Related
Hello everybody. I have an almost new (3 weeks old) black nexus 5 16 gb. Everything was fine till today, when I heard, that the main ear speaker went very low on volume, when someone called me. It's the same on playing music in power amp or watching videos. I thing, it's the famous Google issue, that many people had in their phones.
Anyway, my phone is unlocked and rooted. Do I have here in Poland lock and unroot it back before I send it back to LG, or can I just send it? Do I get somehow a nexus 5 as a replacement first or not?
Thanks for help guys
Wysłane z mojego Nexus 5 przy użyciu Tapatalka
If you have bought it from the playstore, then you need to contact Google. Google doesn't care whether it's rooted or not. However, warranty under LG is a different matter... I would strongly suggest you to get back to stock before sending the device in!
- Sent from an IceCold Hammerhead!
Here you go, straight from LG(see attachment).
Go fully stock, reset the tamper flag and lock the bootloader!
- Sent from an IceCold Hammerhead!
I didn't bought it from play store :-\ so I have to stock it back. Good, that I don't have many customs apps
Do I get a replacement phone, when I put it to the service?
Wysłane z mojego Nexus 5 przy użyciu Tapatalka
roberto18 said:
I didn't bought it from play store :-\ so I have to stock it back. Good, that I don't have many customs apps
Do I get a replacement phone, when I put it to the service?
Wysłane z mojego Nexus 5 przy użyciu Tapatalka
Click to expand...
Click to collapse
Apart from apps and rom, make sure you have flashed the stock recovery, reset the tamper flag and locked the bootloader as well!
AFAIK, you don't get a replacement phone... However, policies differ from center to center.
BTW, are you sure the volume problem is indeed a hardware issue and not a software one? Why don't you try flashing the factory images and double check??
I just noticed, that I have a software issue rather than hardware. After a long restart phone, the sound is clear and loud. The voice goes now from one of the two speakers at the bottom of the phone, instead the ear speaker.
I will take some time and see, if it's happen again before factory reset.
Thanks for the help anyway guys
Wysłane z mojego Nexus 5 przy użyciu Tapatalka
roberto18 said:
I just noticed, that I have a software issue rather than hardware. After a long restart phone, the sound is clear and loud. The voice goes now from one of the two speakers at the bottom of the phone, instead the ear speaker.
I will take some time and see, if it's happen again before factory reset.
Thanks for the help anyway guys
Wysłane z mojego Nexus 5 przy użyciu Tapatalka
Click to expand...
Click to collapse
There is only one speaker at the bottom. The left one is the speaker and the right one is the mic.
Well I read on other thread that google places a hold of 350$ on your credit card and send you a new phone.
The hold is deleted when you give your old phone to the RMA
Any one got ot to work.. The lollipop have option to shiw notification panel by fingerprint senor BUT it do not work at least for me...
Sent from my HUAWEI MT7-TL10 using Tapatalk
Any solution? I have the same problem.
Enviado desde mi HUAWEI MT7-L09 mediante Tapatalk
khalid mgahed said:
Any one got ot to work.. The lollipop have option to shiw notification panel by fingerprint senor BUT it do not work at least for me...
Sent from my HUAWEI MT7-TL10 using Tapatalk
Click to expand...
Click to collapse
Where did you find that setting?
can you check your firmware number please?
I have this Option too but its not working i have B324 build
We all has the option BUT.. It do no thing
Sent from my HUAWEI MT7-TL10 using Tapatalk
If you used b300 to fix some bugs that's why you have that option. Won't work. On b324 clean install there is no such option.
Send from Mate 7 using tapatalk
Where you have this option on B324 I can't find
Wysłane z mojego HUAWEI MT7-L09 przy użyciu Tapatalka
As far as I understood it won't work on the HAM7 anyway, perhaps it's designed for Mate S hardware - but it's just my guess.
For me to accept a call or take a foto by fingerprint works, the gestures not.
You can find it under >Settings>Fingerprint-ID and it's not grayed out there.
sweetsmoke69 said:
As far as I understood it won't work on the HAM7 anyway, perhaps it's designed for Mate S hardware - but it's just my guess.
For me to accept a call or take a foto by fingerprint works, the gestures not.
You can find it under >Settings>Fingerprint-ID and it's not grayed out there.
Click to expand...
Click to collapse
I see the options too, but they aren't working. I upgraded to B324 from B313 (MT7-TL10), no reset.
Where can you see that option? I cant find it anywhere
Settings - Fingerprint ID
Raithlin said:
Settings - Fingerprint ID
Click to expand...
Click to collapse
I don't have that. Now I think that going LP was a bad idea. If I wait for OTA, will it be the same as the one posted on the site?
Sent from my HUAWEI MT7-TL10 using Tapatalk
with f print u can only answer call and take pictures or rec video .. no notification unfortunately.. those who has it in settings reset/restore your phone and it will disappear after..
Nope doesn't go away with reset.
Sent from my HUAWEI MT7-L09 using Tapatalk
XDADEVX said:
with f print u can only answer call and take pictures or rec video .. no notification unfortunately.. those who has it in settings reset/restore your phone and it will disappear after..
Click to expand...
Click to collapse
I've read that elsewhere as well. I think I may reset my phone this weekend - will report back if it does indeed disappear. Makes no difference though - it doesn't work either way.
Raithlin said:
I've read that elsewhere as well. I think I may reset my phone this weekend - will report back if it does indeed disappear. Makes no difference though - it doesn't work either way.
Click to expand...
Click to collapse
I dont know why u guys asking for finger print sencor notification...its not support for mate 7
First in beta version they send us thats version for test which is from Mate S (I guess) or any other device from huawei which support fp sencor,
Second, i m sure u guys install this official version directly from lp beta version which completely give u error or some kind of buggs...
read instruction in that download pakage, or i can say u can install from 120,125,138 which is the official kitkat release on huawei forum...pls dont complain anything about official version untill u cant install fresh one...the is the most fast, suitable and strongest without any error version i ever seen in andriod...even other brand cant seem fast and beautiful when i compare my mate 7 with them...so read command in all thread, get idea then start install....one thing i want to make sure there is not such kind of fp sencor for notification, it was only in beta they send us for test which for our device, our mate 7 hardware doesn't support fp sencor....
Enhance your calm, citizen. We're discussing it, is all. I didn't expect it to be here, knowing that it is dependent on the hardware.
Still gonna reset this weekend. Holding thumbs for the Mate 7 being listed for upgrade to Marshmallow...
I m always calm dude...just say few words which will help others...specially whose saying to downgrade from 324 by mean that version not stable...i just did clear that i m runny with everything fine...
i'm 100% sure that it's not a hardware problem, and I can explain why:
First you have to turn on the option in developer settings which will show where you touch the screen, then you go into the stock gallery app (or camera), and then you touch the fp sensor and see what happens. You will see how the marker will move through the screen without touching it. It doesn't only detect different fingerprints but also where you touch it. If you touch it on the left it will move right. I you touch it on the right it will move left, touch on top move down, touch in the upper left corner it will go diagonal to the lower right corner etc..
now if you think logical it should detect a swipe down movement easily, as it only needs to realize that you touched the top, the middle and the bottom. There may be problems to make it not detect unwanted swipes due to it not beeing that precise I guess but it shouldn't be that hard to fix it..
if they only released the source code for it then some modders could easily script something for us..
Hi guys, I bought Xiaomi mi4c one month ago and I noticed this problem on multi-touch, is it software or hardware problem? am I only who have this problem? can you check on your mi4c? https://www.youtube.com/watch?v=uPC7Z2ploxc
This does exists in all 3 xiaomi mi4c I have, in all developer roms I tested it.
When you press more than one finger the edge of touch is not working.
Στάλθηκε από το Mi-4c μου
I too have this problem while typing I thought it might be because of the tampered glass screen protector on my phone but now you people are saying so it will be a issue definitely
Talha7866 said:
I too have this problem while typing I thought it might be because of the tampered glass screen protector on my phone but now you people are saying so it will be a issue definitely
Click to expand...
Click to collapse
What is the issue? Let me check. I didnt understand the OP
If you have more than one finger on the screen, the far edge of the touch around the screen does not work at all until you have only one finger on the screen
Στάλθηκε από το Mi-4c μου
The OP created a thread here and asked the same question in many other threads (including the thread about MM update for Mi4c), what's the point?
Sent using xda premium
I do not know what is the point of op to ask the same question over multiple threads, but this is the one I saw while trying to find a solution, and this is where I posted.
Don't mark the thread as bad, the problem does exist in both my mi4c, and I have try all available roms, officials, developers, cyanogen and others I could find.
The point is not why the op did something, but why the thing we have does what it does.
Στάλθηκε από το Mi-4c μου
Works fine for me. It registers and tracks all five fingers at once.
Please read what the problem is.
It does register more than one finger, but the edge of screen does not get any readings if you have more than one finger pressed
Στάλθηκε από το Mi-4c μου
Like the touch area gets smaller if you have more than one finger on the screen.
Cannot explain that in a better way, sorry.
GnFgr said:
Please read what the problem is.
It does register more than one finger, but the edge of screen does not get any readings if you have more than one finger pressed
Στάλθηκε από το Mi-4c μου
Like the touch area gets smaller if you have more than one finger on the screen.
Cannot explain that in a better way, sorry.
Click to expand...
Click to collapse
Now i see the issue.
The left side is made with one Finger, the right side made with two.
The working area is [39, 1039] on X axis and [59, 1859] on Y axis in my case.
5.12.10 EU weekly, edge tap disabled and tempered glass screen protector applied.
Inviato dal mio Mi-4c utilizzando Tapatalk
Try it with the "pointer location" on developer settings. My screen works perfectly with 10 fingers at the same time, no cropped lines. I´m using stable rom from xiaomi.eu
prototovsky said:
Try it with the "pointer location" on developer settings. My screen works perfectly with 10 fingers at the same time, no cropped lines. I´m using stable rom from xiaomi.eu
Click to expand...
Click to collapse
Its not about the cropped lines. Look at my Screenshot, with one Finger (left) you can go to the edges of the display and your Finger is recognized. With 2 fingers (right) you go to the edges, but its not recognized
prototovsky said:
Try it with the "pointer location" on developer settings. My screen works perfectly with 10 fingers at the same time, no cropped lines. I´m using stable rom from xiaomi.eu
Click to expand...
Click to collapse
....
Same problem here but guys is it realy an issue? If I not read this post I never notice this problem.
For me it is a huge issue since I always type with two hands and usually I am misstouching somewhere.
Also in some games it is a no go.
Στάλθηκε από το Mi-4c μου
Anyone checked this on CM 13?
Altair77 said:
Same problem here but guys is it realy an issue? If I not read this post I never notice this problem.
Click to expand...
Click to collapse
Not for me, but the guy who posted this "problem" said he cant play some game because of that. So, yeah, for some people its an issue
Same issue here, I hope it is not a hardware issue
Same problem Here. I have 2 Mi4C both have this bug.
Wysłane z mojego Mi-4c przy użyciu Tapatalka
Use your notch as a battery bar in this live wallpaper.
The pro version has customization options. Check it out!
Trial - Play store link
Pro version- customizable - Play store link
I don't need a promo code but this might be a bit tricky to get the sweet spot for the G7. This is width 800 and height 125.
Actually the screenshot isn't going to help much since it doesn't properly illustrate how it jives with the notch
markbencze said:
I don't need a promo code but this might be a bit tricky to get the sweet spot for the G7. This is width 800 and height 125.
Actually the screenshot isn't going to help much since it doesn't properly illustrate how it jives with the notch
Click to expand...
Click to collapse
Thanks! But if at all possible, please take a photo and post because like you said, a screenshot doesn't really help.
Here ya go
I used 620×105. It looks good. Definitely different way to use the notch area. But when I am in any app, it doesn't work, but I guess that is because it is just a live wallpaper.
S8ntsHaz3 said:
Here ya go
Click to expand...
Click to collapse
Looks great! I have sent you a code. Thank you so much.
I tried at 600x110 to make the bar smaller. Battery was at 97%. Only thing is, it would appear that this only works with the one supplied wallpaper and doesn't seem to work with other wallpapers. Also, I figured that I could then turn off the numerical battery display to gain some room up top. Thing is, even with the number display turned off, nothing from the top left moves over to the top right, so I'm not really gaining anything in screen real estate, but losing some where the colored bar is, and I'm stuck with only one wallpaper that can be used.
With pro version You can choose different wallpaper, just shape is not identical with LG g7, I already have asked developer to add this feature, also choose percentage on which different colors appear will be great
Wysłane z mojego LM-G710 przy użyciu Tapatalka
lukjod said:
With pro version You can choose different wallpaper, just shape is not identical with LG g7, I already have asked developer to add this feature, also choose percentage on which different colors appear will be greatView attachment 4602255
Wysłane z mojego LM-G710 przy użyciu Tapatalka
Click to expand...
Click to collapse
The latest update of pro version let's you change shape in the settings. Please try that and let me know.
Any codes left?
You guys still need more testers?
It looks good with the 600x110 settings on the trial version.
andygold said:
Any codes left?
Click to expand...
Click to collapse
I actually have 1 left. Send me a picture with the trial version installed and it's yours.
qu3becker said:
You guys still need more testers?
It looks good with the 600x110 settings on the trial version.
Click to expand...
Click to collapse
Yes, please post a photo with the wallpaper applied.
kumarsid7 said:
I actually have 1 left. Send me a picture with the trial version installed and it's yours.
Click to expand...
Click to collapse
I did, post #7 above. ?
I do like how the color changes when charging, just wish we could change the wallpaper.
Any codes left?
Pro version cost 0,5 EUR, it Can change wallpaper.
Wysłane z mojego LM-G710 przy użyciu Tapatalka
I have the pro version it's working great on my G7 Thinq spring variant... Thanks for the app.
Well that picture turned out bad. The screen shot enlarged the battery bar size, either way I have a perfect thin white line around my notch it's great
Hey,
I keep having connectivity issues on my updated OnePlus 6 Pie. After upgrade I have lost all devices connectivity, had to redo with some degree of difficulty. My car sees the phone, but I cannot route audio to the car. Spotify played over Bluetooth, but no sound in car. Tried with an iPod 7th gen and works perfect.
Has anyone experienced issues in Pie?
Thanks.
rokeno said:
Hey,
I keep having connectivity issues on my updated OnePlus 6 Pie. After upgrade I have lost all devices connectivity, had to redo with some degree of difficulty. My car sees the phone, but I cannot route audio to the car. Spotify played over Bluetooth, but no sound in car. Tried with an iPod 7th gen and works perfect.
Has anyone experienced issues in Pie?
Thanks.
Click to expand...
Click to collapse
Are you using stereo module? If so just uninstall it and problem solved, had the same issue too.
Guys... Did you notice significant audio quality drop after updating to Pie? My V4A profiles sounds terrible after update... Bass often fades back, and I can't hear it anymore. Did they mess something with Bluetooth codecs/drivers? Can you help me getting better sound quality, like I had before? In worst case I'll downgrade to Oreo...
Wysłane z mojego ONEPLUS A6003 przy użyciu Tapatalka
danielofata said:
Are you using stereo module? If so just uninstall it and problem solved, had the same issue too.
Click to expand...
Click to collapse
Lol. I do have it. I will give it a try!
danielofata said:
Are you using stereo module? If so just uninstall it and problem solved, had the same issue too.
Click to expand...
Click to collapse
Ok. That was great!!!thanks mate. Works!!