Please help me with this, my phone gets stuck on at&t logo so i can only go into download mode and every time i flash cwm recovery or stock rom using Odin, it says complete (write) operation failed. So what happened was that i had cm 12.1 lollipop and i did not want it anymore and so i got an at&t stock firmware from galaxys3.com and i flashed it with cwm recovery then i ticked wipe data, dalvik cache then it flashed and now its bricked this happens on odin every time
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747MVLUFOB1_I747MOYBFOB1_I747MVLUFOB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
NaweedHabib said:
Please help me with this, my phone gets stuck on at&t logo so i can only go into download mode and every time i flash cwm recovery or stock rom using Odin, it says complete (write) operation failed. So what happened was that i had cm 12.1 lollipop and i did not want it anymore and so i got an at&t stock firmware from galaxys3.com and i flashed it with cwm recovery then i ticked wipe data, dalvik cache then it flashed and now its bricked this happens on odin every time
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747MVLUFOB1_I747MOYBFOB1_I747MVLUFOB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. Here is where you should ask your questions:
AT&T Galaxy S III Q&A, Help & Troubleshooting
Here is the homepage for your device model:
Samsung Galaxy S III i747
The expert advice you need can be found there.
Good luck!
Related
UPDATE: I switched USB ports and it seems that it's now flashing...standby
UPDATE 2: All fixed.
Unhide for original post:
I think I need a bit of help. So last night busybox updated to the latest version (from the app). Now today when I go to start up my phone it starts up, but stays on the Galaxy S3 logo. I can boot into CWM recovery and download mode just fine. So I was attempting to flash (via Odin) back to stock so I could start fresh. I was following the advice from here: http://forum.xda-developers.com/showthread.php?t=1840030. And the bootchains flashed fine, but the root66.tar keeps failing.
This is the log I get:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_VZW_I535VRBMA2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What am I doing wrong?
Also I was running a older build of SynergyROM if that's of any use.
I am attempting to update my Note 3 to the Official Poland Kit Kat upgrade. I am have the T-Mobile SM-900t with X-Note 5.1 Rom. I have installed the MD5 file and Odin 3.09. I attempted to install the file and got failure.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
I have auto reboot, f. reset time and phone bootloader update all checked. Luckily my phone is not bricked and still running under the old Rom. Any help that you could send my way would be great. Thanks
Hello
Here is a brief history of my SGH-I337. I need help to debug.
1. Screen cracked. Got it fixed by Samsung, where it was reset to Factory default.
2. Try to install Lollipop through Kies3, when the phone got stuck in EFR and cannot boot up.
3. Tried everything that freakboy13 posted -- did not fix the issue.
4. downloaded firmware from Sammobile.com; below is the Odin error log.
-- begin error log----
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
-- end of error log------
Do I need to check other boxes to overcome this write fail? Appreciate any suggestions.
thanks
Hi, thank you for using XDA Assist. Odin is failing because you can't flash the mdl firmware on your device. You need to flash nb1, which is not available on sammobile. See this excellent guide by gutt13, http://forum.xda-developers.com/showthread.php?t=2616221. If you have further questions ask in that thread. They are the experts on your device.
Thread closed.
So my tablet went off for like 4 days. When I powered it I got this error "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." I cannot enter download mode to repair it on odin. Wen through Sammobile site and got twoROMS which are not working. I keep getting this error on Odin.
FAIL!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5100XWBLE4_P5100OJVBLF1_P5100XXLE4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help me.
Hi there
You'd be best served asking for help from the experts who own your device, here:
Galaxy Tab 2 Q&A, Help & Troubleshooting
Good luck
I followed a tutorial because its looked the best i had seen for a while and it had most the files included it was off this forum in the developers section so i booted my s5300 into download mode started up odin 3 and begin placing the files in the correct paths. Once in the correct paths i pressed start and here is what i get a fail? can anyone explain why this might be happening i think the old owner who gave me the brick said he had partioned it so he could use a custom rom ive booted into recovery mode and i see is it cyanmobile amd clockworkmod but i think the clockwork dont have any files? and something else anyway here is the code of the odin result any help would be very helpful has ive been up all night trying to repair it to no avail i dont know how much more i can take hehe?:laugh:
EDIT: might be worth mentioning it does still have a custom rom on the partition i can successfully install it boot when i reboot it just says onkey 7s reset?
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5300_XXLF5.tar.md5 is valid.
<OSM> MODEM_S5300_XXLF5.tar.md5 is valid.
<OSM> CSC_S5300_BTULF1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
pablo77777 said:
I followed a tutorial because its looked the best i had seen for a while and it had most the files included it was off this forum in the developers section so i booted my s5300 into download mode started up odin 3 and begin placing the files in the correct paths. Once in the correct paths i pressed start and here is what i get a fail? can anyone explain why this might be happening i think the old owner who gave me the brick said he had partioned it so he could use a custom rom ive booted into recovery mode and i see is it cyanmobile amd clockworkmod but i think the clockwork dont have any files? and something else anyway here is the code of the odin result any help would be very helpful has ive been up all night trying to repair it to no avail i dont know how much more i can take hehe?:laugh:
EDIT: might be worth mentioning it does still have a custom rom on the partition i can successfully install it boot when i reboot it just says onkey 7s reset?
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5300_XXLF5.tar.md5 is valid.
<OSM> MODEM_S5300_XXLF5.tar.md5 is valid.
<OSM> CSC_S5300_BTULF1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Have you tried this:
http://forum.xda-developers.com/showthread.php?t=2560314