Related
I was using my nexus s on Rogers network, and I thought, that since Fido is basically the same company as Rogers and Nexus S is an unlocked phone, my nexus s should have no problem working on Fido's network, and all I have to do is changing the SIM card.
The truth turned out to be, my nexus s, with a Fido SIM card inside, is ROAMing on Rogers network! I cannot see any carrier but Rogers if I go into the "network search" menu! Even if I checked the "only use 2g network" option!
I live in Montreal and I should have perfect Fido reception. My guess is that my nexus s may be secretly locked to Rogers network, and no matter what SIM card I put in it always, and only, finds Rogers network and connects to it, making the service become roaming if i use SIM card from other local carrier.
Is there any nexus s using Fido's network properly in Canada? or specifically in Montreal area?
Has anyone found a problem like this when doing a network switch?
it will work only as Voice
data will be EDGE only
Its currently asw 1700 / "t-mobile" only' therefore wind or mobilicity will get 3G.
Rogers Fido Bell & Telus use HSPA 850 1900 will not.
Is your phone *really* roaming on Rogers?
Fido is owned by Rogers, and as far as I know, they share the same network.
It could be that your Nexus S is just not displaying the network name "FIDO" and is displaying Rogers instead.
Wind Mobile, for instance, displays their network number on the Nexus S, but if you put the same chip on a Blackberry it will either show "Wind Home" or "Wind Away".
fishfuse said:
Is your phone *really* roaming on Rogers?
Fido is owned by Rogers, and as far as I know, they share the same network.
It could be that your Nexus S is just not displaying the network name "FIDO" and is displaying Rogers instead.
Wind Mobile, for instance, displays their network number on the Nexus S, but if you put the same chip on a Blackberry it will either show "Wind Home" or "Wind Away".
Click to expand...
Click to collapse
Yes. My Nexus S works fine with rogers. If I switch to a Fiso SIM card, it literally ROAMs on rogers network with a little "R" on top of the signal bar and ONLY finds rogers network in the "wireless" menu.
This is so weird.
Boszman said:
Its currently asw 1700 / "t-mobile" only' therefore wind or mobilicity will get 3G.
Rogers Fido Bell & Telus use HSPA 850 1900 will not.
Click to expand...
Click to collapse
It finds Rogers network and connects to it in EDGE. Even Fido and rogers use the same network/frequency/towers, it just can't see any network but Rogers.
Are your phones working well with Fido?
thllxb said:
If I switch to a Fiso SIM card, it literally ROAMs on rogers network with a little "R" on top of the signal bar and ONLY finds rogers network in the "wireless" menu.
This is so weird.
Click to expand...
Click to collapse
it doesn't matter, it still is on FIDO
i had an old Treo phones that did the exact same thing, because FIDO is not considered a real network in Canada as it's owned by ROGERS, so most of the time they get grouped together
but if you see their tower ID, you'll see they are on the correct tower
but it is a very tedious process to do that
regardless you will not get billed roaming as fido=rogers=fido=rogers=one company with 2 faces
My friend and I are both on Fido. We have older basic phones. I am on a basic plan. He is on older CityFido plan. Neither of us have data plan, voice only. His phone shows Rogers. Mine shows Fido (perhaps due to my SIM).
When I look at available networks in my phone, I only see Rogers. Fido no longer exists as a network. It is merely a cosmetic sub-brand of Rogers.
Fido and Rogers merged networks years ago; there is only one network: Rogers.
I hope this helps.
I am having an issue locking the phone to WCDMA. I live an area where the EDGE signal is stronger and it constantly drops 3G. After rooting the phone, I locked it into WCDMA and it would stick all the time, even dropping all signal when I moved into an area with only GSM coverage. However, somewhere along the line, I've lost the abillity to lock it in. I have tried going into the Mobile Networks settings and selecting WCDMA Only and also doing the *#*#4636#*#* and neither one will lock it into WCDMA. Anyone else having this issue or know of a workaround for this?
If ur in a edge based area where 3g is minimal,then setting to wcdma is the worst way to go. Wcdma will lock u into 3g/4g signals ONLY! So if your in edge area only,wcdma will not give u data or signal due to the fact the phone is searching for 3g/4g signals only. And GSM or cdma is a different ball park. Set to wcdma preferred and let it pick up what it can. If a 3g or "4g" signal is avaliable,it will automatically detect it and connect.
Sent from my HTC Inspire 4G using XDA App
mattmiller said:
If ur in a edge based area where 3g is minimal,then setting to wcdma is the worst way to go. Wcdma will lock u into 3g/4g signals ONLY! So if your in edge area only,wcdma will not give u data or signal due to the fact the phone is searching for 3g/4g signals only. And GSM or cdma is a different ball park. Set to wcdma preferred and let it pick up what it can. If a 3g or "4g" signal is avaliable,it will automatically detect it and connect.
Sent from my HTC Inspire 4G using XDA App
Click to expand...
Click to collapse
Its not that I don't have 3G in my area, its just that it only gives me 3 bars as opposed to EDGE which will give me full signal. When it's set on wcdma preferred, it will connect to 3G and after a few minutes switch over to EDGE. With my Captivate and the Inspire when I first got it and before I rooted it, I was able to lock it into only 3G. Somehow after flashing basically every rom in this forum, I can't get that setting to stick anymore.
Ok then flash the ruu of the rooted stock inspire. It is a pd98img.zip u can load and flash via bootloader. It will stay s-off and will flash updated radio and patches. Get your data fixed and GPS and then flash a rom afterwards. Attn1 has it posted in the development.
Sent from my HTC Inspire 4G using XDA App
Rob_Wing said:
Its not that I don't have 3G in my area, its just that it only gives me 3 bars as opposed to EDGE which will give me full signal. When it's set on wcdma preferred, it will connect to 3G and after a few minutes switch over to EDGE. With my Captivate and the Inspire when I first got it and before I rooted it, I was able to lock it into only 3G. Somehow after flashing basically every rom in this forum, I can't get that setting to stick anymore.
Click to expand...
Click to collapse
Same issue here, I called AT&T and they said it's because the cell tower closest to my office is old and supports Edge only so my phone keeps attaching to that tower even though there are other towers in range (that will give me 3 bars of 3G) which are newer.
With the stock rom, even going into the testing menu and setting "WCDMA only", it kept me on the Edge network. I rooted and flashed a custom ROM (Android Revolution) and at first it was great. At the office I could force "WCDMA only" at my desk, when I went into the middle of the building or whatever I would just have no signal (which I was ok with).
Now with the newer versions of the ROM I could no longer force "WCDMA only"... And the OP basically ignores my questions when I ask. Something that worked fine, I flashed a new version of the ROM and it stopped working...doesn't take a genius to figure out it's probably something he changed in his ROM... Not to sound unappreciative of the developers here...they do great work. Just frustrating... >_<
Hello,
So i've got this nicely unlocked, shiny, G2x. (Running MIUI right now, please don't judge me) Anyways, I'm in Morocco, and am trying to use Maroc Telecom (IAM) which has 3g data (their site even claims HSPA+) and these are the frequencys they use:
GSM 900 / GSM 1800 / UMTS 2100
And copy pasted from the T-Mobile website, the G2x uses:
Quad band GSM (850/900/1800/1900 MHz), Dual band UMTS (1700/2100 MHZ Bands 1 & 4)
To me that looks compatible. Trouble is, i'm getting no data whatsoever, not even 2g, in an area that I know should have at least 3g. I've signed up for the plan correctly, I'm sure of that. And my G2x automatically picked up the APN settings when I first turned it on (and I verified that they are correct) but still not a hint of internet access. This is driving me crazy!! any hints would be greatly appreciated.
Just guessing, but does it think you're roaming. Maybe try enabling data roaming to see if it recognizes the data then.
fiffer1 said:
Just guessing, but does it think you're roaming. Maybe try enabling data roaming to see if it recognizes the data then.
Click to expand...
Click to collapse
It wouldn't be roaming if he bought a sim for that system as he says. Probably APN has a typo or not selected. Have to push radio button so it has a green dot to enable the APN. If that doesn't work then contact carrier to reset data on the account. I have had to do that in the past here in Thailand. Have you also tried turning the phone off and on, or doing airplane mode. Sometimes that is needed once.
Thanks for the responses!
Unfortunately, i've tried and double tried all those things, except getting the carrier to reset the data plan. I'll do that next. Now I just have to get through a bunch of menus in French & Arabic
Are you running Market Enabler. It can screw you up royally if you change sim and it was set to fake at boot. I had that on a Nexus One and had to factory reset the phone to get data working again when I changed sim.
Thanks for the advice. I don't think i'm faking my sim - unless that's something that comes with CM07 and I just don't know about it. Also I tried it on stock before flashing with no different result, so i'm pretty sure that's not it. Went to the office of Maroc Telecom, who replaced my sim (but still no luck) and an INWI sim which i'd previously been able to get 2g coverage on now gives me nothing. It is the weirdest thing and I feel stuck. Has anyone actually gotten a g2x to work on any other network?? is there some sort of Tmobile lock which is preventing me because i'm not using a tmobile sim? (And i'm not talking about the phone being 'locked', obviously i've gotten it unlocked, and can make calls just fine, and did have that short spell of 2g data on INWI) Anyways, i'm about ready to throw this very expensive phone out the window, because what is a smartphone without data?? Thanks anyways for your advice.
same, problem.
How can I solve it?
Maybe try to use other broadband?
I use my G2X in Thailand on TOT3G with no problems. They run 3G on Band 1 (2100/1900). Figure out what band it is. There about fifteen different 3G bands in use. Most people don't realize it but 3G radios use two frequency spectrums at the same time. There is an uplink and downlink. For example 2100 Band 1 uses 2100Mhz downlink and a 1900Mhz uplink. Band 4 is 1700Mhz uplink and 2100Mhz downlink. So the 3G radio in the G2X also transmits on 1900Mhz. But the 1900 Band 2 uses 1800Mhz as an uplink, which the 3G radio in the G2X doesn't support. Most companies that say they are on 2100Mhz are referring to Band 1. If they are running Band 1 the G2X definitely supports it. If you have sim unlocked the phone there is nothing preventing you from getting 3G reception on any carrier in the world.
Download "Network" (https://market.android.com/details?id=de.mangelow.network&feature=search_result) from the Android Market and run it. Scroll down to where it says what type of connection you want and make sure "WCDMA preferred" is selected. If the phone somehow got set to "2G only" you will never get 3G reception until you change it. That happened to me once on a Nexus One and took me a while to figure it out.
CM7 and some other custom roms are known to be having connectivity issues. I suggest you flash back to stock and make sure your apn is correct. If your apn is wrong in any way, the connection will be refused by the cell system.
answer to problem with 3G
engadget[dot]com/2011/04/27/t-mobile-g2x-lacks-quadband-hspa-shatters-dreams/
So, I have working 2G, and 3G(only data, calls are not working)
Rom: WeaponG2x.
Have you tried hard reset (press and hold vol^ and power) till it restarts..
Sent from my LG-P999 using xda premium
MisfitX said:
Have you tried hard reset (press and hold vol^ and power) till it restarts..
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
For the what?
Hi there,
I have a Samsung Galaxy S2 LTE (signed with Rogers) and I'm trying to figure out how to disable 4G on my phone and only use 3G. I've looked through some threads talking about changing the "Network mode" in the "Mobile network settings," but I haven't had any luck with that.
GSM/HSPA/LTE (Auto Mode)
GSM/HSPA (Auto Mode)
GSM Only
HSPA Only
Right now, I'm using GSM/HSPA (Auto Mode) but it still says I'm connected to 4G in the status bar. In GSM Only, it connects to the edge network (E) and in HSPA only, it will connect to 4G network. Anyone have any ideas of how to connect using 3G?
Also, I've noticed in my APN settings, I'm using the "ltemobile.apn" (the only APN setting I have listed). I don't have a LTE plan, so should this be the APN that I should be using? Since I'm not on a LTE plan, would I be charged more for using the "ltemobile.apn" APN?
Thanks
4g is 3g/HSPA. If you were able to get LTE, the 4g icon would change (as long as you aren't on a ROM that doesn't have LTE icons)
Is there any way to turn off 4G/LTE completely and just use 3G to conserve battery life? I don't own a Skyrocket but my friend does and has horrible batt life.
On home screen press menu button and go to phone settings
Wireless and Network > Mobile Networks > Network Mode
Here you can tell it to use edge/3g/lte or edge/3g or just edge or just 3g
Hopfully that is not my ROM that allows me to choose that. Using Sky Ice Cream Sandwich rom
It depends on the ROM. Stock won't do it and a number of custom roms I've used don't do it either, but I have seen some that appear to allow for that functionality. Do some research and find one you like.
"4G" is 3g (well hspa+) which is twice as fast as what 3g speeds were originally at (see 4, iphone) its more of a marketing thing. There won't be a 3g icon showing up with these roms. best bet is to choose gsm/hspa then it won't be looking for LTE.
bluecrush69 said:
Hi there,
I have a Samsung Galaxy S2 LTE (signed with Rogers) and I'm trying to figure out how to disable 4G on my phone and only use 3G. I've looked through some threads talking about changing the "Network mode" in the "Mobile network settings," but I haven't had any luck with that.
GSM/HSPA/LTE (Auto Mode)
GSM/HSPA (Auto Mode)
GSM Only
HSPA Only
Right now, I'm using GSM/HSPA (Auto Mode) but it still says I'm connected to 4G in the status bar. In GSM Only, it connects to the edge network (E) and in HSPA only, it will connect to 4G network. Anyone have any ideas of how to connect using 3G?
Also, I've noticed in my APN settings, I'm using the "ltemobile.apn" (the only APN setting I have listed). I don't have a LTE plan, so should this be the APN that I should be using? Since I'm not on a LTE plan, would I be charged more for using the "ltemobile.apn" APN?
Thanks
Click to expand...
Click to collapse
HSPA is actually 3G. AT&T and Tmobile were calling it 4G because they had to come up with some marketing scheme to compete with WiMaxx and LTE. SO in short, AUTO HSPA... is effectively disabling your 4G.
Herro! first time poster, long time lurker! i searched around, and couldn't really find a similar problem.
I got an HTC one S from Fido, unlocked it, and i've been trying to use it on Bell. I tried several different APN's until one finally worked...but only EDGE speeds! It's also draining my battery extremely quickly. also, when i put my bell sim card inside, preferred network mode changes to WCDMA instead of HSPA (like on the fido sim).
why is this happening? i was told a fido phone would work on bell with no problem. why no 4g speeds?
thank you and i appreciate the responses in advance
HSPA uses WCDMA, so that makes no sense... Under preferred network you should have WCDMA only, 2G only, or WCDMA preferred if I recall correctly as I'm not on stock HTC rom atm so can't check. Are you getting an "E" signal indicator or are you just getting a slow connection? What does it say under About phone>Status>Mobile Network Type?
Set it to Auto mode in the network settings.
frdd said:
HSPA uses WCDMA, so that makes no sense... Under preferred network you should have WCDMA only, 2G only, or WCDMA preferred if I recall correctly as I'm not on stock HTC rom atm so can't check. Are you getting an "E" signal indicator or are you just getting a slow connection? What does it say under About phone>Status>Mobile Network Type?
Click to expand...
Click to collapse
yeah, all the tech support i've talked to said it makes no sense either . i get the same outcome whether i put it on WCDMA only or GSM/WCDMA auto. when i do the speed test, it always comes out under 1 mb/s. it actually has the 4G symbol up, but the speed isn't there.
mhmm, it switches between UMTS and HSDPA.
If you have UMTS and HSPDA under status its working, and those are also what connection you're really on. If you always have a 4g icon on status bar it seems like your carrier has modded the software like T-Mobile USA does so it always shows 4g no matter what's up in the real world.
Maybe you're not in a good location and that's why you get slow data. Also I have no idea how Canadian carriers work but I'd guess if you're connected to a 850 MHz cell you'll get worse speeds than on a 1700/1900 one. Don't you guys have insane data caps everywhere, perhaps you hit yours when speedtesting?
did you try a new sim from bell