Hello everybody. I have an almost new (3 weeks old) black nexus 5 16 gb. Everything was fine till today, when I heard, that the main ear speaker went very low on volume, when someone called me. It's the same on playing music in power amp or watching videos. I thing, it's the famous Google issue, that many people had in their phones.
Anyway, my phone is unlocked and rooted. Do I have here in Poland lock and unroot it back before I send it back to LG, or can I just send it? Do I get somehow a nexus 5 as a replacement first or not?
Thanks for help guys
Wysłane z mojego Nexus 5 przy użyciu Tapatalka
If you have bought it from the playstore, then you need to contact Google. Google doesn't care whether it's rooted or not. However, warranty under LG is a different matter... I would strongly suggest you to get back to stock before sending the device in!
- Sent from an IceCold Hammerhead!
Here you go, straight from LG(see attachment).
Go fully stock, reset the tamper flag and lock the bootloader!
- Sent from an IceCold Hammerhead!
I didn't bought it from play store :-\ so I have to stock it back. Good, that I don't have many customs apps
Do I get a replacement phone, when I put it to the service?
Wysłane z mojego Nexus 5 przy użyciu Tapatalka
roberto18 said:
I didn't bought it from play store :-\ so I have to stock it back. Good, that I don't have many customs apps
Do I get a replacement phone, when I put it to the service?
Wysłane z mojego Nexus 5 przy użyciu Tapatalka
Click to expand...
Click to collapse
Apart from apps and rom, make sure you have flashed the stock recovery, reset the tamper flag and locked the bootloader as well!
AFAIK, you don't get a replacement phone... However, policies differ from center to center.
BTW, are you sure the volume problem is indeed a hardware issue and not a software one? Why don't you try flashing the factory images and double check??
I just noticed, that I have a software issue rather than hardware. After a long restart phone, the sound is clear and loud. The voice goes now from one of the two speakers at the bottom of the phone, instead the ear speaker.
I will take some time and see, if it's happen again before factory reset.
Thanks for the help anyway guys
Wysłane z mojego Nexus 5 przy użyciu Tapatalka
roberto18 said:
I just noticed, that I have a software issue rather than hardware. After a long restart phone, the sound is clear and loud. The voice goes now from one of the two speakers at the bottom of the phone, instead the ear speaker.
I will take some time and see, if it's happen again before factory reset.
Thanks for the help anyway guys
Wysłane z mojego Nexus 5 przy użyciu Tapatalka
Click to expand...
Click to collapse
There is only one speaker at the bottom. The left one is the speaker and the right one is the mic.
Well I read on other thread that google places a hold of 350$ on your credit card and send you a new phone.
The hold is deleted when you give your old phone to the RMA
Related
Hi guys, I bought Xiaomi mi4c one month ago and I noticed this problem on multi-touch, is it software or hardware problem? am I only who have this problem? can you check on your mi4c? https://www.youtube.com/watch?v=uPC7Z2ploxc
This does exists in all 3 xiaomi mi4c I have, in all developer roms I tested it.
When you press more than one finger the edge of touch is not working.
Στάλθηκε από το Mi-4c μου
I too have this problem while typing I thought it might be because of the tampered glass screen protector on my phone but now you people are saying so it will be a issue definitely
Talha7866 said:
I too have this problem while typing I thought it might be because of the tampered glass screen protector on my phone but now you people are saying so it will be a issue definitely
Click to expand...
Click to collapse
What is the issue? Let me check. I didnt understand the OP
If you have more than one finger on the screen, the far edge of the touch around the screen does not work at all until you have only one finger on the screen
Στάλθηκε από το Mi-4c μου
The OP created a thread here and asked the same question in many other threads (including the thread about MM update for Mi4c), what's the point?
Sent using xda premium
I do not know what is the point of op to ask the same question over multiple threads, but this is the one I saw while trying to find a solution, and this is where I posted.
Don't mark the thread as bad, the problem does exist in both my mi4c, and I have try all available roms, officials, developers, cyanogen and others I could find.
The point is not why the op did something, but why the thing we have does what it does.
Στάλθηκε από το Mi-4c μου
Works fine for me. It registers and tracks all five fingers at once.
Please read what the problem is.
It does register more than one finger, but the edge of screen does not get any readings if you have more than one finger pressed
Στάλθηκε από το Mi-4c μου
Like the touch area gets smaller if you have more than one finger on the screen.
Cannot explain that in a better way, sorry.
GnFgr said:
Please read what the problem is.
It does register more than one finger, but the edge of screen does not get any readings if you have more than one finger pressed
Στάλθηκε από το Mi-4c μου
Like the touch area gets smaller if you have more than one finger on the screen.
Cannot explain that in a better way, sorry.
Click to expand...
Click to collapse
Now i see the issue.
The left side is made with one Finger, the right side made with two.
The working area is [39, 1039] on X axis and [59, 1859] on Y axis in my case.
5.12.10 EU weekly, edge tap disabled and tempered glass screen protector applied.
Inviato dal mio Mi-4c utilizzando Tapatalk
Try it with the "pointer location" on developer settings. My screen works perfectly with 10 fingers at the same time, no cropped lines. I´m using stable rom from xiaomi.eu
prototovsky said:
Try it with the "pointer location" on developer settings. My screen works perfectly with 10 fingers at the same time, no cropped lines. I´m using stable rom from xiaomi.eu
Click to expand...
Click to collapse
Its not about the cropped lines. Look at my Screenshot, with one Finger (left) you can go to the edges of the display and your Finger is recognized. With 2 fingers (right) you go to the edges, but its not recognized
prototovsky said:
Try it with the "pointer location" on developer settings. My screen works perfectly with 10 fingers at the same time, no cropped lines. I´m using stable rom from xiaomi.eu
Click to expand...
Click to collapse
....
Same problem here but guys is it realy an issue? If I not read this post I never notice this problem.
For me it is a huge issue since I always type with two hands and usually I am misstouching somewhere.
Also in some games it is a no go.
Στάλθηκε από το Mi-4c μου
Anyone checked this on CM 13?
Altair77 said:
Same problem here but guys is it realy an issue? If I not read this post I never notice this problem.
Click to expand...
Click to collapse
Not for me, but the guy who posted this "problem" said he cant play some game because of that. So, yeah, for some people its an issue
Same issue here, I hope it is not a hardware issue
Same problem Here. I have 2 Mi4C both have this bug.
Wysłane z mojego Mi-4c przy użyciu Tapatalka
So my problem is that when my phone has been standing idle for a longer period of time and then somebody calls, the touchscreen doesn't work. I cannot slide the green phone icon and I cannot answer the call. All buttons work, I can switch the screen off, the bottom keys vibrate when I press them, but I still can't answer the call. I had the problem with the Chinese Dev ROM and also with sMiui. Any ideas how to fix it?
Uninstall Facebook Messenger
Wysłane z mojego Mi-4c przy użyciu Tapatalka
After some testing and using the phone, that solution really works! Big big thanks!
krist2an said:
After some testing and using the phone, that solution really works! Big big thanks!
Click to expand...
Click to collapse
i will try this. Did it fix?
Hello all, and sorry for the stupid Question.
So which one is the newest version Number for the 4G (Sim) Model (Int/EU version) ?
I am on: NXH19T
I´m on NXH19T too. Most updates are based on PlayServices....
NXH20B on mine
mcdull said:
NXH20B on mine
Click to expand...
Click to collapse
4g or BT?
Hes from Hong Kong so i bet he has the China-Firmware installed, i asked only about EU/Int Firmwares.
garzacorporations said:
4g or BT?
Click to expand...
Click to collapse
BT International firmware. Which is already available for download in this forum.
Ahh okies, but anyways only BT, still i set the Limits for Answers in my Post.
"So which one is the newest version Number for the 4G (Sim) Model (Int/EU version) ? "
Not bad meant, but correct Answers are decreasing the fragmentaton of the Thread.
I got build N7176C today on my BT ver.
synplex said:
I got build N7176C today on my BT ver.
Click to expand...
Click to collapse
Same here (it did not even ask on my watch, it went ahead and updated at a very bad moment), Android patch level August 1st 2017 which is decent but I do not know if it includes Blueborne fix.
xclub_101 said:
Same here (it did not even ask on my watch, it went ahead and updated at a very bad moment), Android patch level August 1st 2017 which is decent but I do not know if it includes Blueborne fix.
Click to expand...
Click to collapse
me 2.. never know it had been updated.
What's new about this firmware?
I can confirm that my Watch 2 Sports got into bootloop because of the latest update. I flashed back the old system and it got back to work fine.
The issue is it will automatically update itself and get to bootlop again. May I know how to stop the update or any update file to fix this?
mcdull said:
me 2.. never know it had been updated.
What's new about this firmware?
Click to expand...
Click to collapse
?? I cannot find changelog.
Odesláno z mého SM-T815 pomocí Tapatalk
GofreeSing said:
I can confirm that my Watch 2 Sports got into bootloop because of the latest update. I flashed back the old system and it got back to work fine.
The issue is it will automatically update itself and get to bootlop again. May I know how to stop the update or any update file to fix this?
Click to expand...
Click to collapse
anybody else has got this issue? how to disable auto updates?!?!?!
Kianush said:
anybody else has got this issue? how to disable auto updates?!?!?!
Click to expand...
Click to collapse
No wear is absolutely cut Android without basic functionalities like on off of functions. For example APN no settings, off data connection by SIM, off updates. No languages settings. No localization not keyboard, no USB mass storage profile. I have other watch with classic Android and there's setting working without problem but problem is wear. Worst what I buy from Google. Wear bad dream!
Odesláno z mého SM-T815 pomocí Tapatalk
strekib said:
No wear is absolutely cut Android without basic functionalities like on off of functions. For example APN no settings, off data connection by SIM, off updates. No languages settings. No localization not keyboard, no USB mass storage profile. I have other watch with classic Android and there's setting working without problem but problem is wear. Worst what I buy from Google. Wear bad dream!
Odesláno z mého SM-T815 pomocí Tapatalk
Click to expand...
Click to collapse
I believe they would change these thing eventually, as they added stand alone apps and keyboard, stock android is not good for these smal circular screens...otherwise I agree with you
I don't know why Google not use simple plugging to wear. Do you need Czech language download and install, do you need USB mass storage, download and install. Wear is tragicomical Google system. Very often I thinking why I have so masochistic with this tragedy. May be sell my all Android devices and go to A team. Google wear music is another bad dream app. Why this app not have ramdomly play? Why ramdomly setting is only in online? Beta wear may be right name of this Google experience on ours.
Odesláno z mého SM-T815 pomocí Tapatalk
strekib said:
I don't know why Google not use simple plugging to wear. Do you need Czech language download and install, do you need USB mass storage, download and install. Wear is tragicomical Google system. Very often I thinking why I have so masochistic with this tragedy. May be sell my all Android devices and go to A team. Google wear music is another bad dream app. Why this app not have ramdomly play? Why ramdomly setting is only in online? Beta wear may be right name of this Google experience on ours.
Odesláno z mého SM-T815 pomocí Tapatalk
Click to expand...
Click to collapse
man I think I saw your complains in about 3 other threads as well, why do you even bother using android wear if you dont like it? Im really enjoyin my watch already!
It's my first and last experience with this. I'll sell watch. Last words...
Odesláno z mého SM-T815 pomocí Tapatalk
Use your notch as a battery bar in this live wallpaper.
The pro version has customization options. Check it out!
Trial - Play store link
Pro version- customizable - Play store link
I don't need a promo code but this might be a bit tricky to get the sweet spot for the G7. This is width 800 and height 125.
Actually the screenshot isn't going to help much since it doesn't properly illustrate how it jives with the notch
markbencze said:
I don't need a promo code but this might be a bit tricky to get the sweet spot for the G7. This is width 800 and height 125.
Actually the screenshot isn't going to help much since it doesn't properly illustrate how it jives with the notch
Click to expand...
Click to collapse
Thanks! But if at all possible, please take a photo and post because like you said, a screenshot doesn't really help.
Here ya go
I used 620×105. It looks good. Definitely different way to use the notch area. But when I am in any app, it doesn't work, but I guess that is because it is just a live wallpaper.
S8ntsHaz3 said:
Here ya go
Click to expand...
Click to collapse
Looks great! I have sent you a code. Thank you so much.
I tried at 600x110 to make the bar smaller. Battery was at 97%. Only thing is, it would appear that this only works with the one supplied wallpaper and doesn't seem to work with other wallpapers. Also, I figured that I could then turn off the numerical battery display to gain some room up top. Thing is, even with the number display turned off, nothing from the top left moves over to the top right, so I'm not really gaining anything in screen real estate, but losing some where the colored bar is, and I'm stuck with only one wallpaper that can be used.
With pro version You can choose different wallpaper, just shape is not identical with LG g7, I already have asked developer to add this feature, also choose percentage on which different colors appear will be great
Wysłane z mojego LM-G710 przy użyciu Tapatalka
lukjod said:
With pro version You can choose different wallpaper, just shape is not identical with LG g7, I already have asked developer to add this feature, also choose percentage on which different colors appear will be greatView attachment 4602255
Wysłane z mojego LM-G710 przy użyciu Tapatalka
Click to expand...
Click to collapse
The latest update of pro version let's you change shape in the settings. Please try that and let me know.
Any codes left?
You guys still need more testers?
It looks good with the 600x110 settings on the trial version.
andygold said:
Any codes left?
Click to expand...
Click to collapse
I actually have 1 left. Send me a picture with the trial version installed and it's yours.
qu3becker said:
You guys still need more testers?
It looks good with the 600x110 settings on the trial version.
Click to expand...
Click to collapse
Yes, please post a photo with the wallpaper applied.
kumarsid7 said:
I actually have 1 left. Send me a picture with the trial version installed and it's yours.
Click to expand...
Click to collapse
I did, post #7 above. ?
I do like how the color changes when charging, just wish we could change the wallpaper.
Any codes left?
Pro version cost 0,5 EUR, it Can change wallpaper.
Wysłane z mojego LM-G710 przy użyciu Tapatalka
I have the pro version it's working great on my G7 Thinq spring variant... Thanks for the app.
Well that picture turned out bad. The screen shot enlarged the battery bar size, either way I have a perfect thin white line around my notch it's great
Hey,
I keep having connectivity issues on my updated OnePlus 6 Pie. After upgrade I have lost all devices connectivity, had to redo with some degree of difficulty. My car sees the phone, but I cannot route audio to the car. Spotify played over Bluetooth, but no sound in car. Tried with an iPod 7th gen and works perfect.
Has anyone experienced issues in Pie?
Thanks.
rokeno said:
Hey,
I keep having connectivity issues on my updated OnePlus 6 Pie. After upgrade I have lost all devices connectivity, had to redo with some degree of difficulty. My car sees the phone, but I cannot route audio to the car. Spotify played over Bluetooth, but no sound in car. Tried with an iPod 7th gen and works perfect.
Has anyone experienced issues in Pie?
Thanks.
Click to expand...
Click to collapse
Are you using stereo module? If so just uninstall it and problem solved, had the same issue too.
Guys... Did you notice significant audio quality drop after updating to Pie? My V4A profiles sounds terrible after update... Bass often fades back, and I can't hear it anymore. Did they mess something with Bluetooth codecs/drivers? Can you help me getting better sound quality, like I had before? In worst case I'll downgrade to Oreo...
Wysłane z mojego ONEPLUS A6003 przy użyciu Tapatalka
danielofata said:
Are you using stereo module? If so just uninstall it and problem solved, had the same issue too.
Click to expand...
Click to collapse
Lol. I do have it. I will give it a try!
danielofata said:
Are you using stereo module? If so just uninstall it and problem solved, had the same issue too.
Click to expand...
Click to collapse
Ok. That was great!!!thanks mate. Works!!