I am attempting to update my Note 3 to the Official Poland Kit Kat upgrade. I am have the T-Mobile SM-900t with X-Note 5.1 Rom. I have installed the MD5 file and Odin 3.09. I attempted to install the file and got failure.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
I have auto reboot, f. reset time and phone bootloader update all checked. Luckily my phone is not bricked and still running under the old Rom. Any help that you could send my way would be great. Thanks
Related
Please help me with this, my phone gets stuck on at&t logo so i can only go into download mode and every time i flash cwm recovery or stock rom using Odin, it says complete (write) operation failed. So what happened was that i had cm 12.1 lollipop and i did not want it anymore and so i got an at&t stock firmware from galaxys3.com and i flashed it with cwm recovery then i ticked wipe data, dalvik cache then it flashed and now its bricked this happens on odin every time
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747MVLUFOB1_I747MOYBFOB1_I747MVLUFOB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
NaweedHabib said:
Please help me with this, my phone gets stuck on at&t logo so i can only go into download mode and every time i flash cwm recovery or stock rom using Odin, it says complete (write) operation failed. So what happened was that i had cm 12.1 lollipop and i did not want it anymore and so i got an at&t stock firmware from galaxys3.com and i flashed it with cwm recovery then i ticked wipe data, dalvik cache then it flashed and now its bricked this happens on odin every time
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747MVLUFOB1_I747MOYBFOB1_I747MVLUFOB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. Here is where you should ask your questions:
AT&T Galaxy S III Q&A, Help & Troubleshooting
Here is the homepage for your device model:
Samsung Galaxy S III i747
The expert advice you need can be found there.
Good luck!
Hi guys,
I need help. My phone suddenly turned off and when I tried to switch it on, I got bootloop. When I enter twrp and choose wipe, my phone reboots. I installed a new version of twrp, but it doesn`t help. I tried to install custom roms, but around 60-70% reboot. Does anybody know how to fix?
Galaxy S7, G930FD
LineageOS 14.1
TWRP 3.1.1.0
thanks in advance
Flash stock
*Detection* said:
Flash stock
Click to expand...
Click to collapse
I got fail
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 4071 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> __XmitData_Write
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
That happen to me, only fixed by flashing just AP file on Odin, I was on Oreo stock and tried to root and this happen.
j0shyc0re said:
That happen to me, only fixed by flashing just AP file on Odin, I was on Oreo stock and tried to root and this happen.
Click to expand...
Click to collapse
Ok,
I got fail, but the process of installing the firmware is still on. How can I stop it?
Just disconnect the USB cable.
My phone is in a bootloop, it goes to a blue screen with the android bot saying "Installing system update" then says no command, then turns black and goes back to "installing system update"
This happened when i tried to install TWRP on my phone but im sure i messed up something, im running an AT&T snapdragon sm-G955U, flashing stock firmware seems to do nothing and outputs this error in odin
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf.lz4
<ID:0/004> Complete(Write) operation failed.
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any recommendations ? i'm pretty noobish to rooting so I do not know what I did wrong.
RevivalOW said:
My phone is in a bootloop, it goes to a blue screen with the android bot saying "Installing system update" then says no command, then turns black and goes back to "installing system update"
This happened when i tried to install TWRP on my phone but im sure i messed up something, im running an AT&T snapdragon sm-G955U, flashing stock firmware seems to do nothing and outputs this error in odin
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf.lz4
<ID:0/004> Complete(Write) operation failed.
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any recommendations ? i'm pretty noobish to rooting so I do not know what I did wrong.
Click to expand...
Click to collapse
Which files exactly where you flashing?
Sorry for the post revive, but I'm facing the same problem again. If you're still willing to help, PM me and I'll give you the link.
same problem. 5th bootloader can't find stock firmware for it.
I wish I could offer some help, but I've given up on the Samsung Galaxy S8+. All of the reputable developers have moved on to better phones. I wish I could say it was good while it lasted, but I ****ing hate this phone and can't wait to get rid of it.
First I got stuck in the "custom binary blocked FRP lock". and when i try to flash stock firmware, odin fails with some sboot.bin error...please help me someone
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
assassin410 said:
First I got stuck in the "custom binary blocked FRP lock". and when i try to flash stock firmware, odin fails with some sboot.bin error...please help me someone
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Stuck at the same issue, the problem probably is that the bootloader is the newest V3 version, which is not Downgradeable for now.
RapsodyR55 said:
Stuck at the same issue, the problem probably is that the bootloader is the newest V3 version, which is not Downgradeable for now.
Click to expand...
Click to collapse
I got the same problem, so do we have to wait for a new Odin Version?
I am also stuck at this situation. Completed the rooting process on my S8 950FD after installing some custom apps, it force reboot and is stuck in a boot loop with (only official release binaries are allowed to be flashed). I then try to flash it back to stock firmware but was successful, and had the same log messages as thread starter.
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I use:
Odin3 v3.13.1
Samsung firmware: Galaxy S8 SM-G950FD 8.0.0 June 15, 18 Singapore (XSP) G950FXXU2CREH
Stuck here as well!
Hi,
I was in the situation as I described earlier in the noob thread https://forum.xda-developers.com/t/help-thread-ask-any-question-noob-friendly.2257421/post-85728889
Meanwhile I kept reading a trying to make my phone start again. So I tried to to flash my phone to stock to fix it.
As I wrote in the above post I have a Galaxy S7 edge (SM-G935F) so I downloaded the latest from the Netherlands (where the phone is from) and Vodafone (my original provider) from Sammobile:
I tried to use this one: https://www.sammobile.com/samsung/g...e/SM-G935F/VDF/download/G935FXXU8ETI2/607496/
I think that's correct right?
However the following happened:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> param.bin
<ID:0/004> modem_debug.bin
<ID:0/004> Home Binary Download
<ID:0/004> Total Binary size: 4319 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So it doesn't seem to get passed boot.img?
Afterwards the behaviour was different and its asking me to try emergency recovery with Samsung Switch (which does not even list my phone). I can still get in download mode in the phone though and try flashing again but I only get the same results (or an outright reject if I try slightly older firmwares).
Is there anything I can do now or is my phone broken?
Do you have solve the problem? because I have the same problem