[Q] s5839i cannot charged and fail updating the firmware using ODIN - General Questions and Answers

Hi all, I desperately need help to fix my s5839i. The phone was rooted sometime ago. Recently the phone was unable to charge. I saw recommendation in the forum to flash the firmware. I connected the phone and download the firmware. When I flash using ODIN, i got the following message:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5839iBUMG1_S5839iVDIMG1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> S5839iBUMG1_S5839iVDIMG1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> S5839iBUMG1_S5839iVDIMG1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> S5839iBUMG1_S5839iVDIMG1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I left the phone all day on the charger but still the phone cannot charge. Need some experts advise please. The connection to ODIN keep on disconnecting as the battery was very low and the phone was unable to be charge. This phone is less than 6 months old

mizandude said:
Hi all, I desperately need help to fix my s5839i. The phone was rooted sometime ago. Recently the phone was unable to charge. I saw recommendation in the forum to flash the firmware. I connected the phone and download the firmware. When I flash using ODIN, i got the following message:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5839iBUMG1_S5839iVDIMG1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> S5839iBUMG1_S5839iVDIMG1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> S5839iBUMG1_S5839iVDIMG1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> S5839iBUMG1_S5839iVDIMG1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I left the phone all day on the charger but still the phone cannot charge. Need some experts advise please. The connection to ODIN keep on disconnecting as the battery was very low and the phone was unable to be charge. This phone is less than 6 months old
Click to expand...
Click to collapse
Intermittently I can see the battery logo with a very low battery on the screen when connecting to the computer USB. The COM to the ODIN intermittently connected and removed:
<ID:0/009> Added!!
<ID:0/009> Removed!!
<ID:0/009> Added!!
<ID:0/009> Removed!!

Related

[Q] Battery related!!!!

Hey guys. I have one problem with my S2 plus NFC. When disconecting the phone from charging, the battery the icon for battery says its still charging and the same happens when its 100%...it still says its charging and i still have the indicator on top left corner that shows battery 100 % charged. All theese happen when i plug off the charger. To repair it i must restart phone. I flashed frimware with Kies but the same problem. Odin 3.09 doesnt do anything...not working ....
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9105PXXUBNB1_I9105PCOABNC1_I9105PXXUBNC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1
I also have the sleep of death....and the same happens when i use USB cable....when unpluged the notification is still there!!!!
Cooetzee said:
Hey guys. I have one problem with my S2 plus NFC. When disconecting the phone from charging, the battery the icon for battery says its still charging and the same happens when its 100%...it still says its charging and i still have the indicator on top left corner that shows battery 100 % charged. All theese happen when i plug off the charger. To repair it i must restart phone. I flashed frimware with Kies but the same problem. Odin 3.09 doesnt do anything...not working ....
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9105PXXUBNB1_I9105PCOABNC1_I9105PXXUBNC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1
I also have the sleep of death....and the same happens when i use USB cable....when unpluged the notification is still there!!!!
Click to expand...
Click to collapse
torn of kies to work with odin

[Completed] Hard Bricked Samsung Galaxy S7 Edge

I have a Verizon branded Samsung Galaxy S7 Edge. I rooted the phone. Later, I was trying to make some adjustments to the radio antennas and the phone hard bricked. I cannot factory reset or anything like that. I believe the bootloader is locked because I cannot load anything from the SD card or any other options.
I have tried re-flashing to the stock ROM using QPST Configuration, but it fails every time saying that the "Write failed" (as in no write access).
Part of the issue was that my phone would not be recognized in the COM port of the device manager; this was the problem that was not allowing me to make the radio adjustments. When I tried to get around this, that is when the phone bricked.
Are there any methods to re-flash a Verizon branded phone that is bricked and has this write access issue?
Thank you!
shrouwoods said:
I have a Verizon branded Samsung Galaxy S7 Edge. I rooted the phone. Later, I was trying to make some adjustments to the radio antennas and the phone hard bricked. I cannot factory reset or anything like that. I believe the bootloader is locked because I cannot load anything from the SD card or any other options.
I have tried re-flashing to the stock ROM using QPST Configuration, but it fails every time saying that the "Write failed" (as in no write access).
Part of the issue was that my phone would not be recognized in the COM port of the device manager; this was the problem that was not allowing me to make the radio adjustments. When I tried to get around this, that is when the phone bricked.
Are there any methods to re-flash a Verizon branded phone that is bricked and has this write access issue?
Thank you!
Click to expand...
Click to collapse
Greetings and welcome to assist. If your pc does not recognise your phone I fear you may be stuck, you can try kies emergency firmware recovery it may detect your phone
Good Luck
Sawdoctor
More Info Regarding Failed ROM Flash
When usinng Odin to try to flash the device with a stock ROM, I get the following errors.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
shrouwoods said:
When usinng Odin to try to flash the device with a stock ROM, I get the following errors.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Have you tried kies emergency firmware recovery yet?
Sent from my SM-N930F using Tapatalk

[Completed] S7 Stuck on Smart Switch software error screen after ODIN Flash

Tried rooting my SM-G930T and figured it wasn't for me. Went to unroot, but flashing it with incorrect firmware led to a "FAIL" on odin. My phones stuck on the "an error has occurred while updating the device software use the emergency recovery function in the Smart Switch PC software" screen, but using the smart switch software doesn't work. It says my device isn't eligible for device initialization.
I've tried different firmwares with different build dates but nothing had seemed to be working, and now i'm stuck here. Any advice?
Hi !
Sorry to hear about your pain , I always repeat , even though it sounds annoying , to properly check the device variant and firmware , especially for Samsung devices , before doing anything
I have looked around a bit but I couldn`t find a proper unbrick tutorial
Have a look at this discussion here and also post your issue , there are some good workers around there .
Good luck !
roshux said:
Tried rooting my SM-G930T and figured it wasn't for me. Went to unroot, but flashing it with incorrect firmware led to a "FAIL" on odin. My phones stuck on the "an error has occurred while updating the device software use the emergency recovery function in the Smart Switch PC software" screen, but using the smart switch software doesn't work. It says my device isn't eligible for device initialization.
I've tried different firmwares with different build dates but nothing had seemed to be working, and now i'm stuck here. Any advice?
Click to expand...
Click to collapse
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> xbl.elf
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
roshux said:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> xbl.elf
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
If you still have download mode which you have then try kies/smartswitch emergency firmware recovery and this will return your phone to complete stock
Regards
Sawdoctor

Bootlooping phone s8+ AT&T cant flash stock firmware

My phone is in a bootloop, it goes to a blue screen with the android bot saying "Installing system update" then says no command, then turns black and goes back to "installing system update"
This happened when i tried to install TWRP on my phone but im sure i messed up something, im running an AT&T snapdragon sm-G955U, flashing stock firmware seems to do nothing and outputs this error in odin
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf.lz4
<ID:0/004> Complete(Write) operation failed.
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any recommendations ? i'm pretty noobish to rooting so I do not know what I did wrong.
RevivalOW said:
My phone is in a bootloop, it goes to a blue screen with the android bot saying "Installing system update" then says no command, then turns black and goes back to "installing system update"
This happened when i tried to install TWRP on my phone but im sure i messed up something, im running an AT&T snapdragon sm-G955U, flashing stock firmware seems to do nothing and outputs this error in odin
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf.lz4
<ID:0/004> Complete(Write) operation failed.
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any recommendations ? i'm pretty noobish to rooting so I do not know what I did wrong.
Click to expand...
Click to collapse
Which files exactly where you flashing?
Sorry for the post revive, but I'm facing the same problem again. If you're still willing to help, PM me and I'll give you the link.
same problem. 5th bootloader can't find stock firmware for it.
I wish I could offer some help, but I've given up on the Samsung Galaxy S8+. All of the reputable developers have moved on to better phones. I wish I could say it was good while it lasted, but I ****ing hate this phone and can't wait to get rid of it.

[HELP] S7, Odin stuck at setup connection

Hello everyone,
I am trying to install the original Samsung rom back on my phone.
Samsung SM-930F.
I've downloaded the lastest Samsung rom and added the all the files as suggested in a tutorial here on XDA.
However, the sceen keeps showing the following.
<ID:0/006> Home Binary Download
<ID:0/006> Total Binary size: 3906 M
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 3950 M
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Dylan25111 said:
Hello everyone,
I am trying to install the original Samsung rom back on my phone.
Samsung SM-930F.
I've downloaded the lastest Samsung rom and added the all the files as suggested in a tutorial here on XDA.
However, the sceen keeps showing the following.
<ID:0/006> Home Binary Download
<ID:0/006> Total Binary size: 3906 M
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 3950 M
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Try some of these suggestions
https://forum.xda-developers.com/ga...ning-to-ota-oreo-beta-3-t3920885/post79593856
spawnlives said:
Try some of these suggestions
https://forum.xda-developers.com/ga...ning-to-ota-oreo-beta-3-t3920885/post79593856
Click to expand...
Click to collapse
Thank's it seems to be working
Hi I'm trying to use odin to update my so active.. I really love this phone but following all instructions gets held up at set up connection.. is there someone who can just do this for me I'm exhausted. I don't want to give this phone up. . Please help. .I've tried different cables not such. .thanx
Jazzygirl08 said:
Hi I'm trying to use odin to update my so active.. I really love this phone but following all instructions gets held up at set up connection.. is there someone who can just do this for me I'm exhausted. I don't want to give this phone up. . Please help. .I've tried different cables not such. .thanx
Click to expand...
Click to collapse
Do you have the Samsung drivers installed? Do you have adb activated in the developer settings?

Categories

Resources