Hey guys. I have one problem with my S2 plus NFC. When disconecting the phone from charging, the battery the icon for battery says its still charging and the same happens when its 100%...it still says its charging and i still have the indicator on top left corner that shows battery 100 % charged. All theese happen when i plug off the charger. To repair it i must restart phone. I flashed frimware with Kies but the same problem. Odin 3.09 doesnt do anything...not working ....
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9105PXXUBNB1_I9105PCOABNC1_I9105PXXUBNC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1
I also have the sleep of death....and the same happens when i use USB cable....when unpluged the notification is still there!!!!
Cooetzee said:
Hey guys. I have one problem with my S2 plus NFC. When disconecting the phone from charging, the battery the icon for battery says its still charging and the same happens when its 100%...it still says its charging and i still have the indicator on top left corner that shows battery 100 % charged. All theese happen when i plug off the charger. To repair it i must restart phone. I flashed frimware with Kies but the same problem. Odin 3.09 doesnt do anything...not working ....
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9105PXXUBNB1_I9105PCOABNC1_I9105PXXUBNC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1
I also have the sleep of death....and the same happens when i use USB cable....when unpluged the notification is still there!!!!
Click to expand...
Click to collapse
torn of kies to work with odin
Related
I made a mistake upgrading my galaxy note with odin!!!!
I got the message ...
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Kies does not work, not recognizes my phone
When I try to go into recovery mode volume up + power + home, it goes to the same message.
I go into downloading mode, volume down +power +home
And Odin recognizes the device but a got this fail
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000_APBOOT_N7000ZSLPF_CL558430_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
I try with different tar to get back but did not work, If someone can help me I will be very thankful.
Tars used:
N7000XXKKA_N7000BUKK1_N7000SFRKK1_HOME.tar
N7000_CODE_N7000ZSLPF_CL558430_REV02_user_low_ship.tar
Rooted_Stock_Odex_N7000XXLC1.tar
N7000XXLS2.tar
Hi all, I desperately need help to fix my s5839i. The phone was rooted sometime ago. Recently the phone was unable to charge. I saw recommendation in the forum to flash the firmware. I connected the phone and download the firmware. When I flash using ODIN, i got the following message:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5839iBUMG1_S5839iVDIMG1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> S5839iBUMG1_S5839iVDIMG1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> S5839iBUMG1_S5839iVDIMG1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> S5839iBUMG1_S5839iVDIMG1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I left the phone all day on the charger but still the phone cannot charge. Need some experts advise please. The connection to ODIN keep on disconnecting as the battery was very low and the phone was unable to be charge. This phone is less than 6 months old
mizandude said:
Hi all, I desperately need help to fix my s5839i. The phone was rooted sometime ago. Recently the phone was unable to charge. I saw recommendation in the forum to flash the firmware. I connected the phone and download the firmware. When I flash using ODIN, i got the following message:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5839iBUMG1_S5839iVDIMG1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> S5839iBUMG1_S5839iVDIMG1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> S5839iBUMG1_S5839iVDIMG1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> S5839iBUMG1_S5839iVDIMG1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I left the phone all day on the charger but still the phone cannot charge. Need some experts advise please. The connection to ODIN keep on disconnecting as the battery was very low and the phone was unable to be charge. This phone is less than 6 months old
Click to expand...
Click to collapse
Intermittently I can see the battery logo with a very low battery on the screen when connecting to the computer USB. The COM to the ODIN intermittently connected and removed:
<ID:0/009> Added!!
<ID:0/009> Removed!!
<ID:0/009> Added!!
<ID:0/009> Removed!!
I am attempting to update my Note 3 to the Official Poland Kit Kat upgrade. I am have the T-Mobile SM-900t with X-Note 5.1 Rom. I have installed the MD5 file and Odin 3.09. I attempted to install the file and got failure.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
I have auto reboot, f. reset time and phone bootloader update all checked. Luckily my phone is not bricked and still running under the old Rom. Any help that you could send my way would be great. Thanks
My phone is in a bootloop, it goes to a blue screen with the android bot saying "Installing system update" then says no command, then turns black and goes back to "installing system update"
This happened when i tried to install TWRP on my phone but im sure i messed up something, im running an AT&T snapdragon sm-G955U, flashing stock firmware seems to do nothing and outputs this error in odin
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf.lz4
<ID:0/004> Complete(Write) operation failed.
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any recommendations ? i'm pretty noobish to rooting so I do not know what I did wrong.
RevivalOW said:
My phone is in a bootloop, it goes to a blue screen with the android bot saying "Installing system update" then says no command, then turns black and goes back to "installing system update"
This happened when i tried to install TWRP on my phone but im sure i messed up something, im running an AT&T snapdragon sm-G955U, flashing stock firmware seems to do nothing and outputs this error in odin
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf.lz4
<ID:0/004> Complete(Write) operation failed.
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any recommendations ? i'm pretty noobish to rooting so I do not know what I did wrong.
Click to expand...
Click to collapse
Which files exactly where you flashing?
Sorry for the post revive, but I'm facing the same problem again. If you're still willing to help, PM me and I'll give you the link.
same problem. 5th bootloader can't find stock firmware for it.
I wish I could offer some help, but I've given up on the Samsung Galaxy S8+. All of the reputable developers have moved on to better phones. I wish I could say it was good while it lasted, but I ****ing hate this phone and can't wait to get rid of it.
Hi. I install S7 Android 9 Custom Rom. Now I want back orginal stock rom. But I see Odin error. can someone help me. Thanks
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've solved the problem. Problem with the USB extension cable. I connected the usb cable directly to the motherboard. Problem solved