I tried to root a gt-5100 but in the odin 3.10.7 the cwm i tried it failed.Then i switched the tablet off to try it again and it stuck in the firmware upgrade encountered an issue screen.I tried to install the original rom but it doesn't get added in the odin anymore.Also i can't enter either download mode or recovery mode.Any tips?
T_K_L_L_LUIGI said:
I tried to root a gt-5100 but in the odin 3.10.7 the cwm i tried it failed.Then i switched the tablet off to try it again and it stuck in the firmware upgrade encountered an issue screen.I tried to install the original rom but it doesn't get added in the odin anymore.Also i can't enter either download mode or recovery mode.Any tips?
Click to expand...
Click to collapse
when you flashed the cwm in odin it showed passed? or showed failed? did you put the file in PDA section?
did it reboot itself, or did you interfered? what were the tick status in reparation or auto reboot?
without recovery or download mode, there is nothing much you can do.
billysam said:
when you flashed the cwm in odin it showed passed? or showed failed? did you put the file in PDA section?
did it reboot itself, or did you interfered? what were the tick status in reparation or auto reboot?
without recovery or download mode, there is nothing much you can do.
Click to expand...
Click to collapse
It showed failed,then i thought it would be best if i switch the device off and switch the usb port,but when i opened it,it show that message.Yes i did put it int he pda section.
UPDATE!!!
I discharged the tablet,and charged it for hours,i have been trying to make it work but nothing happend,but then i tried to plug it in some d-link usb extender and i had two odin (3.07 and 3.10.07) opened at the same time.Windows were making the sound of plug in and plug out every few seconds then i got that screen in my odin 3.10.7
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/004> Added!!
and on the odin 3.07 i have almost the same then i forced it because it got removed so fast all the time to install the official kernel and i got this.
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5100XWALD7_P5100OXXALD9_P5100XXLD7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> recovery.img
<ID:0/003> modem.bin
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
And now i am waiting for my tablet to open,i will update this thread again.
Such behaviour looks like a faulty data cable.
still you managed to flash it. Great!! Good Luck and do update here
Ok i managed to get it working the tablet is working with the official 4.0.4,BUT i can't access download mode or recovery mode if i have the tablet connected to the pc.If i disconnect the tablet from my pc i can access download mode and recovery mode,but when i go to download mode and connect it then to the pc odin doesn't recognized it.Also if the tablet is running odin can see it connected.How should i proceed?I really want to root it and install a new rom.
T_K_L_L_LUIGI said:
Ok i managed to get it working the tablet is working with the official 4.0.4,BUT i can't access download mode or recovery mode if i have the tablet connected to the pc.If i disconnect the tablet from my pc i can access download mode and recovery mode,but when i go to download mode and connect it then to the pc odin doesn't recognized it.Also if the tablet is running odin can see it connected.How should i proceed?I really want to root it and install a new rom.
Click to expand...
Click to collapse
if you can't get it connected through Odin, there is flashify app. it can help you flash recovery and SuperSU as well. try it.
sorry maybe you wont be able to get root from flashify..I think it needs root first.. there is framaroot and baidu app as well or kingo root and other few rooting apps for windows which root your device from PC, since you can connect your device to PC, you can root from there
still some how I feel it's a faulty cable. see if you can get it without odin. I once had problem with getting my tab detected on PC, then I tried baidu app that time, it was in Chinese and I had no option or understanding what the app would do, only thing in English was "root" and I got it that time . but it was long ago. I got rid of the old cable and got new and was fine once again.
billysam said:
if you can't get it connected through Odin, there is flashify app. it can help you flash recovery and SuperSU as well. try it.
sorry maybe you wont be able to get root from flashify..I think it needs root first.. there is framaroot and baidu app as well or kingo root and other few rooting apps for windows which root your device from PC, since you can connect your device to PC, you can root from there
still some how I feel it's a faulty cable. see if you can get it without odin. I once had problem with getting my tab detected on PC, then I tried baidu app that time, it was in Chinese and I had no option or understanding what the app would do, only thing in English was "root" and I got it that time . but it was long ago. I got rid of the old cable and got new and was fine once again.
Click to expand...
Click to collapse
Thanks i will try it.
T_K_L_L_LUIGI said:
Thanks i will try it.
Click to expand...
Click to collapse
If u dont get it booted or stuck in a boot logo after flashing firmware with Odin, just go to the recovery and perform a factory reset and you are good to go.
If you want to root your device use kingroot this time it is much safer and faster but you need a PC for it.
If you are interested you can ask me.
Thanks ZTeblade l for the answer,but i end up giving the tablet to a friend of mine i didn't have time to root it,so the thread can close.
Related
Hello guys,
i have problem with my P6810 16gb Wifi tablet, the problem started when i flashed CWM touch and then my touch screen stoped working so i tried to flash firmware and i got odin fail, from then when i turn it on it says "Firmware upgrade encountered an issue.Please select recovery mode in Kies & try again"..
Odin message:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P6810OZSLP8_P6810ZSLP8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
How can i fix this problem?
Cheers!!
bajki_ktm said:
Hello guys,
i have problem with my P6810 16gb Wifi tablet, the problem started when i flashed CWM touch and then my touch screen stoped working so i tried to flash firmware and i got odin fail, from then when i turn it on it says "Firmware upgrade encountered an issue.Please select recovery mode in Kies & try again"..
Odin message:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P6810OZSLP8_P6810ZSLP8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
How can i fix this problem?
Cheers!!
Click to expand...
Click to collapse
If you have kies installed in your computer, please try to disable or uninstalled it. As I know, Samsung KIES and ODIN could not get along with together....
cakrabayu said:
If you have kies installed in your computer, please try to disable or uninstalled it. As I know, Samsung KIES and ODIN could not get along with together....
Click to expand...
Click to collapse
I don't have installed KIES..
Sorry....Did you follow this guide while using odin? http://forum.xda-developers.com/showthread.php?t=1469635 just wondering why you encounterred a problem. Thx.
Sent from my GT-P6800
cakrabayu said:
Sorry....Did you follow this guide while using odin? http://forum.xda-developers.com/showthread.php?t=1469635 just wondering why you encounterred a problem. Thx.
Sent from my GT-P6800
Click to expand...
Click to collapse
I was doing everything like in tutorial, tablet was full charged and i got this error, that's the story..
What could possibly go wrong?
bajki_ktm said:
I was doing everything like in tutorial, tablet was full charged and i got this error, that's the story..
What could possibly go wrong?
Click to expand...
Click to collapse
Really sad about your problem bro.... something wrong with the procedure or your firmware.. there are many cases like you.. you can refer to :
http://androidforums.com/samsung-ga...help-firmware-flashing-failed-using-odin.html
http://forum.xda-developers.com/showthread.php?t=1877308&page=2
http://forum.xda-developers.com/showthread.php?t=1984717
http://forums.whirlpool.net.au/archive/1919243
but it is up to you to give it a try. Luckily for me, I did not encounter the same problem like yours while flashing with pc odin. I prefer using mobile odin. it is safe and easy. Good luck bro...
I am having the same issue on my P6810 (16gb). I cannot use the emergency recovery in Kies because I don't have the recovery code that it asks for (I bought the device as used faulty so don't know the update history). When I try to use the firmware upgrade / initialisation function to reset the tablet, Kies downloads the firmware but fails to connect to the tablet when I plug it in (in download mode, which I can access).
I have tried flashing a downloaded firmware using Odin3 v1.85 and it appears to start okay and copies cache.img but quickly hangs at the factoryfs.img stage.
I have tried different both win7x64 and winXP PCs with no success. I did try Heimdall, which uses a different USB driver, and while I did not have an appropriate Heimdall compatible firmware to flash, I was able to get a display of the current PIT information, so the tablet was communicating OK.
Does my device need repartitioning? I have seen many references to a PIT file, but don't know where to download it from.
This seems to be a common problem from what I can tell so far.
Any help appreciated.
Thanks.
Hello i have the same problem. I read all of your suggestions and guess that should be use a pit-file. Is this overwrite a system. I have troubled ROM compiled and want to install the new one downloaded from sammobiles fo my country. Am I right? Please help me?
Hello,
I can't hold it anymore:
I wanted to overclock to 1.5 ghz. So I flashed with Odin to 4.1.2.
Then I installer CWM, BUT, it was a wrong version or something, for 4.2.2.
At first, it only didnt load Recovery Mode, ok.
But after trying again, I get:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
What now? Just use Kies?
I can't access anything, download mode, recovery mode, nothing works.
BUT: Odin still detects it.
It was rooted, so does Kies work then?
EDIT:
Now, I took out the battery for any minutes. I put it back in, and now I am able to go into the download mode.
I hope/think I can fix the problem now. Because the problem came after Odin said it was failed (CWM).
sunniebeta said:
Hello,
I can't hold it anymore:
I wanted to overclock to 1.5 ghz. So I flashed with Odin to 4.1.2.
Then I installer CWM, BUT, it was a wrong version or something, for 4.2.2.
At first, it only didnt load Recovery Mode, ok.
But after trying again, I get:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
What now? Just use Kies?
I can't access anything, download mode, recovery mode, nothing works.
BUT: Odin still detects it.
It was rooted, so does Kies work then?
EDIT:
Now, I took out the battery for any minutes. I put it back in, and now I am able to go into the download mode.
I hope/think I can fix the problem now. Because the problem came after Odin said it was failed (CWM).
Click to expand...
Click to collapse
Flash the stock rom via ODIN and then wipe data(factory reset) and wipe cache partition and reboot
DenisRonaldo798 said:
Flash the stock rom via ODIN and then wipe data(factory reset) and wipe cache partition and reboot
Click to expand...
Click to collapse
no need for wipe data
CoolDevelopment said:
no need for wipe data
Click to expand...
Click to collapse
This is what i'm doing after flashing a stock rom.Sorry for the mistake I was just trying to help
Ok, I am flashing it now with Odin, 4.1.2.
I think it works, thanks for the help.
But I have another question:
Which CWM is safe with 4.1.2? Can you give a topic link?
sunniebeta said:
Ok, I am flashing it now with Odin, 4.1.2.
I think it works, thanks for the help.
But I have another question:
Which CWM is safe with 4.1.2? Can you give a topic link?
Click to expand...
Click to collapse
Here is the first one I found: http://forum.xda-developers.com/showthread.php?t=2247394
Sent from my GT-I9105P using XDA Premium 4 mobile app
sunniebeta said:
Ok, I am flashing it now with Odin, 4.1.2.
I think it works, thanks for the help.
But I have another question:
Which CWM is safe with 4.1.2? Can you give a topic link?
Click to expand...
Click to collapse
If you flash 4.1.2 coming from 4.2.2 you need to wipe data
EnergySnail said:
Here is the first one I found: http://forum.xda-developers.com/showthread.php?t=2247394
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
This one bricked my phone, now again.
What I get with Odin
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9105PXXAMC2_I9105PPHNALL3_I9105PXXAMC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> vc-firmware.img
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> BcmCP.img
<ID:0/003> dt-blob
<ID:0/003> cache.img
<ID:0/003> system.img
<ID:0/003> hidden.img
<ID:0/003> param.lfs
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Removed!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
It failed when it was still writing.
So does anyone have a CWM version, which works with Android 4.1.2?
CoolDevelopment said:
If you flash 4.1.2 coming from 4.2.2 you need to wipe data
Click to expand...
Click to collapse
Then I was right
when you reach the kies warning message, you are able to use Odin also if you don't are in download mode.
and remember, the phone should not be bricked until you can't power on it anymore!
anyway, try to change the USB cable/PC.
when I formatted the PC I also had problems similar like this.
Sent from my GT-I9105P using xda app-developers app
Hello all,
My tablet note 10.1 N8000 (3G, Wi-Fi, 16 GB) suddenly got stuck in bootloop. I was not trying to flash anything when it did so, nor did I flashed anything recently before the bootloop (although it seemed to constantly freeze before the bootloop when trying to switch between my two whatsapp accounts that I have using Titanium Backup which allows creating more than one account in all apps).
I did however root the device when I bought it in 2012 and it was the only time I did so, and I still have USB debugging mode on.
The device would bootloop in the first Samsung logo most of the time, but on rare occasions it would move to the second animated logo and get stuck repeating the animation forever.
I can only access Odin Download mode, but cannot access recovery mode (when I try to do so, it shows the first Samsung logo, then attempts to go into recovery but only shows a lit black screen then reboots).
Here are the steps I did (might help some of you, but unfortunately didn't help me):
1) I tried flashing a custom recovery (CMW, Philz touch, TWRP, and stock recovery) through Odin (Odin 3 version v3.10.6):
- Put the .tar file in AP slot then put device in download mode (power key + volume down), then plug device into my computer.
- Check only auto restart and F. time reset.
- Here's what it says after flashing:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
2) I tried flashing stock rom through Odin:
(Roms I tried: N8000XXCMF1, N8000XXUDOF1, N8000XWALG7, N8000XXCMA2, N8000XXUDOF1)
- I put the .tar.md5 file in AP and follow same steps above, here's what Odin says after flashing:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> sboot.bin
<ID:0/003> system.img
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
3) I tried following the post here:
http://forum.xda-developers.com/galaxy-note-10-1/general/n8000-stuck-samsung-logo-t3212923
I followed everything until the part where I have to access recovery (because I could not access recovery still to flash rom from recovery). Here's what it says in Odin after it's done:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300_Repair_efs.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> efs.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
But again it did not work even though it always says "PASS"! And I also tried flashing stock rom after trying this method through Odin, shows success but still stuck in bootloop.
I don't know what else to try really. I will not take it to support to fix it, either I fix it myself or use it as a cutting board.
If anyone has any ideas please reply. I'm sure there are more things to try.
EDIT:
- Is there a way to clear cache without accessing recovery (since I can't access it)? Lots of people say it worked after clearing cache.
- Is Nand erase all an option? I wish someone would explain it in details instead of telling me not to do it without saying exactly why.
- Could the problem be in hardware? How can I know if so?
NaND ERASE WILL KILL THE PRODUCT .
JJEgan said:
NaND ERASE WILL KILL THE PRODUCT .
Click to expand...
Click to collapse
So you mean that it will erase everything even the Odin download mode and the Samsung logo? Why would they include this option then? I don't see any practical use of it :/
No help?
RHAddict said:
So you mean that it will erase everything even the Odin download mode and the Samsung logo? Why would they include this option then? I don't see any practical use of it :/
Click to expand...
Click to collapse
Odin is a tool that we are able to borrow .
You could try recovery via KIES .
RHAddict said:
No help?
Click to expand...
Click to collapse
HI RHAddict,
It happened to my Note GT-N8000, if a Hardware failure. If you send to SAMSUNG service center it will cost u around US$ 200 for motherboard replacement. But i manage to find a mobile service center, the technician said it only 1 of the chip in motherboard out of service. I got my tablet fixed just US$ 50-60. Now is working as is it before.
TQ
My Samsung 8010 has just gone exactly the same way. Cannot enter recovery mode, just get a blank lit screen for a second then goes back into a reboot cycle and never gets past the Samsung logo. Did you get anywhere with fixing it, or have you given up? Was thinking of taking mine to a service centre, but probably not worth it?
Hi everyone,
On my S6 all of a sudden I got the blue screen saying that I need to connect it with Smart Switch for a Recovery. Smart Switch wont recognize the S6. So I tried with Odin to flash a new stock firmware but I keep getting NAND Write Operation Failed after boots.img.
This phone hasnt been used for several months, but I want to recover it because there are very valuable holiday photos on it. So the internal memory cant be wiped. I a hoping that flashing a stock rom will make the phone boot again.
Odin Log
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried various stock roms and also various usb cables. The phone was last used in the 1st week of october, so the first rom (6.0.1.) I tried to flash was the lastest prior to it (september). After that I tried August and then I jumped in time to January because I read about a rollback isnt possible. After January (the last month for 6.0.1) I decided to try the latest stock rom avaible for 7.0.
My phone is unbranded but just incase I also tried the 3 branded roms for my country (the netherlands) for vodafone, T-Mobile and Ben. All tried roms gave the same response as stated above.
I also tried to unpack the tar file and use TarCreator to create a separate Tar file for each .img. Then flash them 1 by 1 in Odin. But again the same Nand write error is given.
Odin versions that I used: 1.85 and 1.10.6
Things I didnt try yet:
Pit I kept the Pit empty on Odin. After some research it still wasnt clear to me if using a stock Pit file would not wipe the internal memory.
I hope some here could clarify that. And if I can safely use a Pit file, do i then 1st run the pit file, restart Odin and then flash the Rom. Or can i just enter them both at the same time/session?
BootloaderI found some info that said that boatloader might be corrupted? Again also about that I couldnt find a clear answer if it would wipe the internal memory. Also I am not sure where to find good boatloader files.
I've spend now 3 days on google searching solutions and trying different roms and I dont know what to try next. I hope one of the experts on this forum might know another solution or can give a clear answer on the Pit or Boatloader options.
Kind regards.
Try with Newest ODIN (3.12.7) instead of a Very Old ODIN for at Android 2.2 only (3.08) -> thedroidguru.com/download-latest-odin-odin3-all-versions-full-collection
Illutorium said:
Try with Newest ODIN (3.12.7) instead of a Very Old ODIN for at Android 2.2 only (3.08) -> thedroidguru.com/download-latest-odin-odin3-all-versions-full-collection
Click to expand...
Click to collapse
Thanks! Somehow I was under the assumption that 3,18 was higher but I see the mistake now.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1207)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
After boot.img the phone turns off black screen, then goes back to the smart switch recovery screen. Gave it a few more tries and tried with Auto Boot enable and disabled. After the last attempt the phone screen stays black, even when plugged into the charger
Also Ive noticed that the right side of the phone now gets very hot when plugged in.
The screen still stays black. The phone wont even turn on anymore :/
Flashing stock will wipe your data anyway. There is a chance it won't format your internal storage though. If there is VERY important data, you should go to a professional data recovery service.
So i recently flashed lineage 14.1 j7ltespr to my J700p, and the rom loaded up fine, but it won't recognize the sim card. As this is my daily driver that can't be the case, so i tried to flash a stock rom back on. I think i could get it to work, but the phone won't boot into bootloader anymore.
It has the most recent version of twrp for the model. And it will system boot, and boot recovery just fine. But when i try to boot loader, it just gives me a charging symbol, and freezes. I've been trying to fix this anyway i can for the last 12 hours.
I also tried adb, and odin. Odin gives me an auth error every time i try to load a stock rom. If anyone could help, i'd be very appreciative.
I'd take fixing the sim not found, the bootloader not coming up, or the NAND Write Start!! FAIL! (Auth) error
thank you for your time
J700P
tjjc4 said:
So i recently flashed lineage 14.1 j7ltespr to my J700p, and the rom loaded up fine, but it won't recognize the sim card. As this is my daily driver that can't be the case, so i tried to flash a stock rom back on. I think i could get it to work, but the phone won't boot into bootloader anymore.
It has the most recent version of twrp for the model. And it will system boot, and boot recovery just fine. But when i try to boot loader, it just gives me a charging symbol, and freezes. I've been trying to fix this anyway i can for the last 12 hours.
I also tried adb, and odin. Odin gives me an auth error every time i try to load a stock rom. If anyone could help, i'd be very appreciative.
I'd take fixing the sim not found, the bootloader not coming up, or the NAND Write Start!! FAIL! (Auth) error
thank you for your time
Click to expand...
Click to collapse
Can you go into settings an turn off adb root then you should be able to flash stock from Odin ! Use Odin 3.12.5 !!
peter couniaz said:
Can you go into settings an turn off adb root then you should be able to flash stock from Odin ! Use Odin 3.12.5 !!
Click to expand...
Click to collapse
Thank you peter for the advice. I tried what you suggested. Still no luck. Here is the output of the odin runs, they were all identical though i tried different roms, 3 different versions of odin, root on and off, as well as with debugging on and off. Same out put every time.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 2970 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Also the output on the download screen on the phone throws this error
SW REV CHECK FAIL : [aboot] Fused 2 > Binary 1
I hope that helps.
J700P
tjjc4 said:
Thank you peter for the advice. I tried what you suggested. Still no luck. Here is the output of the odin runs, they were all identical though i tried different roms, 3 different versions of odin, root on and off, as well as with debugging on and off. Same out put every time.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 2970 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Also the output on the download screen on the phone throws this error
SW REV CHECK FAIL : [aboot] Fused 2 > Binary 1
I hope that helps.
Click to expand...
Click to collapse
It all or nothing on this if you can get into recovery factory reset then wipe system an go into download mod an try Odin one last time ! But before all that make shore debugging is on an make shore you are using a Samsung usb cord best the one that came with the phone ! An use Odin 3.12.5 or older 3.13.01 doesn't work right for that phone !!! PS make the firmware file isn't mest up ! Get the latest firmware file !