So my tablet went off for like 4 days. When I powered it I got this error "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." I cannot enter download mode to repair it on odin. Wen through Sammobile site and got twoROMS which are not working. I keep getting this error on Odin.
FAIL!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5100XWBLE4_P5100OJVBLF1_P5100XXLE4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help me.
Hi there
You'd be best served asking for help from the experts who own your device, here:
Galaxy Tab 2 Q&A, Help & Troubleshooting
Good luck
Related
I made a mistake upgrading my galaxy note with odin!!!!
I got the message ...
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Kies does not work, not recognizes my phone
When I try to go into recovery mode volume up + power + home, it goes to the same message.
I go into downloading mode, volume down +power +home
And Odin recognizes the device but a got this fail
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000_APBOOT_N7000ZSLPF_CL558430_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
I try with different tar to get back but did not work, If someone can help me I will be very thankful.
Tars used:
N7000XXKKA_N7000BUKK1_N7000SFRKK1_HOME.tar
N7000_CODE_N7000ZSLPF_CL558430_REV02_user_low_ship.tar
Rooted_Stock_Odex_N7000XXLC1.tar
N7000XXLS2.tar
Hello everybody !
I REALLY NEED SOME HELP HERE !
I tried to downgrade my S4 i9505 from official 5.0.1 to the official 4.4.2 ..
I tried the same way i did with the 5.0.1 (from 4.4.2 to 5.0.1 )but this time didn t work anymore
Odin says :
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNH7_I9505YFGGNI1_I9505XXUGNH7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
PLEASE HELP
If u had this problem and solve it, please help me buddies !! (((
Hi, thank you for using XDA Assist. If it worked before it'll work again. Try different USB ports, the ones in the back of your PC, and cables. Odin can be finicky.
Thread closed.
Hello
Here is a brief history of my SGH-I337. I need help to debug.
1. Screen cracked. Got it fixed by Samsung, where it was reset to Factory default.
2. Try to install Lollipop through Kies3, when the phone got stuck in EFR and cannot boot up.
3. Tried everything that freakboy13 posted -- did not fix the issue.
4. downloaded firmware from Sammobile.com; below is the Odin error log.
-- begin error log----
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
-- end of error log------
Do I need to check other boxes to overcome this write fail? Appreciate any suggestions.
thanks
Hi, thank you for using XDA Assist. Odin is failing because you can't flash the mdl firmware on your device. You need to flash nb1, which is not available on sammobile. See this excellent guide by gutt13, http://forum.xda-developers.com/showthread.php?t=2616221. If you have further questions ask in that thread. They are the experts on your device.
Thread closed.
Please help me with this, my phone gets stuck on at&t logo so i can only go into download mode and every time i flash cwm recovery or stock rom using Odin, it says complete (write) operation failed. So what happened was that i had cm 12.1 lollipop and i did not want it anymore and so i got an at&t stock firmware from galaxys3.com and i flashed it with cwm recovery then i ticked wipe data, dalvik cache then it flashed and now its bricked this happens on odin every time
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747MVLUFOB1_I747MOYBFOB1_I747MVLUFOB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
NaweedHabib said:
Please help me with this, my phone gets stuck on at&t logo so i can only go into download mode and every time i flash cwm recovery or stock rom using Odin, it says complete (write) operation failed. So what happened was that i had cm 12.1 lollipop and i did not want it anymore and so i got an at&t stock firmware from galaxys3.com and i flashed it with cwm recovery then i ticked wipe data, dalvik cache then it flashed and now its bricked this happens on odin every time
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747MVLUFOB1_I747MOYBFOB1_I747MVLUFOB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. Here is where you should ask your questions:
AT&T Galaxy S III Q&A, Help & Troubleshooting
Here is the homepage for your device model:
Samsung Galaxy S III i747
The expert advice you need can be found there.
Good luck!
Sorry if this is not the right forum, I'm new here and I do not know how to work. But I must help. Sorry for my english, I'm not that good and it's not my native language.
I have a galaxy S2 plus room I tried to download it (it has no root). I have done according to all kinds of videos. After I clicked start it hangs on SetupConnection few minutes (maybe 15 minutes, I have not checked), then it writes me All threads completed then it is not working. What am I supposed to do
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWM_4.2.2_ODIN-s2vep.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
android: 4.1.2
samsung galaxy S2 plus
I9105P
help please
Try a different usb cable
Sent from my SM-G9250 using Tapatalk