Database Info

Trying 2 Install Firmware after accidentally dropping phone in water

Ok so Im Useing New firmware 2 Install The Firmware Stock but now it shows me this error (OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!

Try to use newest Odin 3.12.7 and newest Samsung USB Drivers. Also download one more time right latest firmware for your model (the best way to get it is SamFirm). HERE you found all and some info. Try like that.
EDIT:
I didn't saw your another thread HERE: https://forum.xda-developers.com/galaxy-s6/help/plz-help-trying-to-reinstall-stock-t3671080/
If there was connection with water can be hardware issue like broken motherboard etc... So...

Thank U
rifek4 said:
Try to use newest Odin 3.12.7 and newest Samsung USB Drivers. Also download one more time right latest firmware for your model (the best way to get it is SamFirm).
EDIT:
I didn't saw your another thread HERE: https://forum.xda-developers.com/galaxy-s6/help/plz-help-trying-to-reinstall-stock-t3671080/
If there was connection with water can be hardware issue like broken motherboard etc... So...
Click to expand...
Click to collapse
Yea I Might Just Buy A Galaxy S8 But Thank U

Bootlooping phone s8+ AT&T cant flash stock firmware

My phone is in a bootloop, it goes to a blue screen with the android bot saying "Installing system update" then says no command, then turns black and goes back to "installing system update"
This happened when i tried to install TWRP on my phone but im sure i messed up something, im running an AT&T snapdragon sm-G955U, flashing stock firmware seems to do nothing and outputs this error in odin
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf.lz4
<ID:0/004> Complete(Write) operation failed.
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any recommendations ? i'm pretty noobish to rooting so I do not know what I did wrong.

RevivalOW said:
My phone is in a bootloop, it goes to a blue screen with the android bot saying "Installing system update" then says no command, then turns black and goes back to "installing system update"
This happened when i tried to install TWRP on my phone but im sure i messed up something, im running an AT&T snapdragon sm-G955U, flashing stock firmware seems to do nothing and outputs this error in odin
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf.lz4
<ID:0/004> Complete(Write) operation failed.
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any recommendations ? i'm pretty noobish to rooting so I do not know what I did wrong.
Click to expand...
Click to collapse
Which files exactly where you flashing?

Sorry for the post revive, but I'm facing the same problem again. If you're still willing to help, PM me and I'll give you the link.

same problem. 5th bootloader can't find stock firmware for it.

I wish I could offer some help, but I've given up on the Samsung Galaxy S8+. All of the reputable developers have moved on to better phones. I wish I could say it was good while it lasted, but I ****ing hate this phone and can't wait to get rid of it.

Help Installed Lineage on Samsung S7 not edge cant restor back to stock OS

Device info : Samsung s7 (not Edge) SM-G930W8 build G930W8VLU3CRE3 Canadian version for Rogers.
So I recently installed Lineage 15 Android 8.0 and rooted. Its super glitchy and I want to restore to a Stock Android 8.0.
I downloaded stock firmware, then open Oden and reboot my phone into download. I locate the BL, AP, CP, CSC home and click start in Oden.
Odin immediately says RESET, then PASS! My phone reboots and instead of loading a stock 8.0 OS it loads Lineage!!! I cant get past this. Can some one help?
Here is the odin log.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> sboot.bin.lz4
<ID:0/004> param.bin.lz4
<ID:0/004> cm.bin.lz4
<ID:0/004> boot.img.lz4
<ID:0/004> recovery.img.lz4
<ID:0/004> system.img.lz4
<ID:0/004> modem.bin.lz4
<ID:0/004> modem_debug.bin.lz4
<ID:0/004> cache.img.lz4
<ID:0/004> hidden.img.lz4
<ID:0/004> Home Binary Download
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)

I fixed the problem. I was using the wrong version of Odin. I was able to install android 8.0 Oreo using Odin verison 3.13.1. I then got stuck on the boot screen during my first boot. Using the Voumue up + down + home + power butts I did a forced reboot. Then Using vomume up + home + Power I went into recover my and did the following. Wipe data / factory reset Wipe cache partition. Reboot the phone and it now works. I thought I would post this info incase some one runs into this problem.

I messed up rooting s8+ now can't flash back to normal

Hi so found a guide on magisk on how to root s8+, but the version of twrp they used didnt accept touch input, so had to reboot the phone. I then flashed the latest twrp for that phone from the twrp website, but then when I went to wipe the data from twrp it said it couldnt mount some folders.
Anyway, so figured I should just wipe and start again. Downloaded latest stock firmware, loaded up the 4 files in Odin. if I use home_csc, the flashing process finishes in like 5 seconds saying successful, it should take longer since it needs to flash ap etc too but it doesn't seem to do that (but odin still says successful).
If I flash the normal CSC file instead, odin get stuck on "set partition"
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> cache.img.lz4
and just stays here
Can someone help?
EDIT: i think it eventually failed
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!

Try to boot into recovery mode and factory reset again, and then instead of downloading the latest firmware, try to find a older firmware for you device and see if you can flash that

ignore this post please

Nameless Foe said:
Try to boot into recovery mode and factory reset again, and then instead of downloading the latest firmware, try to find a older firmware for you device and see if you can flash that
Click to expand...
Click to collapse
I am downloading the firmwares before the date of purchase as I don't believe I updated since then, god I wish I didn't rush into things

hassanhassan said:
I am downloading the firmwares before the date of purchase as I don't believe I updated since then, god I wish I didn't rush into things
Click to expand...
Click to collapse
I'm sorry this happened to you. I hope finding an older firmware will allow you to boot back into your device

Nameless Foe said:
I'm sorry this happened to you. I hope finding an older firmware will allow you to boot back into your device
Click to expand...
Click to collapse
thanks, will check it out and let you know, it was a backup phone that I wanted to play around with so I'm not that put out.

hassanhassan said:
thanks, will check it out and let you know, it was a backup phone that I wanted to play around with so I'm not that put out.
Click to expand...
Click to collapse
Oh well thats good lol. Good thing its not your daily driver

I tried again with older roms and have the same issue, if I use home csc it flashes in two seconds and the phone bootloops.
if I use the normal csc it gets stuck on set partition and here
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin.lz4
EDIT: I tried different vrsions of odin, 13.1 worked

hassanhassan said:
I tried again with older roms and have the same issue, if I use home csc it flashes in two seconds and the phone bootloops.
if I use the normal csc it gets stuck on set partition and here
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin.lz4
EDIT: I tried different vrsions of odin, 13.1 worked
Click to expand...
Click to collapse
Glad to hear you got it figured out? When you used older Odin, where you able to use latest firmware ?

Trying to fix S7 Edge (SM-G935F) with stock OS (never rooted) stuck in boot loop

Hi,
I was in the situation as I described earlier in the noob thread https://forum.xda-developers.com/t/help-thread-ask-any-question-noob-friendly.2257421/post-85728889
Meanwhile I kept reading a trying to make my phone start again. So I tried to to flash my phone to stock to fix it.
As I wrote in the above post I have a Galaxy S7 edge (SM-G935F) so I downloaded the latest from the Netherlands (where the phone is from) and Vodafone (my original provider) from Sammobile:
I tried to use this one: https://www.sammobile.com/samsung/g...e/SM-G935F/VDF/download/G935FXXU8ETI2/607496/
I think that's correct right?
However the following happened:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> param.bin
<ID:0/004> modem_debug.bin
<ID:0/004> Home Binary Download
<ID:0/004> Total Binary size: 4319 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So it doesn't seem to get passed boot.img?
Afterwards the behaviour was different and its asking me to try emergency recovery with Samsung Switch (which does not even list my phone). I can still get in download mode in the phone though and try flashing again but I only get the same results (or an outright reject if I try slightly older firmwares).
Is there anything I can do now or is my phone broken?

Do you have solve the problem? because I have the same problem