend-g6/general/g6-l11-b127-rom-how-to-upgrade-to-kit-t3079179
>
>
4.4.2 (B370) only can be upgraded from B118, its the base for B370 version, same oesmbl.
So need to install B118 first.
->Download B118
Official B118 ROM from Huawei Cambodia Server:
http://consumer.huawei.com/kh/support/products/downloads/detail/ascend-g6-4g-kh.htm?id=25971
Official B118 from Huawei French Server:
http://consumer.huawei.com/fr/support/downloads/detail/index.htm?id=24242
->Extract to external sd card the dload folder
->go to key pad and write this: *#*#2846579#*#*
-> Open ProjectMenu
->Upgrade
->SD card upgrade
Phone reboot and install B118
Now B370:
http://consumer.huawei.com/kh/support/products/downloads/detail/ascend-g6-4g-kh.htm?id=38361
->Delete dload from B118 and extract to external sd card the dload folder from B370.
->go to key pad and write this: *#*#2846579#*#*
-> Open ProjectMenu
->Upgrade
->SD card upgrade
In the end will be miss same apps, themes dont work, etc... or you are a lucky man/woman and your custom.bin is the same than Cust folders!
TO FIX:
Need boot loader unlocked!
Request unlock code to Huawei by e-mail:
Hi!
My name is (your name) and I hereby request the bootloader code for my new smartphone HUAWEI ASCEND (your phone model) if possible.
Product SN: (In the backs)
IMEI: ( in key pad *#06# )
Product ID: ( in key pad *#*#1357946#*#*)
Thank you for your attention;
(your name)
This are the e-mails :
[email protected]; [email protected]
With luck only takes 1 day, bad luck from 1 week to 3 or more weeks...
->With the code, download this:
ADB with Huawei_Bootloader_Unlocker, TWRP.img, RECOVERY.IMG and KingUser zip:
https://meocloud.pt/link/32ef02e9-4fd9-4963-ab33-622536ff34ff/ADB/
https://meocloud.pt/link/47a61397-d200-4862-bd99-1aa573fa8fe7/TWRP.img/
https://meocloud.pt/link/a630b21b-e2b4-4253-8ca3-f1a1aa3bd4cf/RECOVERY.img/
https://meocloud.pt/link/0d060247-9d19-471e-8848-4a9e5681cd1a/UPDATE-Kinguser-3.4.0.zip/
->ADB drivers are inside ADB_TOOLS, install them.
->Turn off the phone, press vol - and power, release power on boot, vol when you see fastboot screen.
->wait to PC install the phone.
http://s23.postimg.org/48y8249zv/Imagem1.jpg
->The first icon in Huawei_Bootloader_Unlocker is to check if device is connected, must expand the cmd window to see it, is the first window in the image from above, must have same thing like that.
-> copy the code to Huawei_Bootloader_Unlocker, easy to see where you are going to paste.
-> Phone reboot with out error msg if you have done correctly, if get error check the code.
->Copy Kinguser zip to External SD card
-> Turn off again
->Press vol - and power, release power on boot, vol when you see fastboot screen. Must say unlocked in the end of page.
->Now Open the folder inside ADB Tools, ADB_TOOLS, the cmd inside is from Windows 7 64 bit, if you have a diferent Windows, go to c:\windows\system32 and COPY to REPLACE the cmd in ADB_TOOLS
-> COPY TWRP.img in to ADB_TOOLS folder
->Execute cmd
->write this
fastboot flash recovery twrp.img
-> unplug usb, press vol+ and power, dont release, when boot release power, when you see TWRP screen release vol.
->go to install an look for kinguser zip, install it, phone reboot
->go to google play and look for root browser and install it.
->with root browser go to /data look for custom.bin, open like a text file, you will see same thing like ex: vodafone/pt , go to /cust now, inside cust change hw to the first name, in my case vodafone, open vodafone, inside change normal to second name, in my case pt, use small font!
>
---->Root Browser:
https://meocloud.pt/link/4b8303d5-1...r-com.jrummy.root.browserfree-223-v2.2.3.apk/
>
>
----->To recover the DTMF tone (in my case) go to /cust/vodafone/pt/xml look for hw_defaults.xml, open like a text file and find this line:
<integer settings.system.dtmf_tone="0" reset="true"/>
change to:
<integer settings.system.dtmf_tone="1" reset="true"/>
>
>
>
->Fix Bluetooh tethering:
This in my case, go to /cust/vodafone/pt/prop/local.prop
look for ro.config.hide_bt_tethering , now change from true to false.
-> turn off the phone
->copy the default recovery.img to ADB folder
->Press vol - and power, release power on boot, vol when you see fastboot screen.
->Execute cmd
->write this:
fastboot flash recovery recovery.img
fastboot reboot
-> To clean any bug do factory reset
--->End of story!!
DONE
>
>
------>>>>>>After install the ROM B370, fix cust, fix bluetooh tethering, etc,
YOU WANT A CLEAN ROM with NO root, etc, etc, you can do this:
>
->bootloader must be unlocked
->Paste default system.img in ADB folder
->Turn off the phone
->press vol - and power
-> Open ADB commands and write:
fastboot flash system system.img
-wait ot finish
->power off
->power on
->NOW YOU HAVE A DEFAULT ROM, NO ROOT, ETC, ETC.
-> If you have DEFAULT recovery do factory reset to wipe/fix data for default ROM
-> If you have TWRP, reboot in TWRP and do factory reset in there.
>
>
>
>
B370_default_SYSTEM_and_RECOVERY
https://meocloud.pt/link/1d7a17b2-90d8-41ba-aa5e-7e937f96180a/B370_default_SYSTEM_and_RECOVERY/
>
>
>>>>>>>>>>>If you FAIL in the beginning, you can't flash B118 or B370 from dload folder, GO to this link:
http://forum.xda-developers.com/ascend-g6/general/g6-l11-b127-rom-how-to-upgrade-to-kit-t3079179
Click to expand...
Click to collapse
I followed instructions and flashed B370. Now my home button is not working
You have G6 L11?
persona78 said:
You have G6 L11?
Click to expand...
Click to collapse
G6-L33
"the same as L22 and L11"
Sorry, Its the same is true, but this is for Europe and files are diferent from Colombia, thats way the issue..
It does not work in L22 and L33 , although it is the same phone with the same kernel, but the provider configuration is totally different, frequencies , network codes, etc.
I did not know because no one yet with these models had reported , I found this incompatibility shortly ...
If someone able to change or create , it may be possible to upgrade .
L11 - Europe
L22 - Venezuela
L33 - Colombia
Sorry :\
works great . thanks a lot man
i updated to B370 successfuly, everything working fine except Motion Control. when i go to "Motion Control" in Settings, there is nothing there (a blank white screen).
I remember this problem was in P6 EMUI 3 too and a patch was there to fix it. any patches for G6?
Same thing goes rong. Sensors must work! Or pictures rotate?
If not, flash b118 again, than b370. Don't forget factory reset after change cust folders names.
:good:
Excellent guide, you did a summary of four different things in one and easy to understand. For your mastery of the subject I wanted to ask your help to use my Huawei G6-U00 with firmware of China, which has unlocked WCDMA 1900 MHz band, so I can not use the phone in 3G in Venezuela.
Is there a way to unlock it?
I have tried to Engineer Mode, but it asks a code that is not known Huawei (0, 0000, 1234), . Also I tried the QPST program, but despite being recognized as a modem, do not read as a telephone and does not communicate with the RF_NV_Item_Manager.
Thanks in advance!!
Mario
Hmmm, unlock bootloader, root it and do backup from your ROM. than try b136 u251 rom, from colombia. You can use g6sknife to do backup (need root).
oemsbl version list check error!
persona78 said:
Hmmm, unlock bootloader, root it and do backup from your ROM. than try b136 u251 rom, from colombia. You can use g6sknife to do backup (need root).
Click to expand...
Click to collapse
I have Bootloader unlocked, Rooted, and CWM as Recovery.
I installed G6-U251 B136 dload in SDcard, Note ( in my U00), and gave me the following errors; oemsbl version list check error!, ?V write data error, Error; Update.app is an invalid package, Sd card update failure, SD card update abort.
I used the default recovery cause the CWM asks a zip file. and I unzipped the file and place it in the folder Dload in SDcard.
Any advice?
marioarnaldo1965 said:
I have Bootloader unlocked, Rooted, and CWM as Recovery.
I installed G6-U251 B136 dload in SDcard, Note ( in my U00), and gave me the following errors; oemsbl version list check error!, ?V write data error, Error; Update.app is an invalid package, Sd card update failure, SD card update abort.
I used the default recovery cause the CWM asks a zip file. and I unzipped the file and place it in the folder Dload in SDcard.
Any advice?
Click to expand...
Click to collapse
Oesmble...
Only if same one extract u251 images from phone and create a flash zip.
Try in huawei g6 development, in Facebook.
Sent using XDA One
Oesmble problem
persona78 said:
Oesmble...
Only if same one extract u251 images from phone and create a flash zip.
Try in huawei g6 development, in Facebook.
Sent using XDA One
Click to expand...
Click to collapse
I belong to this group in Face.. And there isn´t answer yet!!. Which Tool should i use to debrand the u251.? i don´t know if is it possible to flash the radio part of the rom in my default ROM!!... What do you think?
thanks in advance!!
marioarnaldo1965 said:
I belong to this group in Face.. And there isn´t answer yet!!. Which Tool should i use to debrand the u251.? i don´t know if is it possible to flash the radio part of the rom in my default ROM!!... What do you think?
thanks in advance!!
Click to expand...
Click to collapse
After you do backup with g6sknife, there is a tool you can use, is the rom extractor, is in g6skinfe to.
Extract system, cust modems.
Copy system to cmd folder, boot in fastboot (bootloader), use cmd option, than flash system if fail you need to restore your backup, because you stay with out system, if you get success, put cust and modems in backup zip and use cwm to flash it. If you get success to, you need to change cust to your provider.
Sent using XDA One
G6_L11 problem after update...
Hello...
I have a G6-L11, Digitel Venezuela ...
Since I did ROM upgrade, the gyroscope and proximity sensors do not work, either lighting and ...
What can I do..??
problem with g6 rom
hi
i hope someone can help me with a little problem on my Huawei G6 smartphone.
the model is a G6-U10
but currently i have a U00 rom installed (B370, downloaded from the official Huawei site, probably the Chinese one)
installation of this rom went smooth, but this build has some serious shortcomings, so i wanted to install another rom. but that appears to be impossible!
I tried several U10, C00 and L11 roms, ranging from build B118, B193, B261,B330 and B370. most download from the official Huawei servers. and I also tried rollbacks, (U10 B360 to B136 and L11 B370 to B118), but nothing seems to work.
mostly i get the message "version list error" with some other things.
it's weird that i managed to install a U00 rom on a U10 device, but now it seems that i can't install anything from other models than U00 ánd roms that are older than the current one (B370), which is the problem, because this is the newest i think... so i can't find any other rom that i can install...
the phone is not rooted. i tried is with Vroot and Rood Genius, but it didn't work. why, i don't know. i don't even know what i precisely would do when the phone is rooted... but that's another story
I really want to install a proper working (preferably EU) rom on my G6, and at this point it doesnt matter to me how old the build is...
problem with the current rom U00 B370 is mostly this:
i can't add my Google account for the phones' contacts
play store can't install any apps
can anyone help me? cant i rollback to a better build or something?
freduce said:
hi
i hope someone can help me with a little problem on my Huawei G6 smartphone.
the model is a G6-U10
but currently i have a U00 rom installed (B370, downloaded from the official Huawei site, probably the Chinese one)
installation of this rom went smooth, but this build has some serious shortcomings, so i wanted to install another rom. but that appears to be impossible!
I tried several U10, C00 and L11 roms, ranging from build B118, B193, B261,B330 and B370. most download from the official Huawei servers. and I also tried rollbacks, (U10 B360 to B136 and L11 B370 to B118), but nothing seems to work.
mostly i get the message "version list error" with some other things.
it's weird that i managed to install a U00 rom on a U10 device, but now it seems that i can't install anything from other models than U00 ánd roms that are older than the current one (B370), which is the problem, because this is the newest i think... so i can't find any other rom that i can install...
the phone is not rooted. i tried is with Vroot and Rood Genius, but it didn't work. why, i don't know. i don't even know what i precisely would do when the phone is rooted... but that's another story
I really want to install a proper working (preferably EU) rom on my G6, and at this point it doesnt matter to me how old the build is...
problem with the current rom U00 B370 is mostly this:
i can't add my Google account for the phones' contacts
play store can't install any apps
can anyone help me? cant i rollback to a better build or something?
Click to expand...
Click to collapse
First, if you have a U10 why you flash a U00 ROM? ...
Google G6 U10 b146, try to install it.
Tell if you made it?
G6 ROMS
There are a lot of steps to do.. Open Bootloader, Root the Phone, Install Custom Bootloader, Flash a new Rom for G6-U10.
All these Steps are full Explained in GG Development Group in Facebook.
Send a request join message, and in Pinned Post. Read , read and read. There are a lot of information and a ROM that fit your ROM. What does it mean UE in your Question? United States? Union Europa´s? the ROMS are quite different.
.....
some of these links have been 'removed'
please
can you like please fix the link
:good:
How To Root Asus Zenfone Max M1 ZB555KL X00PD
First download the material
> UBL & MAGISK: Download Here
> Required Firmware : Download Here
Step by Step
> Install the firmware first
> Recovery mode (turn off your smarthphone, then press volume down + power)
> update via adb
> Connect the handphone to the PC / laptop
> press shift + right click select open command windows here then type "ADB SIDELOAD NAMAFIRMWARE.ZIP" without quotes
> ENTER
> Wait until the process is complete
> Reboot the System
how to unlock bootloader
> Extract all ingredients that have been downloaded
> Copy the file called "UnlockTool_ASUS_Android_signed_E300_1.apk" to your Smarthphone
> Then install "UnlockTool_ASUS_Android_signed_E300_1.apk"
> Here you backup first because it will format the data on your smartphone
> Open the unlock apk, then follow the instructions until Smarthphone restarts by itself
INSTALL MAGISK
> Enable unlocking OEM & USB debugging
> open settings -> about cellphone -> information software -> build number and click 7X -> back -> OPTION DEVELOPERS
> double-click install.bat
> And wait for your smarthphone to reboot automatically
> DONE
Your Asus Zenfone Max M1 already Unlock Bootloader and installed Magisk
reserved
Is this legit? Thanks.
is the downgrading part necessary?
I suppose you have a healthy RIVER running Android 10 stock , cool ! Let's get started.
Prerequisites :
1] River , USB-C Cable and a PC.
2] ADB and fastboot installed (system-wide preferred)
3. Unlocked Bootloader
4] i] Rom - Rom.zip
ii] Custom Recovery - recovery.img & recovery.zip [TWRP]
iii] copypartitions.zip
iv] gapps.zip (optional)
5] Make sure you've backed up your data.
Procedure :
1] Remove the Sim Card(s) from the Phone and Power it OFF.
2] Boot your Phone into Bootloader Mode by long pressing Volume Down + Power Button.
3] Once you're in the Bootloader Mode, locate the twrp.img on your PC , open a command prompt there , type in fastboot boot twrp.img , for example : fastboot boot twrp-3.4.0.1.img
4] Once you're booted into the TWRP , Click on WIPE > FORMAT DATA > TYPE YES , If it's done , Return to the Home Screen of TWRP , Click on REBOOT > BOOTLOADER.
5]Boot the twrp.img again like you did earlier , Once you're booted , Click on WIPE > ADVANCED WIPE > tick "INTERNAL STORAGE , SYSTEM , DATA , CACHE" , basically everything except "MICRO-SD and USB OTG" , After wiping , return back to the Home screen of TWRP , REBOOT > BOOTLOADER.
6] Boot twrp.img once again , like you did earlier , Now locate copypartitions.zip , rom.zip , twrp.zip and gapps.zip on your PC and move it to your river , Click on INSTALL > locate the files which you moved to your river ; possibly in /sdcard/ <here>.
7] [FLASHING]
i] First, flash copypartitions.zip , After flashing > Home Screen of TWRP > REBOOT > BOOTLOADER.
ii] Boot twrp.img once again , INSTALL > Now flash rom.zip along with twrp.zip , you can select multiple zips. > Home Screen of TWRP > REBOOT > RECOVERY.
iii] [SKIP THIS STEP IF YOU DONT WANT TO INSTALL GAPPS] ; Once you're into TWRP , INSTALL > gapps.zip , if it's done > Home screen of TWRP > REBOOT > BOOTLOADER.
8] We're Almost done! [IF YOU'RE A GAPPLESS GUY , I SUPPOSE YOU ARE IN TWRP RECOVERY , BOOT INTO BOOTLOADER!] Open Command Prompt on your PC and type fastboot -w , then just power your device OFF , disconnect the cable , manually power it ON , you've successfully installed a custom rom.
9] Once you're booted into the rom , insert your Sim Card(s) , and the phone will prompt which sim to use for data.
Just wanted to say thanks and that following this worked perfectly after I hit errors at the recovery boot stage of the official LineageOS guide.