Sorry if this is not the right forum, I'm new here and I do not know how to work. But I must help. Sorry for my english, I'm not that good and it's not my native language.
I have a galaxy S2 plus room I tried to download it (it has no root). I have done according to all kinds of videos. After I clicked start it hangs on SetupConnection few minutes (maybe 15 minutes, I have not checked), then it writes me All threads completed then it is not working. What am I supposed to do
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWM_4.2.2_ODIN-s2vep.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
android: 4.1.2
samsung galaxy S2 plus
I9105P
help please
Try a different usb cable
Sent from my SM-G9250 using Tapatalk
Related
Hi all, I desperately need help to fix my s5839i. The phone was rooted sometime ago. Recently the phone was unable to charge. I saw recommendation in the forum to flash the firmware. I connected the phone and download the firmware. When I flash using ODIN, i got the following message:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5839iBUMG1_S5839iVDIMG1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> S5839iBUMG1_S5839iVDIMG1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> S5839iBUMG1_S5839iVDIMG1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> S5839iBUMG1_S5839iVDIMG1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I left the phone all day on the charger but still the phone cannot charge. Need some experts advise please. The connection to ODIN keep on disconnecting as the battery was very low and the phone was unable to be charge. This phone is less than 6 months old
mizandude said:
Hi all, I desperately need help to fix my s5839i. The phone was rooted sometime ago. Recently the phone was unable to charge. I saw recommendation in the forum to flash the firmware. I connected the phone and download the firmware. When I flash using ODIN, i got the following message:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5839iBUMG1_S5839iVDIMG1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> S5839iBUMG1_S5839iVDIMG1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> S5839iBUMG1_S5839iVDIMG1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> S5839iBUMG1_S5839iVDIMG1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I left the phone all day on the charger but still the phone cannot charge. Need some experts advise please. The connection to ODIN keep on disconnecting as the battery was very low and the phone was unable to be charge. This phone is less than 6 months old
Click to expand...
Click to collapse
Intermittently I can see the battery logo with a very low battery on the screen when connecting to the computer USB. The COM to the ODIN intermittently connected and removed:
<ID:0/009> Added!!
<ID:0/009> Removed!!
<ID:0/009> Added!!
<ID:0/009> Removed!!
I am attempting to update my Note 3 to the Official Poland Kit Kat upgrade. I am have the T-Mobile SM-900t with X-Note 5.1 Rom. I have installed the MD5 file and Odin 3.09. I attempted to install the file and got failure.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
I have auto reboot, f. reset time and phone bootloader update all checked. Luckily my phone is not bricked and still running under the old Rom. Any help that you could send my way would be great. Thanks
Please help me with this, my phone gets stuck on at&t logo so i can only go into download mode and every time i flash cwm recovery or stock rom using Odin, it says complete (write) operation failed. So what happened was that i had cm 12.1 lollipop and i did not want it anymore and so i got an at&t stock firmware from galaxys3.com and i flashed it with cwm recovery then i ticked wipe data, dalvik cache then it flashed and now its bricked this happens on odin every time
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747MVLUFOB1_I747MOYBFOB1_I747MVLUFOB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
NaweedHabib said:
Please help me with this, my phone gets stuck on at&t logo so i can only go into download mode and every time i flash cwm recovery or stock rom using Odin, it says complete (write) operation failed. So what happened was that i had cm 12.1 lollipop and i did not want it anymore and so i got an at&t stock firmware from galaxys3.com and i flashed it with cwm recovery then i ticked wipe data, dalvik cache then it flashed and now its bricked this happens on odin every time
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747MVLUFOB1_I747MOYBFOB1_I747MVLUFOB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. Here is where you should ask your questions:
AT&T Galaxy S III Q&A, Help & Troubleshooting
Here is the homepage for your device model:
Samsung Galaxy S III i747
The expert advice you need can be found there.
Good luck!
My phone is in a bootloop, it goes to a blue screen with the android bot saying "Installing system update" then says no command, then turns black and goes back to "installing system update"
This happened when i tried to install TWRP on my phone but im sure i messed up something, im running an AT&T snapdragon sm-G955U, flashing stock firmware seems to do nothing and outputs this error in odin
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf.lz4
<ID:0/004> Complete(Write) operation failed.
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any recommendations ? i'm pretty noobish to rooting so I do not know what I did wrong.
RevivalOW said:
My phone is in a bootloop, it goes to a blue screen with the android bot saying "Installing system update" then says no command, then turns black and goes back to "installing system update"
This happened when i tried to install TWRP on my phone but im sure i messed up something, im running an AT&T snapdragon sm-G955U, flashing stock firmware seems to do nothing and outputs this error in odin
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf.lz4
<ID:0/004> Complete(Write) operation failed.
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any recommendations ? i'm pretty noobish to rooting so I do not know what I did wrong.
Click to expand...
Click to collapse
Which files exactly where you flashing?
Sorry for the post revive, but I'm facing the same problem again. If you're still willing to help, PM me and I'll give you the link.
same problem. 5th bootloader can't find stock firmware for it.
I wish I could offer some help, but I've given up on the Samsung Galaxy S8+. All of the reputable developers have moved on to better phones. I wish I could say it was good while it lasted, but I ****ing hate this phone and can't wait to get rid of it.
Hello everyone,
I am trying to install the original Samsung rom back on my phone.
Samsung SM-930F.
I've downloaded the lastest Samsung rom and added the all the files as suggested in a tutorial here on XDA.
However, the sceen keeps showing the following.
<ID:0/006> Home Binary Download
<ID:0/006> Total Binary size: 3906 M
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 3950 M
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Dylan25111 said:
Hello everyone,
I am trying to install the original Samsung rom back on my phone.
Samsung SM-930F.
I've downloaded the lastest Samsung rom and added the all the files as suggested in a tutorial here on XDA.
However, the sceen keeps showing the following.
<ID:0/006> Home Binary Download
<ID:0/006> Total Binary size: 3906 M
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 3950 M
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Try some of these suggestions
https://forum.xda-developers.com/ga...ning-to-ota-oreo-beta-3-t3920885/post79593856
spawnlives said:
Try some of these suggestions
https://forum.xda-developers.com/ga...ning-to-ota-oreo-beta-3-t3920885/post79593856
Click to expand...
Click to collapse
Thank's it seems to be working
Hi I'm trying to use odin to update my so active.. I really love this phone but following all instructions gets held up at set up connection.. is there someone who can just do this for me I'm exhausted. I don't want to give this phone up. . Please help. .I've tried different cables not such. .thanx
Jazzygirl08 said:
Hi I'm trying to use odin to update my so active.. I really love this phone but following all instructions gets held up at set up connection.. is there someone who can just do this for me I'm exhausted. I don't want to give this phone up. . Please help. .I've tried different cables not such. .thanx
Click to expand...
Click to collapse
Do you have the Samsung drivers installed? Do you have adb activated in the developer settings?