I have just recently installed an exposed module on my device, I installed the multi window sidebar, unfortunately it didn't work well on the Z3.. Maybe it's just me, I don't know. So I disable the xmulti_window module, then uninstall it at my homescreen.. I could had have uninstall it at the xposed installer.. But instead I do it at the homescreen like uninstalling normal apps.
Could this effect the device in anyway? I did reboot after the uninstall though.
RevUp said:
I have just recently installed an exposed module on my device, I installed the multi window sidebar, unfortunately it didn't work well on the Z3.. Maybe it's just me, I don't know. So I disable the xmulti_window module, then uninstall it at my homescreen.. I could had have uninstall it at the xposed installer.. But instead I do it at the homescreen like uninstalling normal apps.
Could this effect the device in anyway? I did reboot after the uninstall though.
Click to expand...
Click to collapse
No that's fine, no worries
Jkay7 said:
No that's fine, no worries
Click to expand...
Click to collapse
Thank You for the reply
Related
I uninstalled xmultiwindow module and some apps still appears in split mode. What to do?
jakubekw1997 said:
I uninstalled xmultiwindow module and some apps still appears in split mode. What to do?
Click to expand...
Click to collapse
First of all, install it again and then disable the additional apps you see, then first unactivate the module, then proceed to uninstalling it
Well , did it but i think that this one app does it specially
I'm trying to install Xposed on my G2 Mini so that I can block the volume buttons on the back as they're driving me mad constantly taking photos in my pocket. I've installed G2 Xposed, downloaded an .apk Xposed Installer it prompted me to but when I go to it and try to install the framework, it says that Xposed is not yet compatible with SDK 21 or my CPU architecure (armeabi-v7a) and below, there is such info:
CANNOT LINK EXECUTALE: could not load library "libdcm.so" needed by "/data/data/de.robv.android.xposed.installer/cache/app_process"; caused by library "libdvm.so" not found
Click to expand...
Click to collapse
Why is that so? How can I install Xposed, then? I need to cause it seems it's the only way to use G2 TweaksBox to block the aforementioned buttons and from what I read, people have installed Xposed with no problem on G2 Mini.
Have you installed BusyBox? Xposed needs BusyBox to work.
Planterz said:
Have you installed BusyBox? Xposed needs BusyBox to work.
Click to expand...
Click to collapse
Oh... No I didn't, didn't know that. So should I install it now on top of the G2 Xposed and Xposed Installer or should I first uninstall everything and then install it one by one (BusyBox -> Xposed -> Xposed Installer)?
Tigrowski said:
Oh... No I didn't, didn't know that. So should I install it now on top of the G2 Xposed and Xposed Installer or should I first uninstall everything and then install it one by one (BusyBox -> Xposed -> Xposed Installer)?
Click to expand...
Click to collapse
Install BusyBox, then Xposed., then your modules. I don't think there's any need to uninstall, just do it in that order and reinstall if it asks, and reboot when it says.
Enough said really. If you don't know about GravityBox module, you can use it to perform a good amount customization on menus, button actions, lock screen, etc. For example, 30 volume step mod, circle battery with percentage, randomization of pin numbers on lockscreen, extended power menu with reboot options/screenshot/screen recording, etc.
Grab the regular (NOT the non FBE version).
It can be found here: https://forum.xda-developers.com/xposed/modules/app-gravitybox-v7-0-0-tweak-box-android-t3653953
If you don't have Xposed systemless installed, download and install the sdk25 version (download zip and add module from magisk manager) from here: https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
As always, Xposed systemless framework enabled will cause SafetyNet to fail. So if you want to use Snapchat, Android Pay, Pokemon GO, Mario GO, new versions of Netflix, etc.; you'll have to disable the framework and then reboot currently. This hasn't been an issue for me so far!
Have you had any luck with any Magisk's modules? I can't get them to work. I can't get any black out apps to work via TRWP flashing either. It's gotta have sitting to do with the a/b partition, right?
Sent from my PH-1 using Tapatalk
Cool
Airwolf79 said:
Have you had any luck with any Magisk's modules? I can't get them to work. I can't get any black out apps to work via TRWP flashing either. It's gotta have sitting to do with the a/b partition, right?
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
The Xposed framework systemless v88.2 is the only module I actually have in magisk. Most magisk modules don't seem to have been updated for the magisk systemless 14+ betas.
Ok, after a couple of reboots, I got a few of them to work. BusyBox, Greenify, and the black themed injected YouTube back ground playback (which is amazing BTW) are all working now. Although, my phone doesn't pass safetynet now.
Does status bar colouring work on GravityBox on the Essential? I ask because colouring the status bar black across all system and apps would basically give an illusion of equal top and bottom bezels but with light up notifications and icons which imo would look pretty cool and hide the camera notch.
manaox2 said:
Enough said really. If you don't know about GravityBox module, you can use it to perform a good amount customization on menus, button actions, lock screen, etc. For example, 30 volume step mod, circle battery with percentage, randomization of pin numbers on lockscreen, extended power menu with reboot options/screenshot/screen recording, etc.
Grab the regular (NOT the non FBE version).
It can be found here: https://forum.xda-developers.com/xposed/modules/app-gravitybox-v7-0-0-tweak-box-android-t3653953
If you don't have Xposed systemless installed, download and install the sdk25 version (download zip and add module from magisk manager) from here: https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
As always, Xposed systemless framework enabled will cause SafetyNet to fail. So if you want to use Snapchat, Android Pay, Pokemon GO, Mario GO, new versions of Netflix, etc.; you'll have to disable the framework and then reboot currently. This hasn't been an issue for me so far!
Click to expand...
Click to collapse
I installed the regular gravity box and it's just an apk. How do I get the gravity box module? Is there a difference? If so could u give steps? And thanks Xposed is installed and in the magisk manager folder. I just can't figure out how to install gravity box
treIII said:
I installed the regular gravity box and it's just an apk. How do I get the gravity box module? Is there a difference? If so could u give steps? And thanks Xposed is installed and in the magisk manager folder. I just can't figure out how to install gravity box
Click to expand...
Click to collapse
You need to install the xposed framework apk as well located in the attachments of the xposed systemless thread in order to enable and manage xposed modules. Found here: https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268 and called XposedInstaller_3.1.4_Magisk.apk
manaox2 said:
You need to install the xposed framework apk as well located in the attachments of the xposed systemless thread in order to enable and manage xposed modules. Found here: https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268 and called XposedInstaller_3.1.4_Magisk.apk
Click to expand...
Click to collapse
I got it. Been a while. Thanks
---------- Post added at 01:52 AM ---------- Previous post was at 01:23 AM ----------
manaox2 said:
You need to install the xposed framework apk as well located in the attachments of the xposed systemless thread in order to enable and manage xposed modules. Found here: https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268 and called XposedInstaller_3.1.4_Magisk.apk
Click to expand...
Click to collapse
I have a question for ya. Do u know where to find the recent app settings in gravity box. I can't find them. I want to switch to bottom right. It's been so long since I've used it and it's changed. Thanks
This is great, thanks for the headsup. Being able to use GB+xp makes running stock an awesome experience AND I get to use the 360 cam.
The cam is really the catz azz .
don't use AP as my cc app works regardless.
Zo0
On b3 and looking for a stable magisk that won't break my wifi .. so many headaches trying to get magisk to work on essential ..want Xposed again
I have no issues with Wifi, using Magisk 15.3, installed following the root guide.
Can gravitybox unlink system volume and ringtone volume in oreo? Thanks.
How do I add it in magisk? When I click the plus I can select the zip but?
I have tried all possible ways. I have latest swift installer installed on my Op7 pro but can't uninstall/disable them. I even can't update the overlays. Even tried flashing pie rescue zip in TWRP and it didn't work.
Did you disable the module? Flashing the zip isn't going to get rid of Magisk modules .. that is the point.
-- Brian
Uninstall any Substratum themes and reboot before you try to do anything with Swift. You can reinstall them after removing/updating the Swift theme.
runningnak3d said:
Did you disable the module? Flashing the zip isn't going to get rid of Magisk modules .. that is the point.
-- Brian
Click to expand...
Click to collapse
Yep already tried disabling module but didn't work
I also have the same issue, Tried deleting the overlays in /system /app does nothing I guess it's borked on this version of OOS.
Aphex13 said:
Uninstall any Substratum themes and reboot before you try to do anything with Swift. You can reinstall them after removing/updating the Swift theme.
Click to expand...
Click to collapse
Thanks man it worked
liam_davenport said:
I also have the same issue, Tried deleting the overlays in /system /app does nothing I guess it's borked on this version of OOS.
Click to expand...
Click to collapse
First uninstall every enabled/disabled substratum module than reboot then uninstall overlays from swift installer and that worked for me
hetshah147 said:
First uninstall every enabled/disabled substratum module than reboot then uninstall overlays from swift installer and that worked for me
Click to expand...
Click to collapse
I don't use sh!tstratum, I use 0 modules Just Magisk/Swift installer on 9.5.8
Edit: Deleting the overlay in TWRP file manager worked fine.. Forgot this feature existed :laugh:
I had this same issue ..It's like it's clued to the phone .lol..I even format my data
Disable the magisk module & reboot.
What is the right way to completely uninstall viper4android??
I clean cache and data from the application, then disable the magisk module and then I just uninstall the app itself.. But I can't get rid of the com.pittvandewitt.viperfx inside superuser?! It stays.. I want to delete anything has to do with viper as I found wavelet efficient enough and does not interfere with my bluetooth devices...
Chrisnik said:
What is the right way to completely uninstall viper4android??
I clean cache and data from the application, then disable the magisk module and then I just uninstall the app itself.. But I can't get rid of the com.pittvandewitt.viperfx inside superuser?! It stays.. I want to delete anything has to do with viper as I found wavelet efficient enough and does not interfere with my bluetooth devices...
Click to expand...
Click to collapse
That's not a file, it's just a history of ROOT access added in Magisk.
Can I delete it?! I feel awkward seeing it...
Chrisnik said:
Can I delete it?! I feel awkward seeing it...
Click to expand...
Click to collapse
You can by clearing the data of the Magisk app.
Chrisnik said:
Can I delete it?! I feel awkward seeing it...
Click to expand...
Click to collapse
Go into /data/adb/modules and delete the module.
JohnTheFarm3r said:
You can by clearing the data of the Magisk app.
Click to expand...
Click to collapse
If I do so I will have to install all modules and settings at magisk app again from the beginning?! Will it cause any conflicts?
Chrisnik said:
If I do so I will have to install all modules and settings again from the beginning?!
Click to expand...
Click to collapse
You'll need to re-do the settings and probably re-enable the modules. There is no guarantee when you're doing ANY kind of "modding" on your device, so you need to live with it if something goes wrong.
JohnTheFarm3r said:
You can by clearing the data of the Magisk app.
Click to expand...
Click to collapse
I did it but when I re-open the app everything is intact as i left it..
If I have completely uninstalled magisk and I am unrooted can I flash the patched img back for magisk without a pc? Or only with pc via fastboot and terminal command?!
Everything is solved thank you all very much it can be deleted