Hello, so I've changed frame on my nexus 5 yesterday because the glass was cracked. Everything went well, except for one thing: the battery doesn't look like it wants to charge. I'm stuck at 0% from half an hour, and have tried different chargers and cables, but nothing. Could this have anything to do with the fact that I changed battery with a new one (oem) too? I sort of folded the flex cable there too much, but I don't think that's the problem because the phone powers up.
What about trying the old battery in the phone? Is it possible there is a damaged connector on the motherboard or the USB port is damaged? If the phone recognized by your computer when connected via USB port?
Related
Hi everyone,
My first post as I haven't been able to find an answer. My Photon Q was probably about 30% charge when I last checked with it on. An hour or 2 later it was a little warm and was off. So I went to charge it using the car charger with 500mah charge rate. I came back about an hour later and the phone was really hot and no charging screen so I unplugged it. The green led light is lit when the phone is plugged in.
I tried holding the power button and volume down button, but it won't boot. If I have the usb charging cable plugged in from a PC or charger adapter when pressing those buttons, the green light will flicker off for a fraction of a second.
I then proceeded to dismantling the phone as I suspect a battery issue and the one in this phone is stupidly non-removable. After taking the back cover off, I tested the battery posts and received 0 volts. I still don't know if the battery caused the drain or if there's a short in the phone. I then took off the inside cover that holds the battery in. A few T5 screws later and the battery was removed. I connected the battery to some AA batteries in series to see if I could get a charge. A few hours later I got it up to 3 volts which held for several hours. So I connected it to a few more AA batteries in series to try and raise the voltage. I got it up to 3.67 volts and the battery is listed at 3.7 volts.
A day later and the voltage is still at 3.67 volts so I put the battery in the phone. I went to try and power it on, but nothing. I then connected it to a usb cord and received the slow flashing red led light a couple times before switching to green. The battery started getting warm again connected to the usb charger. After 20 minutes it was approaching hot so I unplugged the USB. The battery read 3.54 volts. 30 minutes later, 0 volts again.
Does anyone know what the actual voltage range is for this phone, as my old Samsung M320 is also 3.7 volts, but when testing the battery I get 4.10 volts? I heard it's pretty specific on minimum voltage. Any ideas for a temporary battery or way to boot the phone before spending $50 on a replacement battery and then find out there's a short in the phone. Is there another key combination to boot the phone, I'm trying to boot it to at least get my pictures and other data off it.
Thanks a lot in advance
Matt
Not the battery, seems to be an electrical short but where
I bought a new battery for the phone which had a 0 volt charge when I received it. I tried putting it in the phone as is to use the phone charger to charge it, but got nothing. So I charged it using 2, then 3 and then 4 AA batteries in series to get it up to 3.7 volts. I then put the battery in the phone and noticed the 2 large chips and the chip centered above them located by the camera get a little hot. I tried with the charger connected and not connected, but same thing. Power button doesn't turn the phone on. Just the green led lit when the USB power cable is attached. So now it seems there must be a short in the phone. Anyone know where I can look to check for a short, blown resistor or something in this phone? Or at least where the rom chip is located so maybe I can turn it into a usb drive to get my data at the least.
Anyone? I still haven't been able to find a solution. I don't see pins touching, but if some pins are touching in the usb port, would that cause the heat issues when I put a battery in that I charged externally? I do get the green led light when I plug the phone in to charge so figure that means the usb is ok?
Regal's Photon Q said:
Anyone? I still haven't been able to find a solution. I don't see pins touching, but if some pins are touching in the usb port, would that cause the heat issues when I put a battery in that I charged externally? I do get the green led light when I plug the phone in to charge so figure that means the usb is ok?
Click to expand...
Click to collapse
did you try a other charger ? do you have oryginal photon charger ? for me its not a reason of battery
regards
(in situation like that charging with normal usb cable when you plug phone to pc dont charging battery, you need motorola usb service cable to make it work)
niko99 said:
did you try a other charger ? do you have oryginal photon charger ? for me its not a reason of battery
regards
(in situation like that charging with normal usb cable when you plug phone to pc dont charging battery, you need motorola usb service cable to make it work)
Click to expand...
Click to collapse
Yep used the motorola cable that came with the phone (plugged in the wall and just the cable in multiple computers, another motorola house charger (the same as the one that came with the phone), a motorola car charger, and a samsung house charger.
When you say motorola usb service cable, I assume you're not talking about the motorola cable that comes with the phone? What usb service cable are you referring to?
Regal's Photon Q said:
Yep used the motorola cable that came with the phone (plugged in the wall and just the cable in multiple computers, another motorola house charger (the same as the one that came with the phone), a motorola car charger, and a samsung house charger.
When you say motorola usb service cable, I assume you're not talking about the motorola cable that comes with the phone? What usb service cable are you referring to?
Click to expand...
Click to collapse
factory / sevice cable ( i make my own from below tutorial)
http://forum.xda-developers.com/showthread.php?t=1077414
if you buy / make this cable , you will be have posibility to use RDS lite and flesh firmware this also make help (if you have low battery flesh with normal usb cable is not possible )
and second thing... maybe try some car charger ?
Hello everybody I had a big trouble with my htc one x (at&t evita) I don't know why It doesnt charge it's already plugged but it doesnt charge nothing, I left it last night plugged in the energy, (like 9 hours charging) and I turned it on, after those hours, but when I turned on it stopped charging at 54% of energy , and now It doesnt want to charge anything, my question is, what is going on? can be the battery or the usb entrance of the phone, Please help me I need to know what happend, if the battery died or my usb entrance got dammaged thanks in advance
I could be a number of things; you might have a faulty battery, you might have a faulty usb cable, you might have a faulty charging block, you might have damaged usb pins, the charging block mount not have been inserted into the wall outlet correctly, the usb cable might not have been inserted into the charging block properly, the usb cable might not have been inserted into the phone properly. Those are all things you need to troubleshoot. I had a similar issue a while back, and it turned out that my usb cable was simply not inserted into my charging block all the way.
Sent from my Evita
I already tried with 5 different usb chargers, and nothing happend I think it might be the battery or the usb entrance of my cell phone, but what it's more probably to fail :S
This happened to me2 days ago, I even broke my charger because of the frustration. Tried like 5 cords..
All I did was switch it off and just leave it "charging". While I was waiting to meet up with the person I was buying a new One Max I just held the power button forever and the phone came back on fully charged I was ready to move on lol
Sent from my One XL using xda app-developers app
I have looked around on this topic before posting, but nothing applies to what im experiencing
Up until this morning, I haven't had a single issue with my USB port or charging in general.
I clean flashed Purity KitKat, flashed compatible Uber kernel and installed my apps as one usually do, and let the phone charge for a while. A few hours later, I realized my battery was at 0%. I started panicking, looking for a USB replacement part, which I found for about $12 on Amazon. I decided I would download GSAM battery monitor to see if there was an issue with my charging cable.
What I saw was the mA flow was acting erratic, sometimes shooting from -700ma (yes, that's negative 700) all the way up to 1800mA. Even by just rotating the screen, it would drop instantly. . The phone charges, but a little at a time. I disabled KSM and fast charge which seemed to have a positive effect.
I'm not sure what caused this, or how to fix it, but I've attached a couple pictures to give you an idea of what I'm seeing. If it is in fact the USB port, would using a Qi charger be a good option or should I just go ahead and dismantle the phone and replace the USB port?
Note: windows still recognizes the phone and I can send files from the computer, and the charging bolt is showing.
Have you replaced the cable? Far more common for the cable to crap out then the port. Cheap or broken cables will appear to work, computer will detect phone and even display a charging indicator but it won't actually charge. Had happened to me in the past.
galakanokis said:
Have you replaced the cable? Far more common for the cable to crap out then the port. Cheap or broken cables will appear to work, computer will detect phone and even display a charging indicator but it won't actually charge. Had happened to me in the past.
Click to expand...
Click to collapse
Yeah I've tried numerous chargers including my car charger. They all charge, but it took 12 hrs from 0 to 100
Kroniq said:
Yeah I've tried numerous chargers including my car charger. They all charge, but it took 12 hrs from 0 to 100
Click to expand...
Click to collapse
Try flashing the stock rom to rule that variable out. If you want to be sure that is the usb port you could try with a wireless charger as it could also be the battery, you can find a new one at the same price range of the port.
It does seems a lot like what happened when both the stock charger and the cable were damaged. I tried to charge the phone and when disconnected it had less charge.
Hello guys, i am hoping that you can help me because i don't know where else to turn. I purchased a Verizon note pro 12.2. I was using it and on for about two weeks until i got my surface 3. Two days ago i went to use it and it wouldnt turn on. I assumed it was the battery so i put it on the original charger for about an hour and attempted to turn it on. It booted to the Verizon logo then flickered off. I put it back on the charger overnight thinking that would fix the problem. When i attempted to turn it back on it loaded to the Samsung splash screen and then turned off again. When i plugged in the charger once again the grey battery icon came up saying the battery was 100%. Even with the battery saying it was 100% it still wont turn past the splash screen. This only happens when it connect to the charger. it doesn't do anything at all if it is not plugged in. I have taken the battery out and reconnected it... still nothing. Looking at other post i assumed it was a software issue so i tried to sideload a stock version (Cant use odin because the tablet cant even boot into odin mode) of P905VVRUANK1 which is what the tablet was running. I got the error footer is wrong security authentication failure. I dont know what to do. Please help!!
correction i did not sideload (wrong terminology) i tried to flash through recovery mode.
mcdobson said:
correction i did not sideload (wrong terminology) i tried to flash through recovery mode.
Click to expand...
Click to collapse
Probably you have a loose or cracked battery connector. Try this, power on while pressing hard on the back near the center ( location of battery connector ). If it can boot this way, you need to re solder the battery connector.
Beut said:
Probably you have a loose or cracked battery connector. Try this, power on while pressing hard on the back near the center ( location of battery connector ). If it can boot this way, you need to re solder the battery connector.
Click to expand...
Click to collapse
I have tried this but still nothing. I also switched out the battery with another note pro and that tablet powered on with no power. when i tried to use that battery in mine i still got the same result.
mcdobson said:
I have tried this but still nothing. I also switched out the battery with another note pro and that tablet powered on with no power. when i tried to use that battery in mine i still got the same result.
Click to expand...
Click to collapse
I have seen this problem in many Tab Pro or Note Pro: it cannot turn on even with full battery. When battery connector's pins are open or cracked, your tablet won't be able to turn on. There are too many unknowns such as USB charging port, battery connector, or battery. You need this tool to find out where is the problem:
http://www.ebay.com/sch/i.html?_fro....TRS1&_nkw=usb+voltage+current+meter&_sacat=0
When charging, current should be 1.7 Amps.
It sounds silly but I see many users cannot figure out the problem which simply comes from bad USB cable or charger or USB charging port. This tool will eliminate guessing.
Since checking battery connector requires experiences to know the solder joints are good or bad. My recommendation for your problem: Re solder the battery connector if everything else: USB cable, charger, USB port, battery are in good working condition.
Use another battery you won't see the difference if battery connector on main board is cracked or loose.
Cracked battery connector is very common in this tablet but most average users won't see it or don't understand why it's the source of problem.
Beut said:
I have seen this problem in many Tab Pro or Note Pro: it cannot turn on even with full battery. When battery connector's pins are open or cracked, your tablet won't be able to turn on. There are too many unknowns such as USB charging port, battery connector, or battery. You need this tool to find out where is the problem:
http://www.ebay.com/sch/i.html?_fro....TRS1&_nkw=usb+voltage+current+meter&_sacat=0
When charging, current should be 1.7 Amps.
It sounds silly but I see many users cannot figure out the problem which simply comes from bad USB cable or charger or USB charging port. This tool will eliminate guessing.
Since checking battery connector requires experiences to know the solder joints are good or bad. My recommendation for your problem: Re solder the battery connector if everything else: USB cable, charger, USB port, battery are in good working condition.
Use another battery you won't see the difference if battery connector on main board is cracked or loose.
Cracked battery connector is very common in this tablet but most average users won't see it or don't understand why it's the source of problem.
Click to expand...
Click to collapse
I do not believe that is the issue. the charger i used after the fact was a samsungng 5.3v charger thats belongs to the other note pro. im assuming if it was a issue with the amp that the other note pro would have the same issue... could it have something to do with the bootloader maybe.... or maybe theres a file i could flash that im just not aware of...
mcdobson said:
I do not believe that is the issue. the charger i used after the fact was a samsungng 5.3v charger thats belongs to the other note pro. im assuming if it was a issue with the amp that the other note pro would have the same issue... could it have something to do with the bootloader maybe.... or maybe theres a file i could flash that im just not aware of...
Click to expand...
Click to collapse
Beut was right all along...
Hi guys,
I've got a big Problem with my beloved N5.
I cannot charge my battery anymore. I tried everything!
I replaced the battery with a newer one, I replaced the whole USB-Port (incl. flex board/plate).
I cleaned all connectors,
I tried this one : https://forum.xda-developers.com/showpost.php?p=60863601&postcount=10
I tried different ROMs,
I tried different charger/cables.
The USB-Port is working for data connection with my laptop, but if I plug in the battery cable for charging, it charge for ~1-2 sec. and than stops. Also with the induction charger.
Any ideas what I can do? Im helpless
I also read sth about a counter/timer for 25 months or sth like that, for "killing" this function by google/lg, so you buy a new phone..
Any suggestions?
Where did you get the battery and USB flex cable? Does it have the same problem with the original USB flex cable or original battery?
audit13 said:
Where did you get the battery and USB flex cable? Does it have the same problem with the original USB flex cable or original battery?
Click to expand...
Click to collapse
Hi,
I'd bought this parts from an ebay shop.
Yeah, the same problems with the original parts, too :/